upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
206 lines
6.2 KiB
206 lines
6.2 KiB
/*
|
|
* (C) Copyright 2000-2002
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <mpc8xx.h>
|
|
#include <asm/processor.h>
|
|
|
|
#define PITC_SHIFT 16
|
|
#define PITR_SHIFT 16
|
|
/* pitc values to time for 58/8192 seconds (about 70.8 milliseconds) */
|
|
#define SPEED_PIT_COUNTS 58
|
|
#define SPEED_PITC ((SPEED_PIT_COUNTS - 1) << PITC_SHIFT)
|
|
#define SPEED_PITC_INIT ((SPEED_PIT_COUNTS + 1) << PITC_SHIFT)
|
|
|
|
/* Access functions for the Machine State Register */
|
|
static __inline__ unsigned long get_msr(void)
|
|
{
|
|
unsigned long msr;
|
|
|
|
asm volatile("mfmsr %0" : "=r" (msr) :);
|
|
return msr;
|
|
}
|
|
|
|
static __inline__ void set_msr(unsigned long msr)
|
|
{
|
|
asm volatile("mtmsr %0" : : "r" (msr));
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
/*
|
|
* Measure CPU clock speed (core clock GCLK1, GCLK2),
|
|
* also determine bus clock speed (checking bus divider factor)
|
|
*
|
|
* (Approx. GCLK frequency in Hz)
|
|
*
|
|
* Initializes timer 2 and PIT, but disables them before return.
|
|
* [Use timer 2, because MPC823 CPUs mask 0.x do not have timers 3 and 4]
|
|
*
|
|
* When measuring the CPU clock against the PIT, we count cpu clocks
|
|
* for 58/8192 seconds with a prescale divide by 177 for the cpu clock.
|
|
* These strange values for the timing interval and prescaling are used
|
|
* because the formula for the CPU clock is:
|
|
*
|
|
* CPU clock = count * (177 * (8192 / 58))
|
|
*
|
|
* = count * 24999.7241
|
|
*
|
|
* which is very close to
|
|
*
|
|
* = count * 25000
|
|
*
|
|
* Since the count gives the CPU clock divided by 25000, we can get
|
|
* the CPU clock rounded to the nearest 0.1 MHz by
|
|
*
|
|
* CPU clock = ((count + 2) / 4) * 100000;
|
|
*
|
|
* The rounding is important since the measurement is sometimes going
|
|
* to be high or low by 0.025 MHz, depending on exactly how the clocks
|
|
* and counters interact. By rounding we get the exact answer for any
|
|
* CPU clock that is an even multiple of 0.1 MHz.
|
|
*/
|
|
|
|
unsigned long measure_gclk(void)
|
|
{
|
|
volatile immap_t *immr = (immap_t *) CFG_IMMR;
|
|
volatile cpmtimer8xx_t *timerp = &immr->im_cpmtimer;
|
|
ulong timer2_val;
|
|
ulong msr_val;
|
|
|
|
#ifdef CONFIG_MPC866_et_al
|
|
/* dont use OSCM, only use EXTCLK/512 */
|
|
immr->im_clkrst.car_sccr |= SCCR_RTSEL | SCCR_RTDIV;
|
|
#else
|
|
immr->im_clkrst.car_sccr &= ~(SCCR_RTSEL | SCCR_RTDIV);
|
|
#endif
|
|
|
|
/* Reset + Stop Timer 2, no cascading
|
|
*/
|
|
timerp->cpmt_tgcr &= ~(TGCR_CAS2 | TGCR_RST2);
|
|
|
|
/* Keep stopped, halt in debug mode
|
|
*/
|
|
timerp->cpmt_tgcr |= (TGCR_FRZ2 | TGCR_STP2);
|
|
|
|
/* Timer 2 setup:
|
|
* Output ref. interrupt disable, int. clock
|
|
* Prescale by 177. Note that prescaler divides by value + 1
|
|
* so we must subtract 1 here.
|
|
*/
|
|
timerp->cpmt_tmr2 = ((177 - 1) << TMR_PS_SHIFT) | TMR_ICLK_IN_GEN;
|
|
|
|
timerp->cpmt_tcn2 = 0; /* reset state */
|
|
timerp->cpmt_tgcr |= TGCR_RST2; /* enable timer 2 */
|
|
|
|
/*
|
|
* PIT setup:
|
|
*
|
|
* We want to time for SPEED_PITC_COUNTS counts (of 8192 Hz),
|
|
* so the count value would be SPEED_PITC_COUNTS - 1.
|
|
* But there would be an uncertainty in the start time of 1/4
|
|
* count since when we enable the PIT the count is not
|
|
* synchronized to the 32768 Hz oscillator. The trick here is
|
|
* to start the count higher and wait until the PIT count
|
|
* changes to the required value before starting timer 2.
|
|
*
|
|
* One count high should be enough, but occasionally the start
|
|
* is off by 1 or 2 counts of 32768 Hz. With the start value
|
|
* set two counts high it seems very reliable.
|
|
*/
|
|
|
|
immr->im_sitk.sitk_pitck = KAPWR_KEY; /* PIT initialization */
|
|
immr->im_sit.sit_pitc = SPEED_PITC_INIT;
|
|
|
|
immr->im_sitk.sitk_piscrk = KAPWR_KEY;
|
|
immr->im_sit.sit_piscr = CFG_PISCR;
|
|
|
|
/*
|
|
* Start measurement - disable interrupts, just in case
|
|
*/
|
|
msr_val = get_msr ();
|
|
set_msr (msr_val & ~MSR_EE);
|
|
|
|
immr->im_sit.sit_piscr |= PISCR_PTE;
|
|
|
|
/* spin until get exact count when we want to start */
|
|
while (immr->im_sit.sit_pitr > SPEED_PITC);
|
|
|
|
timerp->cpmt_tgcr &= ~TGCR_STP2; /* Start Timer 2 */
|
|
while ((immr->im_sit.sit_piscr & PISCR_PS) == 0);
|
|
timerp->cpmt_tgcr |= TGCR_STP2; /* Stop Timer 2 */
|
|
|
|
/* re-enable external interrupts if they were on */
|
|
set_msr (msr_val);
|
|
|
|
/* Disable timer and PIT
|
|
*/
|
|
timer2_val = timerp->cpmt_tcn2; /* save before reset timer */
|
|
|
|
timerp->cpmt_tgcr &= ~(TGCR_RST2 | TGCR_FRZ2 | TGCR_STP2);
|
|
immr->im_sit.sit_piscr &= ~PISCR_PTE;
|
|
|
|
#ifdef CONFIG_MPC866_et_al
|
|
/* not using OSCM, using XIN, so scale appropriately */
|
|
return (((timer2_val + 2) / 4) * (CFG_8XX_XIN/512))/8192 * 100000L;
|
|
#else
|
|
return ((timer2_val + 2) / 4) * 100000L; /* convert to Hz */
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* get_clocks() fills in gd->cpu_clock depending on CONFIG_8xx_GCLK_FREQ
|
|
* or (if it is not defined) measure_gclk() (which uses the ref clock)
|
|
* from above.
|
|
*/
|
|
int get_clocks (void)
|
|
{
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
volatile immap_t *immr = (immap_t *) CFG_IMMR;
|
|
#ifndef CONFIG_8xx_GCLK_FREQ
|
|
gd->cpu_clk = measure_gclk();
|
|
#else /* CONFIG_8xx_GCLK_FREQ */
|
|
/*
|
|
* If for some reason measuring the gclk frequency won't
|
|
* work, we return the hardwired value.
|
|
* (For example, the cogent CMA286-60 CPU module has no
|
|
* separate oscillator for PITRTCLK)
|
|
*/
|
|
|
|
gd->cpu_clk = CONFIG_8xx_GCLK_FREQ;
|
|
|
|
#endif /* CONFIG_8xx_GCLK_FREQ */
|
|
|
|
if ((immr->im_clkrst.car_sccr & SCCR_EBDF11) == 0) {
|
|
/* No Bus Divider active */
|
|
gd->bus_clk = gd->cpu_clk;
|
|
} else {
|
|
/* The MPC8xx has only one BDF: half clock speed */
|
|
gd->bus_clk = gd->cpu_clk / 2;
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|