upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
96 lines
2.6 KiB
96 lines
2.6 KiB
/*
|
|
* SoC-specific code for tms320dm644x chips
|
|
*
|
|
* Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
|
|
* Copyright (C) 2008 Lyrtech <www.lyrtech.com>
|
|
* Copyright (C) 2004 Texas Instruments.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/arch/hardware.h>
|
|
|
|
|
|
#define PINMUX0_EMACEN (1 << 31)
|
|
#define PINMUX0_AECS5 (1 << 11)
|
|
#define PINMUX0_AECS4 (1 << 10)
|
|
|
|
#define PINMUX1_I2C (1 << 7)
|
|
#define PINMUX1_UART1 (1 << 1)
|
|
#define PINMUX1_UART0 (1 << 0)
|
|
|
|
|
|
void davinci_enable_uart0(void)
|
|
{
|
|
lpsc_on(DAVINCI_LPSC_UART0);
|
|
|
|
/* Bringup UART0 out of reset */
|
|
REG(UART0_PWREMU_MGMT) = 0x00006001;
|
|
|
|
/* Enable UART0 MUX lines */
|
|
REG(PINMUX1) |= PINMUX1_UART0;
|
|
}
|
|
|
|
#ifdef CONFIG_DRIVER_TI_EMAC
|
|
void davinci_enable_emac(void)
|
|
{
|
|
lpsc_on(DAVINCI_LPSC_EMAC);
|
|
lpsc_on(DAVINCI_LPSC_EMAC_WRAPPER);
|
|
lpsc_on(DAVINCI_LPSC_MDIO);
|
|
|
|
/* Enable GIO3.3V cells used for EMAC */
|
|
REG(VDD3P3V_PWDN) = 0;
|
|
|
|
/* Enable EMAC. */
|
|
REG(PINMUX0) |= PINMUX0_EMACEN;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_DRIVER_DAVINCI_I2C
|
|
void davinci_enable_i2c(void)
|
|
{
|
|
lpsc_on(DAVINCI_LPSC_I2C);
|
|
|
|
/* Enable I2C pin Mux */
|
|
REG(PINMUX1) |= PINMUX1_I2C;
|
|
}
|
|
#endif
|
|
|
|
void davinci_errata_workarounds(void)
|
|
{
|
|
/*
|
|
* Workaround for TMS320DM6446 errata 1.3.22:
|
|
* PSC: PTSTAT Register Does Not Clear After Warm/Maximum Reset
|
|
* Revision(s) Affected: 1.3 and earlier
|
|
*/
|
|
REG(PSC_SILVER_BULLET) = 0;
|
|
|
|
/*
|
|
* Set the PR_OLD_COUNT bits in the Bus Burst Priority Register (PBBPR)
|
|
* as suggested in TMS320DM6446 errata 2.1.2:
|
|
*
|
|
* On DM6446 Silicon Revision 2.1 and earlier, under certain conditions
|
|
* low priority modules can occupy the bus and prevent high priority
|
|
* modules like the VPSS from getting the required DDR2 throughput.
|
|
* A hex value of 0x20 should provide a good ARM (cache enabled)
|
|
* performance and still allow good utilization by the VPSS or other
|
|
* modules.
|
|
*/
|
|
REG(VBPR) = 0x20;
|
|
}
|
|
|