upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
570 lines
14 KiB
570 lines
14 KiB
/*
|
|
* (C) Copyright 2009 SAMSUNG Electronics
|
|
* Minkyu Kang <mk7.kang@samsung.com>
|
|
* Jaehoon Chung <jh80.chung@samsung.com>
|
|
* Portions Copyright 2011 NVIDIA Corporation
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <mmc.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/clk_rst.h>
|
|
#include <asm/arch/clock.h>
|
|
#include "tegra2_mmc.h"
|
|
|
|
/* support 4 mmc hosts */
|
|
struct mmc mmc_dev[4];
|
|
struct mmc_host mmc_host[4];
|
|
|
|
|
|
/**
|
|
* Get the host address and peripheral ID for a device. Devices are numbered
|
|
* from 0 to 3.
|
|
*
|
|
* @param host Structure to fill in (base, reg, mmc_id)
|
|
* @param dev_index Device index (0-3)
|
|
*/
|
|
static void tegra2_get_setup(struct mmc_host *host, int dev_index)
|
|
{
|
|
debug("tegra2_get_base_mmc: dev_index = %d\n", dev_index);
|
|
|
|
switch (dev_index) {
|
|
case 1:
|
|
host->base = TEGRA2_SDMMC3_BASE;
|
|
host->mmc_id = PERIPH_ID_SDMMC3;
|
|
break;
|
|
case 2:
|
|
host->base = TEGRA2_SDMMC2_BASE;
|
|
host->mmc_id = PERIPH_ID_SDMMC2;
|
|
break;
|
|
case 3:
|
|
host->base = TEGRA2_SDMMC1_BASE;
|
|
host->mmc_id = PERIPH_ID_SDMMC1;
|
|
break;
|
|
case 0:
|
|
default:
|
|
host->base = TEGRA2_SDMMC4_BASE;
|
|
host->mmc_id = PERIPH_ID_SDMMC4;
|
|
break;
|
|
}
|
|
|
|
host->reg = (struct tegra2_mmc *)host->base;
|
|
}
|
|
|
|
static void mmc_prepare_data(struct mmc_host *host, struct mmc_data *data)
|
|
{
|
|
unsigned char ctrl;
|
|
|
|
debug("data->dest: %08X, data->blocks: %u, data->blocksize: %u\n",
|
|
(u32)data->dest, data->blocks, data->blocksize);
|
|
|
|
writel((u32)data->dest, &host->reg->sysad);
|
|
/*
|
|
* DMASEL[4:3]
|
|
* 00 = Selects SDMA
|
|
* 01 = Reserved
|
|
* 10 = Selects 32-bit Address ADMA2
|
|
* 11 = Selects 64-bit Address ADMA2
|
|
*/
|
|
ctrl = readb(&host->reg->hostctl);
|
|
ctrl &= ~TEGRA_MMC_HOSTCTL_DMASEL_MASK;
|
|
ctrl |= TEGRA_MMC_HOSTCTL_DMASEL_SDMA;
|
|
writeb(ctrl, &host->reg->hostctl);
|
|
|
|
/* We do not handle DMA boundaries, so set it to max (512 KiB) */
|
|
writew((7 << 12) | (data->blocksize & 0xFFF), &host->reg->blksize);
|
|
writew(data->blocks, &host->reg->blkcnt);
|
|
}
|
|
|
|
static void mmc_set_transfer_mode(struct mmc_host *host, struct mmc_data *data)
|
|
{
|
|
unsigned short mode;
|
|
debug(" mmc_set_transfer_mode called\n");
|
|
/*
|
|
* TRNMOD
|
|
* MUL1SIN0[5] : Multi/Single Block Select
|
|
* RD1WT0[4] : Data Transfer Direction Select
|
|
* 1 = read
|
|
* 0 = write
|
|
* ENACMD12[2] : Auto CMD12 Enable
|
|
* ENBLKCNT[1] : Block Count Enable
|
|
* ENDMA[0] : DMA Enable
|
|
*/
|
|
mode = (TEGRA_MMC_TRNMOD_DMA_ENABLE |
|
|
TEGRA_MMC_TRNMOD_BLOCK_COUNT_ENABLE);
|
|
|
|
if (data->blocks > 1)
|
|
mode |= TEGRA_MMC_TRNMOD_MULTI_BLOCK_SELECT;
|
|
|
|
if (data->flags & MMC_DATA_READ)
|
|
mode |= TEGRA_MMC_TRNMOD_DATA_XFER_DIR_SEL_READ;
|
|
|
|
if (data->flags & MMC_DATA_WRITE) {
|
|
if ((uintptr_t)data->src & (ARCH_DMA_MINALIGN - 1))
|
|
printf("Warning: unaligned write to %p may fail\n",
|
|
data->src);
|
|
flush_dcache_range((ulong)data->src, (ulong)data->src +
|
|
data->blocks * data->blocksize);
|
|
}
|
|
|
|
writew(mode, &host->reg->trnmod);
|
|
}
|
|
|
|
static int mmc_wait_inhibit(struct mmc_host *host,
|
|
struct mmc_cmd *cmd,
|
|
struct mmc_data *data,
|
|
unsigned int timeout)
|
|
{
|
|
/*
|
|
* PRNSTS
|
|
* CMDINHDAT[1] : Command Inhibit (DAT)
|
|
* CMDINHCMD[0] : Command Inhibit (CMD)
|
|
*/
|
|
unsigned int mask = TEGRA_MMC_PRNSTS_CMD_INHIBIT_CMD;
|
|
|
|
/*
|
|
* We shouldn't wait for data inhibit for stop commands, even
|
|
* though they might use busy signaling
|
|
*/
|
|
if ((data == NULL) && (cmd->resp_type & MMC_RSP_BUSY))
|
|
mask |= TEGRA_MMC_PRNSTS_CMD_INHIBIT_DAT;
|
|
|
|
while (readl(&host->reg->prnsts) & mask) {
|
|
if (timeout == 0) {
|
|
printf("%s: timeout error\n", __func__);
|
|
return -1;
|
|
}
|
|
timeout--;
|
|
udelay(1000);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
|
|
struct mmc_data *data)
|
|
{
|
|
struct mmc_host *host = (struct mmc_host *)mmc->priv;
|
|
int flags, i;
|
|
int result;
|
|
unsigned int mask = 0;
|
|
unsigned int retry = 0x100000;
|
|
debug(" mmc_send_cmd called\n");
|
|
|
|
result = mmc_wait_inhibit(host, cmd, data, 10 /* ms */);
|
|
|
|
if (result < 0)
|
|
return result;
|
|
|
|
if (data)
|
|
mmc_prepare_data(host, data);
|
|
|
|
debug("cmd->arg: %08x\n", cmd->cmdarg);
|
|
writel(cmd->cmdarg, &host->reg->argument);
|
|
|
|
if (data)
|
|
mmc_set_transfer_mode(host, data);
|
|
|
|
if ((cmd->resp_type & MMC_RSP_136) && (cmd->resp_type & MMC_RSP_BUSY))
|
|
return -1;
|
|
|
|
/*
|
|
* CMDREG
|
|
* CMDIDX[13:8] : Command index
|
|
* DATAPRNT[5] : Data Present Select
|
|
* ENCMDIDX[4] : Command Index Check Enable
|
|
* ENCMDCRC[3] : Command CRC Check Enable
|
|
* RSPTYP[1:0]
|
|
* 00 = No Response
|
|
* 01 = Length 136
|
|
* 10 = Length 48
|
|
* 11 = Length 48 Check busy after response
|
|
*/
|
|
if (!(cmd->resp_type & MMC_RSP_PRESENT))
|
|
flags = TEGRA_MMC_CMDREG_RESP_TYPE_SELECT_NO_RESPONSE;
|
|
else if (cmd->resp_type & MMC_RSP_136)
|
|
flags = TEGRA_MMC_CMDREG_RESP_TYPE_SELECT_LENGTH_136;
|
|
else if (cmd->resp_type & MMC_RSP_BUSY)
|
|
flags = TEGRA_MMC_CMDREG_RESP_TYPE_SELECT_LENGTH_48_BUSY;
|
|
else
|
|
flags = TEGRA_MMC_CMDREG_RESP_TYPE_SELECT_LENGTH_48;
|
|
|
|
if (cmd->resp_type & MMC_RSP_CRC)
|
|
flags |= TEGRA_MMC_TRNMOD_CMD_CRC_CHECK;
|
|
if (cmd->resp_type & MMC_RSP_OPCODE)
|
|
flags |= TEGRA_MMC_TRNMOD_CMD_INDEX_CHECK;
|
|
if (data)
|
|
flags |= TEGRA_MMC_TRNMOD_DATA_PRESENT_SELECT_DATA_TRANSFER;
|
|
|
|
debug("cmd: %d\n", cmd->cmdidx);
|
|
|
|
writew((cmd->cmdidx << 8) | flags, &host->reg->cmdreg);
|
|
|
|
for (i = 0; i < retry; i++) {
|
|
mask = readl(&host->reg->norintsts);
|
|
/* Command Complete */
|
|
if (mask & TEGRA_MMC_NORINTSTS_CMD_COMPLETE) {
|
|
if (!data)
|
|
writel(mask, &host->reg->norintsts);
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (i == retry) {
|
|
printf("%s: waiting for status update\n", __func__);
|
|
writel(mask, &host->reg->norintsts);
|
|
return TIMEOUT;
|
|
}
|
|
|
|
if (mask & TEGRA_MMC_NORINTSTS_CMD_TIMEOUT) {
|
|
/* Timeout Error */
|
|
debug("timeout: %08x cmd %d\n", mask, cmd->cmdidx);
|
|
writel(mask, &host->reg->norintsts);
|
|
return TIMEOUT;
|
|
} else if (mask & TEGRA_MMC_NORINTSTS_ERR_INTERRUPT) {
|
|
/* Error Interrupt */
|
|
debug("error: %08x cmd %d\n", mask, cmd->cmdidx);
|
|
writel(mask, &host->reg->norintsts);
|
|
return -1;
|
|
}
|
|
|
|
if (cmd->resp_type & MMC_RSP_PRESENT) {
|
|
if (cmd->resp_type & MMC_RSP_136) {
|
|
/* CRC is stripped so we need to do some shifting. */
|
|
for (i = 0; i < 4; i++) {
|
|
unsigned int offset =
|
|
(unsigned int)(&host->reg->rspreg3 - i);
|
|
cmd->response[i] = readl(offset) << 8;
|
|
|
|
if (i != 3) {
|
|
cmd->response[i] |=
|
|
readb(offset - 1);
|
|
}
|
|
debug("cmd->resp[%d]: %08x\n",
|
|
i, cmd->response[i]);
|
|
}
|
|
} else if (cmd->resp_type & MMC_RSP_BUSY) {
|
|
for (i = 0; i < retry; i++) {
|
|
/* PRNTDATA[23:20] : DAT[3:0] Line Signal */
|
|
if (readl(&host->reg->prnsts)
|
|
& (1 << 20)) /* DAT[0] */
|
|
break;
|
|
}
|
|
|
|
if (i == retry) {
|
|
printf("%s: card is still busy\n", __func__);
|
|
writel(mask, &host->reg->norintsts);
|
|
return TIMEOUT;
|
|
}
|
|
|
|
cmd->response[0] = readl(&host->reg->rspreg0);
|
|
debug("cmd->resp[0]: %08x\n", cmd->response[0]);
|
|
} else {
|
|
cmd->response[0] = readl(&host->reg->rspreg0);
|
|
debug("cmd->resp[0]: %08x\n", cmd->response[0]);
|
|
}
|
|
}
|
|
|
|
if (data) {
|
|
unsigned long start = get_timer(0);
|
|
|
|
while (1) {
|
|
mask = readl(&host->reg->norintsts);
|
|
|
|
if (mask & TEGRA_MMC_NORINTSTS_ERR_INTERRUPT) {
|
|
/* Error Interrupt */
|
|
writel(mask, &host->reg->norintsts);
|
|
printf("%s: error during transfer: 0x%08x\n",
|
|
__func__, mask);
|
|
return -1;
|
|
} else if (mask & TEGRA_MMC_NORINTSTS_DMA_INTERRUPT) {
|
|
/*
|
|
* DMA Interrupt, restart the transfer where
|
|
* it was interrupted.
|
|
*/
|
|
unsigned int address = readl(&host->reg->sysad);
|
|
|
|
debug("DMA end\n");
|
|
writel(TEGRA_MMC_NORINTSTS_DMA_INTERRUPT,
|
|
&host->reg->norintsts);
|
|
writel(address, &host->reg->sysad);
|
|
} else if (mask & TEGRA_MMC_NORINTSTS_XFER_COMPLETE) {
|
|
/* Transfer Complete */
|
|
debug("r/w is done\n");
|
|
break;
|
|
} else if (get_timer(start) > 2000UL) {
|
|
writel(mask, &host->reg->norintsts);
|
|
printf("%s: MMC Timeout\n"
|
|
" Interrupt status 0x%08x\n"
|
|
" Interrupt status enable 0x%08x\n"
|
|
" Interrupt signal enable 0x%08x\n"
|
|
" Present status 0x%08x\n",
|
|
__func__, mask,
|
|
readl(&host->reg->norintstsen),
|
|
readl(&host->reg->norintsigen),
|
|
readl(&host->reg->prnsts));
|
|
return -1;
|
|
}
|
|
}
|
|
writel(mask, &host->reg->norintsts);
|
|
if (data->flags & MMC_DATA_READ) {
|
|
if ((uintptr_t)data->dest & (ARCH_DMA_MINALIGN - 1))
|
|
printf("Warning: unaligned read from %p "
|
|
"may fail\n", data->dest);
|
|
invalidate_dcache_range((ulong)data->dest,
|
|
(ulong)data->dest +
|
|
data->blocks * data->blocksize);
|
|
}
|
|
}
|
|
|
|
udelay(1000);
|
|
return 0;
|
|
}
|
|
|
|
static void mmc_change_clock(struct mmc_host *host, uint clock)
|
|
{
|
|
int div;
|
|
unsigned short clk;
|
|
unsigned long timeout;
|
|
|
|
debug(" mmc_change_clock called\n");
|
|
|
|
/*
|
|
* Change Tegra2 SDMMCx clock divisor here. Source is 216MHz,
|
|
* PLLP_OUT0
|
|
*/
|
|
if (clock == 0)
|
|
goto out;
|
|
clock_adjust_periph_pll_div(host->mmc_id, CLOCK_ID_PERIPH, clock,
|
|
&div);
|
|
debug("div = %d\n", div);
|
|
|
|
writew(0, &host->reg->clkcon);
|
|
|
|
/*
|
|
* CLKCON
|
|
* SELFREQ[15:8] : base clock divided by value
|
|
* ENSDCLK[2] : SD Clock Enable
|
|
* STBLINTCLK[1] : Internal Clock Stable
|
|
* ENINTCLK[0] : Internal Clock Enable
|
|
*/
|
|
div >>= 1;
|
|
clk = ((div << TEGRA_MMC_CLKCON_SDCLK_FREQ_SEL_SHIFT) |
|
|
TEGRA_MMC_CLKCON_INTERNAL_CLOCK_ENABLE);
|
|
writew(clk, &host->reg->clkcon);
|
|
|
|
/* Wait max 10 ms */
|
|
timeout = 10;
|
|
while (!(readw(&host->reg->clkcon) &
|
|
TEGRA_MMC_CLKCON_INTERNAL_CLOCK_STABLE)) {
|
|
if (timeout == 0) {
|
|
printf("%s: timeout error\n", __func__);
|
|
return;
|
|
}
|
|
timeout--;
|
|
udelay(1000);
|
|
}
|
|
|
|
clk |= TEGRA_MMC_CLKCON_SD_CLOCK_ENABLE;
|
|
writew(clk, &host->reg->clkcon);
|
|
|
|
debug("mmc_change_clock: clkcon = %08X\n", clk);
|
|
|
|
out:
|
|
host->clock = clock;
|
|
}
|
|
|
|
static void mmc_set_ios(struct mmc *mmc)
|
|
{
|
|
struct mmc_host *host = mmc->priv;
|
|
unsigned char ctrl;
|
|
debug(" mmc_set_ios called\n");
|
|
|
|
debug("bus_width: %x, clock: %d\n", mmc->bus_width, mmc->clock);
|
|
|
|
/* Change clock first */
|
|
mmc_change_clock(host, mmc->clock);
|
|
|
|
ctrl = readb(&host->reg->hostctl);
|
|
|
|
/*
|
|
* WIDE8[5]
|
|
* 0 = Depend on WIDE4
|
|
* 1 = 8-bit mode
|
|
* WIDE4[1]
|
|
* 1 = 4-bit mode
|
|
* 0 = 1-bit mode
|
|
*/
|
|
if (mmc->bus_width == 8)
|
|
ctrl |= (1 << 5);
|
|
else if (mmc->bus_width == 4)
|
|
ctrl |= (1 << 1);
|
|
else
|
|
ctrl &= ~(1 << 1);
|
|
|
|
writeb(ctrl, &host->reg->hostctl);
|
|
debug("mmc_set_ios: hostctl = %08X\n", ctrl);
|
|
}
|
|
|
|
static void mmc_reset(struct mmc_host *host)
|
|
{
|
|
unsigned int timeout;
|
|
debug(" mmc_reset called\n");
|
|
|
|
/*
|
|
* RSTALL[0] : Software reset for all
|
|
* 1 = reset
|
|
* 0 = work
|
|
*/
|
|
writeb(TEGRA_MMC_SWRST_SW_RESET_FOR_ALL, &host->reg->swrst);
|
|
|
|
host->clock = 0;
|
|
|
|
/* Wait max 100 ms */
|
|
timeout = 100;
|
|
|
|
/* hw clears the bit when it's done */
|
|
while (readb(&host->reg->swrst) & TEGRA_MMC_SWRST_SW_RESET_FOR_ALL) {
|
|
if (timeout == 0) {
|
|
printf("%s: timeout error\n", __func__);
|
|
return;
|
|
}
|
|
timeout--;
|
|
udelay(1000);
|
|
}
|
|
}
|
|
|
|
static int mmc_core_init(struct mmc *mmc)
|
|
{
|
|
struct mmc_host *host = (struct mmc_host *)mmc->priv;
|
|
unsigned int mask;
|
|
debug(" mmc_core_init called\n");
|
|
|
|
mmc_reset(host);
|
|
|
|
host->version = readw(&host->reg->hcver);
|
|
debug("host version = %x\n", host->version);
|
|
|
|
/* mask all */
|
|
writel(0xffffffff, &host->reg->norintstsen);
|
|
writel(0xffffffff, &host->reg->norintsigen);
|
|
|
|
writeb(0xe, &host->reg->timeoutcon); /* TMCLK * 2^27 */
|
|
/*
|
|
* NORMAL Interrupt Status Enable Register init
|
|
* [5] ENSTABUFRDRDY : Buffer Read Ready Status Enable
|
|
* [4] ENSTABUFWTRDY : Buffer write Ready Status Enable
|
|
* [3] ENSTADMAINT : DMA boundary interrupt
|
|
* [1] ENSTASTANSCMPLT : Transfre Complete Status Enable
|
|
* [0] ENSTACMDCMPLT : Command Complete Status Enable
|
|
*/
|
|
mask = readl(&host->reg->norintstsen);
|
|
mask &= ~(0xffff);
|
|
mask |= (TEGRA_MMC_NORINTSTSEN_CMD_COMPLETE |
|
|
TEGRA_MMC_NORINTSTSEN_XFER_COMPLETE |
|
|
TEGRA_MMC_NORINTSTSEN_DMA_INTERRUPT |
|
|
TEGRA_MMC_NORINTSTSEN_BUFFER_WRITE_READY |
|
|
TEGRA_MMC_NORINTSTSEN_BUFFER_READ_READY);
|
|
writel(mask, &host->reg->norintstsen);
|
|
|
|
/*
|
|
* NORMAL Interrupt Signal Enable Register init
|
|
* [1] ENSTACMDCMPLT : Transfer Complete Signal Enable
|
|
*/
|
|
mask = readl(&host->reg->norintsigen);
|
|
mask &= ~(0xffff);
|
|
mask |= TEGRA_MMC_NORINTSIGEN_XFER_COMPLETE;
|
|
writel(mask, &host->reg->norintsigen);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int tegra2_mmc_getcd(struct mmc *mmc)
|
|
{
|
|
struct mmc_host *host = (struct mmc_host *)mmc->priv;
|
|
|
|
debug("tegra2_mmc_getcd called\n");
|
|
|
|
if (host->cd_gpio >= 0)
|
|
return !gpio_get_value(host->cd_gpio);
|
|
|
|
return 1;
|
|
}
|
|
|
|
int tegra2_mmc_init(int dev_index, int bus_width, int pwr_gpio, int cd_gpio)
|
|
{
|
|
struct mmc_host *host;
|
|
char gpusage[12]; /* "SD/MMCn PWR" or "SD/MMCn CD" */
|
|
struct mmc *mmc;
|
|
|
|
debug(" tegra2_mmc_init: index %d, bus width %d "
|
|
"pwr_gpio %d cd_gpio %d\n",
|
|
dev_index, bus_width, pwr_gpio, cd_gpio);
|
|
|
|
host = &mmc_host[dev_index];
|
|
|
|
host->clock = 0;
|
|
host->pwr_gpio = pwr_gpio;
|
|
host->cd_gpio = cd_gpio;
|
|
tegra2_get_setup(host, dev_index);
|
|
|
|
clock_start_periph_pll(host->mmc_id, CLOCK_ID_PERIPH, 20000000);
|
|
|
|
if (host->pwr_gpio >= 0) {
|
|
sprintf(gpusage, "SD/MMC%d PWR", dev_index);
|
|
gpio_request(host->pwr_gpio, gpusage);
|
|
gpio_direction_output(host->pwr_gpio, 1);
|
|
}
|
|
|
|
if (host->cd_gpio >= 0) {
|
|
sprintf(gpusage, "SD/MMC%d CD", dev_index);
|
|
gpio_request(host->cd_gpio, gpusage);
|
|
gpio_direction_input(host->cd_gpio);
|
|
}
|
|
|
|
mmc = &mmc_dev[dev_index];
|
|
|
|
sprintf(mmc->name, "Tegra2 SD/MMC");
|
|
mmc->priv = host;
|
|
mmc->send_cmd = mmc_send_cmd;
|
|
mmc->set_ios = mmc_set_ios;
|
|
mmc->init = mmc_core_init;
|
|
mmc->getcd = tegra2_mmc_getcd;
|
|
|
|
mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
|
|
if (bus_width == 8)
|
|
mmc->host_caps = MMC_MODE_8BIT;
|
|
else
|
|
mmc->host_caps = MMC_MODE_4BIT;
|
|
mmc->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS | MMC_MODE_HC;
|
|
|
|
/*
|
|
* min freq is for card identification, and is the highest
|
|
* low-speed SDIO card frequency (actually 400KHz)
|
|
* max freq is highest HS eMMC clock as per the SD/MMC spec
|
|
* (actually 52MHz)
|
|
* Both of these are the closest equivalents w/216MHz source
|
|
* clock and Tegra2 SDMMC divisors.
|
|
*/
|
|
mmc->f_min = 375000;
|
|
mmc->f_max = 48000000;
|
|
|
|
mmc_register(mmc);
|
|
|
|
return 0;
|
|
}
|
|
|