upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
157 lines
4.7 KiB
157 lines
4.7 KiB
/*
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <ppc_asm.tmpl>
|
|
#include <config.h>
|
|
|
|
/* General */
|
|
#define TLB_VALID 0x00000200
|
|
#define _256M 0x10000000
|
|
|
|
/* Supported page sizes */
|
|
|
|
#define SZ_1K 0x00000000
|
|
#define SZ_4K 0x00000010
|
|
#define SZ_16K 0x00000020
|
|
#define SZ_64K 0x00000030
|
|
#define SZ_256K 0x00000040
|
|
#define SZ_1M 0x00000050
|
|
#define SZ_8M 0x00000060
|
|
#define SZ_16M 0x00000070
|
|
#define SZ_256M 0x00000090
|
|
|
|
/* Storage attributes */
|
|
#define SA_W 0x00000800 /* Write-through */
|
|
#define SA_I 0x00000400 /* Caching inhibited */
|
|
#define SA_M 0x00000200 /* Memory coherence */
|
|
#define SA_G 0x00000100 /* Guarded */
|
|
#define SA_E 0x00000080 /* Endian */
|
|
|
|
/* Access control */
|
|
#define AC_X 0x00000024 /* Execute */
|
|
#define AC_W 0x00000012 /* Write */
|
|
#define AC_R 0x00000009 /* Read */
|
|
|
|
/* Some handy macros */
|
|
|
|
#define EPN(e) ((e) & 0xfffffc00)
|
|
#define TLB0(epn,sz) ( (EPN((epn)) | (sz) | TLB_VALID ) )
|
|
#define TLB1(rpn,erpn) ( ((rpn)&0xfffffc00) | (erpn) )
|
|
#define TLB2(a) ( (a)&0x00000fbf )
|
|
|
|
#define tlbtab_start\
|
|
mflr r1 ;\
|
|
bl 0f ;
|
|
|
|
#define tlbtab_end\
|
|
.long 0, 0, 0 ; \
|
|
0: mflr r0 ; \
|
|
mtlr r1 ; \
|
|
blr ;
|
|
|
|
#define tlbentry(epn,sz,rpn,erpn,attr)\
|
|
.long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr)
|
|
|
|
|
|
/**************************************************************************
|
|
* TLB TABLE
|
|
*
|
|
* This table is used by the cpu boot code to setup the initial tlb
|
|
* entries. Rather than make broad assumptions in the cpu source tree,
|
|
* this table lets each board set things up however they like.
|
|
*
|
|
* Pointer to the table is returned in r1
|
|
*
|
|
*************************************************************************/
|
|
.section .bootpg,"ax"
|
|
.globl tlbtab
|
|
|
|
tlbtab:
|
|
tlbtab_start
|
|
|
|
/*
|
|
* BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the
|
|
* speed up boot process. It is patched after relocation to enable SA_I
|
|
*/
|
|
#ifndef CONFIG_NAND_SPL
|
|
tlbentry( CFG_BOOT_BASE_ADDR, SZ_256M, CFG_BOOT_BASE_ADDR, 1, AC_R|AC_W|AC_X|SA_G )
|
|
#else
|
|
tlbentry( CFG_NAND_BOOT_SPL_SRC, SZ_4K, CFG_NAND_BOOT_SPL_SRC, 1, AC_R|AC_W|AC_X|SA_G )
|
|
#endif
|
|
|
|
/* TLB-entry for DDR SDRAM (Up to 2GB) */
|
|
tlbentry( CFG_SDRAM_BASE, SZ_256M, CFG_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
|
|
|
|
#ifdef CFG_INIT_RAM_DCACHE
|
|
/* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
|
|
tlbentry( CFG_INIT_RAM_ADDR, SZ_64K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G )
|
|
#endif
|
|
|
|
/* TLB-entry for PCI Memory */
|
|
tlbentry( CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 1, AC_R|AC_W|SA_G|SA_I )
|
|
tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 1, AC_R|AC_W|SA_G|SA_I )
|
|
tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 1, AC_R|AC_W|SA_G|SA_I )
|
|
tlbentry( CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 1, AC_R|AC_W|SA_G|SA_I )
|
|
|
|
/* TLB-entry for EBC */
|
|
tlbentry( CFG_BCSR_BASE, SZ_1K, CFG_BCSR_BASE, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
|
|
|
|
/* TLB-entry for NAND */
|
|
tlbentry( CFG_NAND_ADDR, SZ_1K, CFG_NAND_ADDR, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
|
|
|
|
/* TLB-entry for Internal Registers & OCM */
|
|
tlbentry( 0xe0000000, SZ_16M, 0xe0000000, 0, AC_R|AC_W|AC_X|SA_I )
|
|
|
|
/*TLB-entry PCI registers*/
|
|
tlbentry( 0xEEC00000, SZ_1K, 0xEEC00000, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
|
|
|
|
/* TLB-entry for peripherals */
|
|
tlbentry( 0xEF000000, SZ_16M, 0xEF000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I)
|
|
|
|
tlbtab_end
|
|
|
|
#if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
|
|
/*
|
|
* For NAND booting the first TLB has to be reconfigured to full size
|
|
* and with caching disabled after running from RAM!
|
|
*/
|
|
#define TLB00 TLB0(CFG_BOOT_BASE_ADDR, SZ_256M)
|
|
#define TLB01 TLB1(CFG_BOOT_BASE_ADDR, 1)
|
|
#define TLB02 TLB2(AC_R|AC_W|AC_X|SA_G|SA_I)
|
|
|
|
.globl reconfig_tlb0
|
|
reconfig_tlb0:
|
|
sync
|
|
isync
|
|
addi r4,r0,0x0000 /* TLB entry #0 */
|
|
lis r5,TLB00@h
|
|
ori r5,r5,TLB00@l
|
|
tlbwe r5,r4,0x0000 /* Save it out */
|
|
lis r5,TLB01@h
|
|
ori r5,r5,TLB01@l
|
|
tlbwe r5,r4,0x0001 /* Save it out */
|
|
lis r5,TLB02@h
|
|
ori r5,r5,TLB02@l
|
|
tlbwe r5,r4,0x0002 /* Save it out */
|
|
sync
|
|
isync
|
|
blr
|
|
#endif
|
|
|