upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
148 lines
3.4 KiB
148 lines
3.4 KiB
#include <config.h>
|
|
#include <mpc85xx.h>
|
|
#include <version.h>
|
|
|
|
#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
|
|
|
|
#include <ppc_asm.tmpl>
|
|
#include <ppc_defs.h>
|
|
|
|
#include <asm/cache.h>
|
|
#include <asm/mmu.h>
|
|
|
|
/* To boot secondary cpus, we need a place for them to start up.
|
|
* Normally, they start at 0xfffffffc, but that's usually the
|
|
* firmware, and we don't want to have to run the firmware again.
|
|
* Instead, the primary cpu will set the BPTR to point here to
|
|
* this page. We then set up the core, and head to
|
|
* start_secondary. Note that this means that the code below
|
|
* must never exceed 1023 instructions (the branch at the end
|
|
* would then be the 1024th).
|
|
*/
|
|
.globl __secondary_start_page
|
|
.align 12
|
|
__secondary_start_page:
|
|
/* First do some preliminary setup */
|
|
lis r3, HID0_EMCP@h /* enable machine check */
|
|
ori r3,r3,HID0_TBEN@l /* enable Timebase */
|
|
#ifdef CONFIG_PHYS_64BIT
|
|
ori r3,r3,HID0_ENMAS7@l /* enable MAS7 updates */
|
|
#endif
|
|
mtspr SPRN_HID0,r3
|
|
|
|
li r3,(HID1_ASTME|HID1_ABE)@l /* Addr streaming & broadcast */
|
|
mtspr SPRN_HID1,r3
|
|
|
|
/* Enable branch prediction */
|
|
li r3,0x201
|
|
mtspr SPRN_BUCSR,r3
|
|
|
|
/* Enable/invalidate the I-Cache */
|
|
mfspr r0,SPRN_L1CSR1
|
|
ori r0,r0,(L1CSR1_ICFI|L1CSR1_ICE)
|
|
mtspr SPRN_L1CSR1,r0
|
|
isync
|
|
|
|
/* Enable/invalidate the D-Cache */
|
|
mfspr r0,SPRN_L1CSR0
|
|
ori r0,r0,(L1CSR0_DCFI|L1CSR0_DCE)
|
|
msync
|
|
isync
|
|
mtspr SPRN_L1CSR0,r0
|
|
isync
|
|
|
|
#define toreset(x) (x - __secondary_start_page + 0xfffff000)
|
|
|
|
/* get our PIR to figure out our table entry */
|
|
lis r3,toreset(__spin_table)@h
|
|
ori r3,r3,toreset(__spin_table)@l
|
|
|
|
/* r9 has the base address for the entry */
|
|
mfspr r0,SPRN_PIR
|
|
mr r4,r0
|
|
slwi r8,r4,4
|
|
slwi r9,r4,3
|
|
add r8,r8,r9
|
|
add r9,r3,r8
|
|
|
|
#define EPAPR_MAGIC (0x65504150)
|
|
#define ENTRY_ADDR 0
|
|
#define ENTRY_PIR 4
|
|
#define ENTRY_R3 8
|
|
#define ENTRY_R4 12
|
|
#define ENTRY_R6 16
|
|
#define ENTRY_R7 20
|
|
|
|
/* setup the entry */
|
|
li r4,0
|
|
li r8,1
|
|
lis r6,EPAPR_MAGIC@h
|
|
ori r6,r6,EPAPR_MAGIC@l
|
|
stw r0,ENTRY_PIR(r9)
|
|
stw r8,ENTRY_ADDR(r9)
|
|
stw r4,ENTRY_R3(r9)
|
|
stw r4,ENTRY_R4(r9)
|
|
stw r6,ENTRY_R6(r9)
|
|
stw r4,ENTRY_R7(r9)
|
|
|
|
/* spin waiting for addr */
|
|
1: lwz r4,ENTRY_ADDR(r9)
|
|
andi. r11,r4,1
|
|
bne 1b
|
|
|
|
/* setup branch addr */
|
|
mtctr r4
|
|
|
|
/* mark the entry as released */
|
|
li r8,3
|
|
stw r8,ENTRY_ADDR(r9)
|
|
|
|
/* mask by ~64M to setup our tlb we will jump to */
|
|
rlwinm r8,r4,0,0,5
|
|
|
|
/* setup r3, r5, r6, r7 */
|
|
lwz r3,ENTRY_R3(r9)
|
|
lwz r4,ENTRY_R4(r9)
|
|
li r5,0
|
|
lwz r6,ENTRY_R6(r9)
|
|
lwz r7,ENTRY_R7(r9)
|
|
|
|
/* load up the pir */
|
|
lwz r0,ENTRY_PIR(r9)
|
|
mtspr SPRN_PIR,r0
|
|
mfspr r0,SPRN_PIR
|
|
stw r0,ENTRY_PIR(r9)
|
|
|
|
/*
|
|
* Coming here, we know the cpu has one TLB mapping in TLB1[0]
|
|
* which maps 0xfffff000-0xffffffff one-to-one. We set up a
|
|
* second mapping that maps addr 1:1 for 64M, and then we jump to
|
|
* addr
|
|
*/
|
|
lis r9,(MAS0_TLBSEL(1)|MAS0_ESEL(1))@h
|
|
mtspr SPRN_MAS0,r9
|
|
lis r9,(MAS1_VALID|MAS1_IPROT)@h
|
|
ori r9,r9,(MAS1_TSIZE(BOOKE_PAGESZ_64M))@l
|
|
mtspr SPRN_MAS1,r9
|
|
/* WIMGE = 0b00000 for now */
|
|
mtspr SPRN_MAS2,r8
|
|
ori r8,r8,(MAS3_SX|MAS3_SW|MAS3_SR)
|
|
mtspr SPRN_MAS3,r8
|
|
tlbwe
|
|
|
|
/* Now we have another mapping for this page, so we jump to that
|
|
* mapping
|
|
*/
|
|
bctr
|
|
|
|
.align 3
|
|
.globl __spin_table
|
|
__spin_table:
|
|
.space CONFIG_NR_CPUS*24
|
|
|
|
/* Fill in the empty space. The actual reset vector is
|
|
* the last word of the page */
|
|
__secondary_start_code_end:
|
|
.space 4092 - (__secondary_start_code_end - __secondary_start_page)
|
|
__secondary_reset_vector:
|
|
b __secondary_start_page
|
|
|