upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
210 lines
5.7 KiB
210 lines
5.7 KiB
/*
|
|
* TI serdes driver for keystone2.
|
|
*
|
|
* (C) Copyright 2014
|
|
* Texas Instruments Incorporated, <www.ti.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <errno.h>
|
|
#include <common.h>
|
|
#include <asm/ti-common/keystone_serdes.h>
|
|
|
|
#define SERDES_CMU_REGS(x) (0x0000 + (0x0c00 * (x)))
|
|
#define SERDES_LANE_REGS(x) (0x0200 + (0x200 * (x)))
|
|
#define SERDES_COMLANE_REGS 0x0a00
|
|
#define SERDES_WIZ_REGS 0x1fc0
|
|
|
|
#define SERDES_CMU_REG_000(x) (SERDES_CMU_REGS(x) + 0x000)
|
|
#define SERDES_CMU_REG_010(x) (SERDES_CMU_REGS(x) + 0x010)
|
|
#define SERDES_COMLANE_REG_000 (SERDES_COMLANE_REGS + 0x000)
|
|
#define SERDES_LANE_REG_000(x) (SERDES_LANE_REGS(x) + 0x000)
|
|
#define SERDES_LANE_REG_028(x) (SERDES_LANE_REGS(x) + 0x028)
|
|
#define SERDES_LANE_CTL_STATUS_REG(x) (SERDES_WIZ_REGS + 0x0020 + (4 * (x)))
|
|
#define SERDES_PLL_CTL_REG (SERDES_WIZ_REGS + 0x0034)
|
|
|
|
#define SERDES_RESET BIT(28)
|
|
#define SERDES_LANE_RESET BIT(29)
|
|
#define SERDES_LANE_LOOPBACK BIT(30)
|
|
#define SERDES_LANE_EN_VAL(x, y, z) (x[y] | (z << 26) | (z << 10))
|
|
|
|
#define SERDES_CMU_CFG_NUM 5
|
|
#define SERDES_COMLANE_CFG_NUM 10
|
|
#define SERDES_LANE_CFG_NUM 10
|
|
|
|
struct serdes_cfg {
|
|
u32 ofs;
|
|
u32 val;
|
|
u32 mask;
|
|
};
|
|
|
|
struct cfg_entry {
|
|
enum ks2_serdes_clock clk;
|
|
enum ks2_serdes_rate rate;
|
|
struct serdes_cfg cmu[SERDES_CMU_CFG_NUM];
|
|
struct serdes_cfg comlane[SERDES_COMLANE_CFG_NUM];
|
|
struct serdes_cfg lane[SERDES_LANE_CFG_NUM];
|
|
};
|
|
|
|
/* SERDES PHY lane enable configuration value, indexed by PHY interface */
|
|
static u32 serdes_cfg_lane_enable[] = {
|
|
0xf000f0c0, /* SGMII */
|
|
0xf0e9f038, /* PCSR */
|
|
};
|
|
|
|
/* SERDES PHY PLL enable configuration value, indexed by PHY interface */
|
|
static u32 serdes_cfg_pll_enable[] = {
|
|
0xe0000000, /* SGMII */
|
|
0xee000000, /* PCSR */
|
|
};
|
|
|
|
/**
|
|
* Array to hold all possible serdes configurations.
|
|
* Combination for 5 clock settings and 6 baud rates.
|
|
*/
|
|
static struct cfg_entry cfgs[] = {
|
|
{
|
|
.clk = SERDES_CLOCK_156P25M,
|
|
.rate = SERDES_RATE_5G,
|
|
.cmu = {
|
|
{0x0000, 0x00800000, 0xffff0000},
|
|
{0x0014, 0x00008282, 0x0000ffff},
|
|
{0x0060, 0x00142438, 0x00ffffff},
|
|
{0x0064, 0x00c3c700, 0x00ffff00},
|
|
{0x0078, 0x0000c000, 0x0000ff00}
|
|
},
|
|
.comlane = {
|
|
{0x0a00, 0x00000800, 0x0000ff00},
|
|
{0x0a08, 0x38a20000, 0xffff0000},
|
|
{0x0a30, 0x008a8a00, 0x00ffff00},
|
|
{0x0a84, 0x00000600, 0x0000ff00},
|
|
{0x0a94, 0x10000000, 0xff000000},
|
|
{0x0aa0, 0x81000000, 0xff000000},
|
|
{0x0abc, 0xff000000, 0xff000000},
|
|
{0x0ac0, 0x0000008b, 0x000000ff},
|
|
{0x0b08, 0x583f0000, 0xffff0000},
|
|
{0x0b0c, 0x0000004e, 0x000000ff}
|
|
},
|
|
.lane = {
|
|
{0x0004, 0x38000080, 0xff0000ff},
|
|
{0x0008, 0x00000000, 0x000000ff},
|
|
{0x000c, 0x02000000, 0xff000000},
|
|
{0x0010, 0x1b000000, 0xff000000},
|
|
{0x0014, 0x00006fb8, 0x0000ffff},
|
|
{0x0018, 0x758000e4, 0xffff00ff},
|
|
{0x00ac, 0x00004400, 0x0000ff00},
|
|
{0x002c, 0x00100800, 0x00ffff00},
|
|
{0x0080, 0x00820082, 0x00ff00ff},
|
|
{0x0084, 0x1d0f0385, 0xffffffff}
|
|
},
|
|
},
|
|
};
|
|
|
|
static inline void ks2_serdes_rmw(u32 addr, u32 value, u32 mask)
|
|
{
|
|
writel(((readl(addr) & (~mask)) | (value & mask)), addr);
|
|
}
|
|
|
|
static void ks2_serdes_cfg_setup(u32 base, struct serdes_cfg *cfg, u32 size)
|
|
{
|
|
u32 i;
|
|
|
|
for (i = 0; i < size; i++)
|
|
ks2_serdes_rmw(base + cfg[i].ofs, cfg[i].val, cfg[i].mask);
|
|
}
|
|
|
|
static void ks2_serdes_lane_config(u32 base, struct serdes_cfg *cfg_lane,
|
|
u32 size, u32 lane)
|
|
{
|
|
u32 i;
|
|
|
|
for (i = 0; i < size; i++)
|
|
ks2_serdes_rmw(base + cfg_lane[i].ofs + SERDES_LANE_REGS(lane),
|
|
cfg_lane[i].val, cfg_lane[i].mask);
|
|
}
|
|
|
|
static int ks2_serdes_init_cfg(u32 base, struct cfg_entry *cfg, u32 num_lanes)
|
|
{
|
|
u32 i;
|
|
|
|
ks2_serdes_cfg_setup(base, cfg->cmu, SERDES_CMU_CFG_NUM);
|
|
ks2_serdes_cfg_setup(base, cfg->comlane, SERDES_COMLANE_CFG_NUM);
|
|
|
|
for (i = 0; i < num_lanes; i++)
|
|
ks2_serdes_lane_config(base, cfg->lane, SERDES_LANE_CFG_NUM, i);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ks2_serdes_cmu_comlane_enable(u32 base, struct ks2_serdes *serdes)
|
|
{
|
|
/* Bring SerDes out of Reset */
|
|
ks2_serdes_rmw(base + SERDES_CMU_REG_010(0), 0x0, SERDES_RESET);
|
|
if (serdes->intf == SERDES_PHY_PCSR)
|
|
ks2_serdes_rmw(base + SERDES_CMU_REG_010(1), 0x0, SERDES_RESET);
|
|
|
|
/* Enable CMU and COMLANE */
|
|
ks2_serdes_rmw(base + SERDES_CMU_REG_000(0), 0x03, 0x000000ff);
|
|
if (serdes->intf == SERDES_PHY_PCSR)
|
|
ks2_serdes_rmw(base + SERDES_CMU_REG_000(1), 0x03, 0x000000ff);
|
|
|
|
ks2_serdes_rmw(base + SERDES_COMLANE_REG_000, 0x5f, 0x000000ff);
|
|
}
|
|
|
|
static void ks2_serdes_pll_enable(u32 base, struct ks2_serdes *serdes)
|
|
{
|
|
writel(serdes_cfg_pll_enable[serdes->intf],
|
|
base + SERDES_PLL_CTL_REG);
|
|
}
|
|
|
|
static void ks2_serdes_lane_reset(u32 base, u32 reset, u32 lane)
|
|
{
|
|
if (reset)
|
|
ks2_serdes_rmw(base + SERDES_LANE_REG_028(lane),
|
|
0x1, SERDES_LANE_RESET);
|
|
else
|
|
ks2_serdes_rmw(base + SERDES_LANE_REG_028(lane),
|
|
0x0, SERDES_LANE_RESET);
|
|
}
|
|
|
|
static void ks2_serdes_lane_enable(u32 base,
|
|
struct ks2_serdes *serdes, u32 lane)
|
|
{
|
|
/* Bring lane out of reset */
|
|
ks2_serdes_lane_reset(base, 0, lane);
|
|
|
|
writel(SERDES_LANE_EN_VAL(serdes_cfg_lane_enable, serdes->intf,
|
|
serdes->rate_mode),
|
|
base + SERDES_LANE_CTL_STATUS_REG(lane));
|
|
|
|
/* Set NES bit if Loopback Enabled */
|
|
if (serdes->loopback)
|
|
ks2_serdes_rmw(base + SERDES_LANE_REG_000(lane),
|
|
0x1, SERDES_LANE_LOOPBACK);
|
|
}
|
|
|
|
int ks2_serdes_init(u32 base, struct ks2_serdes *serdes, u32 num_lanes)
|
|
{
|
|
int i;
|
|
int ret = 0;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(cfgs); i++)
|
|
if (serdes->clk == cfgs[i].clk && serdes->rate == cfgs[i].rate)
|
|
break;
|
|
|
|
if (i >= ARRAY_SIZE(cfgs)) {
|
|
puts("Cannot find keystone SerDes configuration");
|
|
return -EINVAL;
|
|
}
|
|
|
|
ks2_serdes_init_cfg(base, &cfgs[i], num_lanes);
|
|
|
|
ks2_serdes_cmu_comlane_enable(base, serdes);
|
|
for (i = 0; i < num_lanes; i++)
|
|
ks2_serdes_lane_enable(base, serdes, i);
|
|
|
|
ks2_serdes_pll_enable(base, serdes);
|
|
|
|
return ret;
|
|
}
|
|
|