upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
867 lines
28 KiB
867 lines
28 KiB
/**
|
|
* @file IxI2cDrv.h
|
|
*
|
|
* @brief Header file for the IXP400 I2C Driver (IxI2cDrv)
|
|
*
|
|
* @version $Revision: 0.1 $
|
|
*
|
|
* @par
|
|
* IXP400 SW Release version 2.0
|
|
*
|
|
* -- Copyright Notice --
|
|
*
|
|
* @par
|
|
* Copyright 2001-2005, Intel Corporation.
|
|
* All rights reserved.
|
|
*
|
|
* @par
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. Neither the name of the Intel Corporation nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* @par
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS''
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* @par
|
|
* -- End of Copyright Notice --
|
|
*/
|
|
|
|
/**
|
|
* @defgroup IxI2cDrv IXP400 I2C Driver(IxI2cDrv) API
|
|
*
|
|
* @brief IXP400 I2C Driver Public API
|
|
*
|
|
* @{
|
|
*/
|
|
#ifndef IXI2CDRV_H
|
|
#define IXI2CDRV_H
|
|
|
|
#ifdef __ixp46X
|
|
#include "IxOsal.h"
|
|
|
|
/*
|
|
* Section for #define
|
|
*/
|
|
|
|
/**
|
|
* @ingroup IxI2cDrv
|
|
* @brief The interval of micro/mili seconds the IXP will wait before it polls for
|
|
* status from the ixI2cIntrXferStatus; Every 20us is 1 byte @
|
|
* 400Kbps and 4 bytes @ 100Kbps. This is dependent on delay type selected
|
|
* through the API ixI2cDrvDelayTypeSelect.
|
|
*/
|
|
#define IX_I2C_US_POLL_FOR_XFER_STATUS 20
|
|
|
|
/**
|
|
* @ingroup IxI2cDrv
|
|
* @brief The number of tries that will be attempted to call a callback
|
|
* function if the callback does not or is unable to resolve the
|
|
* issue it is called to resolve
|
|
*/
|
|
#define IX_I2C_NUM_OF_TRIES_TO_CALL_CALLBACK_FUNC 10
|
|
|
|
|
|
/**
|
|
* @ingroup IxI2cDrv
|
|
* @brief Number of tries slave will poll the IDBR Rx full bit before it
|
|
* gives up
|
|
*/
|
|
#define IX_I2C_NUM_TO_POLL_IDBR_RX_FULL 0x100
|
|
|
|
/**
|
|
* @ingroup IxI2cDrv
|
|
* @brief Number of tries slave will poll the IDBR Tx empty bit before it
|
|
* gives up
|
|
*/
|
|
#define IX_I2C_NUM_TO_POLL_IDBR_TX_EMPTY 0x100
|
|
|
|
/*
|
|
* Section for enum
|
|
*/
|
|
|
|
/**
|
|
* @ingroup IxI2cDrv
|
|
*
|
|
* @enum IxI2cMasterStatus
|
|
*
|
|
* @brief The master status - transfer complete, bus error or arbitration loss
|
|
*/
|
|
typedef enum
|
|
{
|
|
IX_I2C_MASTER_XFER_COMPLETE = IX_SUCCESS,
|
|
IX_I2C_MASTER_XFER_BUS_ERROR,
|
|
IX_I2C_MASTER_XFER_ARB_LOSS
|
|
} IxI2cMasterStatus;
|
|
|
|
|
|
/**
|
|
* @ingroup IxI2cDrv
|
|
*
|
|
* @enum IX_I2C_STATUS
|
|
*
|
|
* @brief The status that can be returned in a I2C driver initialization
|
|
*/
|
|
typedef enum
|
|
{
|
|
IX_I2C_SUCCESS = IX_SUCCESS, /**< Success status */
|
|
IX_I2C_FAIL, /**< Fail status */
|
|
IX_I2C_NOT_SUPPORTED, /**< hardware does not have dedicated I2C hardware */
|
|
IX_I2C_NULL_POINTER, /**< parameter passed in is NULL */
|
|
IX_I2C_INVALID_SPEED_MODE_ENUM_VALUE, /**< speed mode selected is invalid */
|
|
IX_I2C_INVALID_FLOW_MODE_ENUM_VALUE, /**< flow mode selected is invalid */
|
|
IX_I2C_SLAVE_ADDR_CB_MISSING, /**< slave callback is NULL */
|
|
IX_I2C_GEN_CALL_CB_MISSING, /**< general callback is NULL */
|
|
IX_I2C_INVALID_SLAVE_ADDR, /**< invalid slave address specified */
|
|
IX_I2C_INT_BIND_FAIL, /**< interrupt bind fail */
|
|
IX_I2C_INT_UNBIND_FAIL, /**< interrupt unbind fail */
|
|
IX_I2C_NOT_INIT, /**< I2C is not initialized yet */
|
|
IX_I2C_MASTER_BUS_BUSY, /**< master detected a I2C bus busy */
|
|
IX_I2C_MASTER_ARB_LOSS, /**< master experienced arbitration loss */
|
|
IX_I2C_MASTER_XFER_ERROR, /**< master experienced a transfer error */
|
|
IX_I2C_MASTER_BUS_ERROR, /**< master detected a I2C bus error */
|
|
IX_I2C_MASTER_NO_BUFFER, /**< no buffer provided for master transfer */
|
|
IX_I2C_MASTER_INVALID_XFER_MODE, /**< xfer mode selected is invalid */
|
|
IX_I2C_SLAVE_ADDR_NOT_DETECTED, /**< polled slave addr not detected */
|
|
IX_I2C_GEN_CALL_ADDR_DETECTED, /**< polling detected general call */
|
|
IX_I2C_SLAVE_READ_DETECTED, /**< polling detected slave read request */
|
|
IX_I2C_SLAVE_WRITE_DETECTED, /**< polling detected slave write request */
|
|
IX_I2C_SLAVE_NO_BUFFER, /**< no buffer provided for slave transfers */
|
|
IX_I2C_DATA_SIZE_ZERO, /**< data size transfer is zero - invalid */
|
|
IX_I2C_SLAVE_WRITE_BUFFER_EMPTY, /**< slave buffer is used till empty */
|
|
IX_I2C_SLAVE_WRITE_ERROR, /**< slave write experienced an error */
|
|
IX_I2C_SLAVE_OR_GEN_READ_BUFFER_FULL, /**< slave buffer is filled up */
|
|
IX_I2C_SLAVE_OR_GEN_READ_ERROR /**< slave read experienced an error */
|
|
} IX_I2C_STATUS;
|
|
|
|
/**
|
|
* @ingroup IxI2cDrv
|
|
*
|
|
* @enum IxI2cSpeedMode
|
|
*
|
|
* @brief Type of speed modes supported by the I2C hardware.
|
|
*/
|
|
typedef enum
|
|
{
|
|
IX_I2C_NORMAL_MODE = 0x0,
|
|
IX_I2C_FAST_MODE
|
|
} IxI2cSpeedMode;
|
|
|
|
/**
|
|
* @ingroup IxI2cDrv
|
|
*
|
|
* @enum IxI2cXferMode
|
|
*
|
|
* @brief Used for indicating it is a repeated start or normal transfer
|
|
*/
|
|
typedef enum
|
|
{
|
|
IX_I2C_NORMAL = 0x0,
|
|
IX_I2C_REPEATED_START
|
|
} IxI2cXferMode;
|
|
|
|
/**
|
|
* @ingroup IxI2cDrv
|
|
*
|
|
* @enum IxI2cFlowMode
|
|
*
|
|
* @brief Used for indicating it is a poll or interrupt mode
|
|
*/
|
|
typedef enum
|
|
{
|
|
IX_I2C_POLL_MODE = 0x0,
|
|
IX_I2C_INTERRUPT_MODE
|
|
} IxI2cFlowMode;
|
|
|
|
/**
|
|
* @ingroup IxI2cDrv
|
|
*
|
|
* @enum IxI2cDelayMode
|
|
*
|
|
* @brief Used for selecting looping delay or OS scheduler delay
|
|
*/
|
|
typedef enum
|
|
{
|
|
IX_I2C_LOOP_DELAY = 1, /**< delay in microseconds */
|
|
IX_I2C_SCHED_DELAY /**< delay in miliseconds */
|
|
} IxI2cDelayMode;
|
|
|
|
/**
|
|
* @ingroup IxI2cDrv
|
|
*
|
|
* @brief The pointer to the function that will be called when the master
|
|
* has completed its receive. The parameter that is passed will
|
|
* provide the status of the read (success, arb loss, or bus
|
|
* error), the transfer mode (normal or repeated start, the
|
|
* buffer pointer and number of bytes transferred.
|
|
*/
|
|
typedef void (*IxI2cMasterReadCallbackP)(IxI2cMasterStatus, IxI2cXferMode, char*, UINT32);
|
|
|
|
/**
|
|
* @ingroup IxI2cDrv
|
|
*
|
|
* @brief The pointer to the function that will be called when the master
|
|
* has completed its transmit. The parameter that is passed will
|
|
* provide the status of the write (success, arb loss, or buss
|
|
* error), the transfer mode (normal or repeated start), the
|
|
* buffer pointer and number of bytes transferred.
|
|
*/
|
|
typedef void (*IxI2cMasterWriteCallbackP)(IxI2cMasterStatus, IxI2cXferMode, char*, UINT32);
|
|
|
|
/**
|
|
* @ingroup IxI2cDrv
|
|
*
|
|
* @brief The pointer to the function that will be called when a slave
|
|
* address detected in interrupt mode for a read. The parameters
|
|
* that is passed will provide the read status, buffer pointer,
|
|
* buffer size, and the bytes received. When a start of a read
|
|
* is initiated there will be no buffer allocated and this callback
|
|
* will be called to request for a buffer. While receiving, if the
|
|
* buffer gets filled, this callback will be called to request for
|
|
* a new buffer while sending the filled buffer's pointer and size,
|
|
* and data size received. When the receive is complete, this
|
|
* callback will be called to process the data and free the memory
|
|
* by passing the buffer's pointer and size, and data size received.
|
|
*/
|
|
typedef void (*IxI2cSlaveReadCallbackP)(IX_I2C_STATUS, char*, UINT32, UINT32);
|
|
|
|
/**
|
|
* @ingroup IxI2cDrv
|
|
*
|
|
* @brief The pointer to the function that will be called when a slave
|
|
* address detected in interrupt mode for a write. The parameters
|
|
* that is passed will provide the write status, buffer pointer,
|
|
* buffer size, and the bytes received. When a start of a write is
|
|
* initiated there will be no buffer allocated and this callback
|
|
* will be called to request for a buffer and to fill it with data.
|
|
* While transmitting, if the data in the buffer empties, this
|
|
* callback will be called to request for more data to be filled in
|
|
* the same or new buffer. When the transmit is complete, this
|
|
* callback will be called to free the memory or other actions to
|
|
* be taken.
|
|
*/
|
|
typedef void (*IxI2cSlaveWriteCallbackP)(IX_I2C_STATUS, char*, UINT32, UINT32);
|
|
|
|
/**
|
|
* @ingroup IxI2cDrv
|
|
*
|
|
* @brief The pointer to the function that will be called when a general
|
|
* call detected in interrupt mode for a read. The parameters that
|
|
* is passed will provide the read status, buffer pointer, buffer
|
|
* size, and the bytes received. When a start of a read is
|
|
* initiated there will be no buffer allocated and this callback
|
|
* will be called to request for a buffer. While receiving, if the
|
|
* buffer gets filled, this callback will be called to request for
|
|
* a new buffer while sending the filled buffer's pointer and size,
|
|
* and data size received. When the receive is complete, this
|
|
* callback will be called to process the data and free the memory
|
|
* by passing the buffer's pointer and size, and data size received.
|
|
*/
|
|
typedef void (*IxI2cGenCallCallbackP)(IX_I2C_STATUS, char*, UINT32, UINT32);
|
|
|
|
/*
|
|
* Section for struct
|
|
*/
|
|
|
|
/**
|
|
* @brief contains all the variables required to initialize the I2C unit
|
|
*
|
|
* Structure to be filled and used for calling initialization
|
|
*/
|
|
typedef struct
|
|
{
|
|
IxI2cSpeedMode I2cSpeedSelect; /**<Select either normal (100kbps)
|
|
or fast mode (400kbps)*/
|
|
IxI2cFlowMode I2cFlowSelect; /**<Select interrupt or poll mode*/
|
|
IxI2cMasterReadCallbackP MasterReadCBP;
|
|
/**<The master read callback pointer */
|
|
IxI2cMasterWriteCallbackP MasterWriteCBP;
|
|
/**<The master write callback pointer */
|
|
IxI2cSlaveReadCallbackP SlaveReadCBP;
|
|
/**<The slave read callback pointer */
|
|
IxI2cSlaveWriteCallbackP SlaveWriteCBP;
|
|
/**<The slave write callback pointer */
|
|
IxI2cGenCallCallbackP GenCallCBP;
|
|
/**<The general call callback pointer */
|
|
BOOL I2cGenCallResponseEnable; /**<Enable/disable the unit to
|
|
respond to generall calls.*/
|
|
BOOL I2cSlaveAddrResponseEnable;/**<Enable/disable the unit to
|
|
respond to the slave address set in
|
|
ISAR*/
|
|
BOOL SCLEnable; /**<Enable/disable the unit from
|
|
driving the SCL line during master
|
|
mode operation*/
|
|
UINT8 I2cHWAddr; /**<The address the unit will
|
|
response to as a slave device*/
|
|
} IxI2cInitVars;
|
|
|
|
/**
|
|
* @brief contains results of counters and their overflow
|
|
*
|
|
* Structure contains all values of counters and associated overflows.
|
|
*/
|
|
typedef struct
|
|
{
|
|
UINT32 ixI2cMasterXmitCounter; /**<Total bytes transmitted as
|
|
master.*/
|
|
UINT32 ixI2cMasterFailedXmitCounter; /**<Total bytes failed for
|
|
transmission as master.*/
|
|
UINT32 ixI2cMasterRcvCounter; /**<Total bytes received as
|
|
master.*/
|
|
UINT32 ixI2cMasterFailedRcvCounter; /**<Total bytes failed for
|
|
receival as master.*/
|
|
UINT32 ixI2cSlaveXmitCounter; /**<Total bytes transmitted as
|
|
slave.*/
|
|
UINT32 ixI2cSlaveFailedXmitCounter; /**<Total bytes failed for
|
|
transmission as slave.*/
|
|
UINT32 ixI2cSlaveRcvCounter; /**<Total bytes received as
|
|
slave.*/
|
|
UINT32 ixI2cSlaveFailedRcvCounter; /**<Total bytes failed for
|
|
receival as slave.*/
|
|
UINT32 ixI2cGenAddrCallSucceedCounter; /**<Total bytes successfully
|
|
transmitted for general address.*/
|
|
UINT32 ixI2cGenAddrCallFailedCounter; /**<Total bytes failed transmission
|
|
for general address.*/
|
|
UINT32 ixI2cArbLossCounter; /**<Total instances of arbitration
|
|
loss has occured.*/
|
|
} IxI2cStatsCounters;
|
|
|
|
|
|
/*
|
|
* Section for prototypes interface functions
|
|
*/
|
|
|
|
/**
|
|
* @ingroup IxI2cDrv
|
|
*
|
|
* @fn ixI2cDrvInit(
|
|
IxI2cInitVars *InitVarsSelected)
|
|
*
|
|
* @brief Initializes the I2C Driver.
|
|
*
|
|
* @param "IxI2cInitVars [in] *InitVarsSelected" - struct containing required
|
|
* variables for initialization
|
|
*
|
|
* Global Data :
|
|
* - None.
|
|
*
|
|
* This API will check if the hardware supports this I2C driver and the validity
|
|
* of the parameters passed in. It will continue to process the parameters
|
|
* passed in by setting the speed of the I2C unit (100kbps or 400kbps), setting
|
|
* the flow to either interrupt or poll mode, setting the address of the I2C unit,
|
|
* enabling/disabling the respond to General Calls, enabling/disabling the respond
|
|
* to Slave Address and SCL line driving. If it is interrupt mode, then it will
|
|
* register the callback routines for master, slavetransfer and general call receive.
|
|
*
|
|
* @return
|
|
* - IX_I2C_SUCCESS - Successfully initialize and enable the I2C
|
|
* hardware.
|
|
* - IX_I2C_NOT_SUPPORTED - The hardware does not support or have a
|
|
* dedicated I2C unit to support this driver
|
|
* - IX_I2C_NULL_POINTER - The parameter passed in is a NULL pointed
|
|
* - IX_I2C_INVALID_SPEED_MODE_ENUM_VALUE - The speed mode selected in the
|
|
* InitVarsSelected is invalid
|
|
* - IX_I2C_INVALID_FLOW_MODE_ENUM_VALUE - The flow mode selected in the
|
|
* InitVarsSelected is invalid
|
|
* - IX_I2C_INVALID_SLAVE_ADDR - The address 0x0 is reserved for
|
|
* general call.
|
|
* - IX_I2C_SLAVE_ADDR_CB_MISSING - interrupt mode is selected but
|
|
* slave address callback pointer is NULL
|
|
* - IX_I2C_GEN_CALL_CB_MISSING - interrupt mode is selected but
|
|
* general call callback pointer is NULL
|
|
* - IX_I2C_INT_BIND_FAIL - The ISR for the I2C failed to bind
|
|
* - IX_I2C_INT_UNBIND_FAIL - The ISR for the I2C failed to unbind
|
|
*
|
|
* @li Reentrant : yes
|
|
* @li ISR Callable : yes
|
|
*
|
|
*/
|
|
PUBLIC IX_I2C_STATUS
|
|
ixI2cDrvInit(IxI2cInitVars *InitVarsSelected);
|
|
|
|
/**
|
|
* @ingroup IxI2cDrv
|
|
*
|
|
* @fn ixI2cDrvUninit(
|
|
void)
|
|
*
|
|
* @brief Disables the I2C hardware
|
|
*
|
|
* @param - None
|
|
*
|
|
* Global Data :
|
|
* - None.
|
|
*
|
|
* This API will disable the I2C hardware, unbind interrupt, and unmap memory.
|
|
*
|
|
* @return
|
|
* - IX_I2C_SUCCESS - successfully un-initialized I2C
|
|
* - IX_I2C_INT_UNBIND_FAIL - failed to unbind the I2C interrupt
|
|
* - IX_I2C_NOT_INIT - I2C not init yet.
|
|
*
|
|
* @li Reentrant : yes
|
|
* @li ISR Callable : yes
|
|
*
|
|
*/
|
|
PUBLIC IX_I2C_STATUS
|
|
ixI2cDrvUninit(void);
|
|
|
|
/**
|
|
* @ingroup IxI2cDrv
|
|
*
|
|
* @fn ixI2cDrvSlaveAddrSet(
|
|
UINT8 SlaveAddrSet)
|
|
*
|
|
* @brief Sets the I2C Slave Address
|
|
*
|
|
* @param "UINT8 [in] SlaveAddrSet" - Slave Address to be inserted into ISAR
|
|
*
|
|
* Global Data :
|
|
* - None.
|
|
*
|
|
* This API will insert the SlaveAddrSet into the ISAR.
|
|
*
|
|
* @return
|
|
* - IX_I2C_SUCCESS - successfuly set the slave addr
|
|
* - IX_I2C_INVALID_SLAVE_ADDR - invalid slave address (zero) specified
|
|
* - IX_I2C_NOT_INIT - I2C not init yet.
|
|
*
|
|
* @li Reentrant : yes
|
|
* @li ISR Callable : yes
|
|
*
|
|
*/
|
|
PUBLIC IX_I2C_STATUS
|
|
ixI2cDrvSlaveAddrSet(UINT8 SlaveAddrSet);
|
|
|
|
/**
|
|
* @ingroup IxI2cDrv
|
|
*
|
|
* @fn ixI2cDrvBusScan(
|
|
void)
|
|
*
|
|
* @brief scans the I2C bus for slave devices
|
|
*
|
|
* @param - None
|
|
*
|
|
* Global Data :
|
|
* - None.
|
|
*
|
|
* This API will prompt all slave addresses for a reply except its own
|
|
*
|
|
* @return
|
|
* - IX_I2C_SUCCESS - found at least one slave device
|
|
* - IX_I2C_FAIL - Fail to find even one slave device
|
|
* - IX_I2C_BUS_BUSY - The I2C bus is busy (held by another I2C master)
|
|
* - IX_I2C_ARB_LOSS - The I2C bus was loss to another I2C master
|
|
* - IX_I2C_NOT_INIT - I2C not init yet.
|
|
*
|
|
* @li Reentrant : yes
|
|
* @li ISR Callable : yes
|
|
*
|
|
*/
|
|
PUBLIC IX_I2C_STATUS
|
|
ixI2cDrvBusScan(void);
|
|
|
|
/**
|
|
* @ingroup IxI2cDrv
|
|
*
|
|
* @fn ixI2cDrvWriteTransfer(
|
|
UINT8 SlaveAddr,
|
|
char *bufP,
|
|
UINT32 dataSize,
|
|
IxI2cXferMode XferModeSelect)
|
|
*
|
|
* @param "UINT8 [in] SlaveAddr" - The slave address to request data from.
|
|
* @param "char [in] *bufP" - The pointer to the data to be transmitted.
|
|
* @param "UINT32 [in] dataSize" - The number of bytes requested.
|
|
* @param "IxI2cXferMode [in] XferModeSelect" - the transfer mode selected,
|
|
* either repeated start (ends w/o stop) or normal (start and stop)
|
|
*
|
|
* Global Data :
|
|
* - None.
|
|
*
|
|
* This API will try to obtain master control of the I2C bus and transmit the
|
|
* number of bytes, specified by dataSize, to the user specified slave
|
|
* address from the buffer pointer. It will use either interrupt or poll mode
|
|
* depending on the method selected.
|
|
*
|
|
* If in interrupt mode and IxI2cMasterWriteCallbackP is not NULL, the driver
|
|
* will initiate the transfer and return immediately. The function pointed to
|
|
* by IxI2cMasterWriteCallbackP will be called in the interrupt service
|
|
* handlers when the operation is complete.
|
|
*
|
|
* If in interrupt mode and IxI2cMasterWriteCallbackP is NULL, then the driver
|
|
* will wait for the operation to complete, and then return.
|
|
*
|
|
* And if the repeated start transfer mode is selected, then it will not send a
|
|
* stop signal at the end of all the transfers.
|
|
* *NOTE*: If repeated start transfer mode is selected, it has to end with a
|
|
* normal mode transfer mode else the bus will continue to be held
|
|
* by the IXP.
|
|
*
|
|
* @return
|
|
* - IX_I2C_SUCCESS - Successfuuly wrote data to slave.
|
|
* - IX_I2C_MASTER_BUS_BUSY - The I2C bus is busy (held by another I2C master)
|
|
* - IX_I2C_MASTER_ARB_LOSS - The I2C bus was loss to another I2C master
|
|
* - IX_I2C_MASTER_XFER_ERROR - There was a transfer error
|
|
* - IX_I2C_MASTER_BUS_ERROR - There was a bus error during transfer
|
|
* - IX_I2C_MASTER_NO_BUFFER - buffer pointer is NULL
|
|
* - IX_I2C_MASTER_INVALID_XFER_MODE - Xfer mode selected is invalid
|
|
* - IX_I2C_DATA_SIZE_ZERO - dataSize passed in is zero, which is invalid
|
|
* - IX_I2C_NOT_INIT - I2C not init yet.
|
|
*
|
|
* @li Reentrant : no
|
|
* @li ISR Callable : no
|
|
*
|
|
*/
|
|
PUBLIC IX_I2C_STATUS
|
|
ixI2cDrvWriteTransfer(
|
|
UINT8 SlaveAddr,
|
|
char *bufP,
|
|
UINT32 dataSize,
|
|
IxI2cXferMode XferModeSelect);
|
|
|
|
/**
|
|
* @ingroup IxI2cDrv
|
|
*
|
|
* @fn ixI2cDrvReadTransfer(
|
|
UINT8 SlaveAddr,
|
|
char *bufP,
|
|
UINT32 dataSize,
|
|
IxI2cXferMode XferModeSelect)
|
|
*
|
|
* @brief Initiates a transfer to receive bytes of data from a slave
|
|
* device through the I2C bus.
|
|
*
|
|
* @param "UINT8 [in] SlaveAddr" - The slave address to request data from.
|
|
* @param "char [out] *bufP" - The pointer to the buffer to store the
|
|
* requested data.
|
|
* @param "UINT32 [in] dataSize" - The number of bytes requested.
|
|
* @param "IxI2cXferMode [in] XferModeSelect" - the transfer mode selected,
|
|
* either repeated start (ends w/o stop) or normal (start and stop)
|
|
*
|
|
* Global Data :
|
|
* - None.
|
|
*
|
|
* This API will try to obtain master control of the I2C bus and receive the
|
|
* number of bytes, specified by dataSize, from the user specified address
|
|
* into the receive buffer. It will use either interrupt or poll mode depending
|
|
* on the mode selected.
|
|
*
|
|
* If in interrupt mode and IxI2cMasterReadCallbackP is not NULL, the driver
|
|
* will initiate the transfer and return immediately. The function pointed to
|
|
* by IxI2cMasterReadCallbackP will be called in the interrupt service
|
|
* handlers when the operation is complete.
|
|
*
|
|
* If in interrupt mode and IxI2cMasterReadCallbackP is NULL, then the driver will
|
|
* wait for the operation to complete, and then return.
|
|
*
|
|
* And if the repeated start transfer mode is selected, then it will not send a
|
|
* stop signal at the end of all the transfers.
|
|
* *NOTE*: If repeated start transfer mode is selected, it has to end with a
|
|
* normal mode transfer mode else the bus will continue to be held
|
|
* by the IXP.
|
|
*
|
|
* @return
|
|
* - IX_I2C_SUCCESS - Successfuuly read slave data
|
|
* - IX_I2C_MASTER_BUS_BUSY - The I2C bus is busy (held by another I2C master)
|
|
* - IX_I2C_MASTER_ARB_LOSS - The I2C bus was loss to another I2C master
|
|
* - IX_I2C_MASTER_XFER_ERROR - There was a bus error during transfer
|
|
* - IX_I2C_MASTER_BUS_ERROR - There was a bus error during transfer
|
|
* - IX_I2C_MASTER_NO_BUFFER - buffer pointer is NULL
|
|
* - IX_I2C_MASTER_INVALID_XFER_MODE - Xfer mode selected is invalid
|
|
* - IX_I2C_INVALID_SLAVE_ADDR - invalid slave address (zero) specified
|
|
* - IX_I2C_DATA_SIZE_ZERO - dataSize passed in is zero, which is invalid
|
|
* - IX_I2C_NOT_INIT - I2C not init yet.
|
|
*
|
|
* @li Reentrant : no
|
|
* @li ISR Callable : no
|
|
*
|
|
*/
|
|
PUBLIC IX_I2C_STATUS
|
|
ixI2cDrvReadTransfer(
|
|
UINT8 SlaveAddr,
|
|
char *bufP,
|
|
UINT32 dataSize,
|
|
IxI2cXferMode XferModeSelect);
|
|
|
|
/**
|
|
* @ingroup IxI2cDrv
|
|
*
|
|
* @fn ixI2cDrvSlaveAddrAndGenCallDetectedCheck(
|
|
void)
|
|
*
|
|
* @brief Checks the I2C Status Register to determine if a slave address is
|
|
* detected
|
|
*
|
|
* @param - None
|
|
*
|
|
* Global Data :
|
|
* - None.
|
|
*
|
|
* This API is used in polled mode to determine if the I2C unit is requested
|
|
* for a slave or general call transfer. If it is requested for a slave
|
|
* transfer then it will determine if it is a general call (read only), read,
|
|
* or write transfer requested.
|
|
*
|
|
* @return
|
|
* - IX_I2C_SLAVE_ADDR_NOT_DETECTED - The I2C unit is not requested for slave
|
|
* transfer
|
|
* - IX_I2C_GEN_CALL_ADDR_DETECTED - The I2C unit is not requested for slave
|
|
* transfer but for general call
|
|
* - IX_I2C_SLAVE_READ_DETECTED - The I2C unit is requested for a read
|
|
* - IX_I2C_SLAVE_WRITE_DETECTED - The I2C unit is requested for a write
|
|
* - IX_I2C_NOT_INIT - I2C not init yet.
|
|
*
|
|
* @li Reentrant : no
|
|
* @li ISR Callable : no
|
|
*
|
|
*/
|
|
PUBLIC IX_I2C_STATUS
|
|
ixI2cDrvSlaveAddrAndGenCallDetectedCheck(void);
|
|
|
|
/**
|
|
* @ingroup IxI2cDrv
|
|
*
|
|
* @fn ixI2cDrvSlaveOrGenDataReceive(
|
|
char *bufP,
|
|
UINT32 bufSize,
|
|
UINT32 *dataSizeRcvd)
|
|
*
|
|
* @brief Performs the slave receive or general call receive data transfer
|
|
*
|
|
* @param "char [in] *bufP" - the pointer to the buffer to store data
|
|
* "UINT32 [in] bufSize" - the buffer size allocated
|
|
* "UINT32 [in] *dataSizeRcvd" - the length of data received in bytes
|
|
*
|
|
* Global Data :
|
|
* - None.
|
|
*
|
|
* This API is only used in polled mode to perform the slave read or general call
|
|
* receive data. It will continuously store the data received into bufP until
|
|
* complete or until bufP is full in which it will return
|
|
* IX_I2C_SLAVE_OR_GEN_READ_BUFFER_FULL. If in interrupt mode, the callback will be
|
|
* used.
|
|
*
|
|
* @return
|
|
* - IX_I2C_SUCCESS - The I2C driver transferred the data successfully.
|
|
* - IX_I2C_SLAVE_OR_GEN_READ_BUFFER_FULL - The I2C driver has ran out of
|
|
* space to store the received data.
|
|
* - IX_I2C_SLAVE_OR_GEN_READ_ERROR - The I2C driver didn't manage to
|
|
* detect the IDBR Rx Full bit
|
|
* - IX_I2C_DATA_SIZE_ZERO - bufSize passed in is zero, which is invalid
|
|
* - IX_I2C_SLAVE_NO_BUFFER - buffer pointer is NULL
|
|
* - IX_I2C_NULL_POINTER - dataSizeRcvd is NULL
|
|
* - IX_I2C_NOT_INIT - I2C not init yet.
|
|
*
|
|
* @li Reentrant : no
|
|
* @li ISR Callable : no
|
|
*
|
|
*/
|
|
PUBLIC IX_I2C_STATUS
|
|
ixI2cDrvSlaveOrGenDataReceive(
|
|
char *bufP,
|
|
UINT32 bufSize,
|
|
UINT32 *dataSizeRcvd);
|
|
|
|
/**
|
|
* @ingroup IxI2cDrv
|
|
*
|
|
* @fn ixI2cDrvSlaveDataTransmit(
|
|
char *bufP,
|
|
UINT32 dataSize,
|
|
UINT32 *dataSizeXmtd)
|
|
*
|
|
* @brief Performs the slave write data transfer
|
|
*
|
|
* @param "char [in] *bufP" - the pointer to the buffer for data to be
|
|
* transmitted
|
|
* "UINT32 [in] bufSize" - the buffer size allocated
|
|
* "UINT32 [in] *dataSizeRcvd" - the length of data trasnmitted in
|
|
* bytes
|
|
*
|
|
* Global Data :
|
|
* - None.
|
|
*
|
|
* This API is only used in polled mode to perform the slave transmit data. It
|
|
* will continuously transmit the data from bufP until complete or until bufP
|
|
* is empty in which it will return IX_I2C_SLAVE_WRITE_BUFFER_EMPTY. If in
|
|
* interrupt mode, the callback will be used.
|
|
*
|
|
* @return
|
|
* - IX_I2C_SUCCESS - The I2C driver transferred the data successfully.
|
|
* - IX_I2C_SLAVE_WRITE_BUFFER_EMPTY - The I2C driver needs more data to
|
|
* transmit.
|
|
* - IX_I2C_SLAVE_WRITE_ERROR -The I2C driver didn't manage to detect the
|
|
* IDBR Tx empty bit or the slave stop bit.
|
|
* - IX_I2C_DATA_SIZE_ZERO - dataSize passed in is zero, which is invalid
|
|
* - IX_I2C_SLAVE_NO_BUFFER - buffer pointer is NULL
|
|
* - IX_I2C_NULL_POINTER - dataSizeXmtd is NULL
|
|
* - IX_I2C_NOT_INIT - I2C not init yet.
|
|
*
|
|
* @li Reentrant : no
|
|
* @li ISR Callable : no
|
|
*
|
|
*/
|
|
PUBLIC IX_I2C_STATUS
|
|
ixI2cDrvSlaveDataTransmit(
|
|
char *bufP,
|
|
UINT32 dataSize,
|
|
UINT32 *dataSizeXmtd);
|
|
|
|
/**
|
|
* @ingroup IxI2cDrv
|
|
*
|
|
* @fn ixI2cDrvSlaveOrGenCallBufReplenish(
|
|
char *bufP,
|
|
UINT32 bufSize)
|
|
*
|
|
* @brief Replenishes the buffer which stores buffer info for both slave and
|
|
* general call
|
|
*
|
|
* @param "char [in] *bufP" - pointer to the buffer allocated
|
|
* "UINT32 [in] bufSize" - size of the buffer
|
|
*
|
|
* Global Data :
|
|
* - None.
|
|
*
|
|
* This API is only used in interrupt mode for replenishing the same buffer
|
|
* that is used by both slave and generall call by updating the buffer info
|
|
* with new info and clearing previous offsets set by previous transfers.
|
|
*
|
|
* @return
|
|
* - None
|
|
*
|
|
* @li Reentrant : no
|
|
* @li ISR Callable : no
|
|
*
|
|
*/
|
|
PUBLIC void
|
|
ixI2cDrvSlaveOrGenCallBufReplenish(
|
|
char *bufP,
|
|
UINT32 bufSize);
|
|
|
|
/**
|
|
* @ingroup IxI2cDrv
|
|
*
|
|
* @fn ixI2cDrvStatsGet(IxI2cStatsCounters *I2cStats)
|
|
*
|
|
* @brief Returns the I2C Statistics through the pointer passed in
|
|
*
|
|
* @param - "IxI2cStatsCounters [out] *I2cStats" - I2C statistics counter will
|
|
* be read and written to the location pointed by this pointer.
|
|
*
|
|
* Global Data :
|
|
* - None.
|
|
*
|
|
* This API will return the statistics counters of the I2C driver.
|
|
*
|
|
* @return
|
|
* - IX_I2C_NULL_POINTER - pointer passed in is NULL
|
|
* - IX_I2C_SUCCESS - successfully obtained I2C statistics
|
|
*
|
|
* @li Reentrant : yes
|
|
* @li ISR Callable : no
|
|
*
|
|
*/
|
|
PUBLIC IX_I2C_STATUS
|
|
ixI2cDrvStatsGet(IxI2cStatsCounters *I2cStats);
|
|
|
|
/**
|
|
* @ingroup IxI2cDrv
|
|
*
|
|
* @fn ixI2cDrvStatsReset(void)
|
|
*
|
|
* @brief Reset I2C statistics counters.
|
|
*
|
|
* @param - None
|
|
*
|
|
* Global Data :
|
|
* - None.
|
|
*
|
|
* This API will reset the statistics counters of the I2C driver.
|
|
*
|
|
* @return
|
|
* - None
|
|
*
|
|
* @li Reentrant : yes
|
|
* @li ISR Callable : no
|
|
*
|
|
*/
|
|
PUBLIC void
|
|
ixI2cDrvStatsReset(void);
|
|
|
|
/**
|
|
* @ingroup IxI2cDrv
|
|
*
|
|
* @fn ixI2cDrvShow(void)
|
|
*
|
|
* @brief Displays the I2C status register and the statistics counter.
|
|
*
|
|
* @param - None
|
|
*
|
|
* Global Data :
|
|
* - None.
|
|
*
|
|
* This API will display the I2C Status register and is useful if any error
|
|
* occurs. It displays the detection of bus error, slave address, general call,
|
|
* address, IDBR receive full, IDBR transmit empty, arbitration loss, slave
|
|
* STOP signal, I2C bus busy, unit busy, ack/nack, and read/write mode. It will
|
|
* also call the ixI2cDrvGetStats and then display the statistics counter.
|
|
*
|
|
* @return
|
|
* - IX_I2C_SUCCESS - successfully displayed statistics and status register
|
|
* - IX_I2C_NOT_INIT - I2C not init yet.
|
|
*
|
|
* @li Reentrant : yes
|
|
* @li ISR Callable : no
|
|
*
|
|
*/
|
|
PUBLIC IX_I2C_STATUS
|
|
ixI2cDrvShow(void);
|
|
|
|
/**
|
|
* @ingroup IxI2cDrv
|
|
*
|
|
* @fn ixI2cDrvDelayTypeSelect (IxI2cDelayMode delayMechanismSelect)
|
|
*
|
|
* @brief Sets the delay type of either looping delay or OS scheduler delay
|
|
* according to the argument provided.
|
|
*
|
|
* @param - "IxI2cDelayMode [in] delayTypeSelect" - the I2C delay type selected
|
|
*
|
|
* Global Data :
|
|
* - None.
|
|
*
|
|
* This API will set the delay type used by the I2C Driver to either looping
|
|
* delay or OS scheduler delay.
|
|
*
|
|
* @return
|
|
* - None
|
|
*
|
|
* @li Reentrant : yes
|
|
* @li ISR Callable : no
|
|
*
|
|
*/
|
|
PUBLIC void
|
|
ixI2cDrvDelayTypeSelect (IxI2cDelayMode delayTypeSelect);
|
|
|
|
#endif /* __ixp46X */
|
|
#endif /* IXI2CDRV_H */
|
|
|