upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
385 lines
9.4 KiB
385 lines
9.4 KiB
/*
|
|
* (C) Copyright 2001-2004
|
|
* Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/processor.h>
|
|
#include <command.h>
|
|
#include <malloc.h>
|
|
#include <pci.h>
|
|
#include <asm/4xx_pci.h>
|
|
#include <asm/io.h>
|
|
|
|
#include "pci405.h"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
/* Prototypes */
|
|
int gunzip(void *, int, unsigned char *, unsigned long *);
|
|
int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
|
|
unsigned long fpga_done_state(void);
|
|
unsigned long fpga_init_state(void);
|
|
|
|
#if 0
|
|
#define FPGA_DEBUG
|
|
#endif
|
|
|
|
/* predefine these here */
|
|
#define FPGA_DONE_STATE (fpga_done_state())
|
|
#define FPGA_INIT_STATE (fpga_init_state())
|
|
|
|
/* fpga configuration data - generated by bin2cc */
|
|
const unsigned char fpgadata[] =
|
|
{
|
|
#include "fpgadata.c"
|
|
};
|
|
|
|
/*
|
|
* include common fpga code (for esd boards)
|
|
*/
|
|
#include "../common/fpga.c"
|
|
|
|
#define FPGA_DONE_STATE_V11 (in_be32((void*)GPIO0_IR) & CONFIG_SYS_FPGA_DONE)
|
|
#define FPGA_DONE_STATE_V12 (in_be32((void*)GPIO0_IR) & CONFIG_SYS_FPGA_DONE_V12)
|
|
|
|
#define FPGA_INIT_STATE_V11 (in_be32((void*)GPIO0_IR) & CONFIG_SYS_FPGA_INIT)
|
|
#define FPGA_INIT_STATE_V12 (in_be32((void*)GPIO0_IR) & CONFIG_SYS_FPGA_INIT_V12)
|
|
|
|
|
|
int board_revision(void)
|
|
{
|
|
unsigned long cntrl0Reg;
|
|
unsigned long value;
|
|
|
|
/*
|
|
* Get version of PCI405 board from GPIO's
|
|
*/
|
|
|
|
/*
|
|
* Setup GPIO pins (CS2/GPIO11 and CS3/GPIO12 as GPIO)
|
|
*/
|
|
cntrl0Reg = mfdcr(cntrl0);
|
|
mtdcr(cntrl0, cntrl0Reg | 0x03000000);
|
|
out_be32((void*)GPIO0_ODR, in_be32((void*)GPIO0_ODR) & ~0x00100200);
|
|
out_be32((void*)GPIO0_TCR, in_be32((void*)GPIO0_TCR) & ~0x00100200);
|
|
udelay(1000); /* wait some time before reading input */
|
|
value = in_be32((void*)GPIO0_IR) & 0x00100200; /* get config bits */
|
|
|
|
/*
|
|
* Restore GPIO settings
|
|
*/
|
|
mtdcr(cntrl0, cntrl0Reg);
|
|
|
|
switch (value) {
|
|
case 0x00100200:
|
|
/* CS2==1 && IRQ5==1 -> version 1.0 and 1.1 */
|
|
return 1;
|
|
case 0x00000200:
|
|
/* CS2==0 && IRQ5==1 -> version 1.2 */
|
|
return 2;
|
|
case 0x00000000:
|
|
/* CS2==0 && IRQ5==0 -> version 1.3 */
|
|
return 3;
|
|
#if 0 /* not yet manufactured ! */
|
|
case 0x00100000:
|
|
/* CS2==1 && IRQ5==0 -> version 1.4 */
|
|
return 4;
|
|
#endif
|
|
default:
|
|
/* should not be reached! */
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
|
|
unsigned long fpga_done_state(void)
|
|
{
|
|
if (gd->board_type < 2) {
|
|
return FPGA_DONE_STATE_V11;
|
|
} else {
|
|
return FPGA_DONE_STATE_V12;
|
|
}
|
|
}
|
|
|
|
|
|
unsigned long fpga_init_state(void)
|
|
{
|
|
if (gd->board_type < 2) {
|
|
return FPGA_INIT_STATE_V11;
|
|
} else {
|
|
return FPGA_INIT_STATE_V12;
|
|
}
|
|
}
|
|
|
|
|
|
int board_early_init_f (void)
|
|
{
|
|
unsigned long cntrl0Reg;
|
|
|
|
/*
|
|
* First pull fpga-prg pin low, to disable fpga logic (on version 1.2 board)
|
|
*/
|
|
out_be32((void*)GPIO0_ODR, 0x00000000); /* no open drain pins */
|
|
out_be32((void*)GPIO0_TCR, CONFIG_SYS_FPGA_PRG); /* setup for output */
|
|
out_be32((void*)GPIO0_OR, CONFIG_SYS_FPGA_PRG); /* set output pins to high */
|
|
out_be32((void*)GPIO0_OR, 0); /* pull prg low */
|
|
|
|
/*
|
|
* IRQ 0-15 405GP internally generated; active high; level sensitive
|
|
* IRQ 16 405GP internally generated; active low; level sensitive
|
|
* IRQ 17-24 RESERVED
|
|
* IRQ 25 (EXT IRQ 0) CAN0; active low; level sensitive
|
|
* IRQ 26 (EXT IRQ 1) CAN1; active low; level sensitive
|
|
* IRQ 27 (EXT IRQ 2) CAN2; active low; level sensitive
|
|
* IRQ 28 (EXT IRQ 3) CAN3; active low; level sensitive
|
|
* IRQ 29 (EXT IRQ 4) unused; active low; level sensitive
|
|
* IRQ 30 (EXT IRQ 5) FPGA Timestamp; active low; level sensitive
|
|
* IRQ 31 (EXT IRQ 6) PCI Reset; active low; level sensitive
|
|
*/
|
|
mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
|
|
mtdcr(uicer, 0x00000000); /* disable all ints */
|
|
mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/
|
|
mtdcr(uicpr, 0xFFFFFF80); /* set int polarities */
|
|
mtdcr(uictr, 0x10000000); /* set int trigger levels */
|
|
mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority*/
|
|
mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
|
|
|
|
/*
|
|
* Setup GPIO pins (IRQ4/GPIO21 as GPIO)
|
|
*/
|
|
cntrl0Reg = mfdcr(cntrl0);
|
|
mtdcr(cntrl0, cntrl0Reg | 0x00008000);
|
|
|
|
/*
|
|
* Setup GPIO pins (CS6+CS7 as GPIO)
|
|
*/
|
|
mtdcr(cntrl0, cntrl0Reg | 0x00300000);
|
|
|
|
/*
|
|
* EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 25 us
|
|
*/
|
|
mtebc (epcr, 0xa8400000); /* ebc always driven */
|
|
|
|
return 0;
|
|
}
|
|
|
|
int misc_init_r (void)
|
|
{
|
|
unsigned char *dst;
|
|
ulong len = sizeof(fpgadata);
|
|
int status;
|
|
int index;
|
|
int i;
|
|
unsigned int *ptr;
|
|
unsigned int *magic;
|
|
|
|
/*
|
|
* On PCI-405 the environment is saved in eeprom!
|
|
* FPGA can be gzip compressed (malloc) and booted this late.
|
|
*/
|
|
|
|
dst = malloc(CONFIG_SYS_FPGA_MAX_SIZE);
|
|
if (gunzip (dst, CONFIG_SYS_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
|
|
printf ("GUNZIP ERROR - must RESET board to recover\n");
|
|
do_reset (NULL, 0, 0, NULL);
|
|
}
|
|
|
|
status = fpga_boot(dst, len);
|
|
if (status != 0) {
|
|
printf("\nFPGA: Booting failed ");
|
|
switch (status) {
|
|
case ERROR_FPGA_PRG_INIT_LOW:
|
|
printf("(Timeout: INIT not low after asserting PROGRAM*)\n ");
|
|
break;
|
|
case ERROR_FPGA_PRG_INIT_HIGH:
|
|
printf("(Timeout: INIT not high after deasserting PROGRAM*)\n ");
|
|
break;
|
|
case ERROR_FPGA_PRG_DONE:
|
|
printf("(Timeout: DONE not high after programming FPGA)\n ");
|
|
break;
|
|
}
|
|
|
|
/* display infos on fpgaimage */
|
|
index = 15;
|
|
for (i=0; i<4; i++) {
|
|
len = dst[index];
|
|
printf("FPGA: %s\n", &(dst[index+1]));
|
|
index += len+3;
|
|
}
|
|
putc ('\n');
|
|
/* delayed reboot */
|
|
for (i=20; i>0; i--) {
|
|
printf("Rebooting in %2d seconds \r",i);
|
|
for (index=0;index<1000;index++)
|
|
udelay(1000);
|
|
}
|
|
putc ('\n');
|
|
do_reset(NULL, 0, 0, NULL);
|
|
}
|
|
|
|
puts("FPGA: ");
|
|
|
|
/* display infos on fpgaimage */
|
|
index = 15;
|
|
for (i=0; i<4; i++) {
|
|
len = dst[index];
|
|
printf("%s ", &(dst[index+1]));
|
|
index += len+3;
|
|
}
|
|
putc ('\n');
|
|
|
|
/*
|
|
* Reset FPGA via FPGA_DATA pin
|
|
*/
|
|
SET_FPGA(FPGA_PRG | FPGA_CLK);
|
|
udelay(1000); /* wait 1ms */
|
|
SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);
|
|
udelay(1000); /* wait 1ms */
|
|
|
|
/*
|
|
* Check if magic for pci reconfig is written
|
|
*/
|
|
magic = (unsigned int *)0x00000004;
|
|
if (*magic == PCI_RECONFIG_MAGIC) {
|
|
/*
|
|
* Rewrite pci config regs (only after soft-reset with magic set)
|
|
*/
|
|
ptr = (unsigned int *)PCI_REGS_ADDR;
|
|
if (crc32(0, (uchar *)PCI_REGS_ADDR+4, PCI_REGS_LEN-4) == *ptr) {
|
|
puts("Restoring PCI Configurations Regs!\n");
|
|
ptr = (unsigned int *)PCI_REGS_ADDR + 1;
|
|
for (i=0; i<0x40; i+=4) {
|
|
pci_write_config_dword(PCIDEVID_405GP, i, *ptr++);
|
|
}
|
|
}
|
|
mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
|
|
|
|
*magic = 0; /* clear pci reconfig magic again */
|
|
}
|
|
|
|
/*
|
|
* Decrease PLB latency timeout and reduce priority of the PCI bridge master
|
|
*/
|
|
#define PCI0_BRDGOPT1 0x4a
|
|
pci_write_config_word(PCIDEVID_405GP, PCI0_BRDGOPT1, 0x3f20);
|
|
|
|
#define plb0_acr 0x87
|
|
/*
|
|
* Enable fairness and high bus utilization
|
|
*/
|
|
mtdcr(plb0_acr, 0x98000000);
|
|
|
|
free(dst);
|
|
return (0);
|
|
}
|
|
|
|
|
|
/*
|
|
* Check Board Identity:
|
|
*/
|
|
int checkboard (void)
|
|
{
|
|
char str[64];
|
|
int i = getenv_r ("serial#", str, sizeof(str));
|
|
|
|
puts ("Board: ");
|
|
|
|
if (i == -1) {
|
|
puts ("### No HW ID - assuming PCI405");
|
|
} else {
|
|
puts (str);
|
|
}
|
|
|
|
gd->board_type = board_revision();
|
|
printf(" (Rev 1.%ld", gd->board_type);
|
|
|
|
if (gd->board_type >= 2) {
|
|
unsigned long cntrl0Reg;
|
|
unsigned long value;
|
|
|
|
/*
|
|
* Setup GPIO pins (Trace/GPIO1 to GPIO)
|
|
*/
|
|
cntrl0Reg = mfdcr(cntrl0);
|
|
mtdcr(cntrl0, cntrl0Reg & ~0x08000000);
|
|
out_be32((void*)GPIO0_ODR, in_be32((void*)GPIO0_ODR) & ~0x40000000);
|
|
out_be32((void*)GPIO0_TCR, in_be32((void*)GPIO0_TCR) & ~0x40000000);
|
|
udelay(1000); /* wait some time before reading input */
|
|
value = in_be32((void*)GPIO0_IR) & 0x40000000; /* get config bits */
|
|
if (value) {
|
|
puts(", 33 MHz PCI");
|
|
} else {
|
|
puts(", 66 MHz PCI");
|
|
}
|
|
}
|
|
|
|
puts(")\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
int wpeeprom(int wp)
|
|
{
|
|
int wp_state = wp;
|
|
volatile unsigned char *uart1_mcr = (volatile unsigned char *)0xef600404;
|
|
|
|
if (wp == 1) {
|
|
*uart1_mcr &= ~0x02;
|
|
} else if (wp == 0) {
|
|
*uart1_mcr |= 0x02;
|
|
} else {
|
|
if (*uart1_mcr & 0x02) {
|
|
wp_state = 0;
|
|
} else {
|
|
wp_state = 1;
|
|
}
|
|
}
|
|
return wp_state;
|
|
}
|
|
|
|
int do_wpeeprom(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
|
|
{
|
|
int wp = -1;
|
|
if (argc >= 2) {
|
|
if (argv[1][0] == '1') {
|
|
wp = 1;
|
|
} else if (argv[1][0] == '0') {
|
|
wp = 0;
|
|
}
|
|
}
|
|
|
|
wp = wpeeprom(wp);
|
|
printf("EEPROM write protection %s\n", wp ? "ENABLED" : "DISABLED");
|
|
return 0;
|
|
}
|
|
|
|
U_BOOT_CMD(
|
|
wpeeprom, 2, 1, do_wpeeprom,
|
|
"Check/Enable/Disable I2C EEPROM write protection",
|
|
"wpeeprom\n"
|
|
" - check I2C EEPROM write protection state\n"
|
|
"wpeeprom 1\n"
|
|
" - enable I2C EEPROM write protection\n"
|
|
"wpeeprom 0\n"
|
|
" - disable I2C EEPROM write protection\n"
|
|
);
|
|
|