upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
1085 lines
26 KiB
1085 lines
26 KiB
/*
|
|
* (C) Copyright 2000-2006
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <watchdog.h>
|
|
#include <command.h>
|
|
#include <malloc.h>
|
|
#include <stdio_dev.h>
|
|
#ifdef CONFIG_8xx
|
|
#include <mpc8xx.h>
|
|
#endif
|
|
#ifdef CONFIG_5xx
|
|
#include <mpc5xx.h>
|
|
#endif
|
|
#ifdef CONFIG_MPC5xxx
|
|
#include <mpc5xxx.h>
|
|
#endif
|
|
#if defined(CONFIG_CMD_IDE)
|
|
#include <ide.h>
|
|
#endif
|
|
#if defined(CONFIG_CMD_SCSI)
|
|
#include <scsi.h>
|
|
#endif
|
|
#if defined(CONFIG_CMD_KGDB)
|
|
#include <kgdb.h>
|
|
#endif
|
|
#ifdef CONFIG_STATUS_LED
|
|
#include <status_led.h>
|
|
#endif
|
|
#include <net.h>
|
|
#ifdef CONFIG_GENERIC_MMC
|
|
#include <mmc.h>
|
|
#endif
|
|
#include <serial.h>
|
|
#ifdef CONFIG_SYS_ALLOC_DPRAM
|
|
#if !defined(CONFIG_CPM2)
|
|
#include <commproc.h>
|
|
#endif
|
|
#endif
|
|
#include <version.h>
|
|
#if defined(CONFIG_BAB7xx)
|
|
#include <w83c553f.h>
|
|
#endif
|
|
#include <dtt.h>
|
|
#if defined(CONFIG_POST)
|
|
#include <post.h>
|
|
#endif
|
|
#if defined(CONFIG_LOGBUFFER)
|
|
#include <logbuff.h>
|
|
#endif
|
|
#if defined(CONFIG_SYS_INIT_RAM_LOCK) && defined(CONFIG_E500)
|
|
#include <asm/cache.h>
|
|
#endif
|
|
#ifdef CONFIG_PS2KBD
|
|
#include <keyboard.h>
|
|
#endif
|
|
|
|
#ifdef CONFIG_ADDR_MAP
|
|
#include <asm/mmu.h>
|
|
#endif
|
|
|
|
#ifdef CONFIG_MP
|
|
#include <asm/mp.h>
|
|
#endif
|
|
|
|
#ifdef CONFIG_BITBANGMII
|
|
#include <miiphy.h>
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_UPDATE_FLASH_SIZE
|
|
extern int update_flash_size (int flash_size);
|
|
#endif
|
|
|
|
#if defined(CONFIG_SC3)
|
|
extern void sc3_read_eeprom(void);
|
|
#endif
|
|
|
|
#if defined(CONFIG_CMD_DOC)
|
|
void doc_init (void);
|
|
#endif
|
|
#if defined(CONFIG_HARD_I2C) || \
|
|
defined(CONFIG_SOFT_I2C)
|
|
#include <i2c.h>
|
|
#endif
|
|
#include <spi.h>
|
|
#include <nand.h>
|
|
|
|
static char *failed = "*** failed ***\n";
|
|
|
|
#if defined(CONFIG_OXC) || defined(CONFIG_PCU_E) || defined(CONFIG_RMU)
|
|
extern flash_info_t flash_info[];
|
|
#endif
|
|
|
|
#if defined(CONFIG_START_IDE)
|
|
extern int board_start_ide(void);
|
|
#endif
|
|
#include <environment.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#if defined(CONFIG_ENV_IS_EMBEDDED)
|
|
#define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN
|
|
#elif ( ((CONFIG_ENV_ADDR+CONFIG_ENV_SIZE) < CONFIG_SYS_MONITOR_BASE) || \
|
|
(CONFIG_ENV_ADDR >= (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)) ) || \
|
|
defined(CONFIG_ENV_IS_IN_NVRAM)
|
|
#define TOTAL_MALLOC_LEN (CONFIG_SYS_MALLOC_LEN + CONFIG_ENV_SIZE)
|
|
#else
|
|
#define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN
|
|
#endif
|
|
|
|
#if !defined(CONFIG_SYS_MEM_TOP_HIDE)
|
|
#define CONFIG_SYS_MEM_TOP_HIDE 0
|
|
#endif
|
|
|
|
extern ulong __init_end;
|
|
extern ulong _end;
|
|
ulong monitor_flash_len;
|
|
|
|
#if defined(CONFIG_CMD_BEDBUG)
|
|
#include <bedbug/type.h>
|
|
#endif
|
|
|
|
/************************************************************************
|
|
* Utilities *
|
|
************************************************************************
|
|
*/
|
|
|
|
/*
|
|
* All attempts to come up with a "common" initialization sequence
|
|
* that works for all boards and architectures failed: some of the
|
|
* requirements are just _too_ different. To get rid of the resulting
|
|
* mess of board dependend #ifdef'ed code we now make the whole
|
|
* initialization sequence configurable to the user.
|
|
*
|
|
* The requirements for any new initalization function is simple: it
|
|
* receives a pointer to the "global data" structure as it's only
|
|
* argument, and returns an integer return code, where 0 means
|
|
* "continue" and != 0 means "fatal error, hang the system".
|
|
*/
|
|
typedef int (init_fnc_t) (void);
|
|
|
|
/************************************************************************
|
|
* Init Utilities *
|
|
************************************************************************
|
|
* Some of this code should be moved into the core functions,
|
|
* but let's get it working (again) first...
|
|
*/
|
|
|
|
static int init_baudrate (void)
|
|
{
|
|
char tmp[64]; /* long enough for environment variables */
|
|
int i = getenv_r ("baudrate", tmp, sizeof (tmp));
|
|
|
|
gd->baudrate = (i > 0)
|
|
? (int) simple_strtoul (tmp, NULL, 10)
|
|
: CONFIG_BAUDRATE;
|
|
return (0);
|
|
}
|
|
|
|
/***********************************************************************/
|
|
|
|
void __board_add_ram_info(int use_default)
|
|
{
|
|
/* please define platform specific board_add_ram_info() */
|
|
}
|
|
void board_add_ram_info(int) __attribute__((weak, alias("__board_add_ram_info")));
|
|
|
|
|
|
static int init_func_ram (void)
|
|
{
|
|
#ifdef CONFIG_BOARD_TYPES
|
|
int board_type = gd->board_type;
|
|
#else
|
|
int board_type = 0; /* use dummy arg */
|
|
#endif
|
|
puts ("DRAM: ");
|
|
|
|
if ((gd->ram_size = initdram (board_type)) > 0) {
|
|
print_size (gd->ram_size, "");
|
|
board_add_ram_info(0);
|
|
putc('\n');
|
|
return (0);
|
|
}
|
|
puts (failed);
|
|
return (1);
|
|
}
|
|
|
|
/***********************************************************************/
|
|
|
|
#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
|
|
static int init_func_i2c (void)
|
|
{
|
|
puts ("I2C: ");
|
|
i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
|
|
puts ("ready\n");
|
|
return (0);
|
|
}
|
|
#endif
|
|
|
|
#if defined(CONFIG_HARD_SPI)
|
|
static int init_func_spi (void)
|
|
{
|
|
puts ("SPI: ");
|
|
spi_init ();
|
|
puts ("ready\n");
|
|
return (0);
|
|
}
|
|
#endif
|
|
|
|
/***********************************************************************/
|
|
|
|
#if defined(CONFIG_WATCHDOG)
|
|
static int init_func_watchdog_init (void)
|
|
{
|
|
puts (" Watchdog enabled\n");
|
|
WATCHDOG_RESET ();
|
|
return (0);
|
|
}
|
|
# define INIT_FUNC_WATCHDOG_INIT init_func_watchdog_init,
|
|
|
|
static int init_func_watchdog_reset (void)
|
|
{
|
|
WATCHDOG_RESET ();
|
|
return (0);
|
|
}
|
|
# define INIT_FUNC_WATCHDOG_RESET init_func_watchdog_reset,
|
|
#else
|
|
# define INIT_FUNC_WATCHDOG_INIT /* undef */
|
|
# define INIT_FUNC_WATCHDOG_RESET /* undef */
|
|
#endif /* CONFIG_WATCHDOG */
|
|
|
|
/************************************************************************
|
|
* Initialization sequence *
|
|
************************************************************************
|
|
*/
|
|
|
|
init_fnc_t *init_sequence[] = {
|
|
#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
|
|
probecpu,
|
|
#endif
|
|
#if defined(CONFIG_BOARD_EARLY_INIT_F)
|
|
board_early_init_f,
|
|
#endif
|
|
#if !defined(CONFIG_8xx_CPUCLK_DEFAULT)
|
|
get_clocks, /* get CPU and bus clocks (etc.) */
|
|
#if defined(CONFIG_TQM8xxL) && !defined(CONFIG_TQM866M) \
|
|
&& !defined(CONFIG_TQM885D)
|
|
adjust_sdram_tbs_8xx,
|
|
#endif
|
|
init_timebase,
|
|
#endif
|
|
#ifdef CONFIG_SYS_ALLOC_DPRAM
|
|
#if !defined(CONFIG_CPM2)
|
|
dpram_init,
|
|
#endif
|
|
#endif
|
|
#if defined(CONFIG_BOARD_POSTCLK_INIT)
|
|
board_postclk_init,
|
|
#endif
|
|
env_init,
|
|
#if defined(CONFIG_8xx_CPUCLK_DEFAULT)
|
|
get_clocks_866, /* get CPU and bus clocks according to the environment variable */
|
|
sdram_adjust_866, /* adjust sdram refresh rate according to the new clock */
|
|
init_timebase,
|
|
#endif
|
|
init_baudrate,
|
|
serial_init,
|
|
console_init_f,
|
|
display_options,
|
|
#if defined(CONFIG_8260)
|
|
prt_8260_rsr,
|
|
prt_8260_clks,
|
|
#endif /* CONFIG_8260 */
|
|
#if defined(CONFIG_MPC83xx)
|
|
prt_83xx_rsr,
|
|
#endif
|
|
checkcpu,
|
|
#if defined(CONFIG_MPC5xxx)
|
|
prt_mpc5xxx_clks,
|
|
#endif /* CONFIG_MPC5xxx */
|
|
#if defined(CONFIG_MPC8220)
|
|
prt_mpc8220_clks,
|
|
#endif
|
|
checkboard,
|
|
INIT_FUNC_WATCHDOG_INIT
|
|
#if defined(CONFIG_MISC_INIT_F)
|
|
misc_init_f,
|
|
#endif
|
|
INIT_FUNC_WATCHDOG_RESET
|
|
#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
|
|
init_func_i2c,
|
|
#endif
|
|
#if defined(CONFIG_HARD_SPI)
|
|
init_func_spi,
|
|
#endif
|
|
#ifdef CONFIG_POST
|
|
post_init_f,
|
|
#endif
|
|
INIT_FUNC_WATCHDOG_RESET
|
|
init_func_ram,
|
|
#if defined(CONFIG_SYS_DRAM_TEST)
|
|
testdram,
|
|
#endif /* CONFIG_SYS_DRAM_TEST */
|
|
INIT_FUNC_WATCHDOG_RESET
|
|
|
|
NULL, /* Terminate this list */
|
|
};
|
|
|
|
ulong get_effective_memsize(void)
|
|
{
|
|
#ifndef CONFIG_VERY_BIG_RAM
|
|
return gd->ram_size;
|
|
#else
|
|
/* limit stack to what we can reasonable map */
|
|
return ((gd->ram_size > CONFIG_MAX_MEM_MAPPED) ?
|
|
CONFIG_MAX_MEM_MAPPED : gd->ram_size);
|
|
#endif
|
|
}
|
|
|
|
/************************************************************************
|
|
*
|
|
* This is the first part of the initialization sequence that is
|
|
* implemented in C, but still running from ROM.
|
|
*
|
|
* The main purpose is to provide a (serial) console interface as
|
|
* soon as possible (so we can see any error messages), and to
|
|
* initialize the RAM so that we can relocate the monitor code to
|
|
* RAM.
|
|
*
|
|
* Be aware of the restrictions: global data is read-only, BSS is not
|
|
* initialized, and stack space is limited to a few kB.
|
|
*
|
|
************************************************************************
|
|
*/
|
|
|
|
#ifdef CONFIG_LOGBUFFER
|
|
unsigned long logbuffer_base(void)
|
|
{
|
|
return CONFIG_SYS_SDRAM_BASE + get_effective_memsize() - LOGBUFF_LEN;
|
|
}
|
|
#endif
|
|
|
|
void board_init_f (ulong bootflag)
|
|
{
|
|
bd_t *bd;
|
|
ulong len, addr, addr_sp;
|
|
ulong *s;
|
|
gd_t *id;
|
|
init_fnc_t **init_fnc_ptr;
|
|
#ifdef CONFIG_PRAM
|
|
int i;
|
|
ulong reg;
|
|
uchar tmp[64]; /* long enough for environment variables */
|
|
#endif
|
|
|
|
/* Pointer is writable since we allocated a register for it */
|
|
gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
|
|
/* compiler optimization barrier needed for GCC >= 3.4 */
|
|
__asm__ __volatile__("": : :"memory");
|
|
|
|
#if !defined(CONFIG_CPM2) && !defined(CONFIG_MPC83xx) && \
|
|
!defined(CONFIG_MPC85xx) && !defined(CONFIG_MPC86xx)
|
|
/* Clear initial global data */
|
|
memset ((void *) gd, 0, sizeof (gd_t));
|
|
#endif
|
|
|
|
for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) {
|
|
if ((*init_fnc_ptr) () != 0) {
|
|
hang ();
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Now that we have DRAM mapped and working, we can
|
|
* relocate the code and continue running from DRAM.
|
|
*
|
|
* Reserve memory at end of RAM for (top down in that order):
|
|
* - area that won't get touched by U-Boot and Linux (optional)
|
|
* - kernel log buffer
|
|
* - protected RAM
|
|
* - LCD framebuffer
|
|
* - monitor code
|
|
* - board info struct
|
|
*/
|
|
len = (ulong)&_end - CONFIG_SYS_MONITOR_BASE;
|
|
|
|
/*
|
|
* Subtract specified amount of memory to hide so that it won't
|
|
* get "touched" at all by U-Boot. By fixing up gd->ram_size
|
|
* the Linux kernel should now get passed the now "corrected"
|
|
* memory size and won't touch it either. This should work
|
|
* for arch/ppc and arch/powerpc. Only Linux board ports in
|
|
* arch/powerpc with bootwrapper support, that recalculate the
|
|
* memory size from the SDRAM controller setup will have to
|
|
* get fixed.
|
|
*/
|
|
gd->ram_size -= CONFIG_SYS_MEM_TOP_HIDE;
|
|
|
|
addr = CONFIG_SYS_SDRAM_BASE + get_effective_memsize();
|
|
|
|
#if defined(CONFIG_MP) && (defined(CONFIG_MPC86xx) || defined(CONFIG_E500))
|
|
/*
|
|
* We need to make sure the location we intend to put secondary core
|
|
* boot code is reserved and not used by any part of u-boot
|
|
*/
|
|
if (addr > determine_mp_bootpg()) {
|
|
addr = determine_mp_bootpg();
|
|
debug ("Reserving MP boot page to %08lx\n", addr);
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_LOGBUFFER
|
|
#ifndef CONFIG_ALT_LB_ADDR
|
|
/* reserve kernel log buffer */
|
|
addr -= (LOGBUFF_RESERVE);
|
|
debug ("Reserving %dk for kernel logbuffer at %08lx\n", LOGBUFF_LEN, addr);
|
|
#endif
|
|
#endif
|
|
|
|
#ifdef CONFIG_PRAM
|
|
/*
|
|
* reserve protected RAM
|
|
*/
|
|
i = getenv_r ("pram", (char *)tmp, sizeof (tmp));
|
|
reg = (i > 0) ? simple_strtoul ((const char *)tmp, NULL, 10) : CONFIG_PRAM;
|
|
addr -= (reg << 10); /* size is in kB */
|
|
debug ("Reserving %ldk for protected RAM at %08lx\n", reg, addr);
|
|
#endif /* CONFIG_PRAM */
|
|
|
|
/* round down to next 4 kB limit */
|
|
addr &= ~(4096 - 1);
|
|
debug ("Top of RAM usable for U-Boot at: %08lx\n", addr);
|
|
|
|
#ifdef CONFIG_LCD
|
|
/* reserve memory for LCD display (always full pages) */
|
|
addr = lcd_setmem (addr);
|
|
gd->fb_base = addr;
|
|
#endif /* CONFIG_LCD */
|
|
|
|
#if defined(CONFIG_VIDEO) && defined(CONFIG_8xx)
|
|
/* reserve memory for video display (always full pages) */
|
|
addr = video_setmem (addr);
|
|
gd->fb_base = addr;
|
|
#endif /* CONFIG_VIDEO */
|
|
|
|
/*
|
|
* reserve memory for U-Boot code, data & bss
|
|
* round down to next 4 kB limit
|
|
*/
|
|
addr -= len;
|
|
addr &= ~(4096 - 1);
|
|
#ifdef CONFIG_E500
|
|
/* round down to next 64 kB limit so that IVPR stays aligned */
|
|
addr &= ~(65536 - 1);
|
|
#endif
|
|
|
|
debug ("Reserving %ldk for U-Boot at: %08lx\n", len >> 10, addr);
|
|
|
|
#ifdef CONFIG_AMIGAONEG3SE
|
|
gd->relocaddr = addr;
|
|
#endif
|
|
|
|
/*
|
|
* reserve memory for malloc() arena
|
|
*/
|
|
addr_sp = addr - TOTAL_MALLOC_LEN;
|
|
debug ("Reserving %dk for malloc() at: %08lx\n",
|
|
TOTAL_MALLOC_LEN >> 10, addr_sp);
|
|
|
|
/*
|
|
* (permanently) allocate a Board Info struct
|
|
* and a permanent copy of the "global" data
|
|
*/
|
|
addr_sp -= sizeof (bd_t);
|
|
bd = (bd_t *) addr_sp;
|
|
gd->bd = bd;
|
|
debug ("Reserving %zu Bytes for Board Info at: %08lx\n",
|
|
sizeof (bd_t), addr_sp);
|
|
addr_sp -= sizeof (gd_t);
|
|
id = (gd_t *) addr_sp;
|
|
debug ("Reserving %zu Bytes for Global Data at: %08lx\n",
|
|
sizeof (gd_t), addr_sp);
|
|
|
|
/*
|
|
* Finally, we set up a new (bigger) stack.
|
|
*
|
|
* Leave some safety gap for SP, force alignment on 16 byte boundary
|
|
* Clear initial stack frame
|
|
*/
|
|
addr_sp -= 16;
|
|
addr_sp &= ~0xF;
|
|
s = (ulong *)addr_sp;
|
|
*s-- = 0;
|
|
*s-- = 0;
|
|
addr_sp = (ulong)s;
|
|
debug ("Stack Pointer at: %08lx\n", addr_sp);
|
|
|
|
/*
|
|
* Save local variables to board info struct
|
|
*/
|
|
|
|
bd->bi_memstart = CONFIG_SYS_SDRAM_BASE; /* start of DRAM memory */
|
|
bd->bi_memsize = gd->ram_size; /* size of DRAM memory in bytes */
|
|
|
|
#ifdef CONFIG_IP860
|
|
bd->bi_sramstart = SRAM_BASE; /* start of SRAM memory */
|
|
bd->bi_sramsize = SRAM_SIZE; /* size of SRAM memory */
|
|
#elif defined CONFIG_MPC8220
|
|
bd->bi_sramstart = CONFIG_SYS_SRAM_BASE; /* start of SRAM memory */
|
|
bd->bi_sramsize = CONFIG_SYS_SRAM_SIZE; /* size of SRAM memory */
|
|
#else
|
|
bd->bi_sramstart = 0; /* FIXME */ /* start of SRAM memory */
|
|
bd->bi_sramsize = 0; /* FIXME */ /* size of SRAM memory */
|
|
#endif
|
|
|
|
#if defined(CONFIG_8xx) || defined(CONFIG_8260) || defined(CONFIG_5xx) || \
|
|
defined(CONFIG_E500) || defined(CONFIG_MPC86xx)
|
|
bd->bi_immr_base = CONFIG_SYS_IMMR; /* base of IMMR register */
|
|
#endif
|
|
#if defined(CONFIG_MPC5xxx)
|
|
bd->bi_mbar_base = CONFIG_SYS_MBAR; /* base of internal registers */
|
|
#endif
|
|
#if defined(CONFIG_MPC83xx)
|
|
bd->bi_immrbar = CONFIG_SYS_IMMR;
|
|
#endif
|
|
#if defined(CONFIG_MPC8220)
|
|
bd->bi_mbar_base = CONFIG_SYS_MBAR; /* base of internal registers */
|
|
bd->bi_inpfreq = gd->inp_clk;
|
|
bd->bi_pcifreq = gd->pci_clk;
|
|
bd->bi_vcofreq = gd->vco_clk;
|
|
bd->bi_pevfreq = gd->pev_clk;
|
|
bd->bi_flbfreq = gd->flb_clk;
|
|
|
|
/* store bootparam to sram (backward compatible), here? */
|
|
{
|
|
u32 *sram = (u32 *)CONFIG_SYS_SRAM_BASE;
|
|
*sram++ = gd->ram_size;
|
|
*sram++ = gd->bus_clk;
|
|
*sram++ = gd->inp_clk;
|
|
*sram++ = gd->cpu_clk;
|
|
*sram++ = gd->vco_clk;
|
|
*sram++ = gd->flb_clk;
|
|
*sram++ = 0xb8c3ba11; /* boot signature */
|
|
}
|
|
#endif
|
|
|
|
bd->bi_bootflags = bootflag; /* boot / reboot flag (for LynxOS) */
|
|
|
|
WATCHDOG_RESET ();
|
|
bd->bi_intfreq = gd->cpu_clk; /* Internal Freq, in Hz */
|
|
bd->bi_busfreq = gd->bus_clk; /* Bus Freq, in Hz */
|
|
#if defined(CONFIG_CPM2)
|
|
bd->bi_cpmfreq = gd->cpm_clk;
|
|
bd->bi_brgfreq = gd->brg_clk;
|
|
bd->bi_sccfreq = gd->scc_clk;
|
|
bd->bi_vco = gd->vco_out;
|
|
#endif /* CONFIG_CPM2 */
|
|
#if defined(CONFIG_MPC512X)
|
|
bd->bi_ipsfreq = gd->ips_clk;
|
|
#endif /* CONFIG_MPC512X */
|
|
#if defined(CONFIG_MPC5xxx)
|
|
bd->bi_ipbfreq = gd->ipb_clk;
|
|
bd->bi_pcifreq = gd->pci_clk;
|
|
#endif /* CONFIG_MPC5xxx */
|
|
bd->bi_baudrate = gd->baudrate; /* Console Baudrate */
|
|
|
|
#ifdef CONFIG_SYS_EXTBDINFO
|
|
strncpy ((char *)bd->bi_s_version, "1.2", sizeof (bd->bi_s_version));
|
|
strncpy ((char *)bd->bi_r_version, U_BOOT_VERSION, sizeof (bd->bi_r_version));
|
|
|
|
bd->bi_procfreq = gd->cpu_clk; /* Processor Speed, In Hz */
|
|
bd->bi_plb_busfreq = gd->bus_clk;
|
|
#if defined(CONFIG_405GP) || defined(CONFIG_405EP) || \
|
|
defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
|
|
defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
|
|
bd->bi_pci_busfreq = get_PCI_freq ();
|
|
bd->bi_opbfreq = get_OPB_freq ();
|
|
#elif defined(CONFIG_XILINX_405)
|
|
bd->bi_pci_busfreq = get_PCI_freq ();
|
|
#endif
|
|
#endif
|
|
|
|
debug ("New Stack Pointer is: %08lx\n", addr_sp);
|
|
|
|
WATCHDOG_RESET ();
|
|
|
|
#ifdef CONFIG_POST
|
|
post_bootmode_init();
|
|
post_run (NULL, POST_ROM | post_bootmode_get(0));
|
|
#endif
|
|
|
|
WATCHDOG_RESET();
|
|
|
|
memcpy (id, (void *)gd, sizeof (gd_t));
|
|
|
|
relocate_code (addr_sp, id, addr);
|
|
|
|
/* NOTREACHED - relocate_code() does not return */
|
|
}
|
|
|
|
/************************************************************************
|
|
*
|
|
* This is the next part if the initialization sequence: we are now
|
|
* running from RAM and have a "normal" C environment, i. e. global
|
|
* data can be written, BSS has been cleared, the stack size in not
|
|
* that critical any more, etc.
|
|
*
|
|
************************************************************************
|
|
*/
|
|
void board_init_r (gd_t *id, ulong dest_addr)
|
|
{
|
|
char *s;
|
|
bd_t *bd;
|
|
ulong malloc_start;
|
|
|
|
#ifndef CONFIG_SYS_NO_FLASH
|
|
ulong flash_size;
|
|
#endif
|
|
|
|
gd = id; /* initialize RAM version of global data */
|
|
bd = gd->bd;
|
|
|
|
gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */
|
|
|
|
/* The Malloc area is immediately below the monitor copy in DRAM */
|
|
malloc_start = dest_addr - TOTAL_MALLOC_LEN;
|
|
|
|
#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
|
|
/*
|
|
* The gd->cpu pointer is set to an address in flash before relocation.
|
|
* We need to update it to point to the same CPU entry in RAM.
|
|
*/
|
|
gd->cpu += dest_addr - CONFIG_SYS_MONITOR_BASE;
|
|
#endif
|
|
|
|
#ifdef CONFIG_SERIAL_MULTI
|
|
serial_initialize();
|
|
#endif
|
|
|
|
debug ("Now running in RAM - U-Boot at: %08lx\n", dest_addr);
|
|
|
|
WATCHDOG_RESET ();
|
|
|
|
/*
|
|
* Setup trap handlers
|
|
*/
|
|
trap_init (dest_addr);
|
|
|
|
#ifdef CONFIG_ADDR_MAP
|
|
init_addr_map();
|
|
#endif
|
|
|
|
#if defined(CONFIG_BOARD_EARLY_INIT_R)
|
|
board_early_init_r ();
|
|
#endif
|
|
|
|
monitor_flash_len = (ulong)&__init_end - dest_addr;
|
|
|
|
WATCHDOG_RESET ();
|
|
|
|
#ifdef CONFIG_LOGBUFFER
|
|
logbuff_init_ptrs ();
|
|
#endif
|
|
#ifdef CONFIG_POST
|
|
post_output_backlog ();
|
|
#endif
|
|
|
|
WATCHDOG_RESET();
|
|
|
|
#if defined(CONFIG_SYS_DELAYED_ICACHE) || defined(CONFIG_MPC83xx)
|
|
icache_enable (); /* it's time to enable the instruction cache */
|
|
#endif
|
|
|
|
#if defined(CONFIG_SYS_INIT_RAM_LOCK) && defined(CONFIG_E500)
|
|
unlock_ram_in_cache(); /* it's time to unlock D-cache in e500 */
|
|
#endif
|
|
|
|
#if defined(CONFIG_BAB7xx) || defined(CONFIG_CPC45)
|
|
/*
|
|
* Do PCI configuration on BAB7xx and CPC45 _before_ the flash
|
|
* gets initialised, because we need the ISA resp. PCI_to_LOCAL bus
|
|
* bridge there.
|
|
*/
|
|
pci_init ();
|
|
#endif
|
|
#if defined(CONFIG_BAB7xx)
|
|
/*
|
|
* Initialise the ISA bridge
|
|
*/
|
|
initialise_w83c553f ();
|
|
#endif
|
|
|
|
asm ("sync ; isync");
|
|
|
|
mem_malloc_init (malloc_start, TOTAL_MALLOC_LEN);
|
|
|
|
#if !defined(CONFIG_SYS_NO_FLASH)
|
|
puts ("FLASH: ");
|
|
|
|
if ((flash_size = flash_init ()) > 0) {
|
|
# ifdef CONFIG_SYS_FLASH_CHECKSUM
|
|
print_size (flash_size, "");
|
|
/*
|
|
* Compute and print flash CRC if flashchecksum is set to 'y'
|
|
*
|
|
* NOTE: Maybe we should add some WATCHDOG_RESET()? XXX
|
|
*/
|
|
s = getenv ("flashchecksum");
|
|
if (s && (*s == 'y')) {
|
|
printf (" CRC: %08X",
|
|
crc32 (0, (const unsigned char *) CONFIG_SYS_FLASH_BASE, flash_size)
|
|
);
|
|
}
|
|
putc ('\n');
|
|
# else /* !CONFIG_SYS_FLASH_CHECKSUM */
|
|
print_size (flash_size, "\n");
|
|
# endif /* CONFIG_SYS_FLASH_CHECKSUM */
|
|
} else {
|
|
puts (failed);
|
|
hang ();
|
|
}
|
|
|
|
bd->bi_flashstart = CONFIG_SYS_FLASH_BASE; /* update start of FLASH memory */
|
|
bd->bi_flashsize = flash_size; /* size of FLASH memory (final value) */
|
|
|
|
#if defined(CONFIG_SYS_UPDATE_FLASH_SIZE)
|
|
/* Make a update of the Memctrl. */
|
|
update_flash_size (flash_size);
|
|
#endif
|
|
|
|
|
|
# if defined(CONFIG_PCU_E) || defined(CONFIG_OXC) || defined(CONFIG_RMU)
|
|
/* flash mapped at end of memory map */
|
|
bd->bi_flashoffset = TEXT_BASE + flash_size;
|
|
# elif CONFIG_SYS_MONITOR_BASE == CONFIG_SYS_FLASH_BASE
|
|
bd->bi_flashoffset = monitor_flash_len; /* reserved area for startup monitor */
|
|
# else
|
|
bd->bi_flashoffset = 0;
|
|
# endif
|
|
#else /* CONFIG_SYS_NO_FLASH */
|
|
|
|
bd->bi_flashsize = 0;
|
|
bd->bi_flashstart = 0;
|
|
bd->bi_flashoffset = 0;
|
|
#endif /* !CONFIG_SYS_NO_FLASH */
|
|
|
|
WATCHDOG_RESET ();
|
|
|
|
/* initialize higher level parts of CPU like time base and timers */
|
|
cpu_init_r ();
|
|
|
|
WATCHDOG_RESET ();
|
|
|
|
#ifdef CONFIG_SPI
|
|
# if !defined(CONFIG_ENV_IS_IN_EEPROM)
|
|
spi_init_f ();
|
|
# endif
|
|
spi_init_r ();
|
|
#endif
|
|
|
|
#if defined(CONFIG_CMD_NAND)
|
|
WATCHDOG_RESET ();
|
|
puts ("NAND: ");
|
|
nand_init(); /* go init the NAND */
|
|
#endif
|
|
|
|
/* relocate environment function pointers etc. */
|
|
env_relocate ();
|
|
|
|
/*
|
|
* Fill in missing fields of bd_info.
|
|
* We do this here, where we have "normal" access to the
|
|
* environment; we used to do this still running from ROM,
|
|
* where had to use getenv_r(), which can be pretty slow when
|
|
* the environment is in EEPROM.
|
|
*/
|
|
|
|
#if defined(CONFIG_SYS_EXTBDINFO)
|
|
#if defined(CONFIG_405GP) || defined(CONFIG_405EP)
|
|
#if defined(CONFIG_I2CFAST)
|
|
/*
|
|
* set bi_iic_fast for linux taking environment variable
|
|
* "i2cfast" into account
|
|
*/
|
|
{
|
|
char *s = getenv ("i2cfast");
|
|
if (s && ((*s == 'y') || (*s == 'Y'))) {
|
|
bd->bi_iic_fast[0] = 1;
|
|
bd->bi_iic_fast[1] = 1;
|
|
} else {
|
|
bd->bi_iic_fast[0] = 0;
|
|
bd->bi_iic_fast[1] = 0;
|
|
}
|
|
}
|
|
#else
|
|
bd->bi_iic_fast[0] = 0;
|
|
bd->bi_iic_fast[1] = 0;
|
|
#endif /* CONFIG_I2CFAST */
|
|
#endif /* CONFIG_405GP, CONFIG_405EP */
|
|
#endif /* CONFIG_SYS_EXTBDINFO */
|
|
|
|
#if defined(CONFIG_SC3)
|
|
sc3_read_eeprom();
|
|
#endif
|
|
|
|
#if defined (CONFIG_ID_EEPROM) || defined (CONFIG_SYS_I2C_MAC_OFFSET)
|
|
mac_read_from_eeprom();
|
|
#endif
|
|
|
|
#ifdef CONFIG_HERMES
|
|
if ((gd->board_type >> 16) == 2)
|
|
bd->bi_ethspeed = gd->board_type & 0xFFFF;
|
|
else
|
|
bd->bi_ethspeed = 0xFFFF;
|
|
#endif
|
|
|
|
#ifdef CONFIG_CMD_NET
|
|
/* kept around for legacy kernels only ... ignore the next section */
|
|
eth_getenv_enetaddr("ethaddr", bd->bi_enetaddr);
|
|
#ifdef CONFIG_HAS_ETH1
|
|
eth_getenv_enetaddr("eth1addr", bd->bi_enet1addr);
|
|
#endif
|
|
#ifdef CONFIG_HAS_ETH2
|
|
eth_getenv_enetaddr("eth2addr", bd->bi_enet2addr);
|
|
#endif
|
|
#ifdef CONFIG_HAS_ETH3
|
|
eth_getenv_enetaddr("eth3addr", bd->bi_enet3addr);
|
|
#endif
|
|
#ifdef CONFIG_HAS_ETH4
|
|
eth_getenv_enetaddr("eth4addr", bd->bi_enet4addr);
|
|
#endif
|
|
#ifdef CONFIG_HAS_ETH5
|
|
eth_getenv_enetaddr("eth5addr", bd->bi_enet5addr);
|
|
#endif
|
|
#endif /* CONFIG_CMD_NET */
|
|
|
|
/* IP Address */
|
|
bd->bi_ip_addr = getenv_IPaddr ("ipaddr");
|
|
|
|
WATCHDOG_RESET ();
|
|
|
|
#if defined(CONFIG_PCI) && !defined(CONFIG_BAB7xx) && !defined(CONFIG_CPC45)
|
|
/*
|
|
* Do pci configuration
|
|
*/
|
|
pci_init ();
|
|
#endif
|
|
|
|
/** leave this here (after malloc(), environment and PCI are working) **/
|
|
/* Initialize stdio devices */
|
|
stdio_init ();
|
|
|
|
/* Initialize the jump table for applications */
|
|
jumptable_init ();
|
|
|
|
#if defined(CONFIG_API)
|
|
/* Initialize API */
|
|
api_init ();
|
|
#endif
|
|
|
|
/* Initialize the console (after the relocation and devices init) */
|
|
console_init_r ();
|
|
|
|
#if defined(CONFIG_MISC_INIT_R)
|
|
/* miscellaneous platform dependent initialisations */
|
|
misc_init_r ();
|
|
#endif
|
|
|
|
#ifdef CONFIG_HERMES
|
|
if (bd->bi_ethspeed != 0xFFFF)
|
|
hermes_start_lxt980 ((int) bd->bi_ethspeed);
|
|
#endif
|
|
|
|
#if defined(CONFIG_CMD_KGDB)
|
|
WATCHDOG_RESET ();
|
|
puts ("KGDB: ");
|
|
kgdb_init ();
|
|
#endif
|
|
|
|
debug ("U-Boot relocated to %08lx\n", dest_addr);
|
|
|
|
/*
|
|
* Enable Interrupts
|
|
*/
|
|
interrupt_init ();
|
|
|
|
/* Must happen after interrupts are initialized since
|
|
* an irq handler gets installed
|
|
*/
|
|
#ifdef CONFIG_SERIAL_SOFTWARE_FIFO
|
|
serial_buffered_init();
|
|
#endif
|
|
|
|
#if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT)
|
|
status_led_set (STATUS_LED_BOOT, STATUS_LED_BLINKING);
|
|
#endif
|
|
|
|
udelay (20);
|
|
|
|
set_timer (0);
|
|
|
|
/* Initialize from environment */
|
|
if ((s = getenv ("loadaddr")) != NULL) {
|
|
load_addr = simple_strtoul (s, NULL, 16);
|
|
}
|
|
#if defined(CONFIG_CMD_NET)
|
|
if ((s = getenv ("bootfile")) != NULL) {
|
|
copy_filename (BootFile, s, sizeof (BootFile));
|
|
}
|
|
#endif
|
|
|
|
WATCHDOG_RESET ();
|
|
|
|
#if defined(CONFIG_DTT) /* Digital Thermometers and Thermostats */
|
|
dtt_init ();
|
|
#endif
|
|
#if defined(CONFIG_CMD_SCSI)
|
|
WATCHDOG_RESET ();
|
|
puts ("SCSI: ");
|
|
scsi_init ();
|
|
#endif
|
|
|
|
#ifdef CONFIG_GENERIC_MMC
|
|
WATCHDOG_RESET ();
|
|
puts ("MMC: ");
|
|
mmc_initialize (bd);
|
|
#endif
|
|
|
|
#if defined(CONFIG_CMD_DOC)
|
|
WATCHDOG_RESET ();
|
|
puts ("DOC: ");
|
|
doc_init ();
|
|
#endif
|
|
|
|
#ifdef CONFIG_BITBANGMII
|
|
bb_miiphy_init();
|
|
#endif
|
|
#if defined(CONFIG_CMD_NET)
|
|
#if defined(CONFIG_NET_MULTI)
|
|
WATCHDOG_RESET ();
|
|
puts ("Net: ");
|
|
#endif
|
|
eth_initialize (bd);
|
|
#endif
|
|
|
|
#if defined(CONFIG_CMD_NET) && defined(CONFIG_RESET_PHY_R)
|
|
WATCHDOG_RESET ();
|
|
debug ("Reset Ethernet PHY\n");
|
|
reset_phy ();
|
|
#endif
|
|
|
|
#ifdef CONFIG_POST
|
|
post_run (NULL, POST_RAM | post_bootmode_get(0));
|
|
#endif
|
|
|
|
#if defined(CONFIG_CMD_PCMCIA) \
|
|
&& !defined(CONFIG_CMD_IDE)
|
|
WATCHDOG_RESET ();
|
|
puts ("PCMCIA:");
|
|
pcmcia_init ();
|
|
#endif
|
|
|
|
#if defined(CONFIG_CMD_IDE)
|
|
WATCHDOG_RESET ();
|
|
# ifdef CONFIG_IDE_8xx_PCCARD
|
|
puts ("PCMCIA:");
|
|
# else
|
|
puts ("IDE: ");
|
|
#endif
|
|
#if defined(CONFIG_START_IDE)
|
|
if (board_start_ide())
|
|
ide_init ();
|
|
#else
|
|
ide_init ();
|
|
#endif
|
|
#endif
|
|
|
|
#ifdef CONFIG_LAST_STAGE_INIT
|
|
WATCHDOG_RESET ();
|
|
/*
|
|
* Some parts can be only initialized if all others (like
|
|
* Interrupts) are up and running (i.e. the PC-style ISA
|
|
* keyboard).
|
|
*/
|
|
last_stage_init ();
|
|
#endif
|
|
|
|
#if defined(CONFIG_CMD_BEDBUG)
|
|
WATCHDOG_RESET ();
|
|
bedbug_init ();
|
|
#endif
|
|
|
|
#if defined(CONFIG_PRAM) || defined(CONFIG_LOGBUFFER)
|
|
/*
|
|
* Export available size of memory for Linux,
|
|
* taking into account the protected RAM at top of memory
|
|
*/
|
|
{
|
|
ulong pram;
|
|
uchar memsz[32];
|
|
#ifdef CONFIG_PRAM
|
|
char *s;
|
|
|
|
if ((s = getenv ("pram")) != NULL) {
|
|
pram = simple_strtoul (s, NULL, 10);
|
|
} else {
|
|
pram = CONFIG_PRAM;
|
|
}
|
|
#else
|
|
pram=0;
|
|
#endif
|
|
#ifdef CONFIG_LOGBUFFER
|
|
#ifndef CONFIG_ALT_LB_ADDR
|
|
/* Also take the logbuffer into account (pram is in kB) */
|
|
pram += (LOGBUFF_LEN+LOGBUFF_OVERHEAD)/1024;
|
|
#endif
|
|
#endif
|
|
sprintf ((char *)memsz, "%ldk", (bd->bi_memsize / 1024) - pram);
|
|
setenv ("mem", (char *)memsz);
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_PS2KBD
|
|
puts ("PS/2: ");
|
|
kbd_init();
|
|
#endif
|
|
|
|
#ifdef CONFIG_MODEM_SUPPORT
|
|
{
|
|
extern int do_mdm_init;
|
|
do_mdm_init = gd->do_mdm_init;
|
|
}
|
|
#endif
|
|
|
|
/* Initialization complete - start the monitor */
|
|
|
|
/* main_loop() can return to retry autoboot, if so just run it again. */
|
|
for (;;) {
|
|
WATCHDOG_RESET ();
|
|
main_loop ();
|
|
}
|
|
|
|
/* NOTREACHED - no way out of command loop except booting */
|
|
}
|
|
|
|
void hang (void)
|
|
{
|
|
puts ("### ERROR ### Please RESET the board ###\n");
|
|
show_boot_progress(-30);
|
|
for (;;);
|
|
}
|
|
|
|
|
|
#if 0 /* We could use plain global data, but the resulting code is bigger */
|
|
/*
|
|
* Pointer to initial global data area
|
|
*
|
|
* Here we initialize it.
|
|
*/
|
|
#undef XTRN_DECLARE_GLOBAL_DATA_PTR
|
|
#define XTRN_DECLARE_GLOBAL_DATA_PTR /* empty = allocate here */
|
|
DECLARE_GLOBAL_DATA_PTR = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
|
|
#endif /* 0 */
|
|
|
|
/************************************************************************/
|
|
|