upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
60 lines
1.2 KiB
60 lines
1.2 KiB
Common i2c bus multiplexer/switch properties.
|
|
|
|
An i2c bus multiplexer/switch will have several child busses that are
|
|
numbered uniquely in a device dependent manner. The nodes for an i2c bus
|
|
multiplexer/switch will have one child node for each child
|
|
bus.
|
|
|
|
Required properties:
|
|
- #address-cells = <1>;
|
|
- #size-cells = <0>;
|
|
|
|
Required properties for child nodes:
|
|
- #address-cells = <1>;
|
|
- #size-cells = <0>;
|
|
- reg : The sub-bus number.
|
|
|
|
Optional properties for child nodes:
|
|
- Other properties specific to the multiplexer/switch hardware.
|
|
- Child nodes conforming to i2c bus binding
|
|
|
|
|
|
Example :
|
|
|
|
/*
|
|
An NXP pca9548 8 channel I2C multiplexer at address 0x70
|
|
with two NXP pca8574 GPIO expanders attached, one each to
|
|
ports 3 and 4.
|
|
*/
|
|
|
|
mux@70 {
|
|
compatible = "nxp,pca9548";
|
|
reg = <0x70>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
i2c@3 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <3>;
|
|
|
|
gpio1: gpio@38 {
|
|
compatible = "nxp,pca8574";
|
|
reg = <0x38>;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
};
|
|
};
|
|
i2c@4 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <4>;
|
|
|
|
gpio2: gpio@38 {
|
|
compatible = "nxp,pca8574";
|
|
reg = <0x38>;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
};
|
|
};
|
|
};
|
|
|