upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
u-boot/board/samsung/smdk6400/smdk6400.c

135 lines
3.3 KiB

/*
* (C) Copyright 2002
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
* Marius Groeger <mgroeger@sysgo.de>
*
* (C) Copyright 2002
* David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
*
* (C) Copyright 2008
* Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <netdev.h>
#include <asm/arch/s3c6400.h>
DECLARE_GLOBAL_DATA_PTR;
/* ------------------------------------------------------------------------- */
#define CS8900_Tacs 0x0 /* 0clk address set-up */
#define CS8900_Tcos 0x4 /* 4clk chip selection set-up */
#define CS8900_Tacc 0xE /* 14clk access cycle */
#define CS8900_Tcoh 0x1 /* 1clk chip selection hold */
#define CS8900_Tah 0x4 /* 4clk address holding time */
#define CS8900_Tacp 0x6 /* 6clk page mode access cycle */
#define CS8900_PMC 0x0 /* normal(1data)page mode configuration */
static inline void delay(unsigned long loops)
{
__asm__ volatile ("1:\n" "subs %0, %1, #1\n"
"bne 1b"
: "=r" (loops) : "0" (loops));
}
/*
* Miscellaneous platform dependent initialisations
*/
static void cs8900_pre_init(void)
{
SROM_BW_REG &= ~(0xf << 4);
SROM_BW_REG |= (1 << 7) | (1 << 6) | (1 << 4);
SROM_BC1_REG = ((CS8900_Tacs << 28) + (CS8900_Tcos << 24) +
(CS8900_Tacc << 16) + (CS8900_Tcoh << 12) +
(CS8900_Tah << 8) + (CS8900_Tacp << 4) + CS8900_PMC);
}
int board_init(void)
{
cs8900_pre_init();
/* NOR-flash in SROM0 */
/* Enable WAIT */
SROM_BW_REG |= 4 | 8 | 1;
gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
return 0;
}
void dram_init_banksize(void)
{
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
}
int dram_init(void)
{
gd->ram_size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE,
PHYS_SDRAM_1_SIZE);
return 0;
}
#ifdef CONFIG_DISPLAY_BOARDINFO
int checkboard(void)
{
printf("Board: SMDK6400\n");
return 0;
}
#endif
#ifdef CONFIG_ENABLE_MMU
ulong virt_to_phy_smdk6400(ulong addr)
{
if ((0xc0000000 <= addr) && (addr < 0xc8000000))
return addr - 0xc0000000 + 0x50000000;
else
printf("do not support this address : %08lx\n", addr);
return addr;
}
#endif
ulong board_flash_get_legacy (ulong base, int banknum, flash_info_t *info)
{
if (banknum == 0) { /* non-CFI boot flash */
info->portwidth = FLASH_CFI_16BIT;
info->chipwidth = FLASH_CFI_BY16;
info->interface = FLASH_CFI_X16;
return 1;
} else
return 0;
}
#ifdef CONFIG_CMD_NET
int board_eth_init(bd_t *bis)
{
int rc = 0;
#ifdef CONFIG_CS8900
rc = cs8900_initialize(0, CONFIG_CS8900_BASE);
#endif
return rc;
}
#endif