upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
507 lines
12 KiB
507 lines
12 KiB
/*
|
|
* Copyright (C) 2005 Sandburst Corporation
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
/*
|
|
* Ported from cpu/ppc4xx/i2c.c by AS HARNOIS by
|
|
* Travis B. Sawyer
|
|
* Sandburst Corporation.
|
|
*/
|
|
#include <common.h>
|
|
#include <ppc4xx.h>
|
|
#include <4xx_i2c.h>
|
|
#include <i2c.h>
|
|
#include <command.h>
|
|
#include "ppc440gx_i2c.h"
|
|
|
|
#ifdef CONFIG_I2C_BUS1
|
|
|
|
#define IIC_OK 0
|
|
#define IIC_NOK 1
|
|
#define IIC_NOK_LA 2 /* Lost arbitration */
|
|
#define IIC_NOK_ICT 3 /* Incomplete transfer */
|
|
#define IIC_NOK_XFRA 4 /* Transfer aborted */
|
|
#define IIC_NOK_DATA 5 /* No data in buffer */
|
|
#define IIC_NOK_TOUT 6 /* Transfer timeout */
|
|
|
|
#define IIC_TIMEOUT 1 /* 1 second */
|
|
#if defined(CONFIG_SYS_I2C_NOPROBES)
|
|
static uchar i2c_no_probes[] = CONFIG_SYS_I2C_NOPROBES;
|
|
#endif
|
|
|
|
static void _i2c_bus1_reset (void)
|
|
{
|
|
int i, status;
|
|
|
|
/* Reset status register */
|
|
/* write 1 in SCMP and IRQA to clear these fields */
|
|
out8 (IIC_STS1, 0x0A);
|
|
|
|
/* write 1 in IRQP IRQD LA ICT XFRA to clear these fields */
|
|
out8 (IIC_EXTSTS1, 0x8F);
|
|
__asm__ volatile ("eieio");
|
|
|
|
/*
|
|
* Get current state, reset bus
|
|
* only if no transfers are pending.
|
|
*/
|
|
i = 10;
|
|
do {
|
|
/* Get status */
|
|
status = in8 (IIC_STS1);
|
|
udelay (500); /* 500us */
|
|
i--;
|
|
} while ((status & IIC_STS_PT) && (i > 0));
|
|
/* Soft reset controller */
|
|
status = in8 (IIC_XTCNTLSS1);
|
|
out8 (IIC_XTCNTLSS1, (status | IIC_XTCNTLSS_SRST));
|
|
__asm__ volatile ("eieio");
|
|
|
|
/* make sure where in initial state, data hi, clock hi */
|
|
out8 (IIC_DIRECTCNTL1, 0xC);
|
|
for (i = 0; i < 10; i++) {
|
|
if ((in8 (IIC_DIRECTCNTL1) & 0x3) != 0x3) {
|
|
/* clock until we get to known state */
|
|
out8 (IIC_DIRECTCNTL1, 0x8); /* clock lo */
|
|
udelay (100); /* 100us */
|
|
out8 (IIC_DIRECTCNTL1, 0xC); /* clock hi */
|
|
udelay (100); /* 100us */
|
|
} else {
|
|
break;
|
|
}
|
|
}
|
|
/* send start condition */
|
|
out8 (IIC_DIRECTCNTL1, 0x4);
|
|
udelay (1000); /* 1ms */
|
|
/* send stop condition */
|
|
out8 (IIC_DIRECTCNTL1, 0xC);
|
|
udelay (1000); /* 1ms */
|
|
/* Unreset controller */
|
|
out8 (IIC_XTCNTLSS1, (status & ~IIC_XTCNTLSS_SRST));
|
|
udelay (1000); /* 1ms */
|
|
}
|
|
|
|
void i2c1_init (int speed, int slaveadd)
|
|
{
|
|
sys_info_t sysInfo;
|
|
unsigned long freqOPB;
|
|
int val, divisor;
|
|
|
|
#ifdef CONFIG_SYS_I2C_INIT_BOARD
|
|
/* call board specific i2c bus reset routine before accessing the */
|
|
/* environment, which might be in a chip on that bus. For details */
|
|
/* about this problem see doc/I2C_Edge_Conditions. */
|
|
i2c_init_board();
|
|
#endif
|
|
|
|
/* Handle possible failed I2C state */
|
|
/* FIXME: put this into i2c_init_board()? */
|
|
_i2c_bus1_reset ();
|
|
|
|
/* clear lo master address */
|
|
out8 (IIC_LMADR1, 0);
|
|
|
|
/* clear hi master address */
|
|
out8 (IIC_HMADR1, 0);
|
|
|
|
/* clear lo slave address */
|
|
out8 (IIC_LSADR1, 0);
|
|
|
|
/* clear hi slave address */
|
|
out8 (IIC_HSADR1, 0);
|
|
|
|
/* Clock divide Register */
|
|
/* get OPB frequency */
|
|
get_sys_info (&sysInfo);
|
|
freqOPB = sysInfo.freqPLB / sysInfo.pllOpbDiv;
|
|
/* set divisor according to freqOPB */
|
|
divisor = (freqOPB - 1) / 10000000;
|
|
if (divisor == 0)
|
|
divisor = 1;
|
|
out8 (IIC_CLKDIV1, divisor);
|
|
|
|
/* no interrupts */
|
|
out8 (IIC_INTRMSK1, 0);
|
|
|
|
/* clear transfer count */
|
|
out8 (IIC_XFRCNT1, 0);
|
|
|
|
/* clear extended control & stat */
|
|
/* write 1 in SRC SRS SWC SWS to clear these fields */
|
|
out8 (IIC_XTCNTLSS1, 0xF0);
|
|
|
|
/* Mode Control Register
|
|
Flush Slave/Master data buffer */
|
|
out8 (IIC_MDCNTL1, IIC_MDCNTL_FSDB | IIC_MDCNTL_FMDB);
|
|
__asm__ volatile ("eieio");
|
|
|
|
|
|
val = in8(IIC_MDCNTL1);
|
|
__asm__ volatile ("eieio");
|
|
|
|
/* Ignore General Call, slave transfers are ignored,
|
|
disable interrupts, exit unknown bus state, enable hold
|
|
SCL
|
|
100kHz normaly or FastMode for 400kHz and above
|
|
*/
|
|
|
|
val |= IIC_MDCNTL_EUBS|IIC_MDCNTL_HSCL;
|
|
if( speed >= 400000 ){
|
|
val |= IIC_MDCNTL_FSM;
|
|
}
|
|
out8 (IIC_MDCNTL1, val);
|
|
|
|
/* clear control reg */
|
|
out8 (IIC_CNTL1, 0x00);
|
|
__asm__ volatile ("eieio");
|
|
|
|
}
|
|
|
|
/*
|
|
This code tries to use the features of the 405GP i2c
|
|
controller. It will transfer up to 4 bytes in one pass
|
|
on the loop. It only does out8(lbz) to the buffer when it
|
|
is possible to do out16(lhz) transfers.
|
|
|
|
cmd_type is 0 for write 1 for read.
|
|
|
|
addr_len can take any value from 0-255, it is only limited
|
|
by the char, we could make it larger if needed. If it is
|
|
0 we skip the address write cycle.
|
|
|
|
Typical case is a Write of an addr followd by a Read. The
|
|
IBM FAQ does not cover this. On the last byte of the write
|
|
we don't set the creg CHT bit, and on the first bytes of the
|
|
read we set the RPST bit.
|
|
|
|
It does not support address only transfers, there must be
|
|
a data part. If you want to write the address yourself, put
|
|
it in the data pointer.
|
|
|
|
It does not support transfer to/from address 0.
|
|
|
|
It does not check XFRCNT.
|
|
*/
|
|
static
|
|
int i2c_transfer1(unsigned char cmd_type,
|
|
unsigned char chip,
|
|
unsigned char addr[],
|
|
unsigned char addr_len,
|
|
unsigned char data[],
|
|
unsigned short data_len )
|
|
{
|
|
unsigned char* ptr;
|
|
int reading;
|
|
int tran,cnt;
|
|
int result;
|
|
int status;
|
|
int i;
|
|
uchar creg;
|
|
|
|
if( data == 0 || data_len == 0 ){
|
|
/*Don't support data transfer of no length or to address 0*/
|
|
printf( "i2c_transfer: bad call\n" );
|
|
return IIC_NOK;
|
|
}
|
|
if( addr && addr_len ){
|
|
ptr = addr;
|
|
cnt = addr_len;
|
|
reading = 0;
|
|
}else{
|
|
ptr = data;
|
|
cnt = data_len;
|
|
reading = cmd_type;
|
|
}
|
|
|
|
/*Clear Stop Complete Bit*/
|
|
out8(IIC_STS1,IIC_STS_SCMP);
|
|
/* Check init */
|
|
i=10;
|
|
do {
|
|
/* Get status */
|
|
status = in8(IIC_STS1);
|
|
__asm__ volatile("eieio");
|
|
i--;
|
|
} while ((status & IIC_STS_PT) && (i>0));
|
|
|
|
if (status & IIC_STS_PT) {
|
|
result = IIC_NOK_TOUT;
|
|
return(result);
|
|
}
|
|
/*flush the Master/Slave Databuffers*/
|
|
out8(IIC_MDCNTL1, ((in8(IIC_MDCNTL1))|IIC_MDCNTL_FMDB|IIC_MDCNTL_FSDB));
|
|
/*need to wait 4 OPB clocks? code below should take that long*/
|
|
|
|
/* 7-bit adressing */
|
|
out8(IIC_HMADR1,0);
|
|
out8(IIC_LMADR1, chip);
|
|
__asm__ volatile("eieio");
|
|
|
|
tran = 0;
|
|
result = IIC_OK;
|
|
creg = 0;
|
|
|
|
while ( tran != cnt && (result == IIC_OK)) {
|
|
int bc,j;
|
|
|
|
/* Control register =
|
|
Normal transfer, 7-bits adressing, Transfer up to bc bytes, Normal start,
|
|
Transfer is a sequence of transfers
|
|
*/
|
|
creg |= IIC_CNTL_PT;
|
|
|
|
bc = (cnt - tran) > 4 ? 4 :
|
|
cnt - tran;
|
|
creg |= (bc-1)<<4;
|
|
/* if the real cmd type is write continue trans*/
|
|
if ( (!cmd_type && (ptr == addr)) || ((tran+bc) != cnt) )
|
|
creg |= IIC_CNTL_CHT;
|
|
|
|
if (reading)
|
|
creg |= IIC_CNTL_READ;
|
|
else {
|
|
for(j=0; j<bc; j++) {
|
|
/* Set buffer */
|
|
out8(IIC_MDBUF1,ptr[tran+j]);
|
|
__asm__ volatile("eieio");
|
|
}
|
|
}
|
|
out8(IIC_CNTL1, creg );
|
|
__asm__ volatile("eieio");
|
|
|
|
/* Transfer is in progress
|
|
we have to wait for upto 5 bytes of data
|
|
1 byte chip address+r/w bit then bc bytes
|
|
of data.
|
|
udelay(10) is 1 bit time at 100khz
|
|
Doubled for slop. 20 is too small.
|
|
*/
|
|
i=2*5*8;
|
|
do {
|
|
/* Get status */
|
|
status = in8(IIC_STS1);
|
|
__asm__ volatile("eieio");
|
|
udelay (10);
|
|
i--;
|
|
} while ((status & IIC_STS_PT) && !(status & IIC_STS_ERR)
|
|
&& (i>0));
|
|
|
|
if (status & IIC_STS_ERR) {
|
|
result = IIC_NOK;
|
|
status = in8 (IIC_EXTSTS1);
|
|
/* Lost arbitration? */
|
|
if (status & IIC_EXTSTS_LA)
|
|
result = IIC_NOK_LA;
|
|
/* Incomplete transfer? */
|
|
if (status & IIC_EXTSTS_ICT)
|
|
result = IIC_NOK_ICT;
|
|
/* Transfer aborted? */
|
|
if (status & IIC_EXTSTS_XFRA)
|
|
result = IIC_NOK_XFRA;
|
|
} else if ( status & IIC_STS_PT) {
|
|
result = IIC_NOK_TOUT;
|
|
}
|
|
/* Command is reading => get buffer */
|
|
if ((reading) && (result == IIC_OK)) {
|
|
/* Are there data in buffer */
|
|
if (status & IIC_STS_MDBS) {
|
|
/*
|
|
even if we have data we have to wait 4OPB clocks
|
|
for it to hit the front of the FIFO, after that
|
|
we can just read. We should check XFCNT here and
|
|
if the FIFO is full there is no need to wait.
|
|
*/
|
|
udelay (1);
|
|
for(j=0;j<bc;j++) {
|
|
ptr[tran+j] = in8(IIC_MDBUF1);
|
|
__asm__ volatile("eieio");
|
|
}
|
|
} else
|
|
result = IIC_NOK_DATA;
|
|
}
|
|
creg = 0;
|
|
tran+=bc;
|
|
if( ptr == addr && tran == cnt ) {
|
|
ptr = data;
|
|
cnt = data_len;
|
|
tran = 0;
|
|
reading = cmd_type;
|
|
if( reading )
|
|
creg = IIC_CNTL_RPST;
|
|
}
|
|
}
|
|
return (result);
|
|
}
|
|
|
|
int i2c_probe1 (uchar chip)
|
|
{
|
|
uchar buf[1];
|
|
|
|
buf[0] = 0;
|
|
|
|
/*
|
|
* What is needed is to send the chip address and verify that the
|
|
* address was <ACK>ed (i.e. there was a chip at that address which
|
|
* drove the data line low).
|
|
*/
|
|
return(i2c_transfer1 (1, chip << 1, 0,0, buf, 1) != 0);
|
|
}
|
|
|
|
|
|
int i2c_read1 (uchar chip, uint addr, int alen, uchar * buffer, int len)
|
|
{
|
|
uchar xaddr[4];
|
|
int ret;
|
|
|
|
if ( alen > 4 ) {
|
|
printf ("I2C read: addr len %d not supported\n", alen);
|
|
return 1;
|
|
}
|
|
|
|
if ( alen > 0 ) {
|
|
xaddr[0] = (addr >> 24) & 0xFF;
|
|
xaddr[1] = (addr >> 16) & 0xFF;
|
|
xaddr[2] = (addr >> 8) & 0xFF;
|
|
xaddr[3] = addr & 0xFF;
|
|
}
|
|
|
|
|
|
#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
|
|
/*
|
|
* EEPROM chips that implement "address overflow" are ones
|
|
* like Catalyst 24WC04/08/16 which has 9/10/11 bits of
|
|
* address and the extra bits end up in the "chip address"
|
|
* bit slots. This makes a 24WC08 (1Kbyte) chip look like
|
|
* four 256 byte chips.
|
|
*
|
|
* Note that we consider the length of the address field to
|
|
* still be one byte because the extra address bits are
|
|
* hidden in the chip address.
|
|
*/
|
|
if( alen > 0 )
|
|
chip |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
|
|
#endif
|
|
if( (ret = i2c_transfer1( 1, chip<<1, &xaddr[4-alen], alen, buffer, len )) != 0) {
|
|
printf( "I2c read: failed %d\n", ret);
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
int i2c_write1 (uchar chip, uint addr, int alen, uchar * buffer, int len)
|
|
{
|
|
uchar xaddr[4];
|
|
|
|
if ( alen > 4 ) {
|
|
printf ("I2C write: addr len %d not supported\n", alen);
|
|
return 1;
|
|
|
|
}
|
|
if ( alen > 0 ) {
|
|
xaddr[0] = (addr >> 24) & 0xFF;
|
|
xaddr[1] = (addr >> 16) & 0xFF;
|
|
xaddr[2] = (addr >> 8) & 0xFF;
|
|
xaddr[3] = addr & 0xFF;
|
|
}
|
|
|
|
#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
|
|
/*
|
|
* EEPROM chips that implement "address overflow" are ones
|
|
* like Catalyst 24WC04/08/16 which has 9/10/11 bits of
|
|
* address and the extra bits end up in the "chip address"
|
|
* bit slots. This makes a 24WC08 (1Kbyte) chip look like
|
|
* four 256 byte chips.
|
|
*
|
|
* Note that we consider the length of the address field to
|
|
* still be one byte because the extra address bits are
|
|
* hidden in the chip address.
|
|
*/
|
|
if( alen > 0 )
|
|
chip |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
|
|
#endif
|
|
|
|
return (i2c_transfer1( 0, chip<<1, &xaddr[4-alen], alen, buffer, len ) != 0);
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Read a register
|
|
*/
|
|
uchar i2c_reg_read1(uchar i2c_addr, uchar reg)
|
|
{
|
|
uchar buf;
|
|
|
|
i2c_read1(i2c_addr, reg, 1, &buf, (uchar)1);
|
|
|
|
return(buf);
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Write a register
|
|
*/
|
|
void i2c_reg_write1(uchar i2c_addr, uchar reg, uchar val)
|
|
{
|
|
i2c_write1(i2c_addr, reg, 1, &val, 1);
|
|
}
|
|
|
|
|
|
int do_i2c1_probe(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
|
|
{
|
|
int j;
|
|
#if defined(CONFIG_SYS_I2C_NOPROBES)
|
|
int k, skip;
|
|
#endif
|
|
|
|
puts ("Valid chip addresses:");
|
|
for(j = 0; j < 128; j++) {
|
|
#if defined(CONFIG_SYS_I2C_NOPROBES)
|
|
skip = 0;
|
|
for (k = 0; k < sizeof(i2c_no_probes); k++){
|
|
if (j == i2c_no_probes[k]){
|
|
skip = 1;
|
|
break;
|
|
}
|
|
}
|
|
if (skip)
|
|
continue;
|
|
#endif
|
|
if(i2c_probe1(j) == 0) {
|
|
printf(" %02X", j);
|
|
}
|
|
}
|
|
putc ('\n');
|
|
|
|
#if defined(CONFIG_SYS_I2C_NOPROBES)
|
|
puts ("Excluded chip addresses:");
|
|
for( k = 0; k < sizeof(i2c_no_probes); k++ )
|
|
printf(" %02X", i2c_no_probes[k] );
|
|
putc ('\n');
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
U_BOOT_CMD(
|
|
iprobe1, 1, 1, do_i2c1_probe,
|
|
"probe to discover valid I2C chip addresses",
|
|
"\n -discover valid I2C chip addresses\n"
|
|
);
|
|
|
|
#endif /* CONFIG_I2C_BUS1 */
|
|
|