upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/include/net/pfe_eth/pfe_eth.h

103 lines
2.9 KiB

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright 2015-2016 Freescale Semiconductor, Inc.
* Copyright 2017 NXP
*/
#ifndef __PFE_ETH_H__
#define __PFE_ETH_H__
#include <linux/sizes.h>
#include <asm/io.h>
#include <miiphy.h>
#include <malloc.h>
#include "pfe_driver.h"
#define BMU2_DDR_BASEADDR 0
#define BMU2_BUF_COUNT (3 * SZ_1K)
#define BMU2_DDR_SIZE (DDR_BUF_SIZE * BMU2_BUF_COUNT)
#define HIF_RX_PKT_DDR_BASEADDR (BMU2_DDR_BASEADDR + BMU2_DDR_SIZE)
#define HIF_RX_PKT_DDR_SIZE (HIF_RX_DESC_NT * DDR_BUF_SIZE)
#define HIF_TX_PKT_DDR_BASEADDR (HIF_RX_PKT_DDR_BASEADDR + HIF_RX_PKT_DDR_SIZE)
#define HIF_TX_PKT_DDR_SIZE (HIF_TX_DESC_NT * DDR_BUF_SIZE)
#define HIF_DESC_BASEADDR (HIF_TX_PKT_DDR_BASEADDR + HIF_TX_PKT_DDR_SIZE)
#define HIF_RX_DESC_SIZE (16 * HIF_RX_DESC_NT)
#define HIF_TX_DESC_SIZE (16 * HIF_TX_DESC_NT)
#define UTIL_CODE_BASEADDR 0x780000
#define UTIL_CODE_SIZE (128 * SZ_1K)
#define UTIL_DDR_DATA_BASEADDR (UTIL_CODE_BASEADDR + UTIL_CODE_SIZE)
#define UTIL_DDR_DATA_SIZE (64 * SZ_1K)
#define CLASS_DDR_DATA_BASEADDR (UTIL_DDR_DATA_BASEADDR + UTIL_DDR_DATA_SIZE)
#define CLASS_DDR_DATA_SIZE (32 * SZ_1K)
#define TMU_DDR_DATA_BASEADDR (CLASS_DDR_DATA_BASEADDR + CLASS_DDR_DATA_SIZE)
#define TMU_DDR_DATA_SIZE (32 * SZ_1K)
#define TMU_LLM_BASEADDR (TMU_DDR_DATA_BASEADDR + TMU_DDR_DATA_SIZE)
#define TMU_LLM_QUEUE_LEN (16 * 256)
/* Must be power of two and at least 16 * 8 = 128 bytes */
#define TMU_LLM_SIZE (4 * 16 * TMU_LLM_QUEUE_LEN)
/* (4 TMU's x 16 queues x queue_len) */
#define ROUTE_TABLE_BASEADDR 0x800000
#define ROUTE_TABLE_HASH_BITS_MAX 15 /* 32K entries */
#define ROUTE_TABLE_HASH_BITS 8 /* 256 entries */
#define ROUTE_TABLE_SIZE (BIT(ROUTE_TABLE_HASH_BITS_MAX) \
* CLASS_ROUTE_SIZE)
#define PFE_TOTAL_DATA_SIZE (ROUTE_TABLE_BASEADDR + ROUTE_TABLE_SIZE)
#if PFE_TOTAL_DATA_SIZE > (12 * SZ_1M)
#error DDR mapping above 12MiB
#endif
/* LMEM Mapping */
#define BMU1_LMEM_BASEADDR 0
#define BMU1_BUF_COUNT 256
#define BMU1_LMEM_SIZE (LMEM_BUF_SIZE * BMU1_BUF_COUNT)
struct gemac_s {
void *gemac_base;
void *egpi_base;
/* GEMAC config */
int gemac_mode;
int gemac_speed;
int gemac_duplex;
int flags;
/* phy iface */
int phy_address;
int phy_mode;
struct mii_dev *bus;
};
struct pfe_mdio_info {
void *reg_base;
char *name;
};
struct pfe_eth_dev {
int gemac_port;
struct gemac_s *gem;
struct pfe_ddr_address pfe_addr;
struct udevice *dev;
#ifdef CONFIG_PHYLIB
struct phy_device *phydev;
#endif
};
int pfe_remove(struct pfe_ddr_address *pfe_addr);
struct mii_dev *pfe_mdio_init(struct pfe_mdio_info *mdio_info);
void pfe_set_mdio(int dev_id, struct mii_dev *bus);
void pfe_set_phy_address_mode(int dev_id, int phy_id, int phy_mode);
int gemac_initialize(bd_t *bis, int dev_id, char *devname);
int pfe_init(struct pfe_ddr_address *pfe_addr);
int pfe_eth_board_init(struct udevice *dev);
#endif /* __PFE_ETH_H__ */