upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
92 lines
2.1 KiB
92 lines
2.1 KiB
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2014 CompuLab, Ltd. <www.compulab.co.il>
|
|
*
|
|
* Authors: Igor Grinberg <grinberg@compulab.co.il>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <netdev.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <linux/errno.h>
|
|
#include <asm/arch/cpu.h>
|
|
#include <asm/arch/mem.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <asm/gpio.h>
|
|
|
|
#include "common.h"
|
|
|
|
static u32 cl_omap3_smc911x_gpmc_net_config[GPMC_MAX_REG] = {
|
|
NET_GPMC_CONFIG1,
|
|
NET_GPMC_CONFIG2,
|
|
NET_GPMC_CONFIG3,
|
|
NET_GPMC_CONFIG4,
|
|
NET_GPMC_CONFIG5,
|
|
NET_GPMC_CONFIG6,
|
|
0
|
|
};
|
|
|
|
static void cl_omap3_smc911x_setup_net_chip_gmpc(int cs, u32 base_addr)
|
|
{
|
|
struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE;
|
|
|
|
enable_gpmc_cs_config(cl_omap3_smc911x_gpmc_net_config,
|
|
&gpmc_cfg->cs[cs], base_addr, GPMC_SIZE_16M);
|
|
|
|
/* Enable off mode for NWE in PADCONF_GPMC_NWE register */
|
|
writew(readw(&ctrl_base->gpmc_nwe) | 0x0E00, &ctrl_base->gpmc_nwe);
|
|
|
|
/* Enable off mode for NOE in PADCONF_GPMC_NADV_ALE register */
|
|
writew(readw(&ctrl_base->gpmc_noe) | 0x0E00, &ctrl_base->gpmc_noe);
|
|
|
|
/* Enable off mode for ALE in PADCONF_GPMC_NADV_ALE register */
|
|
writew(readw(&ctrl_base->gpmc_nadv_ale) | 0x0E00,
|
|
&ctrl_base->gpmc_nadv_ale);
|
|
}
|
|
|
|
#ifdef CONFIG_OMAP_GPIO
|
|
static int cl_omap3_smc911x_reset_net_chip(int gpio)
|
|
{
|
|
int err;
|
|
|
|
if (!gpio_is_valid(gpio))
|
|
return -EINVAL;
|
|
|
|
err = gpio_request(gpio, "eth rst");
|
|
if (err)
|
|
return err;
|
|
|
|
/* Set gpio as output and send a pulse */
|
|
gpio_direction_output(gpio, 1);
|
|
udelay(1);
|
|
gpio_set_value(gpio, 0);
|
|
mdelay(40);
|
|
gpio_set_value(gpio, 1);
|
|
mdelay(1);
|
|
|
|
return 0;
|
|
}
|
|
#else /* !CONFIG_OMAP_GPIO */
|
|
static inline int cl_omap3_smc911x_reset_net_chip(int gpio) { return 0; }
|
|
#endif /* CONFIG_OMAP_GPIO */
|
|
|
|
int cl_omap3_smc911x_init(int id, int cs, u32 base_addr,
|
|
int (*reset)(int), int rst_gpio)
|
|
{
|
|
int ret;
|
|
|
|
cl_omap3_smc911x_setup_net_chip_gmpc(cs, base_addr);
|
|
|
|
if (reset)
|
|
reset(rst_gpio);
|
|
else
|
|
cl_omap3_smc911x_reset_net_chip(rst_gpio);
|
|
|
|
ret = smc911x_initialize(id, base_addr);
|
|
if (ret > 0)
|
|
return ret;
|
|
|
|
printf("Failed initializing SMC911x! ");
|
|
return 0;
|
|
}
|
|
|