upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
353 lines
9.3 KiB
353 lines
9.3 KiB
/*
|
|
* (C) Copyright 2000, 2001
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <config.h>
|
|
#include <command.h>
|
|
#include <i2c.h>
|
|
|
|
#if (CONFIG_COMMANDS & CFG_CMD_EEPROM) || defined(CFG_ENV_IS_IN_EEPROM)
|
|
|
|
extern void eeprom_init (void);
|
|
extern int eeprom_read (unsigned dev_addr, unsigned offset,
|
|
uchar *buffer, unsigned cnt);
|
|
extern int eeprom_write (unsigned dev_addr, unsigned offset,
|
|
uchar *buffer, unsigned cnt);
|
|
#endif
|
|
|
|
|
|
#if defined(CFG_EEPROM_X40430)
|
|
/* Maximum number of times to poll for acknowledge after write */
|
|
#define MAX_ACKNOWLEDGE_POLLS 10
|
|
#endif
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
#if (CONFIG_COMMANDS & CFG_CMD_EEPROM)
|
|
int do_eeprom ( cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
|
|
{
|
|
const char *const fmt =
|
|
"\nEEPROM @0x%lX %s: addr %08lx off %04lx count %ld ... ";
|
|
|
|
#if defined(CFG_I2C_MULTI_EEPROMS)
|
|
if (argc == 6) {
|
|
ulong dev_addr = simple_strtoul (argv[2], NULL, 16);
|
|
ulong addr = simple_strtoul (argv[3], NULL, 16);
|
|
ulong off = simple_strtoul (argv[4], NULL, 16);
|
|
ulong cnt = simple_strtoul (argv[5], NULL, 16);
|
|
#else
|
|
if (argc == 5) {
|
|
ulong dev_addr = CFG_DEF_EEPROM_ADDR;
|
|
ulong addr = simple_strtoul (argv[2], NULL, 16);
|
|
ulong off = simple_strtoul (argv[3], NULL, 16);
|
|
ulong cnt = simple_strtoul (argv[4], NULL, 16);
|
|
#endif /* CFG_I2C_MULTI_EEPROMS */
|
|
|
|
# ifndef CONFIG_SPI
|
|
eeprom_init ();
|
|
# endif /* !CONFIG_SPI */
|
|
|
|
if (strcmp (argv[1], "read") == 0) {
|
|
int rcode;
|
|
|
|
printf (fmt, dev_addr, argv[1], addr, off, cnt);
|
|
|
|
rcode = eeprom_read (dev_addr, off, (uchar *) addr, cnt);
|
|
|
|
printf ("done\n");
|
|
return rcode;
|
|
} else if (strcmp (argv[1], "write") == 0) {
|
|
int rcode;
|
|
|
|
printf (fmt, dev_addr, argv[1], addr, off, cnt);
|
|
|
|
rcode = eeprom_write (dev_addr, off, (uchar *) addr, cnt);
|
|
|
|
printf ("done\n");
|
|
return rcode;
|
|
}
|
|
}
|
|
|
|
printf ("Usage:\n%s\n", cmdtp->usage);
|
|
return 1;
|
|
}
|
|
#endif /* CFG_CMD_EEPROM */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
*
|
|
* for CFG_I2C_EEPROM_ADDR_LEN == 2 (16-bit EEPROM address) offset is
|
|
* 0x000nxxxx for EEPROM address selectors at n, offset xxxx in EEPROM.
|
|
*
|
|
* for CFG_I2C_EEPROM_ADDR_LEN == 1 (8-bit EEPROM page address) offset is
|
|
* 0x00000nxx for EEPROM address selectors and page number at n.
|
|
*/
|
|
|
|
#if (CONFIG_COMMANDS & CFG_CMD_EEPROM) || defined(CFG_ENV_IS_IN_EEPROM)
|
|
|
|
#ifndef CONFIG_SPI
|
|
#if !defined(CFG_I2C_EEPROM_ADDR_LEN) || CFG_I2C_EEPROM_ADDR_LEN < 1 || CFG_I2C_EEPROM_ADDR_LEN > 2
|
|
#error CFG_I2C_EEPROM_ADDR_LEN must be 1 or 2
|
|
#endif
|
|
#endif
|
|
|
|
int eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt)
|
|
{
|
|
unsigned end = offset + cnt;
|
|
unsigned blk_off;
|
|
int rcode = 0;
|
|
|
|
/* Read data until done or would cross a page boundary.
|
|
* We must write the address again when changing pages
|
|
* because the next page may be in a different device.
|
|
*/
|
|
while (offset < end) {
|
|
unsigned alen, len, maxlen;
|
|
#if CFG_I2C_EEPROM_ADDR_LEN == 1 && !defined(CONFIG_SPI_X)
|
|
uchar addr[2];
|
|
|
|
blk_off = offset & 0xFF; /* block offset */
|
|
|
|
addr[0] = offset >> 8; /* block number */
|
|
addr[1] = blk_off; /* block offset */
|
|
alen = 2;
|
|
#else
|
|
uchar addr[3];
|
|
|
|
blk_off = offset & 0xFF; /* block offset */
|
|
|
|
addr[0] = offset >> 16; /* block number */
|
|
addr[1] = offset >> 8; /* upper address octet */
|
|
addr[2] = blk_off; /* lower address octet */
|
|
alen = 3;
|
|
#endif /* CFG_I2C_EEPROM_ADDR_LEN, CONFIG_SPI_X */
|
|
|
|
addr[0] |= dev_addr; /* insert device address */
|
|
|
|
maxlen = 0x100 - blk_off;
|
|
if (maxlen > I2C_RXTX_LEN)
|
|
maxlen = I2C_RXTX_LEN;
|
|
len = end - offset;
|
|
if (len > maxlen)
|
|
len = maxlen;
|
|
#ifdef CONFIG_SPI
|
|
spi_read (addr, alen, buffer, len);
|
|
#else
|
|
if (i2c_read (addr[0], offset, alen-1, buffer, len) != 0)
|
|
rcode = 1;
|
|
#endif
|
|
buffer += len;
|
|
offset += len;
|
|
}
|
|
return rcode;
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
*
|
|
* for CFG_I2C_EEPROM_ADDR_LEN == 2 (16-bit EEPROM address) offset is
|
|
* 0x000nxxxx for EEPROM address selectors at n, offset xxxx in EEPROM.
|
|
*
|
|
* for CFG_I2C_EEPROM_ADDR_LEN == 1 (8-bit EEPROM page address) offset is
|
|
* 0x00000nxx for EEPROM address selectors and page number at n.
|
|
*/
|
|
|
|
int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt)
|
|
{
|
|
unsigned end = offset + cnt;
|
|
unsigned blk_off;
|
|
int rcode = 0;
|
|
|
|
#if defined(CFG_EEPROM_X40430)
|
|
uchar contr_r_addr[2];
|
|
uchar addr_void[2];
|
|
uchar contr_reg[2];
|
|
uchar ctrl_reg_v;
|
|
int i;
|
|
#endif
|
|
|
|
/* Write data until done or would cross a write page boundary.
|
|
* We must write the address again when changing pages
|
|
* because the address counter only increments within a page.
|
|
*/
|
|
|
|
while (offset < end) {
|
|
unsigned alen, len, maxlen;
|
|
#if CFG_I2C_EEPROM_ADDR_LEN == 1 && !defined(CONFIG_SPI_X)
|
|
uchar addr[2];
|
|
|
|
blk_off = offset & 0xFF; /* block offset */
|
|
|
|
addr[0] = offset >> 8; /* block number */
|
|
addr[1] = blk_off; /* block offset */
|
|
alen = 2;
|
|
#else
|
|
uchar addr[3];
|
|
|
|
blk_off = offset & 0xFF; /* block offset */
|
|
|
|
addr[0] = offset >> 16; /* block number */
|
|
addr[1] = offset >> 8; /* upper address octet */
|
|
addr[2] = blk_off; /* lower address octet */
|
|
alen = 3;
|
|
#endif /* CFG_I2C_EEPROM_ADDR_LEN, CONFIG_SPI_X */
|
|
|
|
addr[0] |= dev_addr; /* insert device address */
|
|
|
|
#if defined(CFG_EEPROM_PAGE_WRITE_BITS)
|
|
|
|
#define EEPROM_PAGE_SIZE (1 << CFG_EEPROM_PAGE_WRITE_BITS)
|
|
#define EEPROM_PAGE_OFFSET(x) ((x) & (EEPROM_PAGE_SIZE - 1))
|
|
|
|
maxlen = EEPROM_PAGE_SIZE - EEPROM_PAGE_OFFSET(blk_off);
|
|
#else
|
|
maxlen = 0x100 - blk_off;
|
|
#endif
|
|
if (maxlen > I2C_RXTX_LEN)
|
|
maxlen = I2C_RXTX_LEN;
|
|
|
|
len = end - offset;
|
|
if (len > maxlen)
|
|
len = maxlen;
|
|
#ifdef CONFIG_SPI
|
|
spi_write (addr, alen, buffer, len);
|
|
#else
|
|
#if defined(CFG_EEPROM_X40430)
|
|
/* Get the value of the control register.
|
|
* Set current address (internal pointer in the x40430)
|
|
* to 0x1ff.
|
|
*/
|
|
contr_r_addr[0] = 9;
|
|
contr_r_addr[1] = 0xff;
|
|
addr_void[0] = 0;
|
|
addr_void[1] = addr[1];
|
|
#ifdef CFG_I2C_EEPROM_ADDR
|
|
contr_r_addr[0] |= CFG_I2C_EEPROM_ADDR;
|
|
addr_void[0] |= CFG_I2C_EEPROM_ADDR;
|
|
#endif
|
|
contr_reg[0] = 0xff;
|
|
if (i2c_read (contr_r_addr[0], contr_r_addr[1], 1, contr_reg, 1) != 0) {
|
|
rcode = 1;
|
|
}
|
|
ctrl_reg_v = contr_reg[0];
|
|
|
|
/* Are any of the eeprom blocks write protected?
|
|
*/
|
|
if (ctrl_reg_v & 0x18) {
|
|
ctrl_reg_v &= ~0x18; /* reset block protect bits */
|
|
ctrl_reg_v |= 0x02; /* set write enable latch */
|
|
ctrl_reg_v &= ~0x04; /* clear RWEL */
|
|
|
|
/* Set write enable latch.
|
|
*/
|
|
contr_reg[0] = 0x02;
|
|
if (i2c_write (contr_r_addr[0], 0xff, 1, contr_reg, 1) != 0) {
|
|
rcode = 1;
|
|
}
|
|
|
|
/* Set register write enable latch.
|
|
*/
|
|
contr_reg[0] = 0x06;
|
|
if (i2c_write (contr_r_addr[0], 0xFF, 1, contr_reg, 1) != 0) {
|
|
rcode = 1;
|
|
}
|
|
|
|
/* Modify ctrl register.
|
|
*/
|
|
contr_reg[0] = ctrl_reg_v;
|
|
if (i2c_write (contr_r_addr[0], 0xFF, 1, contr_reg, 1) != 0) {
|
|
rcode = 1;
|
|
}
|
|
|
|
/* The write (above) is an operation on NV memory.
|
|
* These can take some time (~5ms), and the device
|
|
* will not respond to further I2C messages till
|
|
* it's completed the write.
|
|
* So poll device for an I2C acknowledge.
|
|
* When we get one we know we can continue with other
|
|
* operations.
|
|
*/
|
|
contr_reg[0] = 0;
|
|
for (i = 0; i < MAX_ACKNOWLEDGE_POLLS; i++) {
|
|
if (i2c_read (addr_void[0], addr_void[1], 1, contr_reg, 1) == 1)
|
|
break; /* got ack */
|
|
#if defined(CFG_EEPROM_PAGE_WRITE_DELAY_MS)
|
|
udelay(CFG_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
|
|
#endif
|
|
}
|
|
if (i == MAX_ACKNOWLEDGE_POLLS) {
|
|
printf("EEPROM poll acknowledge failed\n");
|
|
rcode = 1;
|
|
}
|
|
}
|
|
|
|
/* Is the write enable latch on?.
|
|
*/
|
|
else if (!(ctrl_reg_v & 0x02)) {
|
|
/* Set write enable latch.
|
|
*/
|
|
contr_reg[0] = 0x02;
|
|
if (i2c_write (contr_r_addr[0], 0xFF, 1, contr_reg, 1) != 0) {
|
|
rcode = 1;
|
|
}
|
|
}
|
|
/* Write is enabled ... now write eeprom value.
|
|
*/
|
|
#endif
|
|
if (i2c_write (addr[0], offset, alen-1, buffer, len) != 0)
|
|
rcode = 1;
|
|
|
|
#endif
|
|
buffer += len;
|
|
offset += len;
|
|
|
|
#if defined(CFG_EEPROM_PAGE_WRITE_DELAY_MS)
|
|
udelay(CFG_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
|
|
#endif
|
|
}
|
|
return rcode;
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Set default values
|
|
*/
|
|
#ifndef CFG_I2C_SPEED
|
|
#define CFG_I2C_SPEED 50000
|
|
#endif
|
|
|
|
#ifndef CFG_I2C_SLAVE
|
|
#define CFG_I2C_SLAVE 0xFE
|
|
#endif
|
|
|
|
void eeprom_init (void)
|
|
{
|
|
#if defined(CONFIG_SPI)
|
|
spi_init_f ();
|
|
#endif
|
|
#if defined(CONFIG_HARD_I2C) || \
|
|
defined(CONFIG_SOFT_I2C)
|
|
i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
|
|
#endif
|
|
}
|
|
/*-----------------------------------------------------------------------
|
|
*/
|
|
#endif /* CFG_CMD_EEPROM */
|
|
|