upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
89 lines
3.1 KiB
89 lines
3.1 KiB
/*
|
|
* (C) Copyright 2001
|
|
* Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
|
|
*
|
|
* modified for marvell db64360 eval board by
|
|
* Ingo Assmus <ingo.assmus@keymile.com>
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
/* serial.h - mostly useful for DUART serial_init in serial.c */
|
|
|
|
#ifndef __SERIAL_H__
|
|
#define __SERIAL_H__
|
|
|
|
#if 0
|
|
|
|
#define B230400 1
|
|
#define B115200 2
|
|
#define B57600 4
|
|
#define B38400 82
|
|
#define B19200 163
|
|
#define B9600 24
|
|
#define B4800 651
|
|
#define B2400 1302
|
|
#define B1200 2604
|
|
#define B600 5208
|
|
#define B300 10417
|
|
#define B150 20833
|
|
#define B110 28409
|
|
#define BDEFAULT B115200
|
|
|
|
/* this stuff is important to initialize
|
|
the DUART channels */
|
|
|
|
#define Scale 0x01L /* distance between port addresses */
|
|
#define COM1 0x000003f8 /* Keyboard */
|
|
#define COM2 0x000002f8 /* Host */
|
|
|
|
|
|
/* Port Definitions relative to base COM port addresses */
|
|
#define DataIn (0x00*Scale) /* data input port */
|
|
#define DataOut (0x00*Scale) /* data output port */
|
|
#define BaudLsb (0x00*Scale) /* baud rate divisor least significant byte */
|
|
#define BaudMsb (0x01*Scale) /* baud rate divisor most significant byte */
|
|
#define Ier (0x01*Scale) /* interrupt enable register */
|
|
#define Iir (0x02*Scale) /* interrupt identification register */
|
|
#define Lcr (0x03*Scale) /* line control register */
|
|
#define Mcr (0x04*Scale) /* modem control register */
|
|
#define Lsr (0x05*Scale) /* line status register */
|
|
#define Msr (0x06*Scale) /* modem status register */
|
|
|
|
/* Bit Definitions for above ports */
|
|
#define LcrDlab 0x80 /* b7: enable baud rate divisor registers */
|
|
#define LcrDflt 0x03 /* b6-0: no parity, 1 stop, 8 data */
|
|
|
|
#define McrRts 0x02 /* b1: request to send (I am ready to xmit) */
|
|
#define McrDtr 0x01 /* b0: data terminal ready (I am alive ready to rcv) */
|
|
#define McrDflt (McrRts|McrDtr)
|
|
|
|
#define LsrTxD 0x6000 /* b5: transmit holding register empty (i.e. xmit OK!)*/
|
|
/* b6: transmitter empty */
|
|
#define LsrRxD 0x0100 /* b0: received data ready (i.e. got a byte!) */
|
|
|
|
#define MsrRi 0x0040 /* b6: ring indicator (other guy is ready to rcv) */
|
|
#define MsrDsr 0x0020 /* b5: data set ready (other guy is alive ready to rcv */
|
|
#define MsrCts 0x0010 /* b4: clear to send (other guy is ready to rcv) */
|
|
|
|
#define IerRda 0xf /* b0: Enable received data available interrupt */
|
|
|
|
#endif
|
|
|
|
#endif /* __SERIAL_H__ */
|
|
|