upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
 
 
 
 
 
 
u-boot/board/xes/common/actl_nand.c

65 lines
1.8 KiB

/*
* Copyright 2008 Extreme Engineering Solutions, Inc.
*
* This driver support NAND devices which have address lines
* connected as ALE and CLE inputs.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <nand.h>
#include <asm/io.h>
/*
* Hardware specific access to control-lines
*/
static void nand_addr_hwcontrol(struct mtd_info *mtd, int cmd, uint ctrl)
{
struct nand_chip *this = mtd->priv;
ulong IO_ADDR_W;
if (ctrl & NAND_CTRL_CHANGE) {
IO_ADDR_W = (ulong)this->IO_ADDR_W;
IO_ADDR_W &= ~(CONFIG_SYS_NAND_ACTL_CLE |
CONFIG_SYS_NAND_ACTL_ALE |
CONFIG_SYS_NAND_ACTL_NCE);
if (ctrl & NAND_CLE)
IO_ADDR_W |= CONFIG_SYS_NAND_ACTL_CLE;
if (ctrl & NAND_ALE)
IO_ADDR_W |= CONFIG_SYS_NAND_ACTL_ALE;
if (ctrl & NAND_NCE)
IO_ADDR_W |= CONFIG_SYS_NAND_ACTL_NCE;
this->IO_ADDR_W = (void *)IO_ADDR_W;
}
if (cmd != NAND_CMD_NONE)
writeb(cmd, this->IO_ADDR_W);
}
int board_nand_init(struct nand_chip *nand)
{
nand->ecc.mode = NAND_ECC_SOFT;
nand->cmd_ctrl = nand_addr_hwcontrol;
nand->chip_delay = CONFIG_SYS_NAND_ACTL_DELAY;
return 0;
}