arm64: mvebu: Add basic support for the Marvell Armada 7K/8K SoC
Compared to the Armada 3700, the Armada 7K and 8K are much more on the
high-end side: they use a dual Cortex-A72 or a quad Cortex-A72, as
opposed to the Cortex-A53 for the Armada 3700.
The Armada 7K and 8K also use a fairly unique architecture, internally
they are composed of several components:
- One AP (Application Processor), which contains the processor itself
and a few core hardware blocks. The AP used in the Armada 7K and 8K
is called AP806, and is available in two configurations:
dual Cortex-A72 and quad Cortex-A72.
- One or two CP (Communication Processor), which contain most of the I/O
interfaces (SATA, PCIe, Ethernet, etc.). The 7K family chips have one
CP, while the 8K family chips integrate two CPs, providing two times
the number of I/O interfaces available in the CP.
The CP used in the 7K and 8K is called CP110.
All in all, this gives the following combinations:
- Armada 7020, which is a dual Cortex-A72 with one CP
- Armada 7040, which is a quad Cortex-A72 with one CP
- Armada 8020, which is a dual Cortex-A72 with two CPs
- Armada 8040, which is a quad Cortex-A72 with two CPs
This patch adds basic support for this ARMv8 based SoC into U-Boot.
Future patches will integrate other device drivers and board support,
starting with the Marvell DB-88F7040 development board.
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Nadav Haklai <nadavh@marvell.com>
Cc: Neta Zur Hershkovits <neta@marvell.com>
Cc: Kostya Porotchkin <kostap@marvell.com>
Cc: Omri Itach <omrii@marvell.com>
Cc: Igal Liberman <igall@marvell.com>
Cc: Haim Boot <hayim@marvell.com>
Cc: Hanna Hawa <hannah@marvell.com>
9 years ago
|
|
|
/*
|
|
|
|
* Copyright (C) 2016 Stefan Roese <sr@denx.de>
|
|
|
|
*
|
|
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <common.h>
|
|
|
|
#include <dm.h>
|
|
|
|
#include <fdtdec.h>
|
|
|
|
#include <libfdt.h>
|
|
|
|
#include <asm/io.h>
|
|
|
|
#include <asm/system.h>
|
|
|
|
#include <asm/arch/cpu.h>
|
|
|
|
#include <asm/arch/soc.h>
|
|
|
|
#include <asm/armv8/mmu.h>
|
|
|
|
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
|
|
|
|
/* Armada 7k/8k */
|
|
|
|
#define MVEBU_RFU_BASE (MVEBU_REGISTER(0x6f0000))
|
|
|
|
#define RFU_GLOBAL_SW_RST (MVEBU_RFU_BASE + 0x84)
|
|
|
|
#define RFU_SW_RESET_OFFSET 0
|
|
|
|
|
|
|
|
static struct mm_region mvebu_mem_map[] = {
|
|
|
|
{
|
|
|
|
/* RAM */
|
|
|
|
.phys = 0x0UL,
|
|
|
|
.virt = 0x0UL,
|
|
|
|
.size = 0x80000000UL,
|
|
|
|
.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
|
|
|
|
PTE_BLOCK_INNER_SHARE
|
|
|
|
},
|
|
|
|
{
|
|
|
|
/* SRAM, MMIO regions - AP806 region */
|
|
|
|
.phys = 0xf0000000UL,
|
|
|
|
.virt = 0xf0000000UL,
|
|
|
|
.size = 0x01000000UL, /* 16MiB internal registers */
|
|
|
|
.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
|
|
|
|
PTE_BLOCK_NON_SHARE
|
|
|
|
},
|
|
|
|
{
|
|
|
|
/* SRAM, MMIO regions - CP110 master region */
|
arm64: mvebu: Add basic support for the Marvell Armada 7K/8K SoC
Compared to the Armada 3700, the Armada 7K and 8K are much more on the
high-end side: they use a dual Cortex-A72 or a quad Cortex-A72, as
opposed to the Cortex-A53 for the Armada 3700.
The Armada 7K and 8K also use a fairly unique architecture, internally
they are composed of several components:
- One AP (Application Processor), which contains the processor itself
and a few core hardware blocks. The AP used in the Armada 7K and 8K
is called AP806, and is available in two configurations:
dual Cortex-A72 and quad Cortex-A72.
- One or two CP (Communication Processor), which contain most of the I/O
interfaces (SATA, PCIe, Ethernet, etc.). The 7K family chips have one
CP, while the 8K family chips integrate two CPs, providing two times
the number of I/O interfaces available in the CP.
The CP used in the 7K and 8K is called CP110.
All in all, this gives the following combinations:
- Armada 7020, which is a dual Cortex-A72 with one CP
- Armada 7040, which is a quad Cortex-A72 with one CP
- Armada 8020, which is a dual Cortex-A72 with two CPs
- Armada 8040, which is a quad Cortex-A72 with two CPs
This patch adds basic support for this ARMv8 based SoC into U-Boot.
Future patches will integrate other device drivers and board support,
starting with the Marvell DB-88F7040 development board.
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Nadav Haklai <nadavh@marvell.com>
Cc: Neta Zur Hershkovits <neta@marvell.com>
Cc: Kostya Porotchkin <kostap@marvell.com>
Cc: Omri Itach <omrii@marvell.com>
Cc: Igal Liberman <igall@marvell.com>
Cc: Haim Boot <hayim@marvell.com>
Cc: Hanna Hawa <hannah@marvell.com>
9 years ago
|
|
|
.phys = 0xf2000000UL,
|
|
|
|
.virt = 0xf2000000UL,
|
|
|
|
.size = 0x02000000UL, /* 32MiB internal registers */
|
|
|
|
.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
|
|
|
|
PTE_BLOCK_NON_SHARE
|
|
|
|
},
|
|
|
|
{
|
|
|
|
/* SRAM, MMIO regions - CP110 slave region */
|
|
|
|
.phys = 0xf4000000UL,
|
|
|
|
.virt = 0xf4000000UL,
|
|
|
|
.size = 0x02000000UL, /* 32MiB internal registers */
|
|
|
|
.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
|
|
|
|
PTE_BLOCK_NON_SHARE
|
|
|
|
},
|
|
|
|
{
|
|
|
|
/* PCI regions */
|
|
|
|
.phys = 0xf8000000UL,
|
|
|
|
.virt = 0xf8000000UL,
|
|
|
|
.size = 0x08000000UL, /* 128MiB PCI space (master & slave) */
|
|
|
|
.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
|
|
|
|
PTE_BLOCK_NON_SHARE
|
|
|
|
},
|
|
|
|
{
|
arm64: mvebu: Add basic support for the Marvell Armada 7K/8K SoC
Compared to the Armada 3700, the Armada 7K and 8K are much more on the
high-end side: they use a dual Cortex-A72 or a quad Cortex-A72, as
opposed to the Cortex-A53 for the Armada 3700.
The Armada 7K and 8K also use a fairly unique architecture, internally
they are composed of several components:
- One AP (Application Processor), which contains the processor itself
and a few core hardware blocks. The AP used in the Armada 7K and 8K
is called AP806, and is available in two configurations:
dual Cortex-A72 and quad Cortex-A72.
- One or two CP (Communication Processor), which contain most of the I/O
interfaces (SATA, PCIe, Ethernet, etc.). The 7K family chips have one
CP, while the 8K family chips integrate two CPs, providing two times
the number of I/O interfaces available in the CP.
The CP used in the 7K and 8K is called CP110.
All in all, this gives the following combinations:
- Armada 7020, which is a dual Cortex-A72 with one CP
- Armada 7040, which is a quad Cortex-A72 with one CP
- Armada 8020, which is a dual Cortex-A72 with two CPs
- Armada 8040, which is a quad Cortex-A72 with two CPs
This patch adds basic support for this ARMv8 based SoC into U-Boot.
Future patches will integrate other device drivers and board support,
starting with the Marvell DB-88F7040 development board.
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Nadav Haklai <nadavh@marvell.com>
Cc: Neta Zur Hershkovits <neta@marvell.com>
Cc: Kostya Porotchkin <kostap@marvell.com>
Cc: Omri Itach <omrii@marvell.com>
Cc: Igal Liberman <igall@marvell.com>
Cc: Haim Boot <hayim@marvell.com>
Cc: Hanna Hawa <hannah@marvell.com>
9 years ago
|
|
|
/* List terminator */
|
|
|
|
0,
|
|
|
|
}
|
|
|
|
};
|
|
|
|
|
|
|
|
struct mm_region *mem_map = mvebu_mem_map;
|
|
|
|
|
|
|
|
void reset_cpu(ulong ignored)
|
|
|
|
{
|
|
|
|
u32 reg;
|
|
|
|
|
|
|
|
reg = readl(RFU_GLOBAL_SW_RST);
|
|
|
|
reg &= ~(1 << RFU_SW_RESET_OFFSET);
|
|
|
|
writel(reg, RFU_GLOBAL_SW_RST);
|
|
|
|
}
|