upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
493 lines
11 KiB
493 lines
11 KiB
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2015 Google, Inc
|
|
*
|
|
* (C) Copyright 2008-2014 Rockchip Electronics
|
|
* Peter, Software Engineering, <superpeter.cai@gmail.com>.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <clk.h>
|
|
#include <dm.h>
|
|
#include <errno.h>
|
|
#include <i2c.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/i2c.h>
|
|
#include <asm/arch/periph.h>
|
|
#include <dm/pinctrl.h>
|
|
#include <linux/sizes.h>
|
|
|
|
/* i2c timerout */
|
|
#define I2C_TIMEOUT_MS 100
|
|
#define I2C_RETRY_COUNT 3
|
|
|
|
/* rk i2c fifo max transfer bytes */
|
|
#define RK_I2C_FIFO_SIZE 32
|
|
|
|
struct rk_i2c {
|
|
struct clk clk;
|
|
struct i2c_regs *regs;
|
|
unsigned int speed;
|
|
};
|
|
|
|
enum {
|
|
RK_I2C_LEGACY,
|
|
RK_I2C_NEW,
|
|
};
|
|
|
|
/**
|
|
* @controller_type: i2c controller type
|
|
*/
|
|
struct rk_i2c_soc_data {
|
|
int controller_type;
|
|
};
|
|
|
|
static inline void rk_i2c_get_div(int div, int *divh, int *divl)
|
|
{
|
|
*divl = div / 2;
|
|
if (div % 2 == 0)
|
|
*divh = div / 2;
|
|
else
|
|
*divh = DIV_ROUND_UP(div, 2);
|
|
}
|
|
|
|
/*
|
|
* SCL Divisor = 8 * (CLKDIVL+1 + CLKDIVH+1)
|
|
* SCL = PCLK / SCLK Divisor
|
|
* i2c_rate = PCLK
|
|
*/
|
|
static void rk_i2c_set_clk(struct rk_i2c *i2c, uint32_t scl_rate)
|
|
{
|
|
uint32_t i2c_rate;
|
|
int div, divl, divh;
|
|
|
|
/* First get i2c rate from pclk */
|
|
i2c_rate = clk_get_rate(&i2c->clk);
|
|
|
|
div = DIV_ROUND_UP(i2c_rate, scl_rate * 8) - 2;
|
|
divh = 0;
|
|
divl = 0;
|
|
if (div >= 0)
|
|
rk_i2c_get_div(div, &divh, &divl);
|
|
writel(I2C_CLKDIV_VAL(divl, divh), &i2c->regs->clkdiv);
|
|
|
|
debug("rk_i2c_set_clk: i2c rate = %d, scl rate = %d\n", i2c_rate,
|
|
scl_rate);
|
|
debug("set i2c clk div = %d, divh = %d, divl = %d\n", div, divh, divl);
|
|
debug("set clk(I2C_CLKDIV: 0x%08x)\n", readl(&i2c->regs->clkdiv));
|
|
}
|
|
|
|
static void rk_i2c_show_regs(struct i2c_regs *regs)
|
|
{
|
|
#ifdef DEBUG
|
|
uint i;
|
|
|
|
debug("i2c_con: 0x%08x\n", readl(®s->con));
|
|
debug("i2c_clkdiv: 0x%08x\n", readl(®s->clkdiv));
|
|
debug("i2c_mrxaddr: 0x%08x\n", readl(®s->mrxaddr));
|
|
debug("i2c_mrxraddR: 0x%08x\n", readl(®s->mrxraddr));
|
|
debug("i2c_mtxcnt: 0x%08x\n", readl(®s->mtxcnt));
|
|
debug("i2c_mrxcnt: 0x%08x\n", readl(®s->mrxcnt));
|
|
debug("i2c_ien: 0x%08x\n", readl(®s->ien));
|
|
debug("i2c_ipd: 0x%08x\n", readl(®s->ipd));
|
|
debug("i2c_fcnt: 0x%08x\n", readl(®s->fcnt));
|
|
for (i = 0; i < 8; i++)
|
|
debug("i2c_txdata%d: 0x%08x\n", i, readl(®s->txdata[i]));
|
|
for (i = 0; i < 8; i++)
|
|
debug("i2c_rxdata%d: 0x%08x\n", i, readl(®s->rxdata[i]));
|
|
#endif
|
|
}
|
|
|
|
static int rk_i2c_send_start_bit(struct rk_i2c *i2c)
|
|
{
|
|
struct i2c_regs *regs = i2c->regs;
|
|
ulong start;
|
|
|
|
debug("I2c Send Start bit.\n");
|
|
writel(I2C_IPD_ALL_CLEAN, ®s->ipd);
|
|
|
|
writel(I2C_CON_EN | I2C_CON_START, ®s->con);
|
|
writel(I2C_STARTIEN, ®s->ien);
|
|
|
|
start = get_timer(0);
|
|
while (1) {
|
|
if (readl(®s->ipd) & I2C_STARTIPD) {
|
|
writel(I2C_STARTIPD, ®s->ipd);
|
|
break;
|
|
}
|
|
if (get_timer(start) > I2C_TIMEOUT_MS) {
|
|
debug("I2C Send Start Bit Timeout\n");
|
|
rk_i2c_show_regs(regs);
|
|
return -ETIMEDOUT;
|
|
}
|
|
udelay(1);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rk_i2c_send_stop_bit(struct rk_i2c *i2c)
|
|
{
|
|
struct i2c_regs *regs = i2c->regs;
|
|
ulong start;
|
|
|
|
debug("I2c Send Stop bit.\n");
|
|
writel(I2C_IPD_ALL_CLEAN, ®s->ipd);
|
|
|
|
writel(I2C_CON_EN | I2C_CON_STOP, ®s->con);
|
|
writel(I2C_CON_STOP, ®s->ien);
|
|
|
|
start = get_timer(0);
|
|
while (1) {
|
|
if (readl(®s->ipd) & I2C_STOPIPD) {
|
|
writel(I2C_STOPIPD, ®s->ipd);
|
|
break;
|
|
}
|
|
if (get_timer(start) > I2C_TIMEOUT_MS) {
|
|
debug("I2C Send Start Bit Timeout\n");
|
|
rk_i2c_show_regs(regs);
|
|
return -ETIMEDOUT;
|
|
}
|
|
udelay(1);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static inline void rk_i2c_disable(struct rk_i2c *i2c)
|
|
{
|
|
writel(0, &i2c->regs->con);
|
|
}
|
|
|
|
static int rk_i2c_read(struct rk_i2c *i2c, uchar chip, uint reg, uint r_len,
|
|
uchar *buf, uint b_len)
|
|
{
|
|
struct i2c_regs *regs = i2c->regs;
|
|
uchar *pbuf = buf;
|
|
uint bytes_remain_len = b_len;
|
|
uint bytes_xferred = 0;
|
|
uint words_xferred = 0;
|
|
ulong start;
|
|
uint con = 0;
|
|
uint rxdata;
|
|
uint i, j;
|
|
int err;
|
|
bool snd_chunk = false;
|
|
|
|
debug("rk_i2c_read: chip = %d, reg = %d, r_len = %d, b_len = %d\n",
|
|
chip, reg, r_len, b_len);
|
|
|
|
err = rk_i2c_send_start_bit(i2c);
|
|
if (err)
|
|
return err;
|
|
|
|
writel(I2C_MRXADDR_SET(1, chip << 1 | 1), ®s->mrxaddr);
|
|
if (r_len == 0) {
|
|
writel(0, ®s->mrxraddr);
|
|
} else if (r_len < 4) {
|
|
writel(I2C_MRXRADDR_SET(r_len, reg), ®s->mrxraddr);
|
|
} else {
|
|
debug("I2C Read: addr len %d not supported\n", r_len);
|
|
return -EIO;
|
|
}
|
|
|
|
while (bytes_remain_len) {
|
|
if (bytes_remain_len > RK_I2C_FIFO_SIZE) {
|
|
con = I2C_CON_EN;
|
|
bytes_xferred = 32;
|
|
} else {
|
|
/*
|
|
* The hw can read up to 32 bytes at a time. If we need
|
|
* more than one chunk, send an ACK after the last byte.
|
|
*/
|
|
con = I2C_CON_EN | I2C_CON_LASTACK;
|
|
bytes_xferred = bytes_remain_len;
|
|
}
|
|
words_xferred = DIV_ROUND_UP(bytes_xferred, 4);
|
|
|
|
/*
|
|
* make sure we are in plain RX mode if we read a second chunk
|
|
*/
|
|
if (snd_chunk)
|
|
con |= I2C_CON_MOD(I2C_MODE_RX);
|
|
else
|
|
con |= I2C_CON_MOD(I2C_MODE_TRX);
|
|
|
|
writel(con, ®s->con);
|
|
writel(bytes_xferred, ®s->mrxcnt);
|
|
writel(I2C_MBRFIEN | I2C_NAKRCVIEN, ®s->ien);
|
|
|
|
start = get_timer(0);
|
|
while (1) {
|
|
if (readl(®s->ipd) & I2C_NAKRCVIPD) {
|
|
writel(I2C_NAKRCVIPD, ®s->ipd);
|
|
err = -EREMOTEIO;
|
|
}
|
|
if (readl(®s->ipd) & I2C_MBRFIPD) {
|
|
writel(I2C_MBRFIPD, ®s->ipd);
|
|
break;
|
|
}
|
|
if (get_timer(start) > I2C_TIMEOUT_MS) {
|
|
debug("I2C Read Data Timeout\n");
|
|
err = -ETIMEDOUT;
|
|
rk_i2c_show_regs(regs);
|
|
goto i2c_exit;
|
|
}
|
|
udelay(1);
|
|
}
|
|
|
|
for (i = 0; i < words_xferred; i++) {
|
|
rxdata = readl(®s->rxdata[i]);
|
|
debug("I2c Read RXDATA[%d] = 0x%x\n", i, rxdata);
|
|
for (j = 0; j < 4; j++) {
|
|
if ((i * 4 + j) == bytes_xferred)
|
|
break;
|
|
*pbuf++ = (rxdata >> (j * 8)) & 0xff;
|
|
}
|
|
}
|
|
|
|
bytes_remain_len -= bytes_xferred;
|
|
snd_chunk = true;
|
|
debug("I2C Read bytes_remain_len %d\n", bytes_remain_len);
|
|
}
|
|
|
|
i2c_exit:
|
|
rk_i2c_send_stop_bit(i2c);
|
|
rk_i2c_disable(i2c);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int rk_i2c_write(struct rk_i2c *i2c, uchar chip, uint reg, uint r_len,
|
|
uchar *buf, uint b_len)
|
|
{
|
|
struct i2c_regs *regs = i2c->regs;
|
|
int err;
|
|
uchar *pbuf = buf;
|
|
uint bytes_remain_len = b_len + r_len + 1;
|
|
uint bytes_xferred = 0;
|
|
uint words_xferred = 0;
|
|
ulong start;
|
|
uint txdata;
|
|
uint i, j;
|
|
|
|
debug("rk_i2c_write: chip = %d, reg = %d, r_len = %d, b_len = %d\n",
|
|
chip, reg, r_len, b_len);
|
|
err = rk_i2c_send_start_bit(i2c);
|
|
if (err)
|
|
return err;
|
|
|
|
while (bytes_remain_len) {
|
|
if (bytes_remain_len > RK_I2C_FIFO_SIZE)
|
|
bytes_xferred = RK_I2C_FIFO_SIZE;
|
|
else
|
|
bytes_xferred = bytes_remain_len;
|
|
words_xferred = DIV_ROUND_UP(bytes_xferred, 4);
|
|
|
|
for (i = 0; i < words_xferred; i++) {
|
|
txdata = 0;
|
|
for (j = 0; j < 4; j++) {
|
|
if ((i * 4 + j) == bytes_xferred)
|
|
break;
|
|
|
|
if (i == 0 && j == 0 && pbuf == buf) {
|
|
txdata |= (chip << 1);
|
|
} else if (i == 0 && j <= r_len && pbuf == buf) {
|
|
txdata |= (reg &
|
|
(0xff << ((j - 1) * 8))) << 8;
|
|
} else {
|
|
txdata |= (*pbuf++)<<(j * 8);
|
|
}
|
|
}
|
|
writel(txdata, ®s->txdata[i]);
|
|
debug("I2c Write TXDATA[%d] = 0x%08x\n", i, txdata);
|
|
}
|
|
|
|
writel(I2C_CON_EN | I2C_CON_MOD(I2C_MODE_TX), ®s->con);
|
|
writel(bytes_xferred, ®s->mtxcnt);
|
|
writel(I2C_MBTFIEN | I2C_NAKRCVIEN, ®s->ien);
|
|
|
|
start = get_timer(0);
|
|
while (1) {
|
|
if (readl(®s->ipd) & I2C_NAKRCVIPD) {
|
|
writel(I2C_NAKRCVIPD, ®s->ipd);
|
|
err = -EREMOTEIO;
|
|
}
|
|
if (readl(®s->ipd) & I2C_MBTFIPD) {
|
|
writel(I2C_MBTFIPD, ®s->ipd);
|
|
break;
|
|
}
|
|
if (get_timer(start) > I2C_TIMEOUT_MS) {
|
|
debug("I2C Write Data Timeout\n");
|
|
err = -ETIMEDOUT;
|
|
rk_i2c_show_regs(regs);
|
|
goto i2c_exit;
|
|
}
|
|
udelay(1);
|
|
}
|
|
|
|
bytes_remain_len -= bytes_xferred;
|
|
debug("I2C Write bytes_remain_len %d\n", bytes_remain_len);
|
|
}
|
|
|
|
i2c_exit:
|
|
rk_i2c_send_stop_bit(i2c);
|
|
rk_i2c_disable(i2c);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int rockchip_i2c_xfer(struct udevice *bus, struct i2c_msg *msg,
|
|
int nmsgs)
|
|
{
|
|
struct rk_i2c *i2c = dev_get_priv(bus);
|
|
int ret;
|
|
|
|
debug("i2c_xfer: %d messages\n", nmsgs);
|
|
for (; nmsgs > 0; nmsgs--, msg++) {
|
|
debug("i2c_xfer: chip=0x%x, len=0x%x\n", msg->addr, msg->len);
|
|
if (msg->flags & I2C_M_RD) {
|
|
ret = rk_i2c_read(i2c, msg->addr, 0, 0, msg->buf,
|
|
msg->len);
|
|
} else {
|
|
ret = rk_i2c_write(i2c, msg->addr, 0, 0, msg->buf,
|
|
msg->len);
|
|
}
|
|
if (ret) {
|
|
debug("i2c_write: error sending\n");
|
|
return -EREMOTEIO;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int rockchip_i2c_set_bus_speed(struct udevice *bus, unsigned int speed)
|
|
{
|
|
struct rk_i2c *i2c = dev_get_priv(bus);
|
|
|
|
rk_i2c_set_clk(i2c, speed);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rockchip_i2c_ofdata_to_platdata(struct udevice *bus)
|
|
{
|
|
struct rk_i2c *priv = dev_get_priv(bus);
|
|
int ret;
|
|
|
|
ret = clk_get_by_index(bus, 0, &priv->clk);
|
|
if (ret < 0) {
|
|
debug("%s: Could not get clock for %s: %d\n", __func__,
|
|
bus->name, ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rockchip_i2c_probe(struct udevice *bus)
|
|
{
|
|
struct rk_i2c *priv = dev_get_priv(bus);
|
|
struct rk_i2c_soc_data *soc_data;
|
|
struct udevice *pinctrl;
|
|
int bus_nr;
|
|
int ret;
|
|
|
|
priv->regs = dev_read_addr_ptr(bus);
|
|
|
|
soc_data = (struct rk_i2c_soc_data*)dev_get_driver_data(bus);
|
|
|
|
if (soc_data->controller_type == RK_I2C_LEGACY) {
|
|
ret = dev_read_alias_seq(bus, &bus_nr);
|
|
if (ret < 0) {
|
|
debug("%s: Could not get alias for %s: %d\n",
|
|
__func__, bus->name, ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = uclass_get_device(UCLASS_PINCTRL, 0, &pinctrl);
|
|
if (ret) {
|
|
debug("%s: Cannot find pinctrl device\n", __func__);
|
|
return ret;
|
|
}
|
|
|
|
/* pinctrl will switch I2C to new type */
|
|
ret = pinctrl_request_noflags(pinctrl, PERIPH_ID_I2C0 + bus_nr);
|
|
if (ret) {
|
|
debug("%s: Failed to switch I2C to new type %s: %d\n",
|
|
__func__, bus->name, ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dm_i2c_ops rockchip_i2c_ops = {
|
|
.xfer = rockchip_i2c_xfer,
|
|
.set_bus_speed = rockchip_i2c_set_bus_speed,
|
|
};
|
|
|
|
static const struct rk_i2c_soc_data rk3066_soc_data = {
|
|
.controller_type = RK_I2C_LEGACY,
|
|
};
|
|
|
|
static const struct rk_i2c_soc_data rk3188_soc_data = {
|
|
.controller_type = RK_I2C_LEGACY,
|
|
};
|
|
|
|
static const struct rk_i2c_soc_data rk3228_soc_data = {
|
|
.controller_type = RK_I2C_NEW,
|
|
};
|
|
|
|
static const struct rk_i2c_soc_data rk3288_soc_data = {
|
|
.controller_type = RK_I2C_NEW,
|
|
};
|
|
|
|
static const struct rk_i2c_soc_data rk3328_soc_data = {
|
|
.controller_type = RK_I2C_NEW,
|
|
};
|
|
|
|
static const struct rk_i2c_soc_data rk3399_soc_data = {
|
|
.controller_type = RK_I2C_NEW,
|
|
};
|
|
|
|
static const struct udevice_id rockchip_i2c_ids[] = {
|
|
{
|
|
.compatible = "rockchip,rk3066-i2c",
|
|
.data = (ulong)&rk3066_soc_data,
|
|
},
|
|
{
|
|
.compatible = "rockchip,rk3188-i2c",
|
|
.data = (ulong)&rk3188_soc_data,
|
|
},
|
|
{
|
|
.compatible = "rockchip,rk3228-i2c",
|
|
.data = (ulong)&rk3228_soc_data,
|
|
},
|
|
{
|
|
.compatible = "rockchip,rk3288-i2c",
|
|
.data = (ulong)&rk3288_soc_data,
|
|
},
|
|
{
|
|
.compatible = "rockchip,rk3328-i2c",
|
|
.data = (ulong)&rk3328_soc_data,
|
|
},
|
|
{
|
|
.compatible = "rockchip,rk3399-i2c",
|
|
.data = (ulong)&rk3399_soc_data,
|
|
},
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(i2c_rockchip) = {
|
|
.name = "i2c_rockchip",
|
|
.id = UCLASS_I2C,
|
|
.of_match = rockchip_i2c_ids,
|
|
.ofdata_to_platdata = rockchip_i2c_ofdata_to_platdata,
|
|
.probe = rockchip_i2c_probe,
|
|
.priv_auto_alloc_size = sizeof(struct rk_i2c),
|
|
.ops = &rockchip_i2c_ops,
|
|
};
|
|
|