upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
u-boot/board/ti/ks2_evm/ddr3_k2hk.c

98 lines
2.4 KiB

/*
* Keystone2: DDR3 initialization
*
* (C) Copyright 2012-2014
* Texas Instruments Incorporated, <www.ti.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include "ddr3_cfg.h"
#include <asm/arch/ddr3.h>
#include <asm/arch/hardware.h>
struct pll_init_data ddr3a_333 = DDR3_PLL_333(A);
struct pll_init_data ddr3a_400 = DDR3_PLL_400(A);
u32 ddr3_init(void)
{
char dimm_name[32];
u32 ddr3_size;
ddr3_get_dimm_params(dimm_name);
printf("Detected SO-DIMM [%s]\n", dimm_name);
if (!strcmp(dimm_name, "18KSF1G72HZ-1G6E2 ")) {
init_pll(&ddr3a_400);
if (cpu_revision() > 0) {
if (cpu_revision() > 1) {
/* PG 2.0 */
/* Reset DDR3A PHY after PLL enabled */
ddr3_reset_ddrphy();
ddr3phy_1600_8g.zq0cr1 |= 0x10000;
ddr3phy_1600_8g.zq1cr1 |= 0x10000;
ddr3phy_1600_8g.zq2cr1 |= 0x10000;
ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC,
&ddr3phy_1600_8g);
} else {
/* PG 1.1 */
ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC,
&ddr3phy_1600_8g);
}
ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE,
&ddr3_1600_8g);
printf("DRAM: Capacity 8 GiB (includes reported below)\n");
ddr3_size = 8;
} else {
ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, &ddr3phy_1600_8g);
ddr3_1600_8g.sdcfg |= 0x1000;
ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE,
&ddr3_1600_8g);
printf("DRAM: Capacity 4 GiB (includes reported below)\n");
ddr3_size = 4;
}
} else if (!strcmp(dimm_name, "SQR-SD3T-2G1333SED")) {
init_pll(&ddr3a_333);
if (cpu_revision() > 0) {
if (cpu_revision() > 1) {
/* PG 2.0 */
/* Reset DDR3A PHY after PLL enabled */
ddr3_reset_ddrphy();
ddr3phy_1333_2g.zq0cr1 |= 0x10000;
ddr3phy_1333_2g.zq1cr1 |= 0x10000;
ddr3phy_1333_2g.zq2cr1 |= 0x10000;
ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC,
&ddr3phy_1333_2g);
} else {
/* PG 1.1 */
ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC,
&ddr3phy_1333_2g);
}
ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE,
&ddr3_1333_2g);
ddr3_size = 2;
printf("DRAM: 2 GiB");
} else {
ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, &ddr3phy_1333_2g);
ddr3_1333_2g.sdcfg |= 0x1000;
ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE,
&ddr3_1333_2g);
ddr3_size = 1;
printf("DRAM: 1 GiB");
}
} else {
printf("Unknown SO-DIMM. Cannot configure DDR3\n");
while (1)
;
}
/* Apply the workaround for PG 1.0 and 1.1 Silicons */
if (cpu_revision() <= 1)
ddr3_err_reset_workaround();
return ddr3_size;
}