upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/examples/standalone/smc91111_eeprom.c

388 lines
7.9 KiB

/*
* (C) Copyright 2004
* Robin Getz rgetz@blacfin.uclinux.org
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
* Heavily borrowed from the following peoples GPL'ed software:
* - Wolfgang Denk, DENX Software Engineering, wd@denx.de
* Das U-boot
* - Ladislav Michl ladis@linux-mips.org
* A rejected patch on the U-Boot mailing list
*/
#include <common.h>
#include <exports.h>
#include "../drivers/net/smc91111.h"
#ifndef SMC91111_EEPROM_INIT
# define SMC91111_EEPROM_INIT()
#endif
#define SMC_BASE_ADDRESS CONFIG_SMC91111_BASE
#define EEPROM 0x1
#define MAC 0x2
#define UNKNOWN 0x4
void dump_reg (struct eth_device *dev);
void dump_eeprom (struct eth_device *dev);
int write_eeprom_reg (struct eth_device *dev, int value, int reg);
void copy_from_eeprom (struct eth_device *dev);
void print_MAC (struct eth_device *dev);
int read_eeprom_reg (struct eth_device *dev, int reg);
void print_macaddr (struct eth_device *dev);
int smc91111_eeprom (int argc, char * const argv[])
{
int c, i, j, done, line, reg, value, start, what;
char input[50];
struct eth_device dev;
dev.iobase = CONFIG_SMC91111_BASE;
/* Print the ABI version */
app_startup (argv);
if (XF_VERSION != (int) get_version ()) {
printf ("Expects ABI version %d\n", XF_VERSION);
printf ("Actual U-Boot ABI version %d\n",
(int) get_version ());
printf ("Can't run\n\n");
return (0);
}
SMC91111_EEPROM_INIT();
if ((SMC_inw (&dev, BANK_SELECT) & 0xFF00) != 0x3300) {
printf ("Can't find SMSC91111\n");
return (0);
}
done = 0;
what = UNKNOWN;
printf ("\n");
while (!done) {
/* print the prompt */
printf ("SMC91111> ");
line = 0;
i = 0;
start = 1;
while (!line) {
/* Wait for a keystroke */
while (!tstc ());
c = getc ();
/* Make Uppercase */
if (c >= 'Z')
c -= ('a' - 'A');
/* printf(" |%02x| ",c); */
switch (c) {
case '\r': /* Enter */
case '\n':
input[i] = 0;
puts ("\r\n");
line = 1;
break;
case '\0': /* nul */
continue;
case 0x03: /* ^C - break */
input[0] = 0;
i = 0;
line = 1;
done = 1;
break;
case 0x5F:
case 0x08: /* ^H - backspace */
case 0x7F: /* DEL - backspace */
if (i > 0) {
puts ("\b \b");
i--;
}
break;
default:
if (start) {
if ((c == 'W') || (c == 'D')
|| (c == 'M') || (c == 'C')
|| (c == 'P')) {
putc (c);
input[i] = c;
if (i <= 45)
i++;
start = 0;
}
} else {
if ((c >= '0' && c <= '9')
|| (c >= 'A' && c <= 'F')
|| (c == 'E') || (c == 'M')
|| (c == ' ')) {
putc (c);
input[i] = c;
if (i <= 45)
i++;
break;
}
}
break;
}
}
for (; i < 49; i++)
input[i] = 0;
switch (input[0]) {
case ('W'):
/* Line should be w reg value */
i = 0;
reg = 0;
value = 0;
/* Skip to the next space or end) */
while ((input[i] != ' ') && (input[i] != 0))
i++;
if (input[i] != 0)
i++;
/* Are we writing to EEPROM or MAC */
switch (input[i]) {
case ('E'):
what = EEPROM;
break;
case ('M'):
what = MAC;
break;
default:
what = UNKNOWN;
break;
}
/* skip to the next space or end */
while ((input[i] != ' ') && (input[i] != 0))
i++;
if (input[i] != 0)
i++;
/* Find register to write into */
j = 0;
while ((input[i] != ' ') && (input[i] != 0)) {
j = input[i] - 0x30;
if (j >= 0xA) {
j -= 0x07;
}
reg = (reg * 0x10) + j;
i++;
}
while ((input[i] != ' ') && (input[i] != 0))
i++;
if (input[i] != 0)
i++;
else
what = UNKNOWN;
/* Get the value to write */
j = 0;
while ((input[i] != ' ') && (input[i] != 0)) {
j = input[i] - 0x30;
if (j >= 0xA) {
j -= 0x07;
}
value = (value * 0x10) + j;
i++;
}
switch (what) {
case 1:
printf ("Writing EEPROM register %02x with %04x\n", reg, value);
write_eeprom_reg (&dev, value, reg);
break;
case 2:
printf ("Writing MAC register bank %i, reg %02x with %04x\n", reg >> 4, reg & 0xE, value);
SMC_SELECT_BANK (&dev, reg >> 4);
SMC_outw (&dev, value, reg & 0xE);
break;
default:
printf ("Wrong\n");
break;
}
break;
case ('D'):
dump_eeprom (&dev);
break;
case ('M'):
dump_reg (&dev);
break;
case ('C'):
copy_from_eeprom (&dev);
break;
case ('P'):
print_macaddr (&dev);
break;
default:
break;
}
}
return (0);
}
void copy_from_eeprom (struct eth_device *dev)
{
int i;
SMC_SELECT_BANK (dev, 1);
SMC_outw (dev, (SMC_inw (dev, CTL_REG) & !CTL_EEPROM_SELECT) |
CTL_RELOAD, CTL_REG);
i = 100;
while ((SMC_inw (dev, CTL_REG) & CTL_RELOAD) && --i)
udelay (100);
if (i == 0) {
printf ("Timeout Refreshing EEPROM registers\n");
} else {
printf ("EEPROM contents copied to MAC\n");
}
}
void print_macaddr (struct eth_device *dev)
{
int i, j, k, mac[6];
printf ("Current MAC Address in SMSC91111 ");
SMC_SELECT_BANK (dev, 1);
for (i = 0; i < 5; i++) {
printf ("%02x:", SMC_inb (dev, ADDR0_REG + i));
}
printf ("%02x\n", SMC_inb (dev, ADDR0_REG + 5));
i = 0;
for (j = 0x20; j < 0x23; j++) {
k = read_eeprom_reg (dev, j);
mac[i] = k & 0xFF;
i++;
mac[i] = k >> 8;
i++;
}
printf ("Current MAC Address in EEPROM ");
for (i = 0; i < 5; i++)
printf ("%02x:", mac[i]);
printf ("%02x\n", mac[5]);
}
void dump_eeprom (struct eth_device *dev)
{
int j, k;
printf ("IOS2-0 ");
for (j = 0; j < 8; j++) {
printf ("%03x ", j);
}
printf ("\n");
for (k = 0; k < 4; k++) {
if (k == 0)
printf ("CONFIG ");
if (k == 1)
printf ("BASE ");
if ((k == 2) || (k == 3))
printf (" ");
for (j = 0; j < 0x20; j += 4) {
printf ("%02x:%04x ", j + k,
read_eeprom_reg (dev, j + k));
}
printf ("\n");
}
for (j = 0x20; j < 0x40; j++) {
if ((j & 0x07) == 0)
printf ("\n");
printf ("%02x:%04x ", j, read_eeprom_reg (dev, j));
}
printf ("\n");
}
int read_eeprom_reg (struct eth_device *dev, int reg)
{
int timeout;
SMC_SELECT_BANK (dev, 2);
SMC_outw (dev, reg, PTR_REG);
SMC_SELECT_BANK (dev, 1);
SMC_outw (dev, SMC_inw (dev, CTL_REG) | CTL_EEPROM_SELECT |
CTL_RELOAD, CTL_REG);
timeout = 100;
while ((SMC_inw (dev, CTL_REG) & CTL_RELOAD) && --timeout)
udelay (100);
if (timeout == 0) {
printf ("Timeout Reading EEPROM register %02x\n", reg);
return 0;
}
return SMC_inw (dev, GP_REG);
}
int write_eeprom_reg (struct eth_device *dev, int value, int reg)
{
int timeout;
SMC_SELECT_BANK (dev, 2);
SMC_outw (dev, reg, PTR_REG);
SMC_SELECT_BANK (dev, 1);
SMC_outw (dev, value, GP_REG);
SMC_outw (dev, SMC_inw (dev, CTL_REG) | CTL_EEPROM_SELECT |
CTL_STORE, CTL_REG);
timeout = 100;
while ((SMC_inw (dev, CTL_REG) & CTL_STORE) && --timeout)
udelay (100);
if (timeout == 0) {
printf ("Timeout Writing EEPROM register %02x\n", reg);
return 0;
}
return 1;
}
void dump_reg (struct eth_device *dev)
{
int i, j;
printf (" ");
for (j = 0; j < 4; j++) {
printf ("Bank%i ", j);
}
printf ("\n");
for (i = 0; i < 0xF; i += 2) {
printf ("%02x ", i);
for (j = 0; j < 4; j++) {
SMC_SELECT_BANK (dev, j);
printf ("%04x ", SMC_inw (dev, i));
}
printf ("\n");
}
}