upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
949 lines
25 KiB
949 lines
25 KiB
/* Integrated Flash Controller NAND Machine Driver
|
|
*
|
|
* Copyright (c) 2012 Freescale Semiconductor, Inc
|
|
*
|
|
* Authors: Dipen Dudhat <Dipen.Dudhat@freescale.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <malloc.h>
|
|
#include <nand.h>
|
|
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/nand.h>
|
|
#include <linux/mtd/nand_ecc.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/errno.h>
|
|
#include <asm/fsl_ifc.h>
|
|
|
|
#define FSL_IFC_V1_1_0 0x01010000
|
|
#define MAX_BANKS 4
|
|
#define ERR_BYTE 0xFF /* Value returned for read bytes
|
|
when read failed */
|
|
#define IFC_TIMEOUT_MSECS 10 /* Maximum number of mSecs to wait for IFC
|
|
NAND Machine */
|
|
|
|
struct fsl_ifc_ctrl;
|
|
|
|
/* mtd information per set */
|
|
struct fsl_ifc_mtd {
|
|
struct nand_chip chip;
|
|
struct fsl_ifc_ctrl *ctrl;
|
|
|
|
struct device *dev;
|
|
int bank; /* Chip select bank number */
|
|
unsigned int bufnum_mask; /* bufnum = page & bufnum_mask */
|
|
u8 __iomem *vbase; /* Chip select base virtual address */
|
|
};
|
|
|
|
/* overview of the fsl ifc controller */
|
|
struct fsl_ifc_ctrl {
|
|
struct nand_hw_control controller;
|
|
struct fsl_ifc_mtd *chips[MAX_BANKS];
|
|
|
|
/* device info */
|
|
struct fsl_ifc *regs;
|
|
uint8_t __iomem *addr; /* Address of assigned IFC buffer */
|
|
unsigned int cs_nand; /* On which chipsel NAND is connected */
|
|
unsigned int page; /* Last page written to / read from */
|
|
unsigned int read_bytes; /* Number of bytes read during command */
|
|
unsigned int column; /* Saved column from SEQIN */
|
|
unsigned int index; /* Pointer to next byte to 'read' */
|
|
unsigned int status; /* status read from NEESR after last op */
|
|
unsigned int oob; /* Non zero if operating on OOB data */
|
|
unsigned int eccread; /* Non zero for a full-page ECC read */
|
|
};
|
|
|
|
static struct fsl_ifc_ctrl *ifc_ctrl;
|
|
|
|
/* 512-byte page with 4-bit ECC, 8-bit */
|
|
static struct nand_ecclayout oob_512_8bit_ecc4 = {
|
|
.eccbytes = 8,
|
|
.eccpos = {8, 9, 10, 11, 12, 13, 14, 15},
|
|
.oobfree = { {0, 5}, {6, 2} },
|
|
};
|
|
|
|
/* 512-byte page with 4-bit ECC, 16-bit */
|
|
static struct nand_ecclayout oob_512_16bit_ecc4 = {
|
|
.eccbytes = 8,
|
|
.eccpos = {8, 9, 10, 11, 12, 13, 14, 15},
|
|
.oobfree = { {2, 6}, },
|
|
};
|
|
|
|
/* 2048-byte page size with 4-bit ECC */
|
|
static struct nand_ecclayout oob_2048_ecc4 = {
|
|
.eccbytes = 32,
|
|
.eccpos = {
|
|
8, 9, 10, 11, 12, 13, 14, 15,
|
|
16, 17, 18, 19, 20, 21, 22, 23,
|
|
24, 25, 26, 27, 28, 29, 30, 31,
|
|
32, 33, 34, 35, 36, 37, 38, 39,
|
|
},
|
|
.oobfree = { {2, 6}, {40, 24} },
|
|
};
|
|
|
|
/* 4096-byte page size with 4-bit ECC */
|
|
static struct nand_ecclayout oob_4096_ecc4 = {
|
|
.eccbytes = 64,
|
|
.eccpos = {
|
|
8, 9, 10, 11, 12, 13, 14, 15,
|
|
16, 17, 18, 19, 20, 21, 22, 23,
|
|
24, 25, 26, 27, 28, 29, 30, 31,
|
|
32, 33, 34, 35, 36, 37, 38, 39,
|
|
40, 41, 42, 43, 44, 45, 46, 47,
|
|
48, 49, 50, 51, 52, 53, 54, 55,
|
|
56, 57, 58, 59, 60, 61, 62, 63,
|
|
64, 65, 66, 67, 68, 69, 70, 71,
|
|
},
|
|
.oobfree = { {2, 6}, {72, 56} },
|
|
};
|
|
|
|
/* 4096-byte page size with 8-bit ECC -- requires 218-byte OOB */
|
|
static struct nand_ecclayout oob_4096_ecc8 = {
|
|
.eccbytes = 128,
|
|
.eccpos = {
|
|
8, 9, 10, 11, 12, 13, 14, 15,
|
|
16, 17, 18, 19, 20, 21, 22, 23,
|
|
24, 25, 26, 27, 28, 29, 30, 31,
|
|
32, 33, 34, 35, 36, 37, 38, 39,
|
|
40, 41, 42, 43, 44, 45, 46, 47,
|
|
48, 49, 50, 51, 52, 53, 54, 55,
|
|
56, 57, 58, 59, 60, 61, 62, 63,
|
|
64, 65, 66, 67, 68, 69, 70, 71,
|
|
72, 73, 74, 75, 76, 77, 78, 79,
|
|
80, 81, 82, 83, 84, 85, 86, 87,
|
|
88, 89, 90, 91, 92, 93, 94, 95,
|
|
96, 97, 98, 99, 100, 101, 102, 103,
|
|
104, 105, 106, 107, 108, 109, 110, 111,
|
|
112, 113, 114, 115, 116, 117, 118, 119,
|
|
120, 121, 122, 123, 124, 125, 126, 127,
|
|
128, 129, 130, 131, 132, 133, 134, 135,
|
|
},
|
|
.oobfree = { {2, 6}, {136, 82} },
|
|
};
|
|
|
|
|
|
/*
|
|
* Generic flash bbt descriptors
|
|
*/
|
|
static u8 bbt_pattern[] = {'B', 'b', 't', '0' };
|
|
static u8 mirror_pattern[] = {'1', 't', 'b', 'B' };
|
|
|
|
static struct nand_bbt_descr bbt_main_descr = {
|
|
.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE |
|
|
NAND_BBT_2BIT | NAND_BBT_VERSION,
|
|
.offs = 2, /* 0 on 8-bit small page */
|
|
.len = 4,
|
|
.veroffs = 6,
|
|
.maxblocks = 4,
|
|
.pattern = bbt_pattern,
|
|
};
|
|
|
|
static struct nand_bbt_descr bbt_mirror_descr = {
|
|
.options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE |
|
|
NAND_BBT_2BIT | NAND_BBT_VERSION,
|
|
.offs = 2, /* 0 on 8-bit small page */
|
|
.len = 4,
|
|
.veroffs = 6,
|
|
.maxblocks = 4,
|
|
.pattern = mirror_pattern,
|
|
};
|
|
|
|
/*
|
|
* Set up the IFC hardware block and page address fields, and the ifc nand
|
|
* structure addr field to point to the correct IFC buffer in memory
|
|
*/
|
|
static void set_addr(struct mtd_info *mtd, int column, int page_addr, int oob)
|
|
{
|
|
struct nand_chip *chip = mtd->priv;
|
|
struct fsl_ifc_mtd *priv = chip->priv;
|
|
struct fsl_ifc_ctrl *ctrl = priv->ctrl;
|
|
struct fsl_ifc *ifc = ctrl->regs;
|
|
int buf_num;
|
|
|
|
ctrl->page = page_addr;
|
|
|
|
/* Program ROW0/COL0 */
|
|
out_be32(&ifc->ifc_nand.row0, page_addr);
|
|
out_be32(&ifc->ifc_nand.col0, (oob ? IFC_NAND_COL_MS : 0) | column);
|
|
|
|
buf_num = page_addr & priv->bufnum_mask;
|
|
|
|
ctrl->addr = priv->vbase + buf_num * (mtd->writesize * 2);
|
|
ctrl->index = column;
|
|
|
|
/* for OOB data point to the second half of the buffer */
|
|
if (oob)
|
|
ctrl->index += mtd->writesize;
|
|
}
|
|
|
|
static int is_blank(struct mtd_info *mtd, struct fsl_ifc_ctrl *ctrl,
|
|
unsigned int bufnum)
|
|
{
|
|
struct nand_chip *chip = mtd->priv;
|
|
struct fsl_ifc_mtd *priv = chip->priv;
|
|
u8 __iomem *addr = priv->vbase + bufnum * (mtd->writesize * 2);
|
|
u32 __iomem *main = (u32 *)addr;
|
|
u8 __iomem *oob = addr + mtd->writesize;
|
|
int i;
|
|
|
|
for (i = 0; i < mtd->writesize / 4; i++) {
|
|
if (__raw_readl(&main[i]) != 0xffffffff)
|
|
return 0;
|
|
}
|
|
|
|
for (i = 0; i < chip->ecc.layout->eccbytes; i++) {
|
|
int pos = chip->ecc.layout->eccpos[i];
|
|
|
|
if (__raw_readb(&oob[pos]) != 0xff)
|
|
return 0;
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
|
|
/* returns nonzero if entire page is blank */
|
|
static int check_read_ecc(struct mtd_info *mtd, struct fsl_ifc_ctrl *ctrl,
|
|
u32 *eccstat, unsigned int bufnum)
|
|
{
|
|
u32 reg = eccstat[bufnum / 4];
|
|
int errors;
|
|
|
|
errors = (reg >> ((3 - bufnum % 4) * 8)) & 15;
|
|
|
|
return errors;
|
|
}
|
|
|
|
/*
|
|
* execute IFC NAND command and wait for it to complete
|
|
*/
|
|
static int fsl_ifc_run_command(struct mtd_info *mtd)
|
|
{
|
|
struct nand_chip *chip = mtd->priv;
|
|
struct fsl_ifc_mtd *priv = chip->priv;
|
|
struct fsl_ifc_ctrl *ctrl = priv->ctrl;
|
|
struct fsl_ifc *ifc = ctrl->regs;
|
|
long long end_tick;
|
|
u32 eccstat[4];
|
|
int i;
|
|
|
|
/* set the chip select for NAND Transaction */
|
|
out_be32(&ifc->ifc_nand.nand_csel, ifc_ctrl->cs_nand);
|
|
|
|
/* start read/write seq */
|
|
out_be32(&ifc->ifc_nand.nandseq_strt,
|
|
IFC_NAND_SEQ_STRT_FIR_STRT);
|
|
|
|
/* wait for NAND Machine complete flag or timeout */
|
|
end_tick = usec2ticks(IFC_TIMEOUT_MSECS * 1000) + get_ticks();
|
|
|
|
while (end_tick > get_ticks()) {
|
|
ctrl->status = in_be32(&ifc->ifc_nand.nand_evter_stat);
|
|
|
|
if (ctrl->status & IFC_NAND_EVTER_STAT_OPC)
|
|
break;
|
|
}
|
|
|
|
out_be32(&ifc->ifc_nand.nand_evter_stat, ctrl->status);
|
|
|
|
if (ctrl->status & IFC_NAND_EVTER_STAT_FTOER)
|
|
printf("%s: Flash Time Out Error\n", __func__);
|
|
if (ctrl->status & IFC_NAND_EVTER_STAT_WPER)
|
|
printf("%s: Write Protect Error\n", __func__);
|
|
|
|
if (ctrl->eccread) {
|
|
int errors;
|
|
int bufnum = ctrl->page & priv->bufnum_mask;
|
|
int sector = bufnum * chip->ecc.steps;
|
|
int sector_end = sector + chip->ecc.steps - 1;
|
|
|
|
for (i = sector / 4; i <= sector_end / 4; i++)
|
|
eccstat[i] = in_be32(&ifc->ifc_nand.nand_eccstat[i]);
|
|
|
|
for (i = sector; i <= sector_end; i++) {
|
|
errors = check_read_ecc(mtd, ctrl, eccstat, i);
|
|
|
|
if (errors == 15) {
|
|
/*
|
|
* Uncorrectable error.
|
|
* OK only if the whole page is blank.
|
|
*
|
|
* We disable ECCER reporting due to erratum
|
|
* IFC-A002770 -- so report it now if we
|
|
* see an uncorrectable error in ECCSTAT.
|
|
*/
|
|
if (!is_blank(mtd, ctrl, bufnum))
|
|
ctrl->status |=
|
|
IFC_NAND_EVTER_STAT_ECCER;
|
|
break;
|
|
}
|
|
|
|
mtd->ecc_stats.corrected += errors;
|
|
}
|
|
|
|
ctrl->eccread = 0;
|
|
}
|
|
|
|
/* returns 0 on success otherwise non-zero) */
|
|
return ctrl->status == IFC_NAND_EVTER_STAT_OPC ? 0 : -EIO;
|
|
}
|
|
|
|
static void fsl_ifc_do_read(struct nand_chip *chip,
|
|
int oob,
|
|
struct mtd_info *mtd)
|
|
{
|
|
struct fsl_ifc_mtd *priv = chip->priv;
|
|
struct fsl_ifc_ctrl *ctrl = priv->ctrl;
|
|
struct fsl_ifc *ifc = ctrl->regs;
|
|
|
|
/* Program FIR/IFC_NAND_FCR0 for Small/Large page */
|
|
if (mtd->writesize > 512) {
|
|
out_be32(&ifc->ifc_nand.nand_fir0,
|
|
(IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
|
|
(IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) |
|
|
(IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) |
|
|
(IFC_FIR_OP_CMD1 << IFC_NAND_FIR0_OP3_SHIFT) |
|
|
(IFC_FIR_OP_RBCD << IFC_NAND_FIR0_OP4_SHIFT));
|
|
out_be32(&ifc->ifc_nand.nand_fir1, 0x0);
|
|
|
|
out_be32(&ifc->ifc_nand.nand_fcr0,
|
|
(NAND_CMD_READ0 << IFC_NAND_FCR0_CMD0_SHIFT) |
|
|
(NAND_CMD_READSTART << IFC_NAND_FCR0_CMD1_SHIFT));
|
|
} else {
|
|
out_be32(&ifc->ifc_nand.nand_fir0,
|
|
(IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
|
|
(IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) |
|
|
(IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) |
|
|
(IFC_FIR_OP_RBCD << IFC_NAND_FIR0_OP3_SHIFT));
|
|
|
|
if (oob)
|
|
out_be32(&ifc->ifc_nand.nand_fcr0,
|
|
NAND_CMD_READOOB << IFC_NAND_FCR0_CMD0_SHIFT);
|
|
else
|
|
out_be32(&ifc->ifc_nand.nand_fcr0,
|
|
NAND_CMD_READ0 << IFC_NAND_FCR0_CMD0_SHIFT);
|
|
}
|
|
}
|
|
|
|
/* cmdfunc send commands to the IFC NAND Machine */
|
|
static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command,
|
|
int column, int page_addr)
|
|
{
|
|
struct nand_chip *chip = mtd->priv;
|
|
struct fsl_ifc_mtd *priv = chip->priv;
|
|
struct fsl_ifc_ctrl *ctrl = priv->ctrl;
|
|
struct fsl_ifc *ifc = ctrl->regs;
|
|
|
|
/* clear the read buffer */
|
|
ctrl->read_bytes = 0;
|
|
if (command != NAND_CMD_PAGEPROG)
|
|
ctrl->index = 0;
|
|
|
|
switch (command) {
|
|
/* READ0 read the entire buffer to use hardware ECC. */
|
|
case NAND_CMD_READ0: {
|
|
out_be32(&ifc->ifc_nand.nand_fbcr, 0);
|
|
set_addr(mtd, 0, page_addr, 0);
|
|
|
|
ctrl->read_bytes = mtd->writesize + mtd->oobsize;
|
|
ctrl->index += column;
|
|
|
|
if (chip->ecc.mode == NAND_ECC_HW)
|
|
ctrl->eccread = 1;
|
|
|
|
fsl_ifc_do_read(chip, 0, mtd);
|
|
fsl_ifc_run_command(mtd);
|
|
return;
|
|
}
|
|
|
|
/* READOOB reads only the OOB because no ECC is performed. */
|
|
case NAND_CMD_READOOB:
|
|
out_be32(&ifc->ifc_nand.nand_fbcr, mtd->oobsize - column);
|
|
set_addr(mtd, column, page_addr, 1);
|
|
|
|
ctrl->read_bytes = mtd->writesize + mtd->oobsize;
|
|
|
|
fsl_ifc_do_read(chip, 1, mtd);
|
|
fsl_ifc_run_command(mtd);
|
|
|
|
return;
|
|
|
|
/* READID must read all possible bytes while CEB is active */
|
|
case NAND_CMD_READID:
|
|
case NAND_CMD_PARAM: {
|
|
int timing = IFC_FIR_OP_RB;
|
|
if (command == NAND_CMD_PARAM)
|
|
timing = IFC_FIR_OP_RBCD;
|
|
|
|
out_be32(&ifc->ifc_nand.nand_fir0,
|
|
(IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
|
|
(IFC_FIR_OP_UA << IFC_NAND_FIR0_OP1_SHIFT) |
|
|
(timing << IFC_NAND_FIR0_OP2_SHIFT));
|
|
out_be32(&ifc->ifc_nand.nand_fcr0,
|
|
command << IFC_NAND_FCR0_CMD0_SHIFT);
|
|
out_be32(&ifc->ifc_nand.row3, column);
|
|
|
|
/*
|
|
* although currently it's 8 bytes for READID, we always read
|
|
* the maximum 256 bytes(for PARAM)
|
|
*/
|
|
out_be32(&ifc->ifc_nand.nand_fbcr, 256);
|
|
ctrl->read_bytes = 256;
|
|
|
|
set_addr(mtd, 0, 0, 0);
|
|
fsl_ifc_run_command(mtd);
|
|
return;
|
|
}
|
|
|
|
/* ERASE1 stores the block and page address */
|
|
case NAND_CMD_ERASE1:
|
|
set_addr(mtd, 0, page_addr, 0);
|
|
return;
|
|
|
|
/* ERASE2 uses the block and page address from ERASE1 */
|
|
case NAND_CMD_ERASE2:
|
|
out_be32(&ifc->ifc_nand.nand_fir0,
|
|
(IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
|
|
(IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP1_SHIFT) |
|
|
(IFC_FIR_OP_CMD1 << IFC_NAND_FIR0_OP2_SHIFT));
|
|
|
|
out_be32(&ifc->ifc_nand.nand_fcr0,
|
|
(NAND_CMD_ERASE1 << IFC_NAND_FCR0_CMD0_SHIFT) |
|
|
(NAND_CMD_ERASE2 << IFC_NAND_FCR0_CMD1_SHIFT));
|
|
|
|
out_be32(&ifc->ifc_nand.nand_fbcr, 0);
|
|
ctrl->read_bytes = 0;
|
|
fsl_ifc_run_command(mtd);
|
|
return;
|
|
|
|
/* SEQIN sets up the addr buffer and all registers except the length */
|
|
case NAND_CMD_SEQIN: {
|
|
u32 nand_fcr0;
|
|
ctrl->column = column;
|
|
ctrl->oob = 0;
|
|
|
|
if (mtd->writesize > 512) {
|
|
nand_fcr0 =
|
|
(NAND_CMD_SEQIN << IFC_NAND_FCR0_CMD0_SHIFT) |
|
|
(NAND_CMD_PAGEPROG << IFC_NAND_FCR0_CMD1_SHIFT);
|
|
|
|
out_be32(&ifc->ifc_nand.nand_fir0,
|
|
(IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
|
|
(IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) |
|
|
(IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) |
|
|
(IFC_FIR_OP_WBCD << IFC_NAND_FIR0_OP3_SHIFT) |
|
|
(IFC_FIR_OP_CW1 << IFC_NAND_FIR0_OP4_SHIFT));
|
|
out_be32(&ifc->ifc_nand.nand_fir1, 0);
|
|
} else {
|
|
nand_fcr0 = ((NAND_CMD_PAGEPROG <<
|
|
IFC_NAND_FCR0_CMD1_SHIFT) |
|
|
(NAND_CMD_SEQIN <<
|
|
IFC_NAND_FCR0_CMD2_SHIFT));
|
|
|
|
out_be32(&ifc->ifc_nand.nand_fir0,
|
|
(IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
|
|
(IFC_FIR_OP_CMD2 << IFC_NAND_FIR0_OP1_SHIFT) |
|
|
(IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP2_SHIFT) |
|
|
(IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP3_SHIFT) |
|
|
(IFC_FIR_OP_WBCD << IFC_NAND_FIR0_OP4_SHIFT));
|
|
out_be32(&ifc->ifc_nand.nand_fir1,
|
|
(IFC_FIR_OP_CW1 << IFC_NAND_FIR1_OP5_SHIFT));
|
|
|
|
if (column >= mtd->writesize)
|
|
nand_fcr0 |=
|
|
NAND_CMD_READOOB << IFC_NAND_FCR0_CMD0_SHIFT;
|
|
else
|
|
nand_fcr0 |=
|
|
NAND_CMD_READ0 << IFC_NAND_FCR0_CMD0_SHIFT;
|
|
}
|
|
|
|
if (column >= mtd->writesize) {
|
|
/* OOB area --> READOOB */
|
|
column -= mtd->writesize;
|
|
ctrl->oob = 1;
|
|
}
|
|
out_be32(&ifc->ifc_nand.nand_fcr0, nand_fcr0);
|
|
set_addr(mtd, column, page_addr, ctrl->oob);
|
|
return;
|
|
}
|
|
|
|
/* PAGEPROG reuses all of the setup from SEQIN and adds the length */
|
|
case NAND_CMD_PAGEPROG:
|
|
if (ctrl->oob)
|
|
out_be32(&ifc->ifc_nand.nand_fbcr,
|
|
ctrl->index - ctrl->column);
|
|
else
|
|
out_be32(&ifc->ifc_nand.nand_fbcr, 0);
|
|
|
|
fsl_ifc_run_command(mtd);
|
|
return;
|
|
|
|
case NAND_CMD_STATUS:
|
|
out_be32(&ifc->ifc_nand.nand_fir0,
|
|
(IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
|
|
(IFC_FIR_OP_RB << IFC_NAND_FIR0_OP1_SHIFT));
|
|
out_be32(&ifc->ifc_nand.nand_fcr0,
|
|
NAND_CMD_STATUS << IFC_NAND_FCR0_CMD0_SHIFT);
|
|
out_be32(&ifc->ifc_nand.nand_fbcr, 1);
|
|
set_addr(mtd, 0, 0, 0);
|
|
ctrl->read_bytes = 1;
|
|
|
|
fsl_ifc_run_command(mtd);
|
|
|
|
/* Chip sometimes reporting write protect even when it's not */
|
|
out_8(ctrl->addr, in_8(ctrl->addr) | NAND_STATUS_WP);
|
|
return;
|
|
|
|
case NAND_CMD_RESET:
|
|
out_be32(&ifc->ifc_nand.nand_fir0,
|
|
IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT);
|
|
out_be32(&ifc->ifc_nand.nand_fcr0,
|
|
NAND_CMD_RESET << IFC_NAND_FCR0_CMD0_SHIFT);
|
|
fsl_ifc_run_command(mtd);
|
|
return;
|
|
|
|
default:
|
|
printf("%s: error, unsupported command 0x%x.\n",
|
|
__func__, command);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Write buf to the IFC NAND Controller Data Buffer
|
|
*/
|
|
static void fsl_ifc_write_buf(struct mtd_info *mtd, const u8 *buf, int len)
|
|
{
|
|
struct nand_chip *chip = mtd->priv;
|
|
struct fsl_ifc_mtd *priv = chip->priv;
|
|
struct fsl_ifc_ctrl *ctrl = priv->ctrl;
|
|
unsigned int bufsize = mtd->writesize + mtd->oobsize;
|
|
|
|
if (len <= 0) {
|
|
printf("%s of %d bytes", __func__, len);
|
|
ctrl->status = 0;
|
|
return;
|
|
}
|
|
|
|
if ((unsigned int)len > bufsize - ctrl->index) {
|
|
printf("%s beyond end of buffer "
|
|
"(%d requested, %u available)\n",
|
|
__func__, len, bufsize - ctrl->index);
|
|
len = bufsize - ctrl->index;
|
|
}
|
|
|
|
memcpy_toio(&ctrl->addr[ctrl->index], buf, len);
|
|
ctrl->index += len;
|
|
}
|
|
|
|
/*
|
|
* read a byte from either the IFC hardware buffer if it has any data left
|
|
* otherwise issue a command to read a single byte.
|
|
*/
|
|
static u8 fsl_ifc_read_byte(struct mtd_info *mtd)
|
|
{
|
|
struct nand_chip *chip = mtd->priv;
|
|
struct fsl_ifc_mtd *priv = chip->priv;
|
|
struct fsl_ifc_ctrl *ctrl = priv->ctrl;
|
|
|
|
/* If there are still bytes in the IFC buffer, then use the
|
|
* next byte. */
|
|
if (ctrl->index < ctrl->read_bytes)
|
|
return in_8(&ctrl->addr[ctrl->index++]);
|
|
|
|
printf("%s beyond end of buffer\n", __func__);
|
|
return ERR_BYTE;
|
|
}
|
|
|
|
/*
|
|
* Read two bytes from the IFC hardware buffer
|
|
* read function for 16-bit buswith
|
|
*/
|
|
static uint8_t fsl_ifc_read_byte16(struct mtd_info *mtd)
|
|
{
|
|
struct nand_chip *chip = mtd->priv;
|
|
struct fsl_ifc_mtd *priv = chip->priv;
|
|
struct fsl_ifc_ctrl *ctrl = priv->ctrl;
|
|
uint16_t data;
|
|
|
|
/*
|
|
* If there are still bytes in the IFC buffer, then use the
|
|
* next byte.
|
|
*/
|
|
if (ctrl->index < ctrl->read_bytes) {
|
|
data = in_be16((uint16_t *)&ctrl->
|
|
addr[ctrl->index]);
|
|
ctrl->index += 2;
|
|
return (uint8_t)data;
|
|
}
|
|
|
|
printf("%s beyond end of buffer\n", __func__);
|
|
return ERR_BYTE;
|
|
}
|
|
|
|
/*
|
|
* Read from the IFC Controller Data Buffer
|
|
*/
|
|
static void fsl_ifc_read_buf(struct mtd_info *mtd, u8 *buf, int len)
|
|
{
|
|
struct nand_chip *chip = mtd->priv;
|
|
struct fsl_ifc_mtd *priv = chip->priv;
|
|
struct fsl_ifc_ctrl *ctrl = priv->ctrl;
|
|
int avail;
|
|
|
|
if (len < 0)
|
|
return;
|
|
|
|
avail = min((unsigned int)len, ctrl->read_bytes - ctrl->index);
|
|
memcpy_fromio(buf, &ctrl->addr[ctrl->index], avail);
|
|
ctrl->index += avail;
|
|
|
|
if (len > avail)
|
|
printf("%s beyond end of buffer "
|
|
"(%d requested, %d available)\n",
|
|
__func__, len, avail);
|
|
}
|
|
|
|
/*
|
|
* Verify buffer against the IFC Controller Data Buffer
|
|
*/
|
|
static int fsl_ifc_verify_buf(struct mtd_info *mtd,
|
|
const u_char *buf, int len)
|
|
{
|
|
struct nand_chip *chip = mtd->priv;
|
|
struct fsl_ifc_mtd *priv = chip->priv;
|
|
struct fsl_ifc_ctrl *ctrl = priv->ctrl;
|
|
int i;
|
|
|
|
if (len < 0) {
|
|
printf("%s of %d bytes", __func__, len);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if ((unsigned int)len > ctrl->read_bytes - ctrl->index) {
|
|
printf("%s beyond end of buffer "
|
|
"(%d requested, %u available)\n",
|
|
__func__, len, ctrl->read_bytes - ctrl->index);
|
|
|
|
ctrl->index = ctrl->read_bytes;
|
|
return -EINVAL;
|
|
}
|
|
|
|
for (i = 0; i < len; i++)
|
|
if (in_8(&ctrl->addr[ctrl->index + i]) != buf[i])
|
|
break;
|
|
|
|
ctrl->index += len;
|
|
return i == len && ctrl->status == IFC_NAND_EVTER_STAT_OPC ? 0 : -EIO;
|
|
}
|
|
|
|
/* This function is called after Program and Erase Operations to
|
|
* check for success or failure.
|
|
*/
|
|
static int fsl_ifc_wait(struct mtd_info *mtd, struct nand_chip *chip)
|
|
{
|
|
struct fsl_ifc_mtd *priv = chip->priv;
|
|
struct fsl_ifc_ctrl *ctrl = priv->ctrl;
|
|
struct fsl_ifc *ifc = ctrl->regs;
|
|
u32 nand_fsr;
|
|
|
|
if (ctrl->status != IFC_NAND_EVTER_STAT_OPC)
|
|
return NAND_STATUS_FAIL;
|
|
|
|
/* Use READ_STATUS command, but wait for the device to be ready */
|
|
out_be32(&ifc->ifc_nand.nand_fir0,
|
|
(IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
|
|
(IFC_FIR_OP_RDSTAT << IFC_NAND_FIR0_OP1_SHIFT));
|
|
out_be32(&ifc->ifc_nand.nand_fcr0, NAND_CMD_STATUS <<
|
|
IFC_NAND_FCR0_CMD0_SHIFT);
|
|
out_be32(&ifc->ifc_nand.nand_fbcr, 1);
|
|
set_addr(mtd, 0, 0, 0);
|
|
ctrl->read_bytes = 1;
|
|
|
|
fsl_ifc_run_command(mtd);
|
|
|
|
if (ctrl->status != IFC_NAND_EVTER_STAT_OPC)
|
|
return NAND_STATUS_FAIL;
|
|
|
|
nand_fsr = in_be32(&ifc->ifc_nand.nand_fsr);
|
|
|
|
/* Chip sometimes reporting write protect even when it's not */
|
|
nand_fsr = nand_fsr | NAND_STATUS_WP;
|
|
return nand_fsr;
|
|
}
|
|
|
|
static int fsl_ifc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
|
|
uint8_t *buf, int oob_required, int page)
|
|
{
|
|
struct fsl_ifc_mtd *priv = chip->priv;
|
|
struct fsl_ifc_ctrl *ctrl = priv->ctrl;
|
|
|
|
fsl_ifc_read_buf(mtd, buf, mtd->writesize);
|
|
fsl_ifc_read_buf(mtd, chip->oob_poi, mtd->oobsize);
|
|
|
|
if (ctrl->status != IFC_NAND_EVTER_STAT_OPC)
|
|
mtd->ecc_stats.failed++;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* ECC will be calculated automatically, and errors will be detected in
|
|
* waitfunc.
|
|
*/
|
|
static int fsl_ifc_write_page(struct mtd_info *mtd, struct nand_chip *chip,
|
|
const uint8_t *buf, int oob_required)
|
|
{
|
|
fsl_ifc_write_buf(mtd, buf, mtd->writesize);
|
|
fsl_ifc_write_buf(mtd, chip->oob_poi, mtd->oobsize);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void fsl_ifc_ctrl_init(void)
|
|
{
|
|
ifc_ctrl = kzalloc(sizeof(*ifc_ctrl), GFP_KERNEL);
|
|
if (!ifc_ctrl)
|
|
return;
|
|
|
|
ifc_ctrl->regs = IFC_BASE_ADDR;
|
|
|
|
/* clear event registers */
|
|
out_be32(&ifc_ctrl->regs->ifc_nand.nand_evter_stat, ~0U);
|
|
out_be32(&ifc_ctrl->regs->ifc_nand.pgrdcmpl_evt_stat, ~0U);
|
|
|
|
/* Enable error and event for any detected errors */
|
|
out_be32(&ifc_ctrl->regs->ifc_nand.nand_evter_en,
|
|
IFC_NAND_EVTER_EN_OPC_EN |
|
|
IFC_NAND_EVTER_EN_PGRDCMPL_EN |
|
|
IFC_NAND_EVTER_EN_FTOER_EN |
|
|
IFC_NAND_EVTER_EN_WPER_EN);
|
|
|
|
out_be32(&ifc_ctrl->regs->ifc_nand.ncfgr, 0x0);
|
|
}
|
|
|
|
static void fsl_ifc_select_chip(struct mtd_info *mtd, int chip)
|
|
{
|
|
}
|
|
|
|
static void fsl_ifc_sram_init(void)
|
|
{
|
|
struct fsl_ifc *ifc = ifc_ctrl->regs;
|
|
uint32_t cs = 0, csor = 0, csor_8k = 0, csor_ext = 0;
|
|
long long end_tick;
|
|
|
|
cs = ifc_ctrl->cs_nand >> IFC_NAND_CSEL_SHIFT;
|
|
|
|
/* Save CSOR and CSOR_ext */
|
|
csor = in_be32(&ifc_ctrl->regs->csor_cs[cs].csor);
|
|
csor_ext = in_be32(&ifc_ctrl->regs->csor_cs[cs].csor_ext);
|
|
|
|
/* chage PageSize 8K and SpareSize 1K*/
|
|
csor_8k = (csor & ~(CSOR_NAND_PGS_MASK)) | 0x0018C000;
|
|
out_be32(&ifc_ctrl->regs->csor_cs[cs].csor, csor_8k);
|
|
out_be32(&ifc_ctrl->regs->csor_cs[cs].csor_ext, 0x0000400);
|
|
|
|
/* READID */
|
|
out_be32(&ifc->ifc_nand.nand_fir0,
|
|
(IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
|
|
(IFC_FIR_OP_UA << IFC_NAND_FIR0_OP1_SHIFT) |
|
|
(IFC_FIR_OP_RB << IFC_NAND_FIR0_OP2_SHIFT));
|
|
out_be32(&ifc->ifc_nand.nand_fcr0,
|
|
NAND_CMD_READID << IFC_NAND_FCR0_CMD0_SHIFT);
|
|
out_be32(&ifc->ifc_nand.row3, 0x0);
|
|
|
|
out_be32(&ifc->ifc_nand.nand_fbcr, 0x0);
|
|
|
|
/* Program ROW0/COL0 */
|
|
out_be32(&ifc->ifc_nand.row0, 0x0);
|
|
out_be32(&ifc->ifc_nand.col0, 0x0);
|
|
|
|
/* set the chip select for NAND Transaction */
|
|
out_be32(&ifc->ifc_nand.nand_csel, ifc_ctrl->cs_nand);
|
|
|
|
/* start read seq */
|
|
out_be32(&ifc->ifc_nand.nandseq_strt, IFC_NAND_SEQ_STRT_FIR_STRT);
|
|
|
|
/* wait for NAND Machine complete flag or timeout */
|
|
end_tick = usec2ticks(IFC_TIMEOUT_MSECS * 1000) + get_ticks();
|
|
|
|
while (end_tick > get_ticks()) {
|
|
ifc_ctrl->status = in_be32(&ifc->ifc_nand.nand_evter_stat);
|
|
|
|
if (ifc_ctrl->status & IFC_NAND_EVTER_STAT_OPC)
|
|
break;
|
|
}
|
|
|
|
out_be32(&ifc->ifc_nand.nand_evter_stat, ifc_ctrl->status);
|
|
|
|
/* Restore CSOR and CSOR_ext */
|
|
out_be32(&ifc_ctrl->regs->csor_cs[cs].csor, csor);
|
|
out_be32(&ifc_ctrl->regs->csor_cs[cs].csor_ext, csor_ext);
|
|
}
|
|
|
|
static int fsl_ifc_chip_init(int devnum, u8 *addr)
|
|
{
|
|
struct mtd_info *mtd = &nand_info[devnum];
|
|
struct nand_chip *nand;
|
|
struct fsl_ifc_mtd *priv;
|
|
struct nand_ecclayout *layout;
|
|
uint32_t cspr = 0, csor = 0, ver = 0;
|
|
int ret;
|
|
|
|
if (!ifc_ctrl) {
|
|
fsl_ifc_ctrl_init();
|
|
if (!ifc_ctrl)
|
|
return -1;
|
|
}
|
|
|
|
priv = kzalloc(sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
priv->ctrl = ifc_ctrl;
|
|
priv->vbase = addr;
|
|
|
|
/* Find which chip select it is connected to.
|
|
*/
|
|
for (priv->bank = 0; priv->bank < MAX_BANKS; priv->bank++) {
|
|
phys_addr_t phys_addr = virt_to_phys(addr);
|
|
|
|
cspr = in_be32(&ifc_ctrl->regs->cspr_cs[priv->bank].cspr);
|
|
csor = in_be32(&ifc_ctrl->regs->csor_cs[priv->bank].csor);
|
|
|
|
if ((cspr & CSPR_V) && (cspr & CSPR_MSEL) == CSPR_MSEL_NAND &&
|
|
(cspr & CSPR_BA) == CSPR_PHYS_ADDR(phys_addr)) {
|
|
ifc_ctrl->cs_nand = priv->bank << IFC_NAND_CSEL_SHIFT;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (priv->bank >= MAX_BANKS) {
|
|
printf("%s: address did not match any "
|
|
"chip selects\n", __func__);
|
|
kfree(priv);
|
|
return -ENODEV;
|
|
}
|
|
|
|
nand = &priv->chip;
|
|
mtd->priv = nand;
|
|
|
|
ifc_ctrl->chips[priv->bank] = priv;
|
|
|
|
/* fill in nand_chip structure */
|
|
/* set up function call table */
|
|
|
|
nand->write_buf = fsl_ifc_write_buf;
|
|
nand->read_buf = fsl_ifc_read_buf;
|
|
nand->verify_buf = fsl_ifc_verify_buf;
|
|
nand->select_chip = fsl_ifc_select_chip;
|
|
nand->cmdfunc = fsl_ifc_cmdfunc;
|
|
nand->waitfunc = fsl_ifc_wait;
|
|
|
|
/* set up nand options */
|
|
nand->bbt_td = &bbt_main_descr;
|
|
nand->bbt_md = &bbt_mirror_descr;
|
|
|
|
/* set up nand options */
|
|
nand->options = NAND_NO_SUBPAGE_WRITE;
|
|
nand->bbt_options = NAND_BBT_USE_FLASH;
|
|
|
|
if (cspr & CSPR_PORT_SIZE_16) {
|
|
nand->read_byte = fsl_ifc_read_byte16;
|
|
nand->options |= NAND_BUSWIDTH_16;
|
|
} else {
|
|
nand->read_byte = fsl_ifc_read_byte;
|
|
}
|
|
|
|
nand->controller = &ifc_ctrl->controller;
|
|
nand->priv = priv;
|
|
|
|
nand->ecc.read_page = fsl_ifc_read_page;
|
|
nand->ecc.write_page = fsl_ifc_write_page;
|
|
|
|
/* Hardware generates ECC per 512 Bytes */
|
|
nand->ecc.size = 512;
|
|
nand->ecc.bytes = 8;
|
|
|
|
switch (csor & CSOR_NAND_PGS_MASK) {
|
|
case CSOR_NAND_PGS_512:
|
|
if (nand->options & NAND_BUSWIDTH_16) {
|
|
layout = &oob_512_16bit_ecc4;
|
|
} else {
|
|
layout = &oob_512_8bit_ecc4;
|
|
|
|
/* Avoid conflict with bad block marker */
|
|
bbt_main_descr.offs = 0;
|
|
bbt_mirror_descr.offs = 0;
|
|
}
|
|
|
|
nand->ecc.strength = 4;
|
|
priv->bufnum_mask = 15;
|
|
break;
|
|
|
|
case CSOR_NAND_PGS_2K:
|
|
layout = &oob_2048_ecc4;
|
|
nand->ecc.strength = 4;
|
|
priv->bufnum_mask = 3;
|
|
break;
|
|
|
|
case CSOR_NAND_PGS_4K:
|
|
if ((csor & CSOR_NAND_ECC_MODE_MASK) ==
|
|
CSOR_NAND_ECC_MODE_4) {
|
|
layout = &oob_4096_ecc4;
|
|
nand->ecc.strength = 4;
|
|
} else {
|
|
layout = &oob_4096_ecc8;
|
|
nand->ecc.strength = 8;
|
|
nand->ecc.bytes = 16;
|
|
}
|
|
|
|
priv->bufnum_mask = 1;
|
|
break;
|
|
|
|
default:
|
|
printf("ifc nand: bad csor %#x: bad page size\n", csor);
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* Must also set CSOR_NAND_ECC_ENC_EN if DEC_EN set */
|
|
if (csor & CSOR_NAND_ECC_DEC_EN) {
|
|
nand->ecc.mode = NAND_ECC_HW;
|
|
nand->ecc.layout = layout;
|
|
} else {
|
|
nand->ecc.mode = NAND_ECC_SOFT;
|
|
}
|
|
|
|
ver = in_be32(&ifc_ctrl->regs->ifc_rev);
|
|
if (ver == FSL_IFC_V1_1_0)
|
|
fsl_ifc_sram_init();
|
|
|
|
ret = nand_scan_ident(mtd, 1, NULL);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = nand_scan_tail(mtd);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = nand_register(devnum);
|
|
if (ret)
|
|
return ret;
|
|
return 0;
|
|
}
|
|
|
|
#ifndef CONFIG_SYS_NAND_BASE_LIST
|
|
#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE }
|
|
#endif
|
|
|
|
static unsigned long base_address[CONFIG_SYS_MAX_NAND_DEVICE] =
|
|
CONFIG_SYS_NAND_BASE_LIST;
|
|
|
|
void board_nand_init(void)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
|
|
fsl_ifc_chip_init(i, (u8 *)base_address[i]);
|
|
}
|
|
|