U-Boot does not have arch/arm/kernel, include/uapi directories, This commit copies files as follows: Location in Linux -> Location in U-Boot arch/arm/kernel/debug.S -> arch/arm/lib/debug.S arch/arm/include/debug/8250.S -> arch/arm/include/debug/8250.S include/uapi/linux/serial_reg.h -> include/linux/serial_reg.h Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>master
parent
5b3ee386fd
commit
1cfe9fa012
@ -0,0 +1,54 @@ |
|||||||
|
/* |
||||||
|
* arch/arm/include/debug/8250.S |
||||||
|
* |
||||||
|
* Copyright (C) 1994-2013 Russell King |
||||||
|
* |
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License version 2 as |
||||||
|
* published by the Free Software Foundation. |
||||||
|
*/ |
||||||
|
#include <linux/serial_reg.h> |
||||||
|
|
||||||
|
.macro addruart, rp, rv, tmp |
||||||
|
ldr \rp, =CONFIG_DEBUG_UART_PHYS |
||||||
|
ldr \rv, =CONFIG_DEBUG_UART_VIRT |
||||||
|
.endm |
||||||
|
|
||||||
|
#ifdef CONFIG_DEBUG_UART_8250_WORD |
||||||
|
.macro store, rd, rx:vararg |
||||||
|
str \rd, \rx |
||||||
|
.endm |
||||||
|
|
||||||
|
.macro load, rd, rx:vararg |
||||||
|
ldr \rd, \rx |
||||||
|
.endm |
||||||
|
#else |
||||||
|
.macro store, rd, rx:vararg |
||||||
|
strb \rd, \rx |
||||||
|
.endm |
||||||
|
|
||||||
|
.macro load, rd, rx:vararg |
||||||
|
ldrb \rd, \rx |
||||||
|
.endm |
||||||
|
#endif |
||||||
|
|
||||||
|
#define UART_SHIFT CONFIG_DEBUG_UART_8250_SHIFT |
||||||
|
|
||||||
|
.macro senduart,rd,rx |
||||||
|
store \rd, [\rx, #UART_TX << UART_SHIFT] |
||||||
|
.endm |
||||||
|
|
||||||
|
.macro busyuart,rd,rx |
||||||
|
1002: load \rd, [\rx, #UART_LSR << UART_SHIFT] |
||||||
|
and \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE |
||||||
|
teq \rd, #UART_LSR_TEMT | UART_LSR_THRE |
||||||
|
bne 1002b |
||||||
|
.endm |
||||||
|
|
||||||
|
.macro waituart,rd,rx |
||||||
|
#ifdef CONFIG_DEBUG_UART_8250_FLOW_CONTROL |
||||||
|
1001: load \rd, [\rx, #UART_MSR << UART_SHIFT] |
||||||
|
tst \rd, #UART_MSR_CTS |
||||||
|
beq 1001b |
||||||
|
#endif |
||||||
|
.endm |
@ -0,0 +1,138 @@ |
|||||||
|
/* |
||||||
|
* linux/arch/arm/kernel/debug.S |
||||||
|
* |
||||||
|
* Copyright (C) 1994-1999 Russell King |
||||||
|
* |
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License version 2 as |
||||||
|
* published by the Free Software Foundation. |
||||||
|
* |
||||||
|
* 32-bit debugging code |
||||||
|
*/ |
||||||
|
#include <linux/linkage.h> |
||||||
|
#include <asm/assembler.h> |
||||||
|
|
||||||
|
.text |
||||||
|
|
||||||
|
/* |
||||||
|
* Some debugging routines (useful if you've got MM problems and |
||||||
|
* printk isn't working). For DEBUGGING ONLY!!! Do not leave |
||||||
|
* references to these in a production kernel! |
||||||
|
*/ |
||||||
|
|
||||||
|
#if !defined(CONFIG_DEBUG_SEMIHOSTING) |
||||||
|
#include CONFIG_DEBUG_LL_INCLUDE |
||||||
|
#endif |
||||||
|
|
||||||
|
#ifdef CONFIG_MMU |
||||||
|
.macro addruart_current, rx, tmp1, tmp2 |
||||||
|
addruart \tmp1, \tmp2, \rx |
||||||
|
mrc p15, 0, \rx, c1, c0 |
||||||
|
tst \rx, #1 |
||||||
|
moveq \rx, \tmp1 |
||||||
|
movne \rx, \tmp2 |
||||||
|
.endm |
||||||
|
|
||||||
|
#else /* !CONFIG_MMU */ |
||||||
|
.macro addruart_current, rx, tmp1, tmp2 |
||||||
|
addruart \rx, \tmp1 |
||||||
|
.endm |
||||||
|
|
||||||
|
#endif /* CONFIG_MMU */ |
||||||
|
|
||||||
|
/* |
||||||
|
* Useful debugging routines |
||||||
|
*/ |
||||||
|
ENTRY(printhex8) |
||||||
|
mov r1, #8 |
||||||
|
b printhex |
||||||
|
ENDPROC(printhex8) |
||||||
|
|
||||||
|
ENTRY(printhex4) |
||||||
|
mov r1, #4 |
||||||
|
b printhex |
||||||
|
ENDPROC(printhex4) |
||||||
|
|
||||||
|
ENTRY(printhex2) |
||||||
|
mov r1, #2 |
||||||
|
printhex: adr r2, hexbuf |
||||||
|
add r3, r2, r1 |
||||||
|
mov r1, #0 |
||||||
|
strb r1, [r3] |
||||||
|
1: and r1, r0, #15 |
||||||
|
mov r0, r0, lsr #4 |
||||||
|
cmp r1, #10 |
||||||
|
addlt r1, r1, #'0' |
||||||
|
addge r1, r1, #'a' - 10 |
||||||
|
strb r1, [r3, #-1]! |
||||||
|
teq r3, r2 |
||||||
|
bne 1b |
||||||
|
mov r0, r2 |
||||||
|
b printascii |
||||||
|
ENDPROC(printhex2) |
||||||
|
|
||||||
|
hexbuf: .space 16 |
||||||
|
|
||||||
|
.ltorg |
||||||
|
|
||||||
|
#ifndef CONFIG_DEBUG_SEMIHOSTING |
||||||
|
|
||||||
|
ENTRY(printascii) |
||||||
|
addruart_current r3, r1, r2 |
||||||
|
b 2f |
||||||
|
1: waituart r2, r3 |
||||||
|
senduart r1, r3 |
||||||
|
busyuart r2, r3 |
||||||
|
teq r1, #'\n' |
||||||
|
moveq r1, #'\r' |
||||||
|
beq 1b |
||||||
|
2: teq r0, #0 |
||||||
|
ldrneb r1, [r0], #1 |
||||||
|
teqne r1, #0 |
||||||
|
bne 1b |
||||||
|
mov pc, lr |
||||||
|
ENDPROC(printascii) |
||||||
|
|
||||||
|
ENTRY(printch) |
||||||
|
addruart_current r3, r1, r2 |
||||||
|
mov r1, r0 |
||||||
|
mov r0, #0 |
||||||
|
b 1b |
||||||
|
ENDPROC(printch) |
||||||
|
|
||||||
|
#ifdef CONFIG_MMU |
||||||
|
ENTRY(debug_ll_addr) |
||||||
|
addruart r2, r3, ip |
||||||
|
str r2, [r0] |
||||||
|
str r3, [r1] |
||||||
|
mov pc, lr |
||||||
|
ENDPROC(debug_ll_addr) |
||||||
|
#endif |
||||||
|
|
||||||
|
#else |
||||||
|
|
||||||
|
ENTRY(printascii) |
||||||
|
mov r1, r0 |
||||||
|
mov r0, #0x04 @ SYS_WRITE0
|
||||||
|
ARM( svc #0x123456 ) |
||||||
|
THUMB( svc #0xab ) |
||||||
|
mov pc, lr |
||||||
|
ENDPROC(printascii) |
||||||
|
|
||||||
|
ENTRY(printch) |
||||||
|
adr r1, hexbuf |
||||||
|
strb r0, [r1] |
||||||
|
mov r0, #0x03 @ SYS_WRITEC
|
||||||
|
ARM( svc #0x123456 ) |
||||||
|
THUMB( svc #0xab ) |
||||||
|
mov pc, lr |
||||||
|
ENDPROC(printch) |
||||||
|
|
||||||
|
ENTRY(debug_ll_addr) |
||||||
|
mov r2, #0 |
||||||
|
str r2, [r0] |
||||||
|
str r2, [r1] |
||||||
|
mov pc, lr |
||||||
|
ENDPROC(debug_ll_addr) |
||||||
|
|
||||||
|
#endif |
@ -0,0 +1,389 @@ |
|||||||
|
/*
|
||||||
|
* include/linux/serial_reg.h |
||||||
|
* |
||||||
|
* Copyright (C) 1992, 1994 by Theodore Ts'o. |
||||||
|
*
|
||||||
|
* Redistribution of this file is permitted under the terms of the GNU
|
||||||
|
* Public License (GPL) |
||||||
|
*
|
||||||
|
* These are the UART port assignments, expressed as offsets from the base |
||||||
|
* register. These assignments should hold for any serial port based on |
||||||
|
* a 8250, 16450, or 16550(A). |
||||||
|
*/ |
||||||
|
|
||||||
|
#ifndef _LINUX_SERIAL_REG_H |
||||||
|
#define _LINUX_SERIAL_REG_H |
||||||
|
|
||||||
|
/*
|
||||||
|
* DLAB=0 |
||||||
|
*/ |
||||||
|
#define UART_RX 0 /* In: Receive buffer */ |
||||||
|
#define UART_TX 0 /* Out: Transmit buffer */ |
||||||
|
|
||||||
|
#define UART_IER 1 /* Out: Interrupt Enable Register */ |
||||||
|
#define UART_IER_MSI 0x08 /* Enable Modem status interrupt */ |
||||||
|
#define UART_IER_RLSI 0x04 /* Enable receiver line status interrupt */ |
||||||
|
#define UART_IER_THRI 0x02 /* Enable Transmitter holding register int. */ |
||||||
|
#define UART_IER_RDI 0x01 /* Enable receiver data interrupt */ |
||||||
|
/*
|
||||||
|
* Sleep mode for ST16650 and TI16750. For the ST16650, EFR[4]=1 |
||||||
|
*/ |
||||||
|
#define UART_IERX_SLEEP 0x10 /* Enable sleep mode */ |
||||||
|
|
||||||
|
#define UART_IIR 2 /* In: Interrupt ID Register */ |
||||||
|
#define UART_IIR_NO_INT 0x01 /* No interrupts pending */ |
||||||
|
#define UART_IIR_ID 0x0e /* Mask for the interrupt ID */ |
||||||
|
#define UART_IIR_MSI 0x00 /* Modem status interrupt */ |
||||||
|
#define UART_IIR_THRI 0x02 /* Transmitter holding register empty */ |
||||||
|
#define UART_IIR_RDI 0x04 /* Receiver data interrupt */ |
||||||
|
#define UART_IIR_RLSI 0x06 /* Receiver line status interrupt */ |
||||||
|
|
||||||
|
#define UART_IIR_BUSY 0x07 /* DesignWare APB Busy Detect */ |
||||||
|
|
||||||
|
#define UART_IIR_RX_TIMEOUT 0x0c /* OMAP RX Timeout interrupt */ |
||||||
|
#define UART_IIR_XOFF 0x10 /* OMAP XOFF/Special Character */ |
||||||
|
#define UART_IIR_CTS_RTS_DSR 0x20 /* OMAP CTS/RTS/DSR Change */ |
||||||
|
|
||||||
|
#define UART_FCR 2 /* Out: FIFO Control Register */ |
||||||
|
#define UART_FCR_ENABLE_FIFO 0x01 /* Enable the FIFO */ |
||||||
|
#define UART_FCR_CLEAR_RCVR 0x02 /* Clear the RCVR FIFO */ |
||||||
|
#define UART_FCR_CLEAR_XMIT 0x04 /* Clear the XMIT FIFO */ |
||||||
|
#define UART_FCR_DMA_SELECT 0x08 /* For DMA applications */ |
||||||
|
/*
|
||||||
|
* Note: The FIFO trigger levels are chip specific: |
||||||
|
* RX:76 = 00 01 10 11 TX:54 = 00 01 10 11 |
||||||
|
* PC16550D: 1 4 8 14 xx xx xx xx |
||||||
|
* TI16C550A: 1 4 8 14 xx xx xx xx |
||||||
|
* TI16C550C: 1 4 8 14 xx xx xx xx |
||||||
|
* ST16C550: 1 4 8 14 xx xx xx xx |
||||||
|
* ST16C650: 8 16 24 28 16 8 24 30 PORT_16650V2 |
||||||
|
* NS16C552: 1 4 8 14 xx xx xx xx |
||||||
|
* ST16C654: 8 16 56 60 8 16 32 56 PORT_16654 |
||||||
|
* TI16C750: 1 16 32 56 xx xx xx xx PORT_16750 |
||||||
|
* TI16C752: 8 16 56 60 8 16 32 56 |
||||||
|
* Tegra: 1 4 8 14 16 8 4 1 PORT_TEGRA |
||||||
|
*/ |
||||||
|
#define UART_FCR_R_TRIG_00 0x00 |
||||||
|
#define UART_FCR_R_TRIG_01 0x40 |
||||||
|
#define UART_FCR_R_TRIG_10 0x80 |
||||||
|
#define UART_FCR_R_TRIG_11 0xc0 |
||||||
|
#define UART_FCR_T_TRIG_00 0x00 |
||||||
|
#define UART_FCR_T_TRIG_01 0x10 |
||||||
|
#define UART_FCR_T_TRIG_10 0x20 |
||||||
|
#define UART_FCR_T_TRIG_11 0x30 |
||||||
|
|
||||||
|
#define UART_FCR_TRIGGER_MASK 0xC0 /* Mask for the FIFO trigger range */ |
||||||
|
#define UART_FCR_TRIGGER_1 0x00 /* Mask for trigger set at 1 */ |
||||||
|
#define UART_FCR_TRIGGER_4 0x40 /* Mask for trigger set at 4 */ |
||||||
|
#define UART_FCR_TRIGGER_8 0x80 /* Mask for trigger set at 8 */ |
||||||
|
#define UART_FCR_TRIGGER_14 0xC0 /* Mask for trigger set at 14 */ |
||||||
|
/* 16650 definitions */ |
||||||
|
#define UART_FCR6_R_TRIGGER_8 0x00 /* Mask for receive trigger set at 1 */ |
||||||
|
#define UART_FCR6_R_TRIGGER_16 0x40 /* Mask for receive trigger set at 4 */ |
||||||
|
#define UART_FCR6_R_TRIGGER_24 0x80 /* Mask for receive trigger set at 8 */ |
||||||
|
#define UART_FCR6_R_TRIGGER_28 0xC0 /* Mask for receive trigger set at 14 */ |
||||||
|
#define UART_FCR6_T_TRIGGER_16 0x00 /* Mask for transmit trigger set at 16 */ |
||||||
|
#define UART_FCR6_T_TRIGGER_8 0x10 /* Mask for transmit trigger set at 8 */ |
||||||
|
#define UART_FCR6_T_TRIGGER_24 0x20 /* Mask for transmit trigger set at 24 */ |
||||||
|
#define UART_FCR6_T_TRIGGER_30 0x30 /* Mask for transmit trigger set at 30 */ |
||||||
|
#define UART_FCR7_64BYTE 0x20 /* Go into 64 byte mode (TI16C750) */ |
||||||
|
|
||||||
|
#define UART_LCR 3 /* Out: Line Control Register */ |
||||||
|
/*
|
||||||
|
* Note: if the word length is 5 bits (UART_LCR_WLEN5), then setting
|
||||||
|
* UART_LCR_STOP will select 1.5 stop bits, not 2 stop bits. |
||||||
|
*/ |
||||||
|
#define UART_LCR_DLAB 0x80 /* Divisor latch access bit */ |
||||||
|
#define UART_LCR_SBC 0x40 /* Set break control */ |
||||||
|
#define UART_LCR_SPAR 0x20 /* Stick parity (?) */ |
||||||
|
#define UART_LCR_EPAR 0x10 /* Even parity select */ |
||||||
|
#define UART_LCR_PARITY 0x08 /* Parity Enable */ |
||||||
|
#define UART_LCR_STOP 0x04 /* Stop bits: 0=1 bit, 1=2 bits */ |
||||||
|
#define UART_LCR_WLEN5 0x00 /* Wordlength: 5 bits */ |
||||||
|
#define UART_LCR_WLEN6 0x01 /* Wordlength: 6 bits */ |
||||||
|
#define UART_LCR_WLEN7 0x02 /* Wordlength: 7 bits */ |
||||||
|
#define UART_LCR_WLEN8 0x03 /* Wordlength: 8 bits */ |
||||||
|
|
||||||
|
/*
|
||||||
|
* Access to some registers depends on register access / configuration |
||||||
|
* mode. |
||||||
|
*/ |
||||||
|
#define UART_LCR_CONF_MODE_A UART_LCR_DLAB /* Configutation mode A */ |
||||||
|
#define UART_LCR_CONF_MODE_B 0xBF /* Configutation mode B */ |
||||||
|
|
||||||
|
#define UART_MCR 4 /* Out: Modem Control Register */ |
||||||
|
#define UART_MCR_CLKSEL 0x80 /* Divide clock by 4 (TI16C752, EFR[4]=1) */ |
||||||
|
#define UART_MCR_TCRTLR 0x40 /* Access TCR/TLR (TI16C752, EFR[4]=1) */ |
||||||
|
#define UART_MCR_XONANY 0x20 /* Enable Xon Any (TI16C752, EFR[4]=1) */ |
||||||
|
#define UART_MCR_AFE 0x20 /* Enable auto-RTS/CTS (TI16C550C/TI16C750) */ |
||||||
|
#define UART_MCR_LOOP 0x10 /* Enable loopback test mode */ |
||||||
|
#define UART_MCR_OUT2 0x08 /* Out2 complement */ |
||||||
|
#define UART_MCR_OUT1 0x04 /* Out1 complement */ |
||||||
|
#define UART_MCR_RTS 0x02 /* RTS complement */ |
||||||
|
#define UART_MCR_DTR 0x01 /* DTR complement */ |
||||||
|
|
||||||
|
#define UART_LSR 5 /* In: Line Status Register */ |
||||||
|
#define UART_LSR_FIFOE 0x80 /* Fifo error */ |
||||||
|
#define UART_LSR_TEMT 0x40 /* Transmitter empty */ |
||||||
|
#define UART_LSR_THRE 0x20 /* Transmit-hold-register empty */ |
||||||
|
#define UART_LSR_BI 0x10 /* Break interrupt indicator */ |
||||||
|
#define UART_LSR_FE 0x08 /* Frame error indicator */ |
||||||
|
#define UART_LSR_PE 0x04 /* Parity error indicator */ |
||||||
|
#define UART_LSR_OE 0x02 /* Overrun error indicator */ |
||||||
|
#define UART_LSR_DR 0x01 /* Receiver data ready */ |
||||||
|
#define UART_LSR_BRK_ERROR_BITS 0x1E /* BI, FE, PE, OE bits */ |
||||||
|
|
||||||
|
#define UART_MSR 6 /* In: Modem Status Register */ |
||||||
|
#define UART_MSR_DCD 0x80 /* Data Carrier Detect */ |
||||||
|
#define UART_MSR_RI 0x40 /* Ring Indicator */ |
||||||
|
#define UART_MSR_DSR 0x20 /* Data Set Ready */ |
||||||
|
#define UART_MSR_CTS 0x10 /* Clear to Send */ |
||||||
|
#define UART_MSR_DDCD 0x08 /* Delta DCD */ |
||||||
|
#define UART_MSR_TERI 0x04 /* Trailing edge ring indicator */ |
||||||
|
#define UART_MSR_DDSR 0x02 /* Delta DSR */ |
||||||
|
#define UART_MSR_DCTS 0x01 /* Delta CTS */ |
||||||
|
#define UART_MSR_ANY_DELTA 0x0F /* Any of the delta bits! */ |
||||||
|
|
||||||
|
#define UART_SCR 7 /* I/O: Scratch Register */ |
||||||
|
|
||||||
|
/*
|
||||||
|
* DLAB=1 |
||||||
|
*/ |
||||||
|
#define UART_DLL 0 /* Out: Divisor Latch Low */ |
||||||
|
#define UART_DLM 1 /* Out: Divisor Latch High */ |
||||||
|
|
||||||
|
/*
|
||||||
|
* LCR=0xBF (or DLAB=1 for 16C660) |
||||||
|
*/ |
||||||
|
#define UART_EFR 2 /* I/O: Extended Features Register */ |
||||||
|
#define UART_XR_EFR 9 /* I/O: Extended Features Register (XR17D15x) */ |
||||||
|
#define UART_EFR_CTS 0x80 /* CTS flow control */ |
||||||
|
#define UART_EFR_RTS 0x40 /* RTS flow control */ |
||||||
|
#define UART_EFR_SCD 0x20 /* Special character detect */ |
||||||
|
#define UART_EFR_ECB 0x10 /* Enhanced control bit */ |
||||||
|
/*
|
||||||
|
* the low four bits control software flow control |
||||||
|
*/ |
||||||
|
|
||||||
|
/*
|
||||||
|
* LCR=0xBF, TI16C752, ST16650, ST16650A, ST16654 |
||||||
|
*/ |
||||||
|
#define UART_XON1 4 /* I/O: Xon character 1 */ |
||||||
|
#define UART_XON2 5 /* I/O: Xon character 2 */ |
||||||
|
#define UART_XOFF1 6 /* I/O: Xoff character 1 */ |
||||||
|
#define UART_XOFF2 7 /* I/O: Xoff character 2 */ |
||||||
|
|
||||||
|
/*
|
||||||
|
* EFR[4]=1 MCR[6]=1, TI16C752 |
||||||
|
*/ |
||||||
|
#define UART_TI752_TCR 6 /* I/O: transmission control register */ |
||||||
|
#define UART_TI752_TLR 7 /* I/O: trigger level register */ |
||||||
|
|
||||||
|
/*
|
||||||
|
* LCR=0xBF, XR16C85x |
||||||
|
*/ |
||||||
|
#define UART_TRG 0 /* FCTR bit 7 selects Rx or Tx |
||||||
|
* In: Fifo count |
||||||
|
* Out: Fifo custom trigger levels */ |
||||||
|
/*
|
||||||
|
* These are the definitions for the Programmable Trigger Register |
||||||
|
*/ |
||||||
|
#define UART_TRG_1 0x01 |
||||||
|
#define UART_TRG_4 0x04 |
||||||
|
#define UART_TRG_8 0x08 |
||||||
|
#define UART_TRG_16 0x10 |
||||||
|
#define UART_TRG_32 0x20 |
||||||
|
#define UART_TRG_64 0x40 |
||||||
|
#define UART_TRG_96 0x60 |
||||||
|
#define UART_TRG_120 0x78 |
||||||
|
#define UART_TRG_128 0x80 |
||||||
|
|
||||||
|
#define UART_FCTR 1 /* Feature Control Register */ |
||||||
|
#define UART_FCTR_RTS_NODELAY 0x00 /* RTS flow control delay */ |
||||||
|
#define UART_FCTR_RTS_4DELAY 0x01 |
||||||
|
#define UART_FCTR_RTS_6DELAY 0x02 |
||||||
|
#define UART_FCTR_RTS_8DELAY 0x03 |
||||||
|
#define UART_FCTR_IRDA 0x04 /* IrDa data encode select */ |
||||||
|
#define UART_FCTR_TX_INT 0x08 /* Tx interrupt type select */ |
||||||
|
#define UART_FCTR_TRGA 0x00 /* Tx/Rx 550 trigger table select */ |
||||||
|
#define UART_FCTR_TRGB 0x10 /* Tx/Rx 650 trigger table select */ |
||||||
|
#define UART_FCTR_TRGC 0x20 /* Tx/Rx 654 trigger table select */ |
||||||
|
#define UART_FCTR_TRGD 0x30 /* Tx/Rx 850 programmable trigger select */ |
||||||
|
#define UART_FCTR_SCR_SWAP 0x40 /* Scratch pad register swap */ |
||||||
|
#define UART_FCTR_RX 0x00 /* Programmable trigger mode select */ |
||||||
|
#define UART_FCTR_TX 0x80 /* Programmable trigger mode select */ |
||||||
|
|
||||||
|
/*
|
||||||
|
* LCR=0xBF, FCTR[6]=1 |
||||||
|
*/ |
||||||
|
#define UART_EMSR 7 /* Extended Mode Select Register */ |
||||||
|
#define UART_EMSR_FIFO_COUNT 0x01 /* Rx/Tx select */ |
||||||
|
#define UART_EMSR_ALT_COUNT 0x02 /* Alternating count select */ |
||||||
|
|
||||||
|
/*
|
||||||
|
* The Intel XScale on-chip UARTs define these bits |
||||||
|
*/ |
||||||
|
#define UART_IER_DMAE 0x80 /* DMA Requests Enable */ |
||||||
|
#define UART_IER_UUE 0x40 /* UART Unit Enable */ |
||||||
|
#define UART_IER_NRZE 0x20 /* NRZ coding Enable */ |
||||||
|
#define UART_IER_RTOIE 0x10 /* Receiver Time Out Interrupt Enable */ |
||||||
|
|
||||||
|
#define UART_IIR_TOD 0x08 /* Character Timeout Indication Detected */ |
||||||
|
|
||||||
|
#define UART_FCR_PXAR1 0x00 /* receive FIFO threshold = 1 */ |
||||||
|
#define UART_FCR_PXAR8 0x40 /* receive FIFO threshold = 8 */ |
||||||
|
#define UART_FCR_PXAR16 0x80 /* receive FIFO threshold = 16 */ |
||||||
|
#define UART_FCR_PXAR32 0xc0 /* receive FIFO threshold = 32 */ |
||||||
|
|
||||||
|
/*
|
||||||
|
* Intel MID on-chip HSU (High Speed UART) defined bits |
||||||
|
*/ |
||||||
|
#define UART_FCR_HSU_64_1B 0x00 /* receive FIFO treshold = 1 */ |
||||||
|
#define UART_FCR_HSU_64_16B 0x40 /* receive FIFO treshold = 16 */ |
||||||
|
#define UART_FCR_HSU_64_32B 0x80 /* receive FIFO treshold = 32 */ |
||||||
|
#define UART_FCR_HSU_64_56B 0xc0 /* receive FIFO treshold = 56 */ |
||||||
|
|
||||||
|
#define UART_FCR_HSU_16_1B 0x00 /* receive FIFO treshold = 1 */ |
||||||
|
#define UART_FCR_HSU_16_4B 0x40 /* receive FIFO treshold = 4 */ |
||||||
|
#define UART_FCR_HSU_16_8B 0x80 /* receive FIFO treshold = 8 */ |
||||||
|
#define UART_FCR_HSU_16_14B 0xc0 /* receive FIFO treshold = 14 */ |
||||||
|
|
||||||
|
#define UART_FCR_HSU_64B_FIFO 0x20 /* chose 64 bytes FIFO */ |
||||||
|
#define UART_FCR_HSU_16B_FIFO 0x00 /* chose 16 bytes FIFO */ |
||||||
|
|
||||||
|
#define UART_FCR_HALF_EMPT_TXI 0x00 /* trigger TX_EMPT IRQ for half empty */ |
||||||
|
#define UART_FCR_FULL_EMPT_TXI 0x08 /* trigger TX_EMPT IRQ for full empty */ |
||||||
|
|
||||||
|
/*
|
||||||
|
* These register definitions are for the 16C950 |
||||||
|
*/ |
||||||
|
#define UART_ASR 0x01 /* Additional Status Register */ |
||||||
|
#define UART_RFL 0x03 /* Receiver FIFO level */ |
||||||
|
#define UART_TFL 0x04 /* Transmitter FIFO level */ |
||||||
|
#define UART_ICR 0x05 /* Index Control Register */ |
||||||
|
|
||||||
|
/* The 16950 ICR registers */ |
||||||
|
#define UART_ACR 0x00 /* Additional Control Register */ |
||||||
|
#define UART_CPR 0x01 /* Clock Prescalar Register */ |
||||||
|
#define UART_TCR 0x02 /* Times Clock Register */ |
||||||
|
#define UART_CKS 0x03 /* Clock Select Register */ |
||||||
|
#define UART_TTL 0x04 /* Transmitter Interrupt Trigger Level */ |
||||||
|
#define UART_RTL 0x05 /* Receiver Interrupt Trigger Level */ |
||||||
|
#define UART_FCL 0x06 /* Flow Control Level Lower */ |
||||||
|
#define UART_FCH 0x07 /* Flow Control Level Higher */ |
||||||
|
#define UART_ID1 0x08 /* ID #1 */ |
||||||
|
#define UART_ID2 0x09 /* ID #2 */ |
||||||
|
#define UART_ID3 0x0A /* ID #3 */ |
||||||
|
#define UART_REV 0x0B /* Revision */ |
||||||
|
#define UART_CSR 0x0C /* Channel Software Reset */ |
||||||
|
#define UART_NMR 0x0D /* Nine-bit Mode Register */ |
||||||
|
#define UART_CTR 0xFF |
||||||
|
|
||||||
|
/*
|
||||||
|
* The 16C950 Additional Control Register |
||||||
|
*/ |
||||||
|
#define UART_ACR_RXDIS 0x01 /* Receiver disable */ |
||||||
|
#define UART_ACR_TXDIS 0x02 /* Transmitter disable */ |
||||||
|
#define UART_ACR_DSRFC 0x04 /* DSR Flow Control */ |
||||||
|
#define UART_ACR_TLENB 0x20 /* 950 trigger levels enable */ |
||||||
|
#define UART_ACR_ICRRD 0x40 /* ICR Read enable */ |
||||||
|
#define UART_ACR_ASREN 0x80 /* Additional status enable */ |
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
/*
|
||||||
|
* These definitions are for the RSA-DV II/S card, from |
||||||
|
* |
||||||
|
* Kiyokazu SUTO <suto@ks-and-ks.ne.jp> |
||||||
|
*/ |
||||||
|
|
||||||
|
#define UART_RSA_BASE (-8) |
||||||
|
|
||||||
|
#define UART_RSA_MSR ((UART_RSA_BASE) + 0) /* I/O: Mode Select Register */ |
||||||
|
|
||||||
|
#define UART_RSA_MSR_SWAP (1 << 0) /* Swap low/high 8 bytes in I/O port addr */ |
||||||
|
#define UART_RSA_MSR_FIFO (1 << 2) /* Enable the external FIFO */ |
||||||
|
#define UART_RSA_MSR_FLOW (1 << 3) /* Enable the auto RTS/CTS flow control */ |
||||||
|
#define UART_RSA_MSR_ITYP (1 << 4) /* Level (1) / Edge triger (0) */ |
||||||
|
|
||||||
|
#define UART_RSA_IER ((UART_RSA_BASE) + 1) /* I/O: Interrupt Enable Register */ |
||||||
|
|
||||||
|
#define UART_RSA_IER_Rx_FIFO_H (1 << 0) /* Enable Rx FIFO half full int. */ |
||||||
|
#define UART_RSA_IER_Tx_FIFO_H (1 << 1) /* Enable Tx FIFO half full int. */ |
||||||
|
#define UART_RSA_IER_Tx_FIFO_E (1 << 2) /* Enable Tx FIFO empty int. */ |
||||||
|
#define UART_RSA_IER_Rx_TOUT (1 << 3) /* Enable char receive timeout int */ |
||||||
|
#define UART_RSA_IER_TIMER (1 << 4) /* Enable timer interrupt */ |
||||||
|
|
||||||
|
#define UART_RSA_SRR ((UART_RSA_BASE) + 2) /* IN: Status Read Register */ |
||||||
|
|
||||||
|
#define UART_RSA_SRR_Tx_FIFO_NEMP (1 << 0) /* Tx FIFO is not empty (1) */ |
||||||
|
#define UART_RSA_SRR_Tx_FIFO_NHFL (1 << 1) /* Tx FIFO is not half full (1) */ |
||||||
|
#define UART_RSA_SRR_Tx_FIFO_NFUL (1 << 2) /* Tx FIFO is not full (1) */ |
||||||
|
#define UART_RSA_SRR_Rx_FIFO_NEMP (1 << 3) /* Rx FIFO is not empty (1) */ |
||||||
|
#define UART_RSA_SRR_Rx_FIFO_NHFL (1 << 4) /* Rx FIFO is not half full (1) */ |
||||||
|
#define UART_RSA_SRR_Rx_FIFO_NFUL (1 << 5) /* Rx FIFO is not full (1) */ |
||||||
|
#define UART_RSA_SRR_Rx_TOUT (1 << 6) /* Character reception timeout occurred (1) */ |
||||||
|
#define UART_RSA_SRR_TIMER (1 << 7) /* Timer interrupt occurred */ |
||||||
|
|
||||||
|
#define UART_RSA_FRR ((UART_RSA_BASE) + 2) /* OUT: FIFO Reset Register */ |
||||||
|
|
||||||
|
#define UART_RSA_TIVSR ((UART_RSA_BASE) + 3) /* I/O: Timer Interval Value Set Register */ |
||||||
|
|
||||||
|
#define UART_RSA_TCR ((UART_RSA_BASE) + 4) /* OUT: Timer Control Register */ |
||||||
|
|
||||||
|
#define UART_RSA_TCR_SWITCH (1 << 0) /* Timer on */ |
||||||
|
|
||||||
|
/*
|
||||||
|
* The RSA DSV/II board has two fixed clock frequencies. One is the |
||||||
|
* standard rate, and the other is 8 times faster. |
||||||
|
*/ |
||||||
|
#define SERIAL_RSA_BAUD_BASE (921600) |
||||||
|
#define SERIAL_RSA_BAUD_BASE_LO (SERIAL_RSA_BAUD_BASE / 8) |
||||||
|
|
||||||
|
/*
|
||||||
|
* Extra serial register definitions for the internal UARTs |
||||||
|
* in TI OMAP processors. |
||||||
|
*/ |
||||||
|
#define UART_OMAP_MDR1 0x08 /* Mode definition register */ |
||||||
|
#define UART_OMAP_MDR2 0x09 /* Mode definition register 2 */ |
||||||
|
#define UART_OMAP_SCR 0x10 /* Supplementary control register */ |
||||||
|
#define UART_OMAP_SSR 0x11 /* Supplementary status register */ |
||||||
|
#define UART_OMAP_EBLR 0x12 /* BOF length register */ |
||||||
|
#define UART_OMAP_OSC_12M_SEL 0x13 /* OMAP1510 12MHz osc select */ |
||||||
|
#define UART_OMAP_MVER 0x14 /* Module version register */ |
||||||
|
#define UART_OMAP_SYSC 0x15 /* System configuration register */ |
||||||
|
#define UART_OMAP_SYSS 0x16 /* System status register */ |
||||||
|
#define UART_OMAP_WER 0x17 /* Wake-up enable register */ |
||||||
|
|
||||||
|
/*
|
||||||
|
* These are the definitions for the MDR1 register |
||||||
|
*/ |
||||||
|
#define UART_OMAP_MDR1_16X_MODE 0x00 /* UART 16x mode */ |
||||||
|
#define UART_OMAP_MDR1_SIR_MODE 0x01 /* SIR mode */ |
||||||
|
#define UART_OMAP_MDR1_16X_ABAUD_MODE 0x02 /* UART 16x auto-baud */ |
||||||
|
#define UART_OMAP_MDR1_13X_MODE 0x03 /* UART 13x mode */ |
||||||
|
#define UART_OMAP_MDR1_MIR_MODE 0x04 /* MIR mode */ |
||||||
|
#define UART_OMAP_MDR1_FIR_MODE 0x05 /* FIR mode */ |
||||||
|
#define UART_OMAP_MDR1_CIR_MODE 0x06 /* CIR mode */ |
||||||
|
#define UART_OMAP_MDR1_DISABLE 0x07 /* Disable (default state) */ |
||||||
|
|
||||||
|
/*
|
||||||
|
* These are definitions for the Exar XR17V35X and XR17(C|D)15X |
||||||
|
*/ |
||||||
|
#define UART_EXAR_8XMODE 0x88 /* 8X sampling rate select */ |
||||||
|
#define UART_EXAR_SLEEP 0x8b /* Sleep mode */ |
||||||
|
#define UART_EXAR_DVID 0x8d /* Device identification */ |
||||||
|
|
||||||
|
#define UART_EXAR_FCTR 0x08 /* Feature Control Register */ |
||||||
|
#define UART_FCTR_EXAR_IRDA 0x08 /* IrDa data encode select */ |
||||||
|
#define UART_FCTR_EXAR_485 0x10 /* Auto 485 half duplex dir ctl */ |
||||||
|
#define UART_FCTR_EXAR_TRGA 0x00 /* FIFO trigger table A */ |
||||||
|
#define UART_FCTR_EXAR_TRGB 0x60 /* FIFO trigger table B */ |
||||||
|
#define UART_FCTR_EXAR_TRGC 0x80 /* FIFO trigger table C */ |
||||||
|
#define UART_FCTR_EXAR_TRGD 0xc0 /* FIFO trigger table D programmable */ |
||||||
|
|
||||||
|
#define UART_EXAR_TXTRG 0x0a /* Tx FIFO trigger level write-only */ |
||||||
|
#define UART_EXAR_RXTRG 0x0b /* Rx FIFO trigger level write-only */ |
||||||
|
|
||||||
|
#endif /* _LINUX_SERIAL_REG_H */ |
||||||
|
|
Loading…
Reference in new issue