upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
212 lines
6.7 KiB
212 lines
6.7 KiB
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* From Coreboot src/southbridge/intel/bd82x6x/me_status.c
|
|
*
|
|
* Copyright (C) 2011 The Chromium OS Authors. All rights reserved.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/arch/me.h>
|
|
|
|
/* HFS1[3:0] Current Working State Values */
|
|
static const char *const me_cws_values[] = {
|
|
[ME_HFS_CWS_RESET] = "Reset",
|
|
[ME_HFS_CWS_INIT] = "Initializing",
|
|
[ME_HFS_CWS_REC] = "Recovery",
|
|
[ME_HFS_CWS_NORMAL] = "Normal",
|
|
[ME_HFS_CWS_WAIT] = "Platform Disable Wait",
|
|
[ME_HFS_CWS_TRANS] = "OP State Transition",
|
|
[ME_HFS_CWS_INVALID] = "Invalid CPU Plugged In"
|
|
};
|
|
|
|
/* HFS1[8:6] Current Operation State Values */
|
|
static const char *const me_opstate_values[] = {
|
|
[ME_HFS_STATE_PREBOOT] = "Preboot",
|
|
[ME_HFS_STATE_M0_UMA] = "M0 with UMA",
|
|
[ME_HFS_STATE_M3] = "M3 without UMA",
|
|
[ME_HFS_STATE_M0] = "M0 without UMA",
|
|
[ME_HFS_STATE_BRINGUP] = "Bring up",
|
|
[ME_HFS_STATE_ERROR] = "M0 without UMA but with error"
|
|
};
|
|
|
|
/* HFS[19:16] Current Operation Mode Values */
|
|
static const char *const me_opmode_values[] = {
|
|
[ME_HFS_MODE_NORMAL] = "Normal",
|
|
[ME_HFS_MODE_DEBUG] = "Debug",
|
|
[ME_HFS_MODE_DIS] = "Soft Temporary Disable",
|
|
[ME_HFS_MODE_OVER_JMPR] = "Security Override via Jumper",
|
|
[ME_HFS_MODE_OVER_MEI] = "Security Override via MEI Message"
|
|
};
|
|
|
|
/* HFS[15:12] Error Code Values */
|
|
static const char *const me_error_values[] = {
|
|
[ME_HFS_ERROR_NONE] = "No Error",
|
|
[ME_HFS_ERROR_UNCAT] = "Uncategorized Failure",
|
|
[ME_HFS_ERROR_IMAGE] = "Image Failure",
|
|
[ME_HFS_ERROR_DEBUG] = "Debug Failure"
|
|
};
|
|
|
|
/* GMES[31:28] ME Progress Code */
|
|
static const char *const me_progress_values[] = {
|
|
[ME_GMES_PHASE_ROM] = "ROM Phase",
|
|
[ME_GMES_PHASE_BUP] = "BUP Phase",
|
|
[ME_GMES_PHASE_UKERNEL] = "uKernel Phase",
|
|
[ME_GMES_PHASE_POLICY] = "Policy Module",
|
|
[ME_GMES_PHASE_MODULE] = "Module Loading",
|
|
[ME_GMES_PHASE_UNKNOWN] = "Unknown",
|
|
[ME_GMES_PHASE_HOST] = "Host Communication"
|
|
};
|
|
|
|
/* GMES[27:24] Power Management Event */
|
|
static const char *const me_pmevent_values[] = {
|
|
[0x00] = "Clean Moff->Mx wake",
|
|
[0x01] = "Moff->Mx wake after an error",
|
|
[0x02] = "Clean global reset",
|
|
[0x03] = "Global reset after an error",
|
|
[0x04] = "Clean Intel ME reset",
|
|
[0x05] = "Intel ME reset due to exception",
|
|
[0x06] = "Pseudo-global reset",
|
|
[0x07] = "S0/M0->Sx/M3",
|
|
[0x08] = "Sx/M3->S0/M0",
|
|
[0x09] = "Non-power cycle reset",
|
|
[0x0a] = "Power cycle reset through M3",
|
|
[0x0b] = "Power cycle reset through Moff",
|
|
[0x0c] = "Sx/Mx->Sx/Moff"
|
|
};
|
|
|
|
/* Progress Code 0 states */
|
|
static const char *const me_progress_rom_values[] = {
|
|
[0x00] = "BEGIN",
|
|
[0x06] = "DISABLE"
|
|
};
|
|
|
|
/* Progress Code 1 states */
|
|
static const char *const me_progress_bup_values[] = {
|
|
[0x00] = "Initialization starts",
|
|
[0x01] = "Disable the host wake event",
|
|
[0x04] = "Flow determination start process",
|
|
[0x08] = "Error reading/matching the VSCC table in the descriptor",
|
|
[0x0a] = "Check to see if straps say ME DISABLED",
|
|
[0x0b] = "Timeout waiting for PWROK",
|
|
[0x0d] = "Possibly handle BUP manufacturing override strap",
|
|
[0x11] = "Bringup in M3",
|
|
[0x12] = "Bringup in M0",
|
|
[0x13] = "Flow detection error",
|
|
[0x15] = "M3 clock switching error",
|
|
[0x18] = "M3 kernel load",
|
|
[0x1c] = "T34 missing - cannot program ICC",
|
|
[0x1f] = "Waiting for DID BIOS message",
|
|
[0x20] = "Waiting for DID BIOS message failure",
|
|
[0x21] = "DID reported an error",
|
|
[0x22] = "Enabling UMA",
|
|
[0x23] = "Enabling UMA error",
|
|
[0x24] = "Sending DID Ack to BIOS",
|
|
[0x25] = "Sending DID Ack to BIOS error",
|
|
[0x26] = "Switching clocks in M0",
|
|
[0x27] = "Switching clocks in M0 error",
|
|
[0x28] = "ME in temp disable",
|
|
[0x32] = "M0 kernel load",
|
|
};
|
|
|
|
/* Progress Code 3 states */
|
|
static const char *const me_progress_policy_values[] = {
|
|
[0x00] = "Entery into Policy Module",
|
|
[0x03] = "Received S3 entry",
|
|
[0x04] = "Received S4 entry",
|
|
[0x05] = "Received S5 entry",
|
|
[0x06] = "Received UPD entry",
|
|
[0x07] = "Received PCR entry",
|
|
[0x08] = "Received NPCR entry",
|
|
[0x09] = "Received host wake",
|
|
[0x0a] = "Received AC<>DC switch",
|
|
[0x0b] = "Received DRAM Init Done",
|
|
[0x0c] = "VSCC Data not found for flash device",
|
|
[0x0d] = "VSCC Table is not valid",
|
|
[0x0e] = "Flash Partition Boundary is outside address space",
|
|
[0x0f] = "ME cannot access the chipset descriptor region",
|
|
[0x10] = "Required VSCC values for flash parts do not match",
|
|
};
|
|
|
|
|
|
/**
|
|
* _intel_me_status() - Check Intel Management Engine status
|
|
*
|
|
* struct hfs: Firmware status
|
|
* struct gmes: Management engine status
|
|
*/
|
|
static void _intel_me_status(struct me_hfs *hfs, struct me_gmes *gmes)
|
|
{
|
|
/* Check Current States */
|
|
debug("ME: FW Partition Table : %s\n",
|
|
hfs->fpt_bad ? "BAD" : "OK");
|
|
debug("ME: Bringup Loader Failure : %s\n",
|
|
hfs->ft_bup_ld_flr ? "YES" : "NO");
|
|
debug("ME: Firmware Init Complete : %s\n",
|
|
hfs->fw_init_complete ? "YES" : "NO");
|
|
debug("ME: Manufacturing Mode : %s\n",
|
|
hfs->mfg_mode ? "YES" : "NO");
|
|
debug("ME: Boot Options Present : %s\n",
|
|
hfs->boot_options_present ? "YES" : "NO");
|
|
debug("ME: Update In Progress : %s\n",
|
|
hfs->update_in_progress ? "YES" : "NO");
|
|
debug("ME: Current Working State : %s\n",
|
|
me_cws_values[hfs->working_state]);
|
|
debug("ME: Current Operation State : %s\n",
|
|
me_opstate_values[hfs->operation_state]);
|
|
debug("ME: Current Operation Mode : %s\n",
|
|
me_opmode_values[hfs->operation_mode]);
|
|
debug("ME: Error Code : %s\n",
|
|
me_error_values[hfs->error_code]);
|
|
debug("ME: Progress Phase : %s\n",
|
|
me_progress_values[gmes->progress_code]);
|
|
debug("ME: Power Management Event : %s\n",
|
|
me_pmevent_values[gmes->current_pmevent]);
|
|
|
|
debug("ME: Progress Phase State : ");
|
|
switch (gmes->progress_code) {
|
|
case ME_GMES_PHASE_ROM: /* ROM Phase */
|
|
debug("%s", me_progress_rom_values[gmes->current_state]);
|
|
break;
|
|
|
|
case ME_GMES_PHASE_BUP: /* Bringup Phase */
|
|
if (gmes->current_state < ARRAY_SIZE(me_progress_bup_values) &&
|
|
me_progress_bup_values[gmes->current_state])
|
|
debug("%s",
|
|
me_progress_bup_values[gmes->current_state]);
|
|
else
|
|
debug("0x%02x", gmes->current_state);
|
|
break;
|
|
|
|
case ME_GMES_PHASE_POLICY: /* Policy Module Phase */
|
|
if (gmes->current_state <
|
|
ARRAY_SIZE(me_progress_policy_values) &&
|
|
me_progress_policy_values[gmes->current_state])
|
|
debug("%s",
|
|
me_progress_policy_values[gmes->current_state]);
|
|
else
|
|
debug("0x%02x", gmes->current_state);
|
|
break;
|
|
|
|
case ME_GMES_PHASE_HOST: /* Host Communication Phase */
|
|
if (!gmes->current_state)
|
|
debug("Host communication established");
|
|
else
|
|
debug("0x%02x", gmes->current_state);
|
|
break;
|
|
|
|
default:
|
|
debug("Unknown 0x%02x", gmes->current_state);
|
|
}
|
|
debug("\n");
|
|
}
|
|
|
|
void intel_me_status(struct udevice *me_dev)
|
|
{
|
|
struct me_hfs hfs;
|
|
struct me_gmes gmes;
|
|
|
|
pci_read_dword_ptr(me_dev, &hfs, PCI_ME_HFS);
|
|
pci_read_dword_ptr(me_dev, &gmes, PCI_ME_GMES);
|
|
|
|
_intel_me_status(&hfs, &gmes);
|
|
}
|
|
|