upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support

You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

Siarhei Siamashka e626d2d446 sunxi: dram: Respect the DDR3 reset timing requirements ... The RESET pin needs to be kept low for at least 200 us according to the DDR3 spec. So just do it the right way. This issue did not cause any visible major problems earlier, because the DRAM RESET pin is usually already low after the board reset. And the time gap before reaching the sunxi u-boot DRAM initialization code appeared to be sufficient. Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> Acked-by: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Hans de Goede <hdegoede@redhat.com>		11 years ago
..
am33xx	am43xx: Tune the system to avoid DSS underflows	11 years ago
at91	ARMv7: at91: enable ICache and DCache.	11 years ago
bcm281xx	…
exynos	Merge remote-tracking branch 'u-boot-samsung/master'	11 years ago
highbank	…
keystone	ARM: keystone2: spl: add K2E SoC support	11 years ago
kona-common	…
mx5	…
mx6	mx6: soc: Update the comments of set_ldo_voltage()	11 years ago
omap-common	ARM: omap: clean redundant PISMO_xx macros used in OMAP3	11 years ago
omap3	ARM: omap: Remove unused arch/arm/cpu/armv7/omap3/mem.c	11 years ago
omap4	…
omap5	…
rmobile	arm: rmobile: Add support R8A7794	11 years ago
s5p-common	…
s5pc1xx	…
socfpga	socfpga: Relocate arch common functions away from board	11 years ago
sunxi	sunxi: dram: Respect the DDR3 reset timing requirements	11 years ago
tegra-common	…
tegra20	tegra20: display: fix checking of return value	11 years ago
tegra30	…
tegra114	…
tegra124	…
u8500	…
vf610	…
zynq	ARM: zynq: Show ECC status on the same line as DRAM size	11 years ago
Makefile	ARM: HYP/non-sec/PSCI: emit DT nodes	11 years ago
arch_timer.c	…
cache_v7.c	ARM: cache_v7: use __weak	11 years ago
config.mk	…
cpu.c	…
lowlevel_init.S	…
nonsec_virt.S	ARM: HYP/non-sec: add the option for a second-stage monitor	11 years ago
psci.S	ARM: HYP/non-sec: add generic ARMv7 PSCI code	11 years ago
start.S	…
syslib.c	…
virt-dt.c	ARM: HYP/non-sec/PSCI: emit DT nodes	11 years ago
virt-v7.c	ARM: HYP/non-sec: remove MIDR check to validate CBAR	11 years ago