upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
592 lines
15 KiB
592 lines
15 KiB
/*
|
|
* Copyright (C) 2005-2006 Atmel Corporation
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*/
|
|
#include <common.h>
|
|
|
|
/*
|
|
* The u-boot networking stack is a little weird. It seems like the
|
|
* networking core allocates receive buffers up front without any
|
|
* regard to the hardware that's supposed to actually receive those
|
|
* packets.
|
|
*
|
|
* The MACB receives packets into 128-byte receive buffers, so the
|
|
* buffers allocated by the core isn't very practical to use. We'll
|
|
* allocate our own, but we need one such buffer in case a packet
|
|
* wraps around the DMA ring so that we have to copy it.
|
|
*
|
|
* Therefore, define CONFIG_SYS_RX_ETH_BUFFER to 1 in the board-specific
|
|
* configuration header. This way, the core allocates one RX buffer
|
|
* and one TX buffer, each of which can hold a ethernet packet of
|
|
* maximum size.
|
|
*
|
|
* For some reason, the networking core unconditionally specifies a
|
|
* 32-byte packet "alignment" (which really should be called
|
|
* "padding"). MACB shouldn't need that, but we'll refrain from any
|
|
* core modifications here...
|
|
*/
|
|
|
|
#include <net.h>
|
|
#include <netdev.h>
|
|
#include <malloc.h>
|
|
#include <miiphy.h>
|
|
|
|
#include <linux/mii.h>
|
|
#include <asm/io.h>
|
|
#include <asm/dma-mapping.h>
|
|
#include <asm/arch/clk.h>
|
|
|
|
#include "macb.h"
|
|
|
|
#define barrier() asm volatile("" ::: "memory")
|
|
|
|
#define CONFIG_SYS_MACB_RX_BUFFER_SIZE 4096
|
|
#define CONFIG_SYS_MACB_RX_RING_SIZE (CONFIG_SYS_MACB_RX_BUFFER_SIZE / 128)
|
|
#define CONFIG_SYS_MACB_TX_RING_SIZE 16
|
|
#define CONFIG_SYS_MACB_TX_TIMEOUT 1000
|
|
#define CONFIG_SYS_MACB_AUTONEG_TIMEOUT 5000000
|
|
|
|
struct macb_dma_desc {
|
|
u32 addr;
|
|
u32 ctrl;
|
|
};
|
|
|
|
#define RXADDR_USED 0x00000001
|
|
#define RXADDR_WRAP 0x00000002
|
|
|
|
#define RXBUF_FRMLEN_MASK 0x00000fff
|
|
#define RXBUF_FRAME_START 0x00004000
|
|
#define RXBUF_FRAME_END 0x00008000
|
|
#define RXBUF_TYPEID_MATCH 0x00400000
|
|
#define RXBUF_ADDR4_MATCH 0x00800000
|
|
#define RXBUF_ADDR3_MATCH 0x01000000
|
|
#define RXBUF_ADDR2_MATCH 0x02000000
|
|
#define RXBUF_ADDR1_MATCH 0x04000000
|
|
#define RXBUF_BROADCAST 0x80000000
|
|
|
|
#define TXBUF_FRMLEN_MASK 0x000007ff
|
|
#define TXBUF_FRAME_END 0x00008000
|
|
#define TXBUF_NOCRC 0x00010000
|
|
#define TXBUF_EXHAUSTED 0x08000000
|
|
#define TXBUF_UNDERRUN 0x10000000
|
|
#define TXBUF_MAXRETRY 0x20000000
|
|
#define TXBUF_WRAP 0x40000000
|
|
#define TXBUF_USED 0x80000000
|
|
|
|
struct macb_device {
|
|
void *regs;
|
|
|
|
unsigned int rx_tail;
|
|
unsigned int tx_head;
|
|
unsigned int tx_tail;
|
|
|
|
void *rx_buffer;
|
|
void *tx_buffer;
|
|
struct macb_dma_desc *rx_ring;
|
|
struct macb_dma_desc *tx_ring;
|
|
|
|
unsigned long rx_buffer_dma;
|
|
unsigned long rx_ring_dma;
|
|
unsigned long tx_ring_dma;
|
|
|
|
const struct device *dev;
|
|
struct eth_device netdev;
|
|
unsigned short phy_addr;
|
|
};
|
|
#define to_macb(_nd) container_of(_nd, struct macb_device, netdev)
|
|
|
|
static void macb_mdio_write(struct macb_device *macb, u8 reg, u16 value)
|
|
{
|
|
unsigned long netctl;
|
|
unsigned long netstat;
|
|
unsigned long frame;
|
|
|
|
netctl = macb_readl(macb, NCR);
|
|
netctl |= MACB_BIT(MPE);
|
|
macb_writel(macb, NCR, netctl);
|
|
|
|
frame = (MACB_BF(SOF, 1)
|
|
| MACB_BF(RW, 1)
|
|
| MACB_BF(PHYA, macb->phy_addr)
|
|
| MACB_BF(REGA, reg)
|
|
| MACB_BF(CODE, 2)
|
|
| MACB_BF(DATA, value));
|
|
macb_writel(macb, MAN, frame);
|
|
|
|
do {
|
|
netstat = macb_readl(macb, NSR);
|
|
} while (!(netstat & MACB_BIT(IDLE)));
|
|
|
|
netctl = macb_readl(macb, NCR);
|
|
netctl &= ~MACB_BIT(MPE);
|
|
macb_writel(macb, NCR, netctl);
|
|
}
|
|
|
|
static u16 macb_mdio_read(struct macb_device *macb, u8 reg)
|
|
{
|
|
unsigned long netctl;
|
|
unsigned long netstat;
|
|
unsigned long frame;
|
|
|
|
netctl = macb_readl(macb, NCR);
|
|
netctl |= MACB_BIT(MPE);
|
|
macb_writel(macb, NCR, netctl);
|
|
|
|
frame = (MACB_BF(SOF, 1)
|
|
| MACB_BF(RW, 2)
|
|
| MACB_BF(PHYA, macb->phy_addr)
|
|
| MACB_BF(REGA, reg)
|
|
| MACB_BF(CODE, 2));
|
|
macb_writel(macb, MAN, frame);
|
|
|
|
do {
|
|
netstat = macb_readl(macb, NSR);
|
|
} while (!(netstat & MACB_BIT(IDLE)));
|
|
|
|
frame = macb_readl(macb, MAN);
|
|
|
|
netctl = macb_readl(macb, NCR);
|
|
netctl &= ~MACB_BIT(MPE);
|
|
macb_writel(macb, NCR, netctl);
|
|
|
|
return MACB_BFEXT(DATA, frame);
|
|
}
|
|
|
|
#if defined(CONFIG_CMD_MII)
|
|
|
|
int macb_miiphy_read(const char *devname, u8 phy_adr, u8 reg, u16 *value)
|
|
{
|
|
struct eth_device *dev = eth_get_dev_by_name(devname);
|
|
struct macb_device *macb = to_macb(dev);
|
|
|
|
if ( macb->phy_addr != phy_adr )
|
|
return -1;
|
|
|
|
*value = macb_mdio_read(macb, reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int macb_miiphy_write(const char *devname, u8 phy_adr, u8 reg, u16 value)
|
|
{
|
|
struct eth_device *dev = eth_get_dev_by_name(devname);
|
|
struct macb_device *macb = to_macb(dev);
|
|
|
|
if ( macb->phy_addr != phy_adr )
|
|
return -1;
|
|
|
|
macb_mdio_write(macb, reg, value);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
|
|
#if defined(CONFIG_CMD_NET)
|
|
|
|
static int macb_send(struct eth_device *netdev, volatile void *packet,
|
|
int length)
|
|
{
|
|
struct macb_device *macb = to_macb(netdev);
|
|
unsigned long paddr, ctrl;
|
|
unsigned int tx_head = macb->tx_head;
|
|
int i;
|
|
|
|
paddr = dma_map_single(packet, length, DMA_TO_DEVICE);
|
|
|
|
ctrl = length & TXBUF_FRMLEN_MASK;
|
|
ctrl |= TXBUF_FRAME_END;
|
|
if (tx_head == (CONFIG_SYS_MACB_TX_RING_SIZE - 1)) {
|
|
ctrl |= TXBUF_WRAP;
|
|
macb->tx_head = 0;
|
|
} else
|
|
macb->tx_head++;
|
|
|
|
macb->tx_ring[tx_head].ctrl = ctrl;
|
|
macb->tx_ring[tx_head].addr = paddr;
|
|
barrier();
|
|
macb_writel(macb, NCR, MACB_BIT(TE) | MACB_BIT(RE) | MACB_BIT(TSTART));
|
|
|
|
/*
|
|
* I guess this is necessary because the networking core may
|
|
* re-use the transmit buffer as soon as we return...
|
|
*/
|
|
for (i = 0; i <= CONFIG_SYS_MACB_TX_TIMEOUT; i++) {
|
|
barrier();
|
|
ctrl = macb->tx_ring[tx_head].ctrl;
|
|
if (ctrl & TXBUF_USED)
|
|
break;
|
|
udelay(1);
|
|
}
|
|
|
|
dma_unmap_single(packet, length, paddr);
|
|
|
|
if (i <= CONFIG_SYS_MACB_TX_TIMEOUT) {
|
|
if (ctrl & TXBUF_UNDERRUN)
|
|
printf("%s: TX underrun\n", netdev->name);
|
|
if (ctrl & TXBUF_EXHAUSTED)
|
|
printf("%s: TX buffers exhausted in mid frame\n",
|
|
netdev->name);
|
|
} else {
|
|
printf("%s: TX timeout\n", netdev->name);
|
|
}
|
|
|
|
/* No one cares anyway */
|
|
return 0;
|
|
}
|
|
|
|
static void reclaim_rx_buffers(struct macb_device *macb,
|
|
unsigned int new_tail)
|
|
{
|
|
unsigned int i;
|
|
|
|
i = macb->rx_tail;
|
|
while (i > new_tail) {
|
|
macb->rx_ring[i].addr &= ~RXADDR_USED;
|
|
i++;
|
|
if (i > CONFIG_SYS_MACB_RX_RING_SIZE)
|
|
i = 0;
|
|
}
|
|
|
|
while (i < new_tail) {
|
|
macb->rx_ring[i].addr &= ~RXADDR_USED;
|
|
i++;
|
|
}
|
|
|
|
barrier();
|
|
macb->rx_tail = new_tail;
|
|
}
|
|
|
|
static int macb_recv(struct eth_device *netdev)
|
|
{
|
|
struct macb_device *macb = to_macb(netdev);
|
|
unsigned int rx_tail = macb->rx_tail;
|
|
void *buffer;
|
|
int length;
|
|
int wrapped = 0;
|
|
u32 status;
|
|
|
|
for (;;) {
|
|
if (!(macb->rx_ring[rx_tail].addr & RXADDR_USED))
|
|
return -1;
|
|
|
|
status = macb->rx_ring[rx_tail].ctrl;
|
|
if (status & RXBUF_FRAME_START) {
|
|
if (rx_tail != macb->rx_tail)
|
|
reclaim_rx_buffers(macb, rx_tail);
|
|
wrapped = 0;
|
|
}
|
|
|
|
if (status & RXBUF_FRAME_END) {
|
|
buffer = macb->rx_buffer + 128 * macb->rx_tail;
|
|
length = status & RXBUF_FRMLEN_MASK;
|
|
if (wrapped) {
|
|
unsigned int headlen, taillen;
|
|
|
|
headlen = 128 * (CONFIG_SYS_MACB_RX_RING_SIZE
|
|
- macb->rx_tail);
|
|
taillen = length - headlen;
|
|
memcpy((void *)NetRxPackets[0],
|
|
buffer, headlen);
|
|
memcpy((void *)NetRxPackets[0] + headlen,
|
|
macb->rx_buffer, taillen);
|
|
buffer = (void *)NetRxPackets[0];
|
|
}
|
|
|
|
NetReceive(buffer, length);
|
|
if (++rx_tail >= CONFIG_SYS_MACB_RX_RING_SIZE)
|
|
rx_tail = 0;
|
|
reclaim_rx_buffers(macb, rx_tail);
|
|
} else {
|
|
if (++rx_tail >= CONFIG_SYS_MACB_RX_RING_SIZE) {
|
|
wrapped = 1;
|
|
rx_tail = 0;
|
|
}
|
|
}
|
|
barrier();
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void macb_phy_reset(struct macb_device *macb)
|
|
{
|
|
struct eth_device *netdev = &macb->netdev;
|
|
int i;
|
|
u16 status, adv;
|
|
|
|
adv = ADVERTISE_CSMA | ADVERTISE_ALL;
|
|
macb_mdio_write(macb, MII_ADVERTISE, adv);
|
|
printf("%s: Starting autonegotiation...\n", netdev->name);
|
|
macb_mdio_write(macb, MII_BMCR, (BMCR_ANENABLE
|
|
| BMCR_ANRESTART));
|
|
|
|
for (i = 0; i < CONFIG_SYS_MACB_AUTONEG_TIMEOUT / 100; i++) {
|
|
status = macb_mdio_read(macb, MII_BMSR);
|
|
if (status & BMSR_ANEGCOMPLETE)
|
|
break;
|
|
udelay(100);
|
|
}
|
|
|
|
if (status & BMSR_ANEGCOMPLETE)
|
|
printf("%s: Autonegotiation complete\n", netdev->name);
|
|
else
|
|
printf("%s: Autonegotiation timed out (status=0x%04x)\n",
|
|
netdev->name, status);
|
|
}
|
|
|
|
#ifdef CONFIG_MACB_SEARCH_PHY
|
|
static int macb_phy_find(struct macb_device *macb)
|
|
{
|
|
int i;
|
|
u16 phy_id;
|
|
|
|
/* Search for PHY... */
|
|
for (i = 0; i < 32; i++) {
|
|
macb->phy_addr = i;
|
|
phy_id = macb_mdio_read(macb, MII_PHYSID1);
|
|
if (phy_id != 0xffff) {
|
|
printf("%s: PHY present at %d\n", macb->netdev.name, i);
|
|
return 1;
|
|
}
|
|
}
|
|
|
|
/* PHY isn't up to snuff */
|
|
printf("%s: PHY not found", macb->netdev.name);
|
|
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_MACB_SEARCH_PHY */
|
|
|
|
|
|
static int macb_phy_init(struct macb_device *macb)
|
|
{
|
|
struct eth_device *netdev = &macb->netdev;
|
|
u32 ncfgr;
|
|
u16 phy_id, status, adv, lpa;
|
|
int media, speed, duplex;
|
|
int i;
|
|
|
|
#ifdef CONFIG_MACB_SEARCH_PHY
|
|
/* Auto-detect phy_addr */
|
|
if (!macb_phy_find(macb)) {
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_MACB_SEARCH_PHY */
|
|
|
|
/* Check if the PHY is up to snuff... */
|
|
phy_id = macb_mdio_read(macb, MII_PHYSID1);
|
|
if (phy_id == 0xffff) {
|
|
printf("%s: No PHY present\n", netdev->name);
|
|
return 0;
|
|
}
|
|
|
|
status = macb_mdio_read(macb, MII_BMSR);
|
|
if (!(status & BMSR_LSTATUS)) {
|
|
/* Try to re-negotiate if we don't have link already. */
|
|
macb_phy_reset(macb);
|
|
|
|
for (i = 0; i < CONFIG_SYS_MACB_AUTONEG_TIMEOUT / 100; i++) {
|
|
status = macb_mdio_read(macb, MII_BMSR);
|
|
if (status & BMSR_LSTATUS)
|
|
break;
|
|
udelay(100);
|
|
}
|
|
}
|
|
|
|
if (!(status & BMSR_LSTATUS)) {
|
|
printf("%s: link down (status: 0x%04x)\n",
|
|
netdev->name, status);
|
|
return 0;
|
|
} else {
|
|
adv = macb_mdio_read(macb, MII_ADVERTISE);
|
|
lpa = macb_mdio_read(macb, MII_LPA);
|
|
media = mii_nway_result(lpa & adv);
|
|
speed = (media & (ADVERTISE_100FULL | ADVERTISE_100HALF)
|
|
? 1 : 0);
|
|
duplex = (media & ADVERTISE_FULL) ? 1 : 0;
|
|
printf("%s: link up, %sMbps %s-duplex (lpa: 0x%04x)\n",
|
|
netdev->name,
|
|
speed ? "100" : "10",
|
|
duplex ? "full" : "half",
|
|
lpa);
|
|
|
|
ncfgr = macb_readl(macb, NCFGR);
|
|
ncfgr &= ~(MACB_BIT(SPD) | MACB_BIT(FD));
|
|
if (speed)
|
|
ncfgr |= MACB_BIT(SPD);
|
|
if (duplex)
|
|
ncfgr |= MACB_BIT(FD);
|
|
macb_writel(macb, NCFGR, ncfgr);
|
|
return 1;
|
|
}
|
|
}
|
|
|
|
static int macb_init(struct eth_device *netdev, bd_t *bd)
|
|
{
|
|
struct macb_device *macb = to_macb(netdev);
|
|
unsigned long paddr;
|
|
int i;
|
|
|
|
/*
|
|
* macb_halt should have been called at some point before now,
|
|
* so we'll assume the controller is idle.
|
|
*/
|
|
|
|
/* initialize DMA descriptors */
|
|
paddr = macb->rx_buffer_dma;
|
|
for (i = 0; i < CONFIG_SYS_MACB_RX_RING_SIZE; i++) {
|
|
if (i == (CONFIG_SYS_MACB_RX_RING_SIZE - 1))
|
|
paddr |= RXADDR_WRAP;
|
|
macb->rx_ring[i].addr = paddr;
|
|
macb->rx_ring[i].ctrl = 0;
|
|
paddr += 128;
|
|
}
|
|
for (i = 0; i < CONFIG_SYS_MACB_TX_RING_SIZE; i++) {
|
|
macb->tx_ring[i].addr = 0;
|
|
if (i == (CONFIG_SYS_MACB_TX_RING_SIZE - 1))
|
|
macb->tx_ring[i].ctrl = TXBUF_USED | TXBUF_WRAP;
|
|
else
|
|
macb->tx_ring[i].ctrl = TXBUF_USED;
|
|
}
|
|
macb->rx_tail = macb->tx_head = macb->tx_tail = 0;
|
|
|
|
macb_writel(macb, RBQP, macb->rx_ring_dma);
|
|
macb_writel(macb, TBQP, macb->tx_ring_dma);
|
|
|
|
/* choose RMII or MII mode. This depends on the board */
|
|
#ifdef CONFIG_RMII
|
|
#if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \
|
|
defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91SAM9G20) || \
|
|
defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) || \
|
|
defined(CONFIG_AT91SAM9XE)
|
|
macb_writel(macb, USRIO, MACB_BIT(RMII) | MACB_BIT(CLKEN));
|
|
#else
|
|
macb_writel(macb, USRIO, 0);
|
|
#endif
|
|
#else
|
|
#if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \
|
|
defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91SAM9G20) || \
|
|
defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) || \
|
|
defined(CONFIG_AT91SAM9XE)
|
|
macb_writel(macb, USRIO, MACB_BIT(CLKEN));
|
|
#else
|
|
macb_writel(macb, USRIO, MACB_BIT(MII));
|
|
#endif
|
|
#endif /* CONFIG_RMII */
|
|
|
|
if (!macb_phy_init(macb))
|
|
return -1;
|
|
|
|
/* Enable TX and RX */
|
|
macb_writel(macb, NCR, MACB_BIT(TE) | MACB_BIT(RE));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void macb_halt(struct eth_device *netdev)
|
|
{
|
|
struct macb_device *macb = to_macb(netdev);
|
|
u32 ncr, tsr;
|
|
|
|
/* Halt the controller and wait for any ongoing transmission to end. */
|
|
ncr = macb_readl(macb, NCR);
|
|
ncr |= MACB_BIT(THALT);
|
|
macb_writel(macb, NCR, ncr);
|
|
|
|
do {
|
|
tsr = macb_readl(macb, TSR);
|
|
} while (tsr & MACB_BIT(TGO));
|
|
|
|
/* Disable TX and RX, and clear statistics */
|
|
macb_writel(macb, NCR, MACB_BIT(CLRSTAT));
|
|
}
|
|
|
|
static int macb_write_hwaddr(struct eth_device *dev)
|
|
{
|
|
struct macb_device *macb = to_macb(dev);
|
|
u32 hwaddr_bottom;
|
|
u16 hwaddr_top;
|
|
|
|
/* set hardware address */
|
|
hwaddr_bottom = dev->enetaddr[0] | dev->enetaddr[1] << 8 |
|
|
dev->enetaddr[2] << 16 | dev->enetaddr[3] << 24;
|
|
macb_writel(macb, SA1B, hwaddr_bottom);
|
|
hwaddr_top = dev->enetaddr[4] | dev->enetaddr[5] << 8;
|
|
macb_writel(macb, SA1T, hwaddr_top);
|
|
return 0;
|
|
}
|
|
|
|
int macb_eth_initialize(int id, void *regs, unsigned int phy_addr)
|
|
{
|
|
struct macb_device *macb;
|
|
struct eth_device *netdev;
|
|
unsigned long macb_hz;
|
|
u32 ncfgr;
|
|
|
|
macb = malloc(sizeof(struct macb_device));
|
|
if (!macb) {
|
|
printf("Error: Failed to allocate memory for MACB%d\n", id);
|
|
return -1;
|
|
}
|
|
memset(macb, 0, sizeof(struct macb_device));
|
|
|
|
netdev = &macb->netdev;
|
|
|
|
macb->rx_buffer = dma_alloc_coherent(CONFIG_SYS_MACB_RX_BUFFER_SIZE,
|
|
&macb->rx_buffer_dma);
|
|
macb->rx_ring = dma_alloc_coherent(CONFIG_SYS_MACB_RX_RING_SIZE
|
|
* sizeof(struct macb_dma_desc),
|
|
&macb->rx_ring_dma);
|
|
macb->tx_ring = dma_alloc_coherent(CONFIG_SYS_MACB_TX_RING_SIZE
|
|
* sizeof(struct macb_dma_desc),
|
|
&macb->tx_ring_dma);
|
|
|
|
macb->regs = regs;
|
|
macb->phy_addr = phy_addr;
|
|
|
|
sprintf(netdev->name, "macb%d", id);
|
|
netdev->init = macb_init;
|
|
netdev->halt = macb_halt;
|
|
netdev->send = macb_send;
|
|
netdev->recv = macb_recv;
|
|
netdev->write_hwaddr = macb_write_hwaddr;
|
|
|
|
/*
|
|
* Do some basic initialization so that we at least can talk
|
|
* to the PHY
|
|
*/
|
|
macb_hz = get_macb_pclk_rate(id);
|
|
if (macb_hz < 20000000)
|
|
ncfgr = MACB_BF(CLK, MACB_CLK_DIV8);
|
|
else if (macb_hz < 40000000)
|
|
ncfgr = MACB_BF(CLK, MACB_CLK_DIV16);
|
|
else if (macb_hz < 80000000)
|
|
ncfgr = MACB_BF(CLK, MACB_CLK_DIV32);
|
|
else
|
|
ncfgr = MACB_BF(CLK, MACB_CLK_DIV64);
|
|
|
|
macb_writel(macb, NCFGR, ncfgr);
|
|
|
|
eth_register(netdev);
|
|
|
|
#if defined(CONFIG_CMD_MII)
|
|
miiphy_register(netdev->name, macb_miiphy_read, macb_miiphy_write);
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
#endif
|
|
|