|
|
|
|
|
Freescale MCF5373EVB ColdFire Development Board
|
|
|
|
|
|
================================================
|
|
|
|
|
|
|
|
|
|
|
|
TsiChung Liew(Tsi-Chung.Liew@freescale.com)
|
|
|
|
|
|
Created 11/08/07
|
|
|
|
|
|
===========================================
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Changed files:
|
|
|
|
|
|
==============
|
|
|
|
|
|
|
|
|
|
|
|
- board/freescale/m5373evb/m5373evb.c Dram setup
|
|
|
|
|
|
- board/freescale/m5373evb/mii.c Mii access
|
|
|
|
|
|
- board/freescale/m5373evb/Makefile Makefile
|
|
|
|
|
|
- board/freescale/m5373evb/config.mk config make
|
|
|
|
|
|
- board/freescale/m5373evb/u-boot.lds Linker description
|
|
|
|
|
|
|
|
|
|
|
|
- cpu/mcf532x/cpu.c cpu specific code
|
|
|
|
|
|
- cpu/mcf532x/cpu_init.c FBCS, Mux pins, icache and RTC extra regs
|
|
|
|
|
|
- cpu/mcf532x/interrupts.c cpu specific interrupt support
|
|
|
|
|
|
- cpu/mcf532x/speed.c system, pci, flexbus, and cpu clock
|
|
|
|
|
|
- cpu/mcf532x/Makefile Makefile
|
|
|
|
|
|
- cpu/mcf532x/config.mk config make
|
|
|
|
|
|
- cpu/mcf532x/start.S start up assembly code
|
|
|
|
|
|
|
|
|
|
|
|
- doc/README.m5373evb This readme file
|
|
|
|
|
|
|
|
|
|
|
|
- drivers/net/mcffec.c ColdFire common FEC driver
|
|
|
|
|
|
- drivers/serial/mcfuart.c ColdFire common UART driver
|
|
|
|
|
|
- drivers/rtc/mcfrtc.c Realtime clock Driver
|
|
|
|
|
|
|
|
|
|
|
|
- include/asm-m68k/bitops.h Bit operation function export
|
|
|
|
|
|
- include/asm-m68k/byteorder.h Byte order functions
|
|
|
|
|
|
- include/asm-m68k/fec.h FEC structure and definition
|
|
|
|
|
|
- include/asm-m68k/fsl_i2c.h I2C structure and definition
|
|
|
|
|
|
- include/asm-m68k/global_data.h Global data structure
|
|
|
|
|
|
- include/asm-m68k/immap.h ColdFire specific header file and driver macros
|
|
|
|
|
|
- include/asm-m68k/immap_532x.h mcf532x specific header file
|
|
|
|
|
|
- include/asm-m68k/io.h io functions
|
|
|
|
|
|
- include/asm-m68k/m532x.h mcf532x specific header file
|
|
|
|
|
|
- include/asm-m68k/posix_types.h Posix
|
|
|
|
|
|
- include/asm-m68k/processor.h header file
|
|
|
|
|
|
- include/asm-m68k/ptrace.h Exception structure
|
|
|
|
|
|
- include/asm-m68k/rtc.h Realtime clock header file
|
|
|
|
|
|
- include/asm-m68k/string.h String function export
|
|
|
|
|
|
- include/asm-m68k/timer.h Timer structure and definition
|
|
|
|
|
|
- include/asm-m68k/types.h Data types definition
|
|
|
|
|
|
- include/asm-m68k/uart.h Uart structure and definition
|
|
|
|
|
|
- include/asm-m68k/u-boot.h u-boot structure
|
|
|
|
|
|
|
|
|
|
|
|
- include/configs/M5373EVB.h Board specific configuration file
|
|
|
|
|
|
|
|
|
|
|
|
- lib_m68k/board.c board init function
|
|
|
|
|
|
- lib_m68k/cache.c
|
|
|
|
|
|
- lib_m68k/interrupts Coldfire common interrupt functions
|
|
|
|
|
|
- lib_m68k/m68k_linux.c
|
|
|
|
|
|
- lib_m68k/time.c Timer functions (Dma timer and PIT)
|
|
|
|
|
|
- lib_m68k/traps.c Exception init code
|
|
|
|
|
|
|
|
|
|
|
|
1 MCF5373 specific Options/Settings
|
|
|
|
|
|
====================================
|
|
|
|
|
|
1.1 pre-loader is no longer suppoer in thie coldfire family
|
|
|
|
|
|
|
|
|
|
|
|
1.2 Configuration settings for M5373EVB Development Board
|
|
|
|
|
|
CONFIG_MCF532x -- define for all MCF532x CPUs
|
|
|
|
|
|
CONFIG_M5373 -- define for all Freescale MCF5373 CPUs
|
|
|
|
|
|
CONFIG_M5373EVB -- define for M5373EVB board
|
|
|
|
|
|
|
|
|
|
|
|
CONFIG_MCFUART -- define to use common CF Uart driver
|
|
|
|
|
|
CONFIG_SYS_UART_PORT -- define UART port number, start with 0, 1 and 2
|
|
|
|
|
|
CONFIG_BAUDRATE -- define UART baudrate
|
|
|
|
|
|
|
|
|
|
|
|
CONFIG_MCFRTC -- define to use common CF RTC driver
|
|
|
|
|
|
CONFIG_SYS_MCFRTC_BASE -- provide base address for RTC in immap.h
|
|
|
|
|
|
CONFIG_SYS_RTC_OSCILLATOR -- define RTC clock frequency
|
|
|
|
|
|
RTC_DEBUG -- define to show RTC debug message
|
|
|
|
|
|
CONFIG_CMD_DATE -- enable to use date feature in u-boot
|
|
|
|
|
|
|
|
|
|
|
|
CONFIG_MCFFEC -- define to use common CF FEC driver
|
|
|
|
|
|
CONFIG_NET_MULTI -- define to use multi FEC in u-boot
|
|
|
|
|
|
CONFIG_MII -- enable to use MII driver
|
|
|
|
|
|
CONFIG_CF_DOMII -- enable to use MII feature in cmd_mii.c
|
|
|
|
|
|
CONFIG_SYS_DISCOVER_PHY -- enable PHY discovery
|
|
|
|
|
|
CONFIG_SYS_RX_ETH_BUFFER -- Set FEC Receive buffer
|
|
|
|
|
|
CONFIG_SYS_FAULT_ECHO_LINK_DOWN--
|
|
|
|
|
|
CONFIG_SYS_FEC0_PINMUX -- Set FEC0 Pin configuration
|
|
|
|
|
|
CONFIG_SYS_FEC0_MIIBASE -- Set FEC0 MII base register
|
|
|
|
|
|
MCFFEC_TOUT_LOOP -- set FEC timeout loop
|
|
|
|
|
|
|
|
|
|
|
|
CONFIG_MCFTMR -- define to use DMA timer
|
|
|
|
|
|
CONFIG_MCFPIT -- define to use PIT timer
|
|
|
|
|
|
|
|
|
|
|
|
CONFIG_FSL_I2C -- define to use FSL common I2C driver
|
|
|
|
|
|
CONFIG_HARD_I2C -- define for I2C hardware support
|
|
|
|
|
|
CONFIG_SOFT_I2C -- define for I2C bit-banged
|
|
|
|
|
|
CONFIG_SYS_I2C_SPEED -- define for I2C speed
|
|
|
|
|
|
CONFIG_SYS_I2C_SLAVE -- define for I2C slave address
|
|
|
|
|
|
CONFIG_SYS_I2C_OFFSET -- define for I2C base address offset
|
|
|
|
|
|
CONFIG_SYS_IMMR -- define for MBAR offset
|
|
|
|
|
|
|
|
|
|
|
|
CONFIG_SYS_MBAR -- define MBAR offset
|
|
|
|
|
|
|
|
|
|
|
|
CONFIG_MONITOR_IS_IN_RAM -- Not support
|
|
|
|
|
|
|
|
|
|
|
|
CONFIG_SYS_INIT_RAM_ADDR -- defines the base address of the MCF5373 internal SRAM
|
|
|
|
|
|
|
|
|
|
|
|
CONFIG_SYS_CSn_BASE -- defines the Chip Select Base register
|
|
|
|
|
|
CONFIG_SYS_CSn_MASK -- defines the Chip Select Mask register
|
|
|
|
|
|
CONFIG_SYS_CSn_CTRL -- defines the Chip Select Control register
|
|
|
|
|
|
|
|
|
|
|
|
CONFIG_SYS_SDRAM_BASE -- defines the DRAM Base
|
|
|
|
|
|
|
|
|
|
|
|
2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL
|
|
|
|
|
|
===========================================
|
|
|
|
|
|
2.1. System memory map:
|
|
|
|
|
|
Flash: 0x00000000-0x3FFFFFFF (1024MB)
|
|
|
|
|
|
DDR: 0x40000000-0x7FFFFFFF (1024MB)
|
|
|
|
|
|
SRAM: 0x80000000-0x8FFFFFFF (256MB)
|
|
|
|
|
|
IP: 0xF0000000-0xFFFFFFFF (256MB)
|
|
|
|
|
|
|
|
|
|
|
|
2.2. For the initial bringup, we adopted a consistent memory scheme between u-boot and
|
|
|
|
|
|
linux kernel, you can customize it based on your system requirements:
|
|
|
|
|
|
Flash0: 0x00000000-0x00FFFFFF (16MB)
|
|
|
|
|
|
|
|
|
|
|
|
DDR: 0x40000000-0x4FFFFFFF (256MB)
|
|
|
|
|
|
SRAM: 0x80000000-0x80007FFF (32KB)
|
|
|
|
|
|
IP: 0xFC000000-0xFC0FFFFF (64KB)
|
|
|
|
|
|
|
|
|
|
|
|
3. COMPILATION
|
|
|
|
|
|
==============
|
|
|
|
|
|
3.1 To create U-Boot the gcc-4.1-xx compiler set (ColdFire ELF or
|
|
|
|
|
|
uClinux version) from codesourcery.com was used. Download it from:
|
|
|
|
|
|
http://www.codesourcery.com/gnu_toolchains/coldfire/download.html
|
|
|
|
|
|
|
|
|
|
|
|
3.2 Compilation
|
|
|
|
|
|
export CROSS_COMPILE=cross-compile-prefix
|
|
|
|
|
|
cd u-boot-1.x.x
|
|
|
|
|
|
make distclean
|
|
|
|
|
|
make M5373EVB_config
|
|
|
|
|
|
make
|
|
|
|
|
|
|
|
|
|
|
|
4. SCREEN DUMP
|
|
|
|
|
|
==============
|
|
|
|
|
|
4.1 M5373EVB Development board
|
|
|
|
|
|
(NOTE: May not show exactly the same)
|
|
|
|
|
|
|
|
|
|
|
|
U-Boot 1.3.0 (Nov 8 2007 - 12:44:08)
|
|
|
|
|
|
|
|
|
|
|
|
CPU: Freescale MCF5373 (Mask:65 Version:1)
|
|
|
|
|
|
CPU CLK 240 Mhz BUS CLK 80 Mhz
|
|
|
|
|
|
Board: Freescale FireEngine 5373 EVB
|
|
|
|
|
|
I2C: ready
|
|
|
|
|
|
DRAM: 32 MB
|
|
|
|
|
|
FLASH: 2 MB
|
|
|
|
|
|
In: serial
|
|
|
|
|
|
Out: serial
|
|
|
|
|
|
Err: serial
|
|
|
|
|
|
NAND: 16 MiB
|
|
|
|
|
|
Net: FEC0
|
|
|
|
|
|
-> print
|
|
|
|
|
|
bootdelay=1
|
|
|
|
|
|
baudrate=115200
|
|
|
|
|
|
ethaddr=00:e0:0c:bc:e5:60
|
|
|
|
|
|
hostname=M5373EVB
|
|
|
|
|
|
netdev=eth0
|
|
|
|
|
|
loadaddr=40010000
|
|
|
|
|
|
load=tftp ${loadaddr) ${u-boot}
|
|
|
|
|
|
upd=run load; run prog
|
|
|
|
|
|
prog=prot off 0 2ffff;era 0 2ffff;cp.b ${loadaddr} 0 ${filesize};save
|
|
|
|
|
|
ethact=FEC0
|
|
|
|
|
|
u-boot=u-boot.bin
|
|
|
|
|
|
gatewayip=192.168.1.1
|
|
|
|
|
|
netmask=255.255.255.0
|
|
|
|
|
|
ipaddr=192.168.1.3
|
|
|
|
|
|
serverip=192.168.1.2
|
|
|
|
|
|
stdin=serial
|
|
|
|
|
|
stdout=serial
|
|
|
|
|
|
stderr=serial
|
|
|
|
|
|
mem=261632k
|
|
|
|
|
|
|
|
|
|
|
|
Environment size: 401/8188 bytes
|
|
|
|
|
|
-> bdinfo
|
|
|
|
|
|
memstart = 0x40000000
|
|
|
|
|
|
memsize = 0x02000000
|
|
|
|
|
|
flashstart = 0x00000000
|
|
|
|
|
|
flashsize = 0x00200000
|
|
|
|
|
|
flashoffset = 0x00000000
|
|
|
|
|
|
sramstart = 0x80000000
|
|
|
|
|
|
sramsize = 0x00008000
|
|
|
|
|
|
mbar = 0xFC000000
|
|
|
|
|
|
busfreq = 80 MHz
|
|
|
|
|
|
ethaddr = 00:E0:0C:BC:E5:60
|
|
|
|
|
|
ip_addr = 192.168.1.3
|
|
|
|
|
|
baudrate = 115200 bps
|
|
|
|
|
|
->
|
|
|
|
|
|
-> help
|
|
|
|
|
|
? - alias for 'help'
|
|
|
|
|
|
autoscr - run script from memory
|
|
|
|
|
|
base - print or set address offset
|
|
|
|
|
|
bdinfo - print Board Info structure
|
|
|
|
|
|
boot - boot default, i.e., run 'bootcmd'
|
|
|
|
|
|
bootd - boot default, i.e., run 'bootcmd'
|
|
|
|
|
|
bootelf - Boot from an ELF image in memory
|
|
|
|
|
|
bootm - boot application image from memory
|
|
|
|
|
|
bootp - boot image via network using BootP/TFTP protocol
|
|
|
|
|
|
bootvx - Boot vxWorks from an ELF image
|
|
|
|
|
|
cmp - memory compare
|
|
|
|
|
|
coninfo - print console devices and information
|
|
|
|
|
|
cp - memory copy
|
|
|
|
|
|
crc32 - checksum calculation
|
|
|
|
|
|
date - get/set/reset date & time
|
|
|
|
|
|
dcache - enable or disable data cache
|
|
|
|
|
|
echo - echo args to console
|
|
|
|
|
|
erase - erase FLASH memory
|
|
|
|
|
|
flinfo - print FLASH memory information
|
|
|
|
|
|
go - start application at address 'addr'
|
|
|
|
|
|
help - print online help
|
|
|
|
|
|
i2c - I2C sub-system
|
|
|
|
|
|
icache - enable or disable instruction cache
|
|
|
|
|
|
iminfo - print header information for application image
|
|
|
|
|
|
imls - list all images found in flash
|
|
|
|
|
|
itest - return true/false on integer compare
|
|
|
|
|
|
loadb - load binary file over serial line (kermit mode)
|
|
|
|
|
|
loads - load S-Record file over serial line
|
|
|
|
|
|
loady - load binary file over serial line (ymodem mode)
|
|
|
|
|
|
loop - infinite loop on address range
|
|
|
|
|
|
ls - list files in a directory (default /)
|
|
|
|
|
|
md - memory display
|
|
|
|
|
|
mii - MII utility commands
|
|
|
|
|
|
mm - memory modify (auto-incrementing)
|
|
|
|
|
|
mtest - simple RAM test
|
|
|
|
|
|
mw - memory write (fill)
|
|
|
|
|
|
nand - NAND sub-system
|
|
|
|
|
|
nboot - boot from NAND device
|
|
|
|
|
|
nfs - boot image via network using NFS protocol
|
|
|
|
|
|
nm - memory modify (constant address)
|
|
|
|
|
|
ping - send ICMP ECHO_REQUEST to network host
|
|
|
|
|
|
printenv- print environment variables
|
|
|
|
|
|
protect - enable or disable FLASH write protection
|
|
|
|
|
|
rarpboot- boot image via network using RARP/TFTP protocol
|
|
|
|
|
|
reset - Perform RESET of the CPU
|
|
|
|
|
|
run - run commands in an environment variable
|
|
|
|
|
|
saveenv - save environment variables to persistent storage
|
|
|
|
|
|
setenv - set environment variables
|
|
|
|
|
|
sleep - delay execution for some time
|
|
|
|
|
|
tftpboot- boot image via network using TFTP protocol
|
|
|
|
|
|
version - print monitor version
|
|
|
|
|
|
-> tftp 0x40800000 uImage
|
|
|
|
|
|
Using FEC0 device
|
|
|
|
|
|
TFTP from server 192.168.1.3; our IP address is 192.168.1.3 Filename 'uImage'.
|
|
|
|
|
|
Load address: 0x40800000
|
|
|
|
|
|
Loading: #################################################################
|
|
|
|
|
|
#################################################################
|
|
|
|
|
|
##########
|
|
|
|
|
|
done
|
|
|
|
|
|
Bytes transferred = 2053270 (1f5496 hex)
|
|
|
|
|
|
-> bootm 0x40800000
|
|
|
|
|
|
## Booting image at 40800000 ...
|
|
|
|
|
|
Image Name: Linux Kernel Image
|
|
|
|
|
|
Created: 2007-11-07 20:33:08 UTC
|
|
|
|
|
|
Image Type: M68K Linux Kernel Image (gzip compressed)
|
|
|
|
|
|
Data Size: 2053206 Bytes = 2 MB
|
|
|
|
|
|
Load Address: 40020000
|
|
|
|
|
|
Entry Point: 40020000
|
|
|
|
|
|
Verifying Checksum ... OK
|
|
|
|
|
|
Uncompressing Kernel Image ... OK
|
|
|
|
|
|
Linux version 2.6.22-uc1 (mattw@loa) (gcc version 4.2.1 (Sourcery G++ Lite 4.2-7
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
uClinux/COLDFIRE(m537x)
|
|
|
|
|
|
COLDFIRE port done by Greg Ungerer, gerg@snapgear.com Flat model support (C) 1998,1999 Kenneth Albanowski, D. Jeff Dionne Built 1 zonelists. Total pages: 8128 Kernel command line: rootfstype=romfs PID hash table entries: 128 (order: 7, 512 bytes) Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) Memory available: 28092k/32768k RAM, (1788k kernel code, 244k data) Mount-cache hash table entries: 512
|
|
|
|
|
|
NET: Registered protocol family 16
|
|
|
|
|
|
USB-MCF537x: (HOST module) EHCI device is registered
|
|
|
|
|
|
USB-MCF537x: (OTG module) EHCI device is registered
|
|
|
|
|
|
USB-MCF537x: (OTG module) UDC device is registered
|
|
|
|
|
|
usbcore: registered new interface driver usbfs
|
|
|
|
|
|
usbcore: registered new interface driver hub
|
|
|
|
|
|
usbcore: registered new device driver usb
|
|
|
|
|
|
NET: Registered protocol family 2
|
|
|
|
|
|
IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 1024 (order: 1, 8192 bytes) TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
|
|
|
|
|
|
TCP: Hash tables configured (established 1024 bind 1024) TCP reno registered
|
|
|
|
|
|
JFFS2 version 2.2. (NAND) <EFBFBD> 2001-2006 Red Hat, Inc.
|
|
|
|
|
|
io scheduler noop registered
|
|
|
|
|
|
io scheduler cfq registered (default)
|
|
|
|
|
|
ColdFire internal UART serial driver version 1.00 ttyS0 at 0xfc060000 (irq = 90) is a builtin ColdFire UART
|
|
|
|
|
|
ttyS1 at 0xfc064000 (irq = 91) is a builtin ColdFire UART
|
|
|
|
|
|
ttyS2 at 0xfc068000 (irq = 92) is a builtin ColdFire UART RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
|
|
|
|
|
|
loop: module loaded
|
|
|
|
|
|
nbd: registered device at major 43
|
|
|
|
|
|
usbcore: registered new interface driver ub FEC ENET Version 0.2
|
|
|
|
|
|
fec: PHY @ 0x1, ID 0x20005c90 -- DP83848
|
|
|
|
|
|
eth0: ethernet 00:e0:0c:bc:e5:60
|
|
|
|
|
|
uclinux[mtd]: RAM probe address=0x4021c22c size=0x22b000 Creating 1 MTD partitions on "RAM":
|
|
|
|
|
|
0x00000000-0x0022b000 : "ROMfs"
|
|
|
|
|
|
uclinux[mtd]: set ROMfs to be root filesystem NAND device: Manufacturer ID: 0x20, Chip ID: 0x73 (ST Micro NAND 16MiB 3,3V 8-b) Scanning device for bad blocks Creating 1 MTD partitions on "NAND 16MiB 3,3V 8-bit":
|
|
|
|
|
|
0x00000000-0x01000000 : "M53xx flash partition 1"
|
|
|
|
|
|
QSPI: spi->max_speed_hz 300000
|
|
|
|
|
|
QSPI: Baud set to 255
|
|
|
|
|
|
SPI: Coldfire master initialized
|
|
|
|
|
|
M537x - Disable UART1 when using Audio
|
|
|
|
|
|
udc: Freescale MCF53xx UDC driver version 27 October 2006 init
|
|
|
|
|
|
udc: MCF53xx USB Device is found. ID=0x5 Rev=0x41 i2c /dev entries driver
|
|
|
|
|
|
usbcore: registered new interface driver usbhid
|
|
|
|
|
|
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver TCP cubic registered
|
|
|
|
|
|
NET: Registered protocol family 1
|
|
|
|
|
|
NET: Registered protocol family 17
|
|
|
|
|
|
VFS: Mounted root (romfs filesystem) readonly.
|
|
|
|
|
|
Freeing unused kernel memory: 64k freed (0x401f5000 - 0x40204000) init started: BusyBox v1.00 (2007.11.07-19:57+0000) multi-call binary?Setting e Mounting filesystems
|
|
|
|
|
|
mount: Mounting devpts on /dev/pts failed: No such device
|
|
|
|
|
|
mount: Mounting usbfs on /proc/bus/usb failed: No such file or directory Starting syslogd and klogd Setting up networking on loopback device:
|
|
|
|
|
|
Setting up networking on eth0:
|
|
|
|
|
|
info, udhcpc (v0.9.9-pre) started
|
|
|
|
|
|
eth0: config: auto-negotiation on, 100FDX, 100HDX, 10FDX, 10HDX.
|
|
|
|
|
|
debug, Sending discover...
|
|
|
|
|
|
debug, Sending discover...
|
|
|
|
|
|
debug, Sending select for 172.27.0.130...
|
|
|
|
|
|
info, Lease of 172.27.0.130 obtained, lease time 43200 deleting routers
|
|
|
|
|
|
route: SIOC[ADD|DEL]RT: No such process
|
|
|
|
|
|
adding dns 172.27.0.1
|
|
|
|
|
|
Starting the boa webserver:
|
|
|
|
|
|
Setting time from ntp server: ntp.cs.strath.ac.uk
|
|
|
|
|
|
ntp.cs.strath.ac.uk: Unknown host
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BusyBox v1.00 (2007.11.07-19:57+0000) Built-in shell (msh) Enter 'help' for a list of built-in commands.
|
|
|
|
|
|
|
|
|
|
|
|
#
|
