upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
185 lines
5.0 KiB
185 lines
5.0 KiB
/*
|
|
* Board specific setup info
|
|
*
|
|
* (C) Copyright 2004
|
|
* Texas Instruments, <www.ti.com>
|
|
* Richard Woodruff <r-woodruff2@ti.com>
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <config.h>
|
|
#include <version.h>
|
|
#include <asm/arch/omap2420.h>
|
|
#include <asm/arch/mem.h>
|
|
#include <asm/arch/clocks.h>
|
|
|
|
_TEXT_BASE:
|
|
.word CONFIG_SYS_TEXT_BASE /* sdram load addr from config.mk */
|
|
|
|
/**************************************************************************
|
|
* cpy_clk_code: relocates clock code into SRAM where its safer to execute
|
|
* R1 = SRAM destination address.
|
|
*************************************************************************/
|
|
.global cpy_clk_code
|
|
cpy_clk_code:
|
|
/* Copy DPLL code into SRAM */
|
|
adr r0, go_to_speed /* get addr of clock setting code */
|
|
mov r2, #384 /* r2 size to copy (div by 32 bytes) */
|
|
mov r1, r1 /* r1 <- dest address (passed in) */
|
|
add r2, r2, r0 /* r2 <- source end address */
|
|
next2:
|
|
ldmia r0!, {r3-r10} /* copy from source address [r0] */
|
|
stmia r1!, {r3-r10} /* copy to target address [r1] */
|
|
cmp r0, r2 /* until source end address [r2] */
|
|
bne next2
|
|
mov pc, lr /* back to caller */
|
|
|
|
/* ****************************************************************************
|
|
* go_to_speed: -Moves to bypass, -Commits clock dividers, -puts dpll at speed
|
|
* -executed from SRAM.
|
|
* R0 = PRCM_CLKCFG_CTRL - addr of valid reg
|
|
* R1 = CM_CLKEN_PLL - addr dpll ctlr reg
|
|
* R2 = dpll value
|
|
* R3 = CM_IDLEST_CKGEN - addr dpll lock wait
|
|
******************************************************************************/
|
|
.global go_to_speed
|
|
go_to_speed:
|
|
sub sp, sp, #0x4 /* get some stack space */
|
|
str r4, [sp] /* save r4's value */
|
|
|
|
/* move into fast relock bypass */
|
|
ldr r8, pll_ctl_add
|
|
mov r4, #0x2
|
|
str r4, [r8]
|
|
ldr r4, pll_stat
|
|
block:
|
|
ldr r8, [r4] /* wait for bypass to take effect */
|
|
and r8, r8, #0x3
|
|
cmp r8, #0x1
|
|
bne block
|
|
|
|
/* set new dpll dividers _after_ in bypass */
|
|
ldr r4, pll_div_add
|
|
ldr r8, pll_div_val
|
|
str r8, [r4]
|
|
|
|
/* now prepare GPMC (flash) for new dpll speed */
|
|
/* flash needs to be stable when we jump back to it */
|
|
ldr r4, cfg3_0_addr
|
|
ldr r8, cfg3_0_val
|
|
str r8, [r4]
|
|
ldr r4, cfg4_0_addr
|
|
ldr r8, cfg4_0_val
|
|
str r8, [r4]
|
|
ldr r4, cfg1_0_addr
|
|
ldr r8, [r4]
|
|
orr r8, r8, #0x3 /* up gpmc divider */
|
|
str r8, [r4]
|
|
|
|
/* setup to 2x loop though code. The first loop pre-loads the
|
|
* icache, the 2nd commits the prcm config, and locks the dpll
|
|
*/
|
|
mov r4, #0x1000 /* spin spin spin */
|
|
mov r8, #0x4 /* first pass condition & set registers */
|
|
cmp r8, #0x4
|
|
2:
|
|
ldrne r8, [r3] /* DPLL lock check */
|
|
and r8, r8, #0x7
|
|
cmp r8, #0x2
|
|
beq 4f
|
|
3:
|
|
subeq r8, r8, #0x1
|
|
streq r8, [r0] /* commit dividers (2nd time) */
|
|
nop
|
|
lloop1:
|
|
sub r4, r4, #0x1 /* Loop currently necessary else bad jumps */
|
|
nop
|
|
cmp r4, #0x0
|
|
bne lloop1
|
|
mov r4, #0x40000
|
|
cmp r8, #0x1
|
|
nop
|
|
streq r2, [r1] /* lock dpll (2nd time) */
|
|
nop
|
|
lloop2:
|
|
sub r4, r4, #0x1 /* loop currently necessary else bad jumps */
|
|
nop
|
|
cmp r4, #0x0
|
|
bne lloop2
|
|
mov r4, #0x40000
|
|
cmp r8, #0x1
|
|
nop
|
|
ldreq r8, [r3] /* get lock condition for dpll */
|
|
cmp r8, #0x4 /* first time though? */
|
|
bne 2b
|
|
moveq r8, #0x2 /* set to dpll check condition. */
|
|
beq 3b /* if condition not true branch */
|
|
4:
|
|
ldr r4, [sp]
|
|
add sp, sp, #0x4 /* return stack space */
|
|
mov pc, lr /* back to caller, locked */
|
|
|
|
_go_to_speed: .word go_to_speed
|
|
|
|
/* these constants need to be close for PIC code */
|
|
cfg3_0_addr:
|
|
.word GPMC_CONFIG3_0
|
|
cfg3_0_val:
|
|
.word H4_24XX_GPMC_CONFIG3_0
|
|
cfg4_0_addr:
|
|
.word GPMC_CONFIG4_0
|
|
cfg4_0_val:
|
|
.word H4_24XX_GPMC_CONFIG4_0
|
|
cfg1_0_addr:
|
|
.word GPMC_CONFIG1_0
|
|
pll_ctl_add:
|
|
.word CM_CLKEN_PLL
|
|
pll_stat:
|
|
.word CM_IDLEST_CKGEN
|
|
pll_div_add:
|
|
.word CM_CLKSEL1_PLL
|
|
pll_div_val:
|
|
.word DPLL_VAL /* DPLL setting (300MHz default) */
|
|
|
|
.globl lowlevel_init
|
|
lowlevel_init:
|
|
ldr sp, SRAM_STACK
|
|
str ip, [sp] /* stash old link register */
|
|
mov ip, lr /* save link reg across call */
|
|
bl s_init /* go setup pll,mux,memory */
|
|
ldr ip, [sp] /* restore save ip */
|
|
mov lr, ip /* restore link reg */
|
|
|
|
/* map interrupt controller */
|
|
ldr r0, VAL_INTH_SETUP
|
|
mcr p15, 0, r0, c15, c2, 4
|
|
|
|
/* back to arch calling code */
|
|
mov pc, lr
|
|
|
|
/* the literal pools origin */
|
|
.ltorg
|
|
|
|
REG_CONTROL_STATUS:
|
|
.word CONTROL_STATUS
|
|
VAL_INTH_SETUP:
|
|
.word PERIFERAL_PORT_BASE
|
|
SRAM_STACK:
|
|
.word LOW_LEVEL_SRAM_STACK
|
|
|