upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/include/lcd.h

325 lines
9.6 KiB

/*
* MPC823 and PXA LCD Controller
*
* Modeled after video interface by Paolo Scaffardi
*
*
* (C) Copyright 2001
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef _LCD_H_
#define _LCD_H_
extern char lcd_is_enabled;
extern int lcd_line_length;
extern int lcd_color_fg;
extern int lcd_color_bg;
/*
* Frame buffer memory information
*/
extern void *lcd_base; /* Start of framebuffer memory */
extern void *lcd_console_address; /* Start of console buffer */
extern short console_col;
extern short console_row;
#if defined CONFIG_MPC823
/*
* LCD controller stucture for MPC823 CPU
*/
typedef struct vidinfo {
ushort vl_col; /* Number of columns (i.e. 640) */
ushort vl_row; /* Number of rows (i.e. 480) */
ushort vl_width; /* Width of display area in millimeters */
ushort vl_height; /* Height of display area in millimeters */
/* LCD configuration register */
u_char vl_clkp; /* Clock polarity */
u_char vl_oep; /* Output Enable polarity */
u_char vl_hsp; /* Horizontal Sync polarity */
u_char vl_vsp; /* Vertical Sync polarity */
u_char vl_dp; /* Data polarity */
u_char vl_bpix; /* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8 */
u_char vl_lbw; /* LCD Bus width, 0 = 4, 1 = 8 */
u_char vl_splt; /* Split display, 0 = single-scan, 1 = dual-scan */
u_char vl_clor; /* Color, 0 = mono, 1 = color */
u_char vl_tft; /* 0 = passive, 1 = TFT */
/* Horizontal control register. Timing from data sheet */
ushort vl_wbl; /* Wait between lines */
/* Vertical control register */
u_char vl_vpw; /* Vertical sync pulse width */
u_char vl_lcdac; /* LCD AC timing */
u_char vl_wbf; /* Wait between frames */
} vidinfo_t;
extern vidinfo_t panel_info;
#elif defined CONFIG_PXA250
/*
* PXA LCD DMA descriptor
*/
struct pxafb_dma_descriptor {
u_long fdadr; /* Frame descriptor address register */
u_long fsadr; /* Frame source address register */
u_long fidr; /* Frame ID register */
u_long ldcmd; /* Command register */
};
/*
* PXA LCD info
*/
struct pxafb_info {
/* Misc registers */
u_long reg_lccr3;
u_long reg_lccr2;
u_long reg_lccr1;
u_long reg_lccr0;
u_long fdadr0;
u_long fdadr1;
/* DMA descriptors */
struct pxafb_dma_descriptor * dmadesc_fblow;
struct pxafb_dma_descriptor * dmadesc_fbhigh;
struct pxafb_dma_descriptor * dmadesc_palette;
u_long screen; /* physical address of frame buffer */
u_long palette; /* physical address of palette memory */
u_int palette_size;
};
/*
* LCD controller stucture for PXA CPU
*/
typedef struct vidinfo {
ushort vl_col; /* Number of columns (i.e. 640) */
ushort vl_row; /* Number of rows (i.e. 480) */
ushort vl_width; /* Width of display area in millimeters */
ushort vl_height; /* Height of display area in millimeters */
/* LCD configuration register */
u_char vl_clkp; /* Clock polarity */
u_char vl_oep; /* Output Enable polarity */
u_char vl_hsp; /* Horizontal Sync polarity */
u_char vl_vsp; /* Vertical Sync polarity */
u_char vl_dp; /* Data polarity */
u_char vl_bpix; /* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8, 4 = 16 */
u_char vl_lbw; /* LCD Bus width, 0 = 4, 1 = 8 */
u_char vl_splt; /* Split display, 0 = single-scan, 1 = dual-scan */
u_char vl_clor; /* Color, 0 = mono, 1 = color */
u_char vl_tft; /* 0 = passive, 1 = TFT */
/* Horizontal control register. Timing from data sheet */
ushort vl_hpw; /* Horz sync pulse width */
u_char vl_blw; /* Wait before of line */
u_char vl_elw; /* Wait end of line */
/* Vertical control register. */
u_char vl_vpw; /* Vertical sync pulse width */
u_char vl_bfw; /* Wait before of frame */
u_char vl_efw; /* Wait end of frame */
/* PXA LCD controller params */
struct pxafb_info pxa;
} vidinfo_t;
extern vidinfo_t panel_info;
#elif defined(CONFIG_ATMEL_LCD)
typedef struct vidinfo {
u_long vl_col; /* Number of columns (i.e. 640) */
u_long vl_row; /* Number of rows (i.e. 480) */
u_long vl_clk; /* pixel clock in ps */
/* LCD configuration register */
u_long vl_sync; /* Horizontal / vertical sync */
u_long vl_bpix; /* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8, 4 = 16 */
u_long vl_tft; /* 0 = passive, 1 = TFT */
/* Horizontal control register. */
u_long vl_hsync_len; /* Length of horizontal sync */
u_long vl_left_margin; /* Time from sync to picture */
u_long vl_right_margin; /* Time from picture to sync */
/* Vertical control register. */
u_long vl_vsync_len; /* Length of vertical sync */
u_long vl_upper_margin; /* Time from sync to picture */
u_long vl_lower_margin; /* Time from picture to sync */
u_long mmio; /* Memory mapped registers */
} vidinfo_t;
extern vidinfo_t panel_info;
#else
typedef struct vidinfo {
ushort vl_col; /* Number of columns (i.e. 160) */
ushort vl_row; /* Number of rows (i.e. 100) */
u_char vl_bpix; /* Bits per pixel, 0 = 1 */
ushort *cmap; /* Pointer to the colormap */
void *priv; /* Pointer to driver-specific data */
} vidinfo_t;
#endif /* CONFIG_MPC823, CONFIG_PXA250 or CONFIG_MCC200 or CONFIG_ATMEL_LCD */
/* Video functions */
#if defined(CONFIG_RBC823)
void lcd_disable (void);
#endif
/* int lcd_init (void *lcdbase); */
void lcd_putc (const char c);
void lcd_puts (const char *s);
void lcd_printf (const char *fmt, ...);
/* Allow boards to customize the information displayed */
void lcd_show_board_info(void);
/************************************************************************/
/* ** BITMAP DISPLAY SUPPORT */
/************************************************************************/
#if defined(CONFIG_CMD_BMP) || defined(CONFIG_SPLASH_SCREEN)
# include <bmp_layout.h>
# include <asm/byteorder.h>
#endif
/*
* Information about displays we are using. This is for configuring
* the LCD controller and memory allocation. Someone has to know what
* is connected, as we can't autodetect anything.
*/
#define CONFIG_SYS_HIGH 0 /* Pins are active high */
#define CONFIG_SYS_LOW 1 /* Pins are active low */
#define LCD_MONOCHROME 0
#define LCD_COLOR2 1
#define LCD_COLOR4 2
#define LCD_COLOR8 3
#define LCD_COLOR16 4
/*----------------------------------------------------------------------*/
#if defined(CONFIG_LCD_INFO_BELOW_LOGO)
# define LCD_INFO_X 0
# define LCD_INFO_Y (BMP_LOGO_HEIGHT + VIDEO_FONT_HEIGHT)
#elif defined(CONFIG_LCD_LOGO)
# define LCD_INFO_X (BMP_LOGO_WIDTH + 4 * VIDEO_FONT_WIDTH)
# define LCD_INFO_Y (VIDEO_FONT_HEIGHT)
#else
# define LCD_INFO_X (VIDEO_FONT_WIDTH)
# define LCD_INFO_Y (VIDEO_FONT_HEIGHT)
#endif
/* Default to 8bpp if bit depth not specified */
#ifndef LCD_BPP
# define LCD_BPP LCD_COLOR8
#endif
#ifndef LCD_DF
# define LCD_DF 1
#endif
/* Calculate nr. of bits per pixel and nr. of colors */
#define NBITS(bit_code) (1 << (bit_code))
#define NCOLORS(bit_code) (1 << NBITS(bit_code))
/************************************************************************/
/* ** CONSOLE CONSTANTS */
/************************************************************************/
#if LCD_BPP == LCD_MONOCHROME
/*
* Simple black/white definitions
*/
# define CONSOLE_COLOR_BLACK 0
# define CONSOLE_COLOR_WHITE 1 /* Must remain last / highest */
#elif LCD_BPP == LCD_COLOR8
/*
* 8bpp color definitions
*/
# define CONSOLE_COLOR_BLACK 0
# define CONSOLE_COLOR_RED 1
# define CONSOLE_COLOR_GREEN 2
# define CONSOLE_COLOR_YELLOW 3
# define CONSOLE_COLOR_BLUE 4
# define CONSOLE_COLOR_MAGENTA 5
# define CONSOLE_COLOR_CYAN 6
# define CONSOLE_COLOR_GREY 14
# define CONSOLE_COLOR_WHITE 15 /* Must remain last / highest */
#else
/*
* 16bpp color definitions
*/
# define CONSOLE_COLOR_BLACK 0x0000
# define CONSOLE_COLOR_WHITE 0xffff /* Must remain last / highest */
#endif /* color definitions */
/************************************************************************/
#ifndef PAGE_SIZE
# define PAGE_SIZE 4096
#endif
/************************************************************************/
/* ** CONSOLE DEFINITIONS & FUNCTIONS */
/************************************************************************/
#if defined(CONFIG_LCD_LOGO) && !defined(CONFIG_LCD_INFO_BELOW_LOGO)
# define CONSOLE_ROWS ((panel_info.vl_row-BMP_LOGO_HEIGHT) \
/ VIDEO_FONT_HEIGHT)
#else
# define CONSOLE_ROWS (panel_info.vl_row / VIDEO_FONT_HEIGHT)
#endif
#define CONSOLE_COLS (panel_info.vl_col / VIDEO_FONT_WIDTH)
#define CONSOLE_ROW_SIZE (VIDEO_FONT_HEIGHT * lcd_line_length)
#define CONSOLE_ROW_FIRST (lcd_console_address)
#define CONSOLE_ROW_SECOND (lcd_console_address + CONSOLE_ROW_SIZE)
#define CONSOLE_ROW_LAST (lcd_console_address + CONSOLE_SIZE \
- CONSOLE_ROW_SIZE)
#define CONSOLE_SIZE (CONSOLE_ROW_SIZE * CONSOLE_ROWS)
#define CONSOLE_SCROLL_SIZE (CONSOLE_SIZE - CONSOLE_ROW_SIZE)
#if LCD_BPP == LCD_MONOCHROME
# define COLOR_MASK(c) ((c) | (c) << 1 | (c) << 2 | (c) << 3 | \
(c) << 4 | (c) << 5 | (c) << 6 | (c) << 7)
#elif LCD_BPP == LCD_COLOR8
# define COLOR_MASK(c) (c)
#else
# error Unsupported LCD BPP.
#endif
/************************************************************************/
#endif /* _LCD_H_ */