Whitebox
/
u-boot
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Remove various unused interrupt related code

Browse Source 
With d53ecad92f some unused interrupt related code was removed.
However all of these options are currently unused.  Rather than migrate
some of these options to Kconfig we just remove the code in question.

The only related code changes here are that in some cases we use
CONFIG_STACKSIZE in non-IRQ related context.  In these cases we rename
and move the value local to the code in question.

Fixes: d53ecad92f ("Merge branch 'master' of git://git.denx.de/u-boot-sunxi")
Signed-off-by: Tom Rini <trini@konsulko.com>
master
Tom Rini 7 years ago
parent d53ecad92f
commit 01abae4d04
74 changed files with 5 additions and 345 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 6
      arch/arm/cpu/arm720t/interrupts.c
  2. 1
      arch/arm/cpu/arm920t/Makefile
  3. 1
      arch/arm/cpu/arm920t/s3c24x0/Makefile
  4. 4
      arch/arm/cpu/sa1100/cpu.c
  5. 73
      arch/arm/lib/interrupts.c
  6. 8
      arch/arm/lib/stack.c
  7. 33
      arch/arm/lib/vectors.S
  8. 2
      arch/arm/mach-davinci/misc.c
  9. 3
      arch/arm/mach-keystone/cmd_ddr3.c
  10. 4
      arch/avr32/cpu/exception.c
  11. 18
      arch/nds32/cpu/n1213/start.S
  12. 2
      board/Barix/ipam390/ipam390.c
  13. 2
      board/davinci/da8xxevm/da850evm.c
  14. 2
      board/davinci/da8xxevm/omapl138_lcdk.c
  15. 2
      board/davinci/ea20/ea20.c
  16. 2
      board/lego/ev3/legoev3.c
  17. 2
      board/omicron/calimain/calimain.c
  18. 5
      common/board_f.c
  19. 17
      drivers/net/enc28j60.c
  20. 1
      include/configs/advantech_dms-ba16.h
  21. 3
      include/configs/am335x_igep0033.h
  22. 2
      include/configs/aristainetos-common.h
  23. 2
      include/configs/atngw100.h
  24. 2
      include/configs/atngw100mkii.h
  25. 2
      include/configs/atstk1002.h
  26. 1
      include/configs/bcm23550_w1d.h
  27. 1
      include/configs/bcm28155_ap.h
  28. 1
      include/configs/bcm_ep_board.h
  29. 1
      include/configs/cm_fx6.h
  30. 2
      include/configs/colibri_imx7.h
  31. 6
      include/configs/colibri_vf.h
  32. 7
      include/configs/edb93xx.h
  33. 2
      include/configs/el6x_common.h
  34. 2
      include/configs/embestmx6boards.h
  35. 1
      include/configs/ge_bx50v3.h
  36. 3
      include/configs/grasshopper.h
  37. 1
      include/configs/liteboard.h
  38. 6
      include/configs/ls1021aiot.h
  39. 6
      include/configs/ls1021aqds.h
  40. 6
      include/configs/ls1021atwr.h
  41. 6
      include/configs/ls1043aqds.h
  42. 6
      include/configs/ls1046aqds.h
  43. 2
      include/configs/mx6sabre_common.h
  44. 2
      include/configs/mx6slevk.h
  45. 2
      include/configs/mx6sllevk.h
  46. 2
      include/configs/mx6sxsabreauto.h
  47. 2
      include/configs/mx6sxsabresd.h
  48. 1
      include/configs/mx6ul_14x14_evk.h
  49. 2
      include/configs/mx6ullevk.h
  50. 2
      include/configs/mx7dsabresd.h
  51. 1
      include/configs/mx7ulp_evk.h
  52. 8
      include/configs/nokia_rx51.h
  53. 1
      include/configs/omapl138_lcdk.h
  54. 6
      include/configs/pcm052.h
  55. 1
      include/configs/pic32mzdask.h
  56. 1
      include/configs/pico-imx6ul.h
  57. 6
      include/configs/s32v234evb.h
  58. 3
      include/configs/siemens-am33x-common.h
  59. 2
      include/configs/stm32f429-discovery.h
  60. 1
      include/configs/stm32f746-disco.h
  61. 5
      include/configs/sunxi-common.h
  62. 7
      include/configs/tao3530.h
  63. 3
      include/configs/ti814x_evm.h
  64. 3
      include/configs/ti816x_evm.h
  65. 1
      include/configs/ti_armv7_keystone2.h
  66. 2
      include/configs/tqma6.h
  67. 1
      include/configs/udoo_neo.h
  68. 6
      include/configs/vf610twr.h
  69. 2
      include/configs/vining_2000.h
  70. 2
      include/configs/warp.h
  71. 2
      include/configs/warp7.h
  72. 7
      include/configs/woodburn_common.h
  73. 2
      include/configs/xtfpga.h
  74. 5
      scripts/config_whitelist.txt

6
arch/arm/cpu/arm720t/interrupts.c
Unescape View File

@ -12,12 +12,6 @@
#include <common.h>
#ifdef CONFIG_USE_IRQ
void do_irq (struct pt_regs *pt_regs)
{
}
#endif
#if defined(CONFIG_TEGRA)
static ulong timestamp;
static ulong lastdec;

1
arch/arm/cpu/arm920t/Makefile
Unescape View File

@ -8,7 +8,6 @@
extra-y = start.o
obj-y += cpu.o
obj-$(CONFIG_USE_IRQ) += interrupts.o
obj-$(CONFIG_EP93XX) += ep93xx/
obj-$(CONFIG_IMX) += imx/

1
arch/arm/cpu/arm920t/s3c24x0/Makefile
Unescape View File

@ -5,7 +5,6 @@
# SPDX-License-Identifier: GPL-2.0+
#
obj-$(CONFIG_USE_IRQ) += interrupts.o
obj-$(CONFIG_DISPLAY_CPUINFO) += cpu_info.o
obj-y += speed.o
obj-y += timer.o

4
arch/arm/cpu/sa1100/cpu.c
Unescape View File

@ -19,10 +19,6 @@
#include <asm/system.h>
#include <asm/io.h>
#ifdef CONFIG_USE_IRQ
DECLARE_GLOBAL_DATA_PTR;
#endif
static void cache_flush(void);
int cleanup_before_linux (void)

73
arch/arm/lib/interrupts.c
Unescape View File

@ -26,75 +26,6 @@
DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_USE_IRQ
int interrupt_init (void)
{
unsigned long cpsr;
/*
* setup up stacks if necessary
*/
IRQ_STACK_START = gd->irq_sp - 4;
IRQ_STACK_START_IN = gd->irq_sp + 8;
FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ;
__asm__ __volatile__("mrs %0, cpsr\n"
: "=r" (cpsr)
:
: "memory");
__asm__ __volatile__("msr cpsr_c, %0\n"
"mov sp, %1\n"
:
: "r" (IRQ_MODE | I_BIT | F_BIT | (cpsr & ~FIQ_MODE)),
"r" (IRQ_STACK_START)
: "memory");
__asm__ __volatile__("msr cpsr_c, %0\n"
"mov sp, %1\n"
:
: "r" (FIQ_MODE | I_BIT | F_BIT | (cpsr & ~IRQ_MODE)),
"r" (FIQ_STACK_START)
: "memory");
__asm__ __volatile__("msr cpsr_c, %0"
:
: "r" (cpsr)
: "memory");
return arch_interrupt_init();
}
/* enable IRQ interrupts */
void enable_interrupts (void)
{
unsigned long temp;
__asm__ __volatile__("mrs %0, cpsr\n"
"bic %0, %0, #0x80\n"
"msr cpsr_c, %0"
: "=r" (temp)
:
: "memory");
}
/*
* disable IRQ/FIQ interrupts
* returns true if interrupts had been enabled before we disabled them
*/
int disable_interrupts (void)
{
unsigned long old,temp;
__asm__ __volatile__("mrs %0, cpsr\n"
"orr %1, %0, #0xc0\n"
"msr cpsr_c, %1"
: "=r" (old), "=r" (temp)
:
: "memory");
return (old & 0x80) == 0;
}
#else
int interrupt_init (void)
{
/*
@ -113,8 +44,6 @@ int disable_interrupts (void)
{
return 0;
}
#endif
void bad_mode (void)
{
@ -212,7 +141,6 @@ void do_fiq (struct pt_regs *pt_regs)
bad_mode ();
}
#ifndef CONFIG_USE_IRQ
void do_irq (struct pt_regs *pt_regs)
{
efi_restore_gd();
@ -220,4 +148,3 @@ void do_irq (struct pt_regs *pt_regs)
show_regs (pt_regs);
bad_mode ();
}
#endif

8
arch/arm/lib/stack.c
Unescape View File

@ -25,14 +25,6 @@ int arch_reserve_stacks(void)
gd->irq_sp = gd->start_addr_sp;
# if !defined(CONFIG_ARM64)
# ifdef CONFIG_USE_IRQ
gd->start_addr_sp -= (CONFIG_STACKSIZE_IRQ + CONFIG_STACKSIZE_FIQ);
debug("Reserving %zu Bytes for IRQ stack at: %08lx\n",
CONFIG_STACKSIZE_IRQ + CONFIG_STACKSIZE_FIQ, gd->start_addr_sp);
/* 8-byte alignment for ARM ABI compliance */
gd->start_addr_sp &= ~0x07;
# endif
/* leave 3 words for abort-stack, plus 1 for alignment */
gd->start_addr_sp -= 16;
# endif

33
arch/arm/lib/vectors.S
Unescape View File

@ -128,19 +128,6 @@ fiq:
IRQ_STACK_START_IN:
.word 0x0badc0de
#ifdef CONFIG_USE_IRQ
/* IRQ stack memory (calculated at run-time) */
.globl IRQ_STACK_START
IRQ_STACK_START:
.word 0x0badc0de
/* IRQ stack memory (calculated at run-time) */
.globl FIQ_STACK_START
FIQ_STACK_START:
.word 0x0badc0de
#endif /* CONFIG_USE_IRQ */
@
@ IRQ stack frame.
@
@ -264,24 +251,6 @@ not_used:
bad_save_user_regs
bl do_not_used
#ifdef CONFIG_USE_IRQ
.align 5
irq:
get_irq_stack
irq_save_user_regs
bl do_irq
irq_restore_user_regs
.align 5
fiq:
get_fiq_stack
/* someone ought to write a more effiction fiq_save_user_regs */
irq_save_user_regs
bl do_fiq
irq_restore_user_regs
#else
.align 5
irq:
@ -295,6 +264,4 @@ fiq:
bad_save_user_regs
bl do_fiq
#endif /* CONFIG_USE_IRQ */
#endif /* CONFIG_SPL_BUILD */

2
arch/arm/mach-davinci/misc.c
Unescape View File

@ -107,7 +107,6 @@ void davinci_sync_env_enetaddr(uint8_t *rom_enetaddr)
#endif /* CONFIG_DRIVER_TI_EMAC */
#if defined(CONFIG_SOC_DA8XX)
#ifndef CONFIG_USE_IRQ
void irq_init(void)
{
/*
@ -122,7 +121,6 @@ void irq_init(void)
writel(0xffffffff, &davinci_aintc_regs->ecr2);
writel(0xffffffff, &davinci_aintc_regs->ecr3);
}
#endif
/*
* Enable PSC for various peripherals.

3
arch/arm/mach-keystone/cmd_ddr3.c
Unescape View File

@ -15,12 +15,13 @@
DECLARE_GLOBAL_DATA_PTR;
#define DDR_MIN_ADDR CONFIG_SYS_SDRAM_BASE
#define STACKSIZE (512 << 10) /* 512 KiB */
#define DDR_REMAP_ADDR 0x80000000
#define ECC_START_ADDR1 ((DDR_MIN_ADDR - DDR_REMAP_ADDR) >> 17)
#define ECC_END_ADDR1 (((gd->start_addr_sp - DDR_REMAP_ADDR - \
CONFIG_STACKSIZE) >> 17) - 2)
STACKSIZE) >> 17) - 2)
#define DDR_TEST_BURST_SIZE 1024

4
arch/avr32/cpu/exception.c
Unescape View File

@ -10,6 +10,8 @@
DECLARE_GLOBAL_DATA_PTR;
#define STACKSIZE 2048
static const char * const cpu_modes[8] = {
"Application", "Supervisor", "Interrupt level 0", "Interrupt level 1",
"Interrupt level 2", "Interrupt level 3", "Exception", "NMI"
@ -96,7 +98,7 @@ void do_unknown_exception(unsigned int ecr, struct pt_regs *regs)
printf("CPU Mode: %s\n", cpu_modes[mode]);
/* Avoid exception loops */
if (regs->sp < (gd->start_addr_sp - CONFIG_STACKSIZE) ||
if (regs->sp < (gd->start_addr_sp - STACKSIZE) ||
regs->sp >= gd->start_addr_sp)
printf("\nStack pointer seems bogus, won't do stack dump\n");
else

18
arch/nds32/cpu/n1213/start.S
Unescape View File

@ -90,24 +90,6 @@ _start: j reset
_TEXT_BASE:
.word CONFIG_SYS_TEXT_BASE
/*
* These are defined in the board-specific linker script.
* Subtracting _start from them lets the linker put their
* relative position in the executable instead of leaving
* them null.
*/
#ifdef CONFIG_USE_IRQ
/* IRQ stack memory (calculated at run-time) */
.globl IRQ_STACK_START
IRQ_STACK_START:
.word 0x0badc0de
/* IRQ stack memory (calculated at run-time) */
.globl FIQ_STACK_START
FIQ_STACK_START:
.word 0x0badc0de
#endif
/* IRQ stack memory (calculated at run-time) + 8 bytes */
.globl IRQ_STACK_START_IN
IRQ_STACK_START_IN:

2
board/Barix/ipam390/ipam390.c
Unescape View File

@ -188,9 +188,7 @@ int board_early_init_f(void)
int board_init(void)
{
#ifndef CONFIG_USE_IRQ
irq_init();
#endif
/* arch number of the board */
gd->bd->bi_arch_number = MACH_TYPE_DAVINCI_DA850_EVM;

2
board/davinci/da8xxevm/da850evm.c
Unescape View File

@ -323,9 +323,7 @@ int board_early_init_f(void)
int board_init(void)
{
#ifndef CONFIG_USE_IRQ
irq_init();
#endif
#ifdef CONFIG_NAND_DAVINCI
/*

2
board/davinci/da8xxevm/omapl138_lcdk.c
Unescape View File

@ -171,9 +171,7 @@ int board_early_init_f(void)
int board_init(void)
{
#ifndef CONFIG_USE_IRQ
irq_init();
#endif
/* arch number of the board */
gd->bd->bi_arch_number = MACH_TYPE_OMAPL138_LCDK;

2
board/davinci/ea20/ea20.c
Unescape View File

@ -203,9 +203,7 @@ int board_early_init_f(void)
/* Set LCD_B_PWR low to power down LCD Backlight*/
gpio_direction_output(102, 0);
#ifndef CONFIG_USE_IRQ
irq_init();
#endif
/*
* NAND CS setup - cycle counts based on da850evm NAND timings in the

2
board/lego/ev3/legoev3.c
Unescape View File

@ -145,9 +145,7 @@ int board_early_init_f(void)
int board_init(void)
{
#ifndef CONFIG_USE_IRQ
irq_init();
#endif
/* arch number of the board */
/* LEGO didn't register for a unique number and uses da850evm */

2
board/omicron/calimain/calimain.c
Unescape View File

@ -100,9 +100,7 @@ int board_init(void)
{
int val;
#ifndef CONFIG_USE_IRQ
irq_init();
#endif
/* address of boot parameters */
gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR;

5
common/board_f.c
Unescape View File

@ -137,11 +137,6 @@ static int display_text_info(void)
text_base, bss_start, bss_end);
#endif
#ifdef CONFIG_USE_IRQ
debug("IRQ Stack: %08lx\n", IRQ_STACK_START);
debug("FIQ Stack: %08lx\n", FIQ_STACK_START);
#endif
return 0;
}

17
drivers/net/enc28j60.c
Unescape View File

@ -489,10 +489,6 @@ static void enc_poll(enc_dev_t *enc)
u8 eir_reg;
u8 pkt_cnt;
#ifdef CONFIG_USE_IRQ
/* clear global interrupt enable bit in enc28j60 */
enc_bclr(enc, CTL_REG_EIE, ENC_EIE_INTIE);
#endif
(void)enc_r8(enc, CTL_REG_ESTAT);
eir_reg = enc_r8(enc, CTL_REG_EIR);
if (eir_reg & ENC_EIR_TXIF) {
@ -520,10 +516,6 @@ static void enc_poll(enc_dev_t *enc)
printf("%s: tx error\n", enc->dev->name);
enc_bclr(enc, CTL_REG_EIR, ENC_EIR_TXERIF);
}
#ifdef CONFIG_USE_IRQ
/* set global interrupt enable bit in enc28j60 */
enc_bset(enc, CTL_REG_EIE, ENC_EIE_INTIE);
#endif
}
/*
@ -693,15 +685,6 @@ static int enc_setup(enc_dev_t *enc)
/* Reset PDPXMD-bit => half duplex */
enc_phy_write(enc, PHY_REG_PHCON1, 0);
#ifdef CONFIG_USE_IRQ
/* enable interrupts */
enc_bset(enc, CTL_REG_EIE, ENC_EIE_PKTIE);
enc_bset(enc, CTL_REG_EIE, ENC_EIE_TXIE);
enc_bset(enc, CTL_REG_EIE, ENC_EIE_RXERIE);
enc_bset(enc, CTL_REG_EIE, ENC_EIE_TXERIE);
enc_bset(enc, CTL_REG_EIE, ENC_EIE_INTIE);
#endif
return 0;
}

1
include/configs/advantech_dms-ba16.h
Unescape View File

@ -230,7 +230,6 @@
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
#define CONFIG_CMDLINE_EDITING
#define CONFIG_STACKSIZE (128 * 1024)
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS 1

3
include/configs/am335x_igep0033.h
Unescape View File

@ -117,9 +117,6 @@
"1m(uboot),256k(environment),"\
"-(filesystem)"
/* Unsupported features */
#undef CONFIG_USE_IRQ
/* SPL */
#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/am33xx/u-boot-spl.lds"

2
include/configs/aristainetos-common.h
Unescape View File

@ -148,8 +148,6 @@
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x100000)
#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
#define CONFIG_STACKSIZE (128 * 1024)
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR

2
include/configs/atngw100.h
Unescape View File

@ -52,8 +52,6 @@
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
#define CONFIG_STACKSIZE (2048)
#define CONFIG_BOOTARGS \
"console=ttyS0 root=/dev/mtdblock1 rootfstype=jffs2"
#define CONFIG_BOOTCOMMAND \

2
include/configs/atngw100mkii.h
Unescape View File

@ -71,8 +71,6 @@
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
#define CONFIG_STACKSIZE (2048)
#define CONFIG_BOOTARGS \
"root=mtd:main rootfstype=jffs2"
#define CONFIG_BOOTCOMMAND \

2
include/configs/atstk1002.h
Unescape View File

@ -69,8 +69,6 @@
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
#define CONFIG_STACKSIZE (2048)
#define CONFIG_BOOTARGS \
"console=ttyS0 root=/dev/mmcblk0p1 fbmem=600k rootwait=1"

1
include/configs/bcm23550_w1d.h
Unescape View File

@ -25,7 +25,6 @@
#define CONFIG_NR_DRAM_BANKS 1
#define CONFIG_SYS_MALLOC_LEN SZ_4M /* see armv7/start.S. */
#define CONFIG_STACKSIZE SZ_256K
/* GPIO Driver */
#define CONFIG_KONA_GPIO

1
include/configs/bcm28155_ap.h
Unescape View File

@ -24,7 +24,6 @@
#define CONFIG_NR_DRAM_BANKS 1
#define CONFIG_SYS_MALLOC_LEN SZ_4M /* see armv7/start.S. */
#define CONFIG_STACKSIZE SZ_256K
/* GPIO Driver */
#define CONFIG_KONA_GPIO

1
include/configs/bcm_ep_board.h
Unescape View File

@ -28,7 +28,6 @@
#define CONFIG_NR_DRAM_BANKS 1
#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
#define CONFIG_STACKSIZE (256 * 1024)
/* Some commands use this as the default load address */
#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE

1
include/configs/cm_fx6.h
Unescape View File

@ -237,7 +237,6 @@
#define CONFIG_SERIAL_TAG
/* misc */
#define CONFIG_STACKSIZE (128 * 1024)
#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
#define CONFIG_MISC_INIT_R

2
include/configs/colibri_imx7.h
Unescape View File

@ -136,8 +136,6 @@
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
#define CONFIG_SYS_HZ 1000
#define CONFIG_STACKSIZE SZ_128K
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR

6
include/configs/colibri_vf.h
Unescape View File

@ -150,12 +150,6 @@
#define CONFIG_SYS_HZ 1000
#define CONFIG_CMDLINE_EDITING
/*
* Stack sizes
* The stack sizes are set up in start.S using the settings below
*/
#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */
/* Physical memory map */
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM (0x80000000)

7
include/configs/edb93xx.h
Unescape View File

@ -74,7 +74,6 @@
#define CONFIG_EP93XX 1 /* This is a Cirrus Logic 93xx SoC */
#define CONFIG_SYS_CLK_FREQ 14745600 /* EP93xx has a 14.7456 clock */
#undef CONFIG_USE_IRQ /* Don't need IRQ/FIQ */
/* Monitor configuration */
#undef CONFIG_CMD_DATE
@ -161,12 +160,6 @@
/* Run-time memory allocatons */
#define CONFIG_SYS_GBL_DATA_SIZE 128
#define CONFIG_STACKSIZE (128 * 1024)
#if defined(CONFIG_USE_IRQ)
#define CONFIG_STACKSIZE_IRQ (4 * 1024)
#define CONFIG_STACKSIZE_FIQ (4 * 1024)
#endif
#define CONFIG_SYS_MALLOC_LEN (512 * 1024)

2
include/configs/el6x_common.h
Unescape View File

@ -99,8 +99,6 @@
#define CONFIG_SYS_MEMTEST_END 0x10800000
#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
#define CONFIG_STACKSIZE (128 * 1024)
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR

2
include/configs/embestmx6boards.h
Unescape View File

@ -76,8 +76,6 @@
#define CONFIG_SYS_MEMTEST_END 0x10010000
#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
#define CONFIG_STACKSIZE (128 * 1024)
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR

1
include/configs/ge_bx50v3.h
Unescape View File

@ -260,7 +260,6 @@
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
#define CONFIG_CMDLINE_EDITING
#define CONFIG_STACKSIZE (128 * 1024)
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS 1

3
include/configs/grasshopper.h
Unescape View File

@ -69,9 +69,6 @@
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
#define CONFIG_STACKSIZE (2048)
/*
* After booting the board for the first time, new ethernet addresses
* should be generated and assigned to the environment variables

1
include/configs/liteboard.h
Unescape View File

@ -113,7 +113,6 @@
#define CONFIG_SYS_HZ 1000
#define CONFIG_CMDLINE_EDITING
#define CONFIG_STACKSIZE SZ_128K
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS 1

6
include/configs/ls1021aiot.h
Unescape View File

@ -269,12 +269,6 @@
#define CONFIG_LS102XA_STREAM_ID
/*
* Stack sizes
* The stack sizes are set up in start.S using the settings below
*/
#define CONFIG_STACKSIZE (30 * 1024)
#define CONFIG_SYS_INIT_SP_OFFSET \
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \

6
include/configs/ls1021aqds.h
Unescape View File

@ -537,12 +537,6 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_LS102XA_STREAM_ID
/*
* Stack sizes
* The stack sizes are set up in start.S using the settings below
*/
#define CONFIG_STACKSIZE (30 * 1024)
#define CONFIG_SYS_INIT_SP_OFFSET \
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \

6
include/configs/ls1021atwr.h
Unescape View File

@ -403,12 +403,6 @@
#define CONFIG_LS102XA_STREAM_ID
/*
* Stack sizes
* The stack sizes are set up in start.S using the settings below
*/
#define CONFIG_STACKSIZE (30 * 1024)
#define CONFIG_SYS_INIT_SP_OFFSET \
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \

6
include/configs/ls1043aqds.h
Unescape View File

@ -396,12 +396,6 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_SYS_HZ 1000
/*
* Stack sizes
* The stack sizes are set up in start.S using the settings below
*/
#define CONFIG_STACKSIZE (30 * 1024)
#define CONFIG_SYS_INIT_SP_OFFSET \
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)

6
include/configs/ls1046aqds.h
Unescape View File

@ -434,12 +434,6 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_SYS_HZ 1000
/*
* Stack sizes
* The stack sizes are set up in start.S using the settings below
*/
#define CONFIG_STACKSIZE (30 * 1024)
#define CONFIG_SYS_INIT_SP_OFFSET \
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)

2
include/configs/mx6sabre_common.h
Unescape View File

@ -180,8 +180,6 @@
#define CONFIG_SYS_MEMTEST_END 0x10010000
#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
#define CONFIG_STACKSIZE (128 * 1024)
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR

2
include/configs/mx6slevk.h
Unescape View File

@ -127,8 +127,6 @@
#define CONFIG_SYS_MEMTEST_START 0x80000000
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + SZ_512M)
#define CONFIG_STACKSIZE SZ_128K
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR

2
include/configs/mx6sllevk.h
Unescape View File

@ -113,8 +113,6 @@
#define CONFIG_SYS_MEMTEST_START 0x80000000
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + SZ_128M)
#define CONFIG_STACKSIZE SZ_128K
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR

2
include/configs/mx6sxsabreauto.h
Unescape View File

@ -95,8 +95,6 @@
#define CONFIG_SYS_MEMTEST_START 0x80000000
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x10000)
#define CONFIG_STACKSIZE SZ_128K
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR

2
include/configs/mx6sxsabresd.h
Unescape View File

@ -123,8 +123,6 @@
#define CONFIG_SYS_MEMTEST_START 0x80000000
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x10000)
#define CONFIG_STACKSIZE SZ_128K
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR

1
include/configs/mx6ul_14x14_evk.h
Unescape View File

@ -150,7 +150,6 @@
#define CONFIG_SYS_HZ 1000
#define CONFIG_CMDLINE_EDITING
#define CONFIG_STACKSIZE SZ_128K
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS 1

2
include/configs/mx6ullevk.h
Unescape View File

@ -137,8 +137,6 @@
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
#define CONFIG_SYS_HZ 1000
#define CONFIG_STACKSIZE SZ_128K
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR

2
include/configs/mx7dsabresd.h
Unescape View File

@ -178,8 +178,6 @@
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
#define CONFIG_SYS_HZ 1000
#define CONFIG_STACKSIZE SZ_128K
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR

1
include/configs/mx7ulp_evk.h
Unescape View File

@ -88,7 +88,6 @@
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_CMDLINE_EDITING
#define CONFIG_STACKSIZE SZ_8K
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS 1

8
include/configs/nokia_rx51.h
Unescape View File

@ -48,7 +48,6 @@
#define V_OSCK 26000000 /* Clock output from T2 */
#define V_SCLK (V_OSCK >> 1)
#undef CONFIG_USE_IRQ /* no support for IRQs */
#define CONFIG_MISC_INIT_R
#define CONFIG_SKIP_LOWLEVEL_INIT /* X-Loader set everything up */
@ -381,13 +380,6 @@ int rx51_kp_getc(struct stdio_dev *sdev);
#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
/*
* Stack sizes
*
* The stack sizes are set up in start.S using the settings below
*/
#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */
/*
* Physical Memory Map
*/
#define CONFIG_NR_DRAM_BANKS 2

1
include/configs/omapl138_lcdk.h
Unescape View File

@ -48,7 +48,6 @@
#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 0x2000000 + 16*1024*1024)
#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
#define CONFIG_STACKSIZE (256*1024) /* regular stack */
#define CONFIG_SYS_DA850_SYSCFG_SUSPSRC ( \
DAVINCI_SYSCFG_SUSPSRC_TIMER0 | \

6
include/configs/pcm052.h
Unescape View File

@ -226,12 +226,6 @@
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
/*
* Stack sizes
* The stack sizes are set up in start.S using the settings below
*/
#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */
/* Physical memory map */
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM (0x80000000)

1
include/configs/pic32mzdask.h
Unescape View File

@ -37,7 +37,6 @@
#define CONFIG_SYS_SDRAM_BASE 0x88000000
#define CONFIG_SYS_MALLOC_LEN (256 << 10)
#define CONFIG_SYS_BOOTPARAMS_LEN (4 << 10)
#define CONFIG_STACKSIZE (4 << 10) /* regular stack */
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MONITOR_LEN (192 << 10)

1
include/configs/pico-imx6ul.h
Unescape View File

@ -117,7 +117,6 @@
#define CONFIG_SYS_HZ 1000
#define CONFIG_CMDLINE_EDITING
#define CONFIG_STACKSIZE SZ_128K
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS 1

6
include/configs/s32v234evb.h
Unescape View File

@ -199,12 +199,6 @@
#define CONFIG_SYS_MALLOC_BASE (DDR_BASE_ADDR)
#endif
/*
* Stack sizes
* The stack sizes are set up in start.S using the settings below
*/
#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */
#if 0
/* Configure PXE */
#define CONFIG_BOOTP_PXE

3
include/configs/siemens-am33x-common.h
Unescape View File

@ -228,9 +228,6 @@
# define CONFIG_ENV_SECT_SIZE (4 << 10) /* 4 KB sectors */
#endif /* SPI support */
/* Unsupported features */
#undef CONFIG_USE_IRQ
#define CONFIG_DRIVER_TI_CPSW
#define CONFIG_MII
#define CONFIG_PHY_GIGE

2
include/configs/stm32f429-discovery.h
Unescape View File

@ -66,8 +66,6 @@
#define CONFIG_SYS_MALLOC_LEN (2 << 20)
#define CONFIG_STACKSIZE (64 << 10)
#define CONFIG_BOOTARGS \
"console=ttyS0,115200 earlyprintk consoleblank=0 ignore_loglevel"
#define CONFIG_BOOTCOMMAND \

1
include/configs/stm32f746-disco.h
Unescape View File

@ -58,7 +58,6 @@
#define CONFIG_SYS_MAXARGS 16
#define CONFIG_SYS_MALLOC_LEN (1 * 1024 * 1024)
#define CONFIG_STACKSIZE (256 * 1024)
#define CONFIG_BOOTARGS \
"console=ttyS0,115200 earlyprintk consoleblank=0 ignore_loglevel"

5
include/configs/sunxi-common.h
Unescape View File

@ -155,11 +155,6 @@
/* standalone support */
#define CONFIG_STANDALONE_LOAD_ADDR CONFIG_SYS_LOAD_ADDR
/* baudrate */
/* The stack sizes are set up in start.S using the settings below */
#define CONFIG_STACKSIZE (256 << 10) /* 256 KiB */
/* FLASH and environment organization */
#define CONFIG_SYS_MONITOR_LEN (768 << 10) /* 768 KiB */

7
include/configs/tao3530.h
Unescape View File

@ -196,13 +196,6 @@
#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
/*
* Stack sizes
*
* The stack sizes are set up in start.S using the settings below
*/
#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */
/*
* Physical Memory Map
*/
#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */

3
include/configs/ti814x_evm.h
Unescape View File

@ -179,9 +179,6 @@
#define CONFIG_SKIP_LOWLEVEL_INIT
#endif
/* Unsupported features */
#undef CONFIG_USE_IRQ
/* Ethernet */
#define CONFIG_DRIVER_TI_CPSW
#define CONFIG_MII

3
include/configs/ti816x_evm.h
Unescape View File

@ -137,7 +137,4 @@
#define CONFIG_SKIP_LOWLEVEL_INIT
#endif
/* Unsupported features */
#undef CONFIG_USE_IRQ
#endif

1
include/configs/ti_armv7_keystone2.h
Unescape View File

@ -28,7 +28,6 @@
#define CONFIG_NR_DRAM_BANKS 2
#define CONFIG_SYS_LPAE_SDRAM_BASE 0x800000000
#define CONFIG_MAX_RAM_BANK_SIZE (2 << 30) /* 2GB */
#define CONFIG_STACKSIZE (512 << 10) /* 512 KiB */
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SPL_TEXT_BASE - \
GENERATED_GBL_DATA_SIZE)

2
include/configs/tqma6.h
Unescape View File

@ -349,8 +349,6 @@
"panicboot=echo No boot device !!! reset\0" \
TQMA6_EXTRA_BOOTDEV_ENV_SETTINGS \
#define CONFIG_STACKSIZE (128u * SZ_1K)
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR

1
include/configs/udoo_neo.h
Unescape View File

@ -69,7 +69,6 @@
/* Miscellaneous configurable options */
#define CONFIG_SYS_MEMTEST_START 0x80000000
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x10000)
#define CONFIG_STACKSIZE SZ_128K
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS 1

6
include/configs/vf610twr.h
Unescape View File

@ -209,12 +209,6 @@
#define CONFIG_SYS_MEMTEST_START 0x80010000
#define CONFIG_SYS_MEMTEST_END 0x87C00000
/*
* Stack sizes
* The stack sizes are set up in start.S using the settings below
*/
#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */
/* Physical memory map */
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM (0x80000000)

2
include/configs/vining_2000.h
Unescape View File

@ -33,8 +33,6 @@
#define CONFIG_SYS_MEMTEST_START 0x80000000
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x10000)
#define CONFIG_STACKSIZE SZ_128K
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR

2
include/configs/warp.h
Unescape View File

@ -35,8 +35,6 @@
#define CONFIG_SYS_MEMTEST_START 0x80000000
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + SZ_256M)
#define CONFIG_STACKSIZE SZ_128K
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR

2
include/configs/warp7.h
Unescape View File

@ -85,8 +85,6 @@
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
#define CONFIG_SYS_HZ 1000
#define CONFIG_STACKSIZE SZ_128K
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR

7
include/configs/woodburn_common.h
Unescape View File

@ -119,13 +119,6 @@
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
/*
* Stack sizes
*
* The stack sizes are set up in start.S using the settings below
*/
#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */
/*
* Physical Memory Map
*/
#define CONFIG_NR_DRAM_BANKS 1

2
include/configs/xtfpga.h
Unescape View File

@ -66,7 +66,6 @@
# define CONFIG_SYS_MONITOR_LEN 0x00040000 /* 256KB */
#endif
#define CONFIG_SYS_STACKSIZE (512 << 10) /* stack 512KB */
#define CONFIG_SYS_MALLOC_LEN (256 << 10) /* heap 256KB */
/* Linux boot param area in RAM (used only when booting linux) */
@ -110,7 +109,6 @@
/* U-Boot general configuration */
/*==============================*/
#undef CONFIG_USE_IRQ /* Keep it simple, poll only */
#define CONFIG_BOARD_POSTCLK_INIT
#define CONFIG_MISC_INIT_R

5
scripts/config_whitelist.txt
Unescape View File

@ -2859,9 +2859,6 @@ CONFIG_SSP1_BASE
CONFIG_SSP2_BASE
CONFIG_SSP3_BASE
CONFIG_STACKBASE
CONFIG_STACKSIZE
CONFIG_STACKSIZE_FIQ
CONFIG_STACKSIZE_IRQ
CONFIG_STANDALONE_LOAD_ADDR
CONFIG_STATIC_BOARD_REV
CONFIG_STATIC_RELA
@ -6052,7 +6049,6 @@ CONFIG_SYS_SSD_BASE
CONFIG_SYS_SSD_BASE_PHYS
CONFIG_SYS_SST_SECT
CONFIG_SYS_SST_SECTSZ
CONFIG_SYS_STACKSIZE
CONFIG_SYS_STACK_LENGTH
CONFIG_SYS_STACK_SIZE
CONFIG_SYS_STATUS_C
@ -6562,7 +6558,6 @@ CONFIG_USB_XHCI_PCI
CONFIG_USER_LOWLEVEL_INIT
CONFIG_USE_FDT
CONFIG_USE_INTERRUPT
CONFIG_USE_IRQ
CONFIG_USE_NAND
CONFIG_USE_NETDEV
CONFIG_USE_NOR

Write Preview
Loading…
Cancel
Save