upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/include/configs/MVBC_P.h

299 lines
7.9 KiB

/*
* (C) Copyright 2003-2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* (C) Copyright 2004-2008
* Matrix-Vision GmbH, andre.schwarz@matrix-vision.de
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_H
#define __CONFIG_H
#include <version.h>
#define CONFIG_MPC5200 1
#ifndef CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_TEXT_BASE 0xFF800000
#endif
#define CONFIG_SYS_MPC5XXX_CLKIN 33000000
#define CONFIG_MISC_INIT_R 1
#define CONFIG_SYS_CACHELINE_SIZE 32
#ifdef CONFIG_CMD_KGDB
#define CONFIG_SYS_CACHELINE_SHIFT 5
#endif
#define CONFIG_PSC_CONSOLE 1
#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200, 230400}
#define CONFIG_PCI 1
#define CONFIG_PCI_PNP 1
#undef CONFIG_PCI_SCAN_SHOW
#define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1
#define CONFIG_PCI_MEM_BUS 0x40000000
#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS
#define CONFIG_PCI_MEM_SIZE 0x10000000
#define CONFIG_PCI_IO_BUS 0x50000000
#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS
#define CONFIG_PCI_IO_SIZE 0x01000000
#define CONFIG_SYS_XLB_PIPELINING 1
#define CONFIG_HIGH_BATS 1
#define MV_CI mvBlueCOUGAR-P
#define MV_VCI mvBlueCOUGAR-P
#define MV_FPGA_DATA 0xff860000
#define MV_FPGA_SIZE 0
#define MV_KERNEL_ADDR 0xffd00000
#define MV_INITRD_ADDR 0xff900000
#define MV_INITRD_LENGTH 0x00400000
#define MV_SCRATCH_ADDR 0x00000000
#define MV_SCRATCH_LENGTH MV_INITRD_LENGTH
#define MV_SCRIPT_ADDR 0xff840000
#define MV_SCRIPT_ADDR2 0xff850000
#define MV_DTB_ADDR 0xfffc0000
#define CONFIG_SHOW_BOOT_PROGRESS 1
#define MV_KERNEL_ADDR_RAM 0x00100000
#define MV_DTB_ADDR_RAM 0x00600000
#define MV_INITRD_ADDR_RAM 0x01000000
/* pass open firmware flat tree */
#define CONFIG_OF_LIBFDT 1
#define CONFIG_OF_BOARD_SETUP 1
#define OF_CPU "PowerPC,5200@0"
#define OF_SOC "soc5200@f0000000"
#define OF_TBCLK (bd->bi_busfreq / 4)
#define MV_DTB_NAME mvbc-p.dtb
#define CONFIG_OF_STDOUT_VIA_ALIAS 1
/*
* Supported commands
*/
#include <config_cmd_default.h>
#define CONFIG_CMD_CACHE
#define CONFIG_CMD_NET
#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_SDRAM
#define CONFIG_CMD_PCI
#define CONFIG_CMD_FPGA
#define CONFIG_CMD_I2C
#undef CONFIG_WATCHDOG
#define CONFIG_BOOTP_VENDOREX
#define CONFIG_BOOTP_SUBNETMASK
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_DNS
#define CONFIG_BOOTP_DNS2
#define CONFIG_BOOTP_HOSTNAME
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_NTPSERVER
#define CONFIG_BOOTP_RANDOM_DELAY
#define CONFIG_BOOTP_SEND_HOSTNAME
#define CONFIG_LIB_RAND
/*
* Autoboot
*/
#define CONFIG_BOOTDELAY 2
#define CONFIG_AUTOBOOT_KEYED
#define CONFIG_AUTOBOOT_STOP_STR "s"
#define CONFIG_ZERO_BOOTDELAY_CHECK
#define CONFIG_RESET_TO_RETRY 1000
#define CONFIG_BOOTCOMMAND "if imi ${script_addr}; \
then source ${script_addr}; \
else source ${script_addr2}; \
fi;"
#define CONFIG_BOOTARGS "root=/dev/ram ro rootfstype=squashfs"
#define CONFIG_ENV_OVERWRITE
#define CONFIG_EXTRA_ENV_SETTINGS \
"console_nr=0\0" \
"console=yes\0" \
"stdin=serial\0" \
"stdout=serial\0" \
"stderr=serial\0" \
"fpga=0\0" \
"fpgadata=" __stringify(MV_FPGA_DATA) "\0" \
"fpgadatasize=" __stringify(MV_FPGA_SIZE) "\0" \
"script_addr=" __stringify(MV_SCRIPT_ADDR) "\0" \
"script_addr2=" __stringify(MV_SCRIPT_ADDR2) "\0" \
"mv_kernel_addr=" __stringify(MV_KERNEL_ADDR) "\0" \
"mv_kernel_addr_ram=" __stringify(MV_KERNEL_ADDR_RAM) "\0" \
"mv_initrd_addr=" __stringify(MV_INITRD_ADDR) "\0" \
"mv_initrd_addr_ram=" __stringify(MV_INITRD_ADDR_RAM) "\0" \
"mv_initrd_length=" __stringify(MV_INITRD_LENGTH) "\0" \
"mv_dtb_addr=" __stringify(MV_DTB_ADDR) "\0" \
"mv_dtb_addr_ram=" __stringify(MV_DTB_ADDR_RAM) "\0" \
"dtb_name=" __stringify(MV_DTB_NAME) "\0" \
"mv_scratch_addr=" __stringify(MV_SCRATCH_ADDR) "\0" \
"mv_scratch_length=" __stringify(MV_SCRATCH_LENGTH) "\0" \
"mv_version=" U_BOOT_VERSION "\0" \
"dhcp_client_id=" __stringify(MV_CI) "\0" \
"dhcp_vendor-class-identifier=" __stringify(MV_VCI) "\0" \
"netretry=no\0" \
"use_static_ipaddr=no\0" \
"static_ipaddr=192.168.90.10\0" \
"static_netmask=255.255.255.0\0" \
"static_gateway=0.0.0.0\0" \
"initrd_name=uInitrd.mvbc-p-rfs\0" \
"zcip=no\0" \
"netboot=yes\0" \
"mvtest=Ff\0" \
"tried_bootfromflash=no\0" \
"tried_bootfromnet=no\0" \
"use_dhcp=yes\0" \
"gev_start=yes\0" \
"mvbcdma_debug=0\0" \
"mvbcia_debug=0\0" \
"propdev_debug=0\0" \
"gevss_debug=0\0" \
"watchdog=1\0" \
"sensor_cnt=1\0" \
""
/*
* IPB Bus clocking configuration.
*/
#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK
#define CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2
/*
* Flash configuration
*/
#undef CONFIG_FLASH_16BIT
#define CONFIG_SYS_FLASH_CFI
#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_SYS_FLASH_CFI_AMD_RESET 1
#define CONFIG_SYS_FLASH_EMPTY_INFO
#define CONFIG_SYS_FLASH_ERASE_TOUT 50000
#define CONFIG_SYS_FLASH_WRITE_TOUT 1000
#define CONFIG_SYS_MAX_FLASH_BANKS 1
#define CONFIG_SYS_MAX_FLASH_SECT 256
#define CONFIG_SYS_LOWBOOT
#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_FLASH_SIZE 0x00800000
/*
* Environment settings
*/
#define CONFIG_ENV_IS_IN_FLASH
#undef CONFIG_SYS_FLASH_PROTECTION
#define CONFIG_ENV_ADDR 0xFFFE0000
#define CONFIG_ENV_SIZE 0x10000
#define CONFIG_ENV_SECT_SIZE 0x10000
#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR+CONFIG_ENV_SIZE)
#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
/*
* Memory map
*/
#define CONFIG_SYS_MBAR 0xF0000000
#define CONFIG_SYS_SDRAM_BASE 0x00000000
#define CONFIG_SYS_DEFAULT_MBAR 0x80000000
#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM
#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
#define CONFIG_SYS_RAMBOOT 1
#endif
/* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */
#define CONFIG_SYS_MONITOR_LEN (512 << 10)
#define CONFIG_SYS_MALLOC_LEN (512 << 10)
#define CONFIG_SYS_BOOTMAPSZ (8 << 20)
/*
* I2C configuration
*/
#define CONFIG_HARD_I2C 1
#define CONFIG_SYS_I2C_MODULE 1
#define CONFIG_SYS_I2C_SPEED 86000
#define CONFIG_SYS_I2C_SLAVE 0x7F
/*
* Ethernet configuration
*/
#define CONFIG_NET_RETRY_COUNT 5
#define CONFIG_E1000
#define CONFIG_E1000_FALLBACK_MAC { 0xb6, 0xb4, 0x45, 0xeb, 0xfb, 0xc0 }
#undef CONFIG_MPC5xxx_FEC
#undef CONFIG_PHY_ADDR
#define CONFIG_NETDEV eth0
/*
* Miscellaneous configurable options
*/
#define CONFIG_SYS_HUSH_PARSER
#define CONFIG_CMDLINE_EDITING
#undef CONFIG_SYS_LONGHELP
#ifdef CONFIG_CMD_KGDB
#define CONFIG_SYS_CBSIZE 1024
#else
#define CONFIG_SYS_CBSIZE 256
#endif
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
#define CONFIG_SYS_MAXARGS 16
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
#define CONFIG_SYS_MEMTEST_START 0x00800000
#define CONFIG_SYS_MEMTEST_END 0x02f00000
/* default load address */
#define CONFIG_SYS_LOAD_ADDR 0x02000000
/* default location for tftp and bootm */
#define CONFIG_LOADADDR 0x00200000
/*
* Various low-level settings
*/
#define CONFIG_SYS_GPS_PORT_CONFIG 0x20000004
#define CONFIG_SYS_HID0_INIT (HID0_ICE | HID0_ICFI)
#define CONFIG_SYS_HID0_FINAL HID0_ICE
#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE
#define CONFIG_SYS_BOOTCS_CFG 0x00047800
#define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE
#define CONFIG_SYS_CS_BURST 0x000000f0
#define CONFIG_SYS_CS_DEADCYCLE 0x33333303
#define CONFIG_SYS_RESET_ADDRESS 0x00000100
#undef FPGA_DEBUG
#undef CONFIG_SYS_FPGA_PROG_FEEDBACK
#define CONFIG_FPGA
#define CONFIG_FPGA_ALTERA 1
#define CONFIG_FPGA_CYCLON2 1
#define CONFIG_FPGA_COUNT 1
#endif