upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/drivers/usb/eth/lan7x.h

229 lines
5.1 KiB

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (c) 2017 Microchip Technology Inc. All rights reserved.
*/
#include <console.h>
#include <watchdog.h>
/* USB Vendor Requests */
#define USB_VENDOR_REQUEST_WRITE_REGISTER 0xA0
#define USB_VENDOR_REQUEST_READ_REGISTER 0xA1
#define USB_VENDOR_REQUEST_GET_STATS 0xA2
/* Tx Command A */
#define TX_CMD_A_FCS BIT(22)
#define TX_CMD_A_LEN_MASK 0x000FFFFF
/* Rx Command A */
#define RX_CMD_A_RXE BIT(18)
#define RX_CMD_A_LEN_MASK 0x00003FFF
/* SCSRs */
#define ID_REV 0x00
#define ID_REV_CHIP_ID_MASK 0xFFFF0000
#define ID_REV_CHIP_ID_7500 0x7500
#define ID_REV_CHIP_ID_7800 0x7800
#define ID_REV_CHIP_ID_7850 0x7850
#define INT_STS 0x0C
#define HW_CFG 0x010
#define HW_CFG_LRST BIT(1)
#define PMT_CTL 0x014
#define PMT_CTL_PHY_PWRUP BIT(10)
#define PMT_CTL_READY BIT(7)
#define PMT_CTL_PHY_RST BIT(4)
#define E2P_CMD 0x040
#define E2P_CMD_EPC_BUSY BIT(31)
#define E2P_CMD_EPC_CMD_READ 0x00000000
#define E2P_CMD_EPC_TIMEOUT BIT(10)
#define E2P_CMD_EPC_ADDR_MASK 0x000001FF
#define E2P_DATA 0x044
#define RFE_CTL_BCAST_EN BIT(10)
#define RFE_CTL_DA_PERFECT BIT(1)
#define FCT_RX_CTL_EN BIT(31)
#define FCT_TX_CTL_EN BIT(31)
#define MAC_CR 0x100
#define MAC_CR_ADP BIT(13)
#define MAC_CR_AUTO_DUPLEX BIT(12)
#define MAC_CR_AUTO_SPEED BIT(11)
#define MAC_RX 0x104
#define MAC_RX_FCS_STRIP BIT(4)
#define MAC_RX_RXEN BIT(0)
#define MAC_TX 0x108
#define MAC_TX_TXEN BIT(0)
#define FLOW 0x10C
#define FLOW_CR_TX_FCEN BIT(30)
#define FLOW_CR_RX_FCEN BIT(29)
#define RX_ADDRH 0x118
#define RX_ADDRL 0x11C
#define MII_ACC 0x120
#define MII_ACC_MII_READ 0x00000000
#define MII_ACC_MII_WRITE 0x00000002
#define MII_ACC_MII_BUSY BIT(0)
#define MII_DATA 0x124
#define SS_USB_PKT_SIZE 1024
#define HS_USB_PKT_SIZE 512
#define FS_USB_PKT_SIZE 64
#define MAX_RX_FIFO_SIZE (12 * 1024)
#define MAX_TX_FIFO_SIZE (12 * 1024)
#define DEFAULT_BULK_IN_DELAY 0x0800
#define EEPROM_INDICATOR 0xA5
#define EEPROM_MAC_OFFSET 0x01
/* Some extra defines */
#define LAN7X_INTERNAL_PHY_ID 1
#define LAN7X_MAC_RX_MAX_SIZE(mtu) \
((mtu) << 16) /* Max frame size */
#define LAN7X_MAC_RX_MAX_SIZE_DEFAULT \
LAN7X_MAC_RX_MAX_SIZE(ETH_FRAME_LEN + 4 /* VLAN */ + 4 /* CRC */)
/* Timeouts */
#define USB_CTRL_SET_TIMEOUT_MS 5000
#define USB_CTRL_GET_TIMEOUT_MS 5000
#define USB_BULK_SEND_TIMEOUT_MS 5000
#define USB_BULK_RECV_TIMEOUT_MS 5000
#define TIMEOUT_RESOLUTION_MS 50
#define PHY_CONNECT_TIMEOUT_MS 5000
#define RX_URB_SIZE 2048
/* driver private */
struct lan7x_private {
struct ueth_data ueth;
u32 chipid; /* Chip or device ID */
struct mii_dev *mdiobus;
struct phy_device *phydev;
};
/*
* Lan7x infrastructure commands
*/
int lan7x_write_reg(struct usb_device *udev, u32 index, u32 data);
int lan7x_read_reg(struct usb_device *udev, u32 index, u32 *data);
static inline int lan7x_wait_for_bit(struct usb_device *udev,
const char *prefix, const u32 reg,
const u32 mask, const bool set,
const unsigned int timeout_ms,
const bool breakable)
{
u32 val;
unsigned long start = get_timer(0);
while (1) {
lan7x_read_reg(udev, reg, &val);
if (!set)
val = ~val;
if ((val & mask) == mask)
return 0;
if (get_timer(start) > timeout_ms)
break;
if (breakable && ctrlc()) {
puts("Abort\n");
return -EINTR;
}
udelay(1);
WATCHDOG_RESET();
}
debug("%s: Timeout (reg=0x%x mask=%08x wait_set=%i)\n", prefix, reg,
mask, set);
return -ETIMEDOUT;
}
int lan7x_mdio_read(struct usb_device *udev, int phy_id, int idx);
void lan7x_mdio_write(struct usb_device *udev, int phy_id, int idx,
int regval);
static inline int lan7x_mdio_wait_for_bit(struct usb_device *udev,
const char *prefix,
int phy_id, const u32 reg,
const u32 mask, const bool set,
const unsigned int timeout_ms,
const bool breakable)
{
u32 val;
unsigned long start = get_timer(0);
while (1) {
val = lan7x_mdio_read(udev, phy_id, reg);
if (!set)
val = ~val;
if ((val & mask) == mask)
return 0;
if (get_timer(start) > timeout_ms)
break;
if (breakable && ctrlc()) {
puts("Abort\n");
return -EINTR;
}
udelay(1);
WATCHDOG_RESET();
}
debug("%s: Timeout (reg=0x%x mask=%08x wait_set=%i)\n", prefix, reg,
mask, set);
return -ETIMEDOUT;
}
int lan7x_phylib_register(struct udevice *udev);
int lan7x_eth_phylib_connect(struct udevice *udev, struct ueth_data *dev);
int lan7x_eth_phylib_config_start(struct udevice *udev);
int lan7x_pmt_phy_reset(struct usb_device *udev,
struct ueth_data *dev);
int lan7x_update_flowcontrol(struct usb_device *udev,
struct ueth_data *dev,
uint32_t *flow, uint32_t *fct_flow);
int lan7x_read_eeprom_mac(unsigned char *enetaddr, struct usb_device *udev);
int lan7x_basic_reset(struct usb_device *udev,
struct ueth_data *dev);
void lan7x_eth_stop(struct udevice *dev);
int lan7x_eth_send(struct udevice *dev, void *packet, int length);
int lan7x_eth_recv(struct udevice *dev, int flags, uchar **packetp);
int lan7x_free_pkt(struct udevice *dev, uchar *packet, int packet_len);
int lan7x_eth_remove(struct udevice *dev);