upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/doc/README.mvblm7

2.6 KiB

Matrix Vision mvBlueLYNX-M7 (mvBL-M7)
-------------------------------------

1. Board Description

The mvBL-M7 is a 120x120mm single board computing platform
with strong focus on stereo image processing applications.

Power Supply is either VDC 12-48V or Pover over Ethernet (PoE)
on any port (requires add-on board).

2 System Components

2.1 CPU
Freescale MPC8343VRAGDB CPU running at 400MHz core and 266MHz csb.
512MByte DDR-II memory @ 133MHz.
8 MByte Nor Flash on local bus.
2 Vitesse VSC8601 RGMII ethernet Phys.
1 USB host controller over ULPI I/F.
2 serial ports. Console running on ttyS0 @ 115200 8N1.
1 SD-Card slot connected to SPI.
System configuration (HRCW) is taken from I2C EEPROM.

2.2 PCI
A miniPCI Type-III socket is present. PCI clock fixed at 66MHz.

2.3 FPGA
Altera Cyclone-II EP2C20/35 with PCI DMA engines.
Connects to dual Matrix Vision specific CCD/CMOS sensor interfaces.
Utilizes another 256MB DDR-II memory and 32-128MB Nand Flash.

2.3.1 I/O @ FPGA
2x8 Outputs : Infineon High-Side Switches to Main Supply.
2x8 Inputs : Programmable input threshold + trigger capabilities
2 dedicated flash interfaces for illuminator boards.
Cross trigger for chaining several boards.

2.4 I2C
Bus1:
MAX5381 DAC @ 0x60 for 1st digital input threshold.
LM75 @ 0x90 for temperature monitoring.
EEPROM @ 0xA0 for system setup (HRCW etc.) + vendor specifics.
1st image sensor interface (slave addresses depend on sensor)
Bus2:
MAX5381 DAC @ 0x60 for 2nd digital input threshold.
2nd image sensor interface (slave addresses depend on sensor)

3 Flash layout.

reset vector is 0xFFF00100, i.e. "HIGHBOOT".

FF800000 environment
FF802000 redundant environment
FF804000 u-boot script image
FF806000 redundant u-boot script image
FF808000 device tree blob
FF80A000 redundant device tree blob
FF80C000 tbd.
FF80E000 tbd.
FF810000 kernel
FFC00000 root FS
FFF00000 u-boot
FFF80000 FPGA raw bit file

mtd partitions are propagated to linux kernel via device tree blob.

4 Booting

On startup the bootscript @ FF804000 is executed. This script can be
exchanged easily. Default boot mode is "boot from flash", i.e. system
works stand-alone.

This behaviour depends on some environment variables :

"netboot" : yes ->try dhcp/bootp and boot from network.
A "dhcp_client_id" and "dhcp_vendor-class-identifier" can be used for
DHCP server configuration, e.g. to provide different images to
different devices.

During netboot the system tries to get 3 image files:
1. Kernel - name + data is given during BOOTP.
2. Initrd - name is stored in "initrd_name"
3. device tree blob - name is stored in "dtb_name"
Fallback files are the flash versions.