upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
Fabio Estevam
db4ecd1fe8
|
9 years ago | |
|---|---|---|
| .. | ||
| Kconfig | ||
| MAINTAINERS | ||
| Makefile | ||
| README | ||
| mx6q_4x_mt41j128.cfg | ||
| ot1200.c | ||
| ot1200_spl.c | 9 years ago | |
README
U-Boot for the Bachmann electronic GmbH OT1200 devices
There are two different versions of the base board, which differ
in the way ethernet is done. The variant detection is done during
runtime based on the address of the found phy.
- "mr" variant
FEC is connected directly to an ethernet switch (KSZ8895). The ethernet
port is always up and auto-negotiation is not possible.
- normal variant
FEC is connected to a normal phy and auto-negotiation is possible.
The variant name is part of the dtb file name loaded by u-boot. This
make is possible to boot the linux kernel and make use variant specific
devicetree (fixed-phy link).
In order to support different display resoltuions/sizes the OT1200 devices
are making use of EDID data stored in an i2c EEPROM.