upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
251 lines
7.5 KiB
251 lines
7.5 KiB
/*
|
|
* AMIRIX.h: AMIRIX specific config options
|
|
*
|
|
* Author : Frank Smith (smith at amirix dot com)
|
|
*
|
|
* Derived from : other configuration header files in this tree
|
|
*
|
|
* This software may be used and distributed according to the terms of
|
|
* the GNU General Public License (GPL) version 2, incorporated herein by
|
|
* reference. Drivers based on or derived from this code fall under the GPL
|
|
* and must retain the authorship, copyright and this license notice. This
|
|
* file is not a complete program and may only be used when the entire
|
|
* program is licensed under the GPL.
|
|
*
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
/*
|
|
* High Level Configuration Options
|
|
* (easy to change)
|
|
*/
|
|
|
|
#undef DEBUG
|
|
|
|
#define CONFIG_405 1 /* This is a PPC405 CPU */
|
|
#define CONFIG_4xx 1 /* ...member of PPC4xx family */
|
|
|
|
#define CONFIG_AP1000 1 /* ...on an AP1000 board */
|
|
|
|
#define CONFIG_PCI 1
|
|
|
|
#define CFG_HUSH_PARSER 1 /* use "hush" command parser */
|
|
#define CFG_PROMPT "0> "
|
|
#define CFG_PROMPT_HUSH_PS2 "> "
|
|
|
|
#define CONFIG_COMMAND_EDIT 1
|
|
#define CONFIG_COMMAND_HISTORY 1
|
|
#define CONFIG_COMPLETE_ADDRESSES 1
|
|
|
|
#define CFG_ENV_IS_IN_FLASH 1
|
|
#define CFG_FLASH_USE_BUFFER_WRITE
|
|
|
|
#ifdef CFG_ENV_IS_IN_NVRAM
|
|
#undef CFG_ENV_IS_IN_FLASH
|
|
#else
|
|
#ifdef CFG_ENV_IS_IN_FLASH
|
|
#undef CFG_ENV_IS_IN_NVRAM
|
|
#endif
|
|
#endif
|
|
|
|
#define CONFIG_BAUDRATE 57600
|
|
#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */
|
|
|
|
#define CONFIG_BOOTCOMMAND "" /* autoboot command */
|
|
|
|
/* Size (bytes) of interrupt driven serial port buffer.
|
|
* Set to 0 to use polling instead of interrupts.
|
|
* Setting to 0 will also disable RTS/CTS handshaking.
|
|
*/
|
|
#undef CONFIG_SERIAL_SOFTWARE_FIFO
|
|
|
|
#define CONFIG_BOOTARGS "console=ttyS0,57600"
|
|
|
|
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
|
|
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
|
|
|
|
|
|
/*
|
|
* BOOTP options
|
|
*/
|
|
#define CONFIG_BOOTP_BOOTFILESIZE
|
|
#define CONFIG_BOOTP_BOOTPATH
|
|
#define CONFIG_BOOTP_GATEWAY
|
|
#define CONFIG_BOOTP_HOSTNAME
|
|
|
|
/*
|
|
* Command line configuration.
|
|
*/
|
|
#include <config_cmd_default.h>
|
|
|
|
#define CONFIG_CMD_ASKENV
|
|
#define CONFIG_CMD_DHCP
|
|
#define CONFIG_CMD_ELF
|
|
#define CONFIG_CMD_IRQ
|
|
#define CONFIG_CMD_MVENV
|
|
#define CONFIG_CMD_PCI
|
|
#define CONFIG_CMD_PING
|
|
|
|
|
|
#undef CONFIG_WATCHDOG /* watchdog disabled */
|
|
|
|
#define CONFIG_SYS_CLK_FREQ 30000000
|
|
|
|
#define CONFIG_SPD_EEPROM 1 /* use SPD EEPROM for setup */
|
|
|
|
/*
|
|
* Miscellaneous configurable options
|
|
*/
|
|
#define CFG_LONGHELP /* undef to save memory */
|
|
#if defined(CONFIG_CMD_KGDB)
|
|
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
|
|
#else
|
|
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
|
|
#endif
|
|
/* usually: (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) */
|
|
#define CFG_PBSIZE (CFG_CBSIZE+4+16) /* Print Buffer Size */
|
|
#define CFG_MAXARGS 16 /* max number of command args */
|
|
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
|
|
|
|
#define CFG_ALT_MEMTEST 1
|
|
#define CFG_MEMTEST_START 0x00400000 /* memtest works on */
|
|
#define CFG_MEMTEST_END 0x01000000 /* 4 ... 16 MB in DRAM */
|
|
|
|
/*
|
|
* If CFG_EXT_SERIAL_CLOCK, then the UART divisor is 1.
|
|
* If CFG_405_UART_ERRATA_59, then UART divisor is 31.
|
|
* Otherwise, UART divisor is determined by CPU Clock and CFG_BASE_BAUD value.
|
|
* The Linux BASE_BAUD define should match this configuration.
|
|
* baseBaud = cpuClock/(uartDivisor*16)
|
|
* If CFG_405_UART_ERRATA_59 and 200MHz CPU clock,
|
|
* set Linux BASE_BAUD to 403200.
|
|
*/
|
|
#undef CFG_EXT_SERIAL_CLOCK /* external serial clock */
|
|
#undef CFG_405_UART_ERRATA_59 /* 405GP/CR Rev. D silicon */
|
|
|
|
#define CFG_NS16550_CLK 40000000
|
|
#define CFG_DUART_CHAN 0
|
|
#define CFG_NS16550_COM1 (0x4C000000 + 0x1000)
|
|
#define CFG_NS16550_COM2 (0x4C800000 + 0x1000)
|
|
#define CFG_NS16550_REG_SIZE 4
|
|
#define CFG_NS16550 1
|
|
#define CFG_INIT_CHAN1 1
|
|
#define CFG_INIT_CHAN2 0
|
|
|
|
/* The following table includes the supported baudrates */
|
|
#define CFG_BAUDRATE_TABLE \
|
|
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
|
|
|
|
#define CFG_LOAD_ADDR 0x00200000 /* default load address */
|
|
#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
|
|
|
|
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Start addresses for the final memory configuration
|
|
* (Set up by the startup code)
|
|
* Please note that CFG_SDRAM_BASE _must_ start at 0
|
|
*/
|
|
#define CFG_SDRAM_BASE 0x00000000
|
|
#define CFG_FLASH_BASE 0x20000000
|
|
#define CFG_MONITOR_BASE TEXT_BASE
|
|
#define CFG_MONITOR_LEN (192 * 1024) /* Reserve 196 kB for Monitor */
|
|
#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */
|
|
|
|
/*
|
|
* For booting Linux, the board info and command line data
|
|
* have to be in the first 8 MB of memory, since this is
|
|
* the maximum mapped by the Linux kernel during initialization.
|
|
*/
|
|
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
|
|
/*-----------------------------------------------------------------------
|
|
* FLASH organization
|
|
*/
|
|
#define CFG_FLASH_CFI 1
|
|
#define CFG_PROGFLASH_BASE CFG_FLASH_BASE
|
|
#define CFG_CONFFLASH_BASE 0x24000000
|
|
|
|
#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
|
|
#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
|
|
|
|
#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
|
|
#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
|
|
|
|
#define CFG_FLASH_PROTECTION 1 /* use hardware protection */
|
|
|
|
/* BEG ENVIRONNEMENT FLASH */
|
|
#ifdef CFG_ENV_IS_IN_FLASH
|
|
#define CFG_ENV_OFFSET 0x00040000 /* Offset of Environment Sector */
|
|
#define CFG_ENV_SIZE 0x1000 /* Total Size of Environment Sector */
|
|
#define CFG_ENV_SECT_SIZE 0x20000 /* see README - env sector total size */
|
|
#endif
|
|
/* END ENVIRONNEMENT FLASH */
|
|
/*-----------------------------------------------------------------------
|
|
* NVRAM organization
|
|
*/
|
|
#define CFG_NVRAM_BASE_ADDR 0xf0000000 /* NVRAM base address */
|
|
#define CFG_NVRAM_SIZE 0x1ff8 /* NVRAM size */
|
|
|
|
#ifdef CFG_ENV_IS_IN_NVRAM
|
|
#define CFG_ENV_SIZE 0x1000 /* Size of Environment vars */
|
|
#define CFG_ENV_ADDR \
|
|
(CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-CFG_ENV_SIZE) /* Env */
|
|
#endif
|
|
|
|
/*
|
|
* Init Memory Controller:
|
|
*
|
|
* BR0/1 and OR0/1 (FLASH)
|
|
*/
|
|
|
|
#define FLASH_BASE0_PRELIM CFG_FLASH_BASE /* FLASH bank #0 */
|
|
#define FLASH_BASE1_PRELIM 0 /* FLASH bank #1 */
|
|
|
|
/* Configuration Port location */
|
|
#define CONFIG_PORT_ADDR 0xF0000500
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Definitions for initial stack pointer and data area (in DPRAM)
|
|
*/
|
|
|
|
#define CFG_INIT_RAM_ADDR 0x400000 /* inside of SDRAM */
|
|
#define CFG_INIT_RAM_END 0x2000 /* End of used area in RAM */
|
|
#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
|
|
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
|
|
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Definitions for Serial Presence Detect EEPROM address
|
|
* (to get SDRAM settings)
|
|
*/
|
|
#define SPD_EEPROM_ADDRESS 0x50
|
|
|
|
/*
|
|
* Internal Definitions
|
|
*
|
|
* Boot Flags
|
|
*/
|
|
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
|
|
#define BOOTFLAG_WARM 0x02 /* Software reboot */
|
|
|
|
#if defined(CONFIG_CMD_KGDB)
|
|
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
|
|
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
|
|
#endif
|
|
|
|
/* JFFS2 stuff */
|
|
|
|
#define CFG_JFFS2_FIRST_BANK 0
|
|
#define CFG_JFFS2_NUM_BANKS 1
|
|
#define CFG_JFFS2_FIRST_SECTOR 1
|
|
|
|
#define CONFIG_NET_MULTI
|
|
#define CONFIG_E1000
|
|
|
|
#define CFG_ETH_DEV_FN 0x0800
|
|
#define CFG_ETH_IOBASE 0x31000000
|
|
#define CFG_ETH_MEMBASE 0x32000000
|
|
|
|
#endif /* __CONFIG_H */
|
|
|