upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support

You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

Matt Porter a3c3fabb0f arm, omap3: fix warm reset serial output on OMAP36xx/AM/DM37xx ... In warm reset conditions on OMAP36xx/AM/DM37xx the rom code incorrectly sets the DPLL4 clock input divider to /6.5 which is an invalid value unless the input clock is 13MHz. When a JTAG emulator is attached, a warm reset is necessary after the emulator gains control of the process. This results in a loss of serial output due to the invalid DPLL4 settings. This patch fixes the issue by resetting the DPLL4 clock input divider to /1 when the input clock is not 13MHz. AM/DM37x TRM section 3.5.3.3.3.2.1 specifies that the /6.5 setting is only used when the input clock is 13MHz. Signed-off-by: Matt Porter <mporter@ti.com>		13 years ago
..
Makefile	OMAP3 SPL: Add identify_nand_chip function	13 years ago
board.c	omap3: Introduce weak misc_init_r	13 years ago
clock.c	arm, omap3: fix warm reset serial output on OMAP36xx/AM/DM37xx	13 years ago
config.mk	omap3: new SPL structure support	13 years ago
emac.c	AM35xx: add EMAC support	13 years ago
emif4.c	omap3: emif|sdrc: use a single global data define	14 years ago
lowlevel_init.S	armv7: add appropriate headers for assembly functions	13 years ago
mem.c	OMAP3: Change mem_ok to clear again after reading back	13 years ago
sdrc.c	sdrc.c: Fix typo in do_sdrc_init() for SPL	13 years ago
spl_id_nand.c	OMAP3 SPL: Add identify_nand_chip function	13 years ago
sys_info.c	omap3: make get_board_rev() function weak	13 years ago