parent
b5e7c84f72
commit
2404124c47
@ -1,12 +0,0 @@ |
|||||||
if TARGET_CMS700 |
|
||||||
|
|
||||||
config SYS_BOARD |
|
||||||
default "cms700" |
|
||||||
|
|
||||||
config SYS_VENDOR |
|
||||||
default "esd" |
|
||||||
|
|
||||||
config SYS_CONFIG_NAME |
|
||||||
default "CMS700" |
|
||||||
|
|
||||||
endif |
|
@ -1,6 +0,0 @@ |
|||||||
CMS700 BOARD |
|
||||||
M: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
|
||||||
S: Maintained |
|
||||||
F: board/esd/cms700/ |
|
||||||
F: include/configs/CMS700.h |
|
||||||
F: configs/CMS700_defconfig |
|
@ -1,16 +0,0 @@ |
|||||||
#
|
|
||||||
# (C) Copyright 2000-2006
|
|
||||||
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
||||||
#
|
|
||||||
# SPDX-License-Identifier: GPL-2.0+
|
|
||||||
#
|
|
||||||
|
|
||||||
# Objects for Xilinx JTAG programming (CPLD)
|
|
||||||
CPLD = ../common/xilinx_jtag/lenval.o \
|
|
||||||
../common/xilinx_jtag/micro.o \
|
|
||||||
../common/xilinx_jtag/ports.o
|
|
||||||
|
|
||||||
obj-y = cms700.o flash.o \
|
|
||||||
../common/misc.o \
|
|
||||||
$(CPLD) \
|
|
||||||
../common/esd405ep_nand.o \
|
|
@ -1,192 +0,0 @@ |
|||||||
/*
|
|
||||||
* (C) Copyright 2005-2007 |
|
||||||
* Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd-electronics.com |
|
||||||
* |
|
||||||
* SPDX-License-Identifier: GPL-2.0+ |
|
||||||
*/ |
|
||||||
|
|
||||||
#include <common.h> |
|
||||||
#include <asm/processor.h> |
|
||||||
#include <asm/io.h> |
|
||||||
#include <command.h> |
|
||||||
#include <malloc.h> |
|
||||||
|
|
||||||
DECLARE_GLOBAL_DATA_PTR; |
|
||||||
|
|
||||||
extern void lxt971_no_sleep(void); |
|
||||||
|
|
||||||
int board_early_init_f (void) |
|
||||||
{ |
|
||||||
/*
|
|
||||||
* IRQ 0-15 405GP internally generated; active high; level sensitive |
|
||||||
* IRQ 16 405GP internally generated; active low; level sensitive |
|
||||||
* IRQ 17-24 RESERVED |
|
||||||
* IRQ 25 (EXT IRQ 0) CAN0; active low; level sensitive |
|
||||||
* IRQ 26 (EXT IRQ 1) SER0 ; active low; level sensitive |
|
||||||
* IRQ 27 (EXT IRQ 2) SER1; active low; level sensitive |
|
||||||
* IRQ 28 (EXT IRQ 3) FPGA 0; active low; level sensitive |
|
||||||
* IRQ 29 (EXT IRQ 4) FPGA 1; active low; level sensitive |
|
||||||
* IRQ 30 (EXT IRQ 5) PCI INTA; active low; level sensitive |
|
||||||
* IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive |
|
||||||
*/ |
|
||||||
mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ |
|
||||||
mtdcr(UIC0ER, 0x00000000); /* disable all ints */ |
|
||||||
mtdcr(UIC0CR, 0x00000000); /* set all to be non-critical*/ |
|
||||||
mtdcr(UIC0PR, 0xFFFFFF80); /* set int polarities */ |
|
||||||
mtdcr(UIC0TR, 0x10000000); /* set int trigger levels */ |
|
||||||
mtdcr(UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority*/ |
|
||||||
mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ |
|
||||||
|
|
||||||
/*
|
|
||||||
* EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us |
|
||||||
*/ |
|
||||||
mtebc (EBC0_CFG, 0xa8400000); /* ebc always driven */ |
|
||||||
|
|
||||||
/*
|
|
||||||
* Reset CPLD via GPIO12 (CS3) pin |
|
||||||
*/ |
|
||||||
out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CONFIG_SYS_PLD_RESET); |
|
||||||
udelay(1000); /* wait 1ms */ |
|
||||||
out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CONFIG_SYS_PLD_RESET); |
|
||||||
udelay(1000); /* wait 1ms */ |
|
||||||
|
|
||||||
return 0; |
|
||||||
} |
|
||||||
|
|
||||||
int misc_init_r (void) |
|
||||||
{ |
|
||||||
/* adjust flash start and offset */ |
|
||||||
gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize; |
|
||||||
gd->bd->bi_flashoffset = 0; |
|
||||||
|
|
||||||
/*
|
|
||||||
* Setup and enable EEPROM write protection |
|
||||||
*/ |
|
||||||
out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CONFIG_SYS_EEPROM_WP); |
|
||||||
|
|
||||||
return (0); |
|
||||||
} |
|
||||||
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Check Board Identity: |
|
||||||
*/ |
|
||||||
#define LED_REG (CONFIG_SYS_PLD_BASE + 0x1000) |
|
||||||
int checkboard (void) |
|
||||||
{ |
|
||||||
char str[64]; |
|
||||||
int flashcnt; |
|
||||||
int delay; |
|
||||||
|
|
||||||
puts ("Board: "); |
|
||||||
|
|
||||||
if (getenv_f("serial#", str, sizeof(str)) == -1) { |
|
||||||
puts ("### No HW ID - assuming CMS700"); |
|
||||||
} else { |
|
||||||
puts(str); |
|
||||||
} |
|
||||||
|
|
||||||
printf(" (PLD-Version=%02d)\n", |
|
||||||
in_8((void *)(CONFIG_SYS_PLD_BASE + 0x1001))); |
|
||||||
|
|
||||||
/*
|
|
||||||
* Flash LEDs |
|
||||||
*/ |
|
||||||
for (flashcnt = 0; flashcnt < 3; flashcnt++) { |
|
||||||
out_8((void *)LED_REG, 0x00); /* LEDs off */ |
|
||||||
for (delay = 0; delay < 100; delay++) |
|
||||||
udelay(1000); |
|
||||||
out_8((void *)LED_REG, 0x0f); /* LEDs on */ |
|
||||||
for (delay = 0; delay < 50; delay++) |
|
||||||
udelay(1000); |
|
||||||
} |
|
||||||
out_8((void *)LED_REG, 0x70); |
|
||||||
|
|
||||||
return 0; |
|
||||||
} |
|
||||||
|
|
||||||
/* ------------------------------------------------------------------------- */ |
|
||||||
|
|
||||||
#if defined(CONFIG_SYS_EEPROM_WREN) |
|
||||||
/* Input: <dev_addr> I2C address of EEPROM device to enable.
|
|
||||||
* <state> -1: deliver current state |
|
||||||
* 0: disable write |
|
||||||
* 1: enable write |
|
||||||
* Returns: -1: wrong device address |
|
||||||
* 0: dis-/en- able done |
|
||||||
* 0/1: current state if <state> was -1. |
|
||||||
*/ |
|
||||||
int eeprom_write_enable (unsigned dev_addr, int state) |
|
||||||
{ |
|
||||||
if (CONFIG_SYS_I2C_EEPROM_ADDR != dev_addr) { |
|
||||||
return -1; |
|
||||||
} else { |
|
||||||
switch (state) { |
|
||||||
case 1: |
|
||||||
/* Enable write access, clear bit GPIO_SINT2. */ |
|
||||||
out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CONFIG_SYS_EEPROM_WP); |
|
||||||
state = 0; |
|
||||||
break; |
|
||||||
case 0: |
|
||||||
/* Disable write access, set bit GPIO_SINT2. */ |
|
||||||
out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CONFIG_SYS_EEPROM_WP); |
|
||||||
state = 0; |
|
||||||
break; |
|
||||||
default: |
|
||||||
/* Read current status back. */ |
|
||||||
state = (0 == (in_be32((void *)GPIO0_OR) & CONFIG_SYS_EEPROM_WP)); |
|
||||||
break; |
|
||||||
} |
|
||||||
} |
|
||||||
return state; |
|
||||||
} |
|
||||||
|
|
||||||
int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) |
|
||||||
{ |
|
||||||
int query = argc == 1; |
|
||||||
int state = 0; |
|
||||||
|
|
||||||
if (query) { |
|
||||||
/* Query write access state. */ |
|
||||||
state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, -1); |
|
||||||
if (state < 0) { |
|
||||||
puts ("Query of write access state failed.\n"); |
|
||||||
} else { |
|
||||||
printf ("Write access for device 0x%0x is %sabled.\n", |
|
||||||
CONFIG_SYS_I2C_EEPROM_ADDR, state ? "en" : "dis"); |
|
||||||
state = 0; |
|
||||||
} |
|
||||||
} else { |
|
||||||
if ('0' == argv[1][0]) { |
|
||||||
/* Disable write access. */ |
|
||||||
state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, 0); |
|
||||||
} else { |
|
||||||
/* Enable write access. */ |
|
||||||
state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, 1); |
|
||||||
} |
|
||||||
if (state < 0) { |
|
||||||
puts ("Setup of write access state failed.\n"); |
|
||||||
} |
|
||||||
} |
|
||||||
|
|
||||||
return state; |
|
||||||
} |
|
||||||
|
|
||||||
U_BOOT_CMD(eepwren, 2, 0, do_eep_wren, |
|
||||||
"Enable / disable / query EEPROM write access", |
|
||||||
"" |
|
||||||
); |
|
||||||
#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */ |
|
||||||
|
|
||||||
/* ------------------------------------------------------------------------- */ |
|
||||||
|
|
||||||
void reset_phy(void) |
|
||||||
{ |
|
||||||
#ifdef CONFIG_LXT971_NO_SLEEP |
|
||||||
|
|
||||||
/*
|
|
||||||
* Disable sleep mode in LXT971 |
|
||||||
*/ |
|
||||||
lxt971_no_sleep(); |
|
||||||
#endif |
|
||||||
} |
|
@ -1,85 +0,0 @@ |
|||||||
/*
|
|
||||||
* (C) Copyright 2001 |
|
||||||
* Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com |
|
||||||
* |
|
||||||
* SPDX-License-Identifier: GPL-2.0+ |
|
||||||
*/ |
|
||||||
|
|
||||||
#include <common.h> |
|
||||||
#include <asm/ppc4xx.h> |
|
||||||
#include <asm/processor.h> |
|
||||||
|
|
||||||
/*
|
|
||||||
* include common flash code (for esd boards) |
|
||||||
*/ |
|
||||||
#include "../common/flash.c" |
|
||||||
|
|
||||||
/*-----------------------------------------------------------------------
|
|
||||||
* Functions |
|
||||||
*/ |
|
||||||
static ulong flash_get_size (vu_long * addr, flash_info_t * info); |
|
||||||
static void flash_get_offsets (ulong base, flash_info_t * info); |
|
||||||
|
|
||||||
/*-----------------------------------------------------------------------
|
|
||||||
*/ |
|
||||||
|
|
||||||
unsigned long flash_init (void) |
|
||||||
{ |
|
||||||
unsigned long size_b0; |
|
||||||
int i; |
|
||||||
uint pbcr; |
|
||||||
unsigned long base_b0; |
|
||||||
int size_val = 0; |
|
||||||
|
|
||||||
/* Init: no FLASHes known */ |
|
||||||
for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) { |
|
||||||
flash_info[i].flash_id = FLASH_UNKNOWN; |
|
||||||
} |
|
||||||
|
|
||||||
/* Static FLASH Bank configuration here - FIXME XXX */ |
|
||||||
|
|
||||||
size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]); |
|
||||||
|
|
||||||
if (flash_info[0].flash_id == FLASH_UNKNOWN) { |
|
||||||
printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n", |
|
||||||
size_b0, size_b0<<20); |
|
||||||
} |
|
||||||
|
|
||||||
/* Setup offsets */ |
|
||||||
flash_get_offsets (-size_b0, &flash_info[0]); |
|
||||||
|
|
||||||
/* Re-do sizing to get full correct info */ |
|
||||||
mtdcr(EBC0_CFGADDR, PB0CR); |
|
||||||
pbcr = mfdcr(EBC0_CFGDATA); |
|
||||||
mtdcr(EBC0_CFGADDR, PB0CR); |
|
||||||
base_b0 = -size_b0; |
|
||||||
switch (size_b0) { |
|
||||||
case 1 << 20: |
|
||||||
size_val = 0; |
|
||||||
break; |
|
||||||
case 2 << 20: |
|
||||||
size_val = 1; |
|
||||||
break; |
|
||||||
case 4 << 20: |
|
||||||
size_val = 2; |
|
||||||
break; |
|
||||||
case 8 << 20: |
|
||||||
size_val = 3; |
|
||||||
break; |
|
||||||
case 16 << 20: |
|
||||||
size_val = 4; |
|
||||||
break; |
|
||||||
} |
|
||||||
pbcr = (pbcr & 0x0001ffff) | base_b0 | (size_val << 17); |
|
||||||
mtdcr(EBC0_CFGDATA, pbcr); |
|
||||||
|
|
||||||
/* Monitor protection ON by default */ |
|
||||||
(void)flash_protect(FLAG_PROTECT_SET, |
|
||||||
-CONFIG_SYS_MONITOR_LEN, |
|
||||||
0xffffffff, |
|
||||||
&flash_info[0]); |
|
||||||
|
|
||||||
flash_info[0].size = size_b0; |
|
||||||
|
|
||||||
return (size_b0); |
|
||||||
} |
|
@ -1,3 +0,0 @@ |
|||||||
CONFIG_PPC=y |
|
||||||
CONFIG_4xx=y |
|
||||||
CONFIG_TARGET_CMS700=y |
|
@ -1,308 +0,0 @@ |
|||||||
/*
|
|
||||||
* (C) Copyright 2005 |
|
||||||
* Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd-electronics.com |
|
||||||
* |
|
||||||
* SPDX-License-Identifier: GPL-2.0+ |
|
||||||
*/ |
|
||||||
|
|
||||||
/*
|
|
||||||
* CMS700.h - configuration options, board specific |
|
||||||
*/ |
|
||||||
|
|
||||||
#ifndef __CONFIG_H |
|
||||||
#define __CONFIG_H |
|
||||||
|
|
||||||
/*
|
|
||||||
* High Level Configuration Options |
|
||||||
* (easy to change) |
|
||||||
*/ |
|
||||||
|
|
||||||
#define CONFIG_405EP 1 /* This is a PPC405 CPU */ |
|
||||||
#define CONFIG_VOM405 1 /* ...on a VOM405 board */ |
|
||||||
|
|
||||||
#define CONFIG_SYS_TEXT_BASE 0xFFFC8000 |
|
||||||
|
|
||||||
#define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */ |
|
||||||
#define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */ |
|
||||||
|
|
||||||
#define CONFIG_SYS_CLK_FREQ 33330000 /* external frequency to pll */ |
|
||||||
|
|
||||||
#define CONFIG_BAUDRATE 9600 |
|
||||||
#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */ |
|
||||||
|
|
||||||
#undef CONFIG_BOOTARGS |
|
||||||
#undef CONFIG_BOOTCOMMAND |
|
||||||
|
|
||||||
#define CONFIG_PREBOOT /* enable preboot variable */ |
|
||||||
|
|
||||||
#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ |
|
||||||
|
|
||||||
#define CONFIG_PPC4xx_EMAC |
|
||||||
#undef CONFIG_HAS_ETH1 |
|
||||||
|
|
||||||
#define CONFIG_MII 1 /* MII PHY management */ |
|
||||||
#define CONFIG_PHY_ADDR 0 /* PHY address */ |
|
||||||
#define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */ |
|
||||||
#define CONFIG_RESET_PHY_R 1 /* use reset_phy() to disable phy sleep mode */ |
|
||||||
|
|
||||||
/*
|
|
||||||
* BOOTP options |
|
||||||
*/ |
|
||||||
#define CONFIG_BOOTP_SUBNETMASK |
|
||||||
#define CONFIG_BOOTP_GATEWAY |
|
||||||
#define CONFIG_BOOTP_HOSTNAME |
|
||||||
#define CONFIG_BOOTP_BOOTPATH |
|
||||||
#define CONFIG_BOOTP_DNS |
|
||||||
#define CONFIG_BOOTP_DNS2 |
|
||||||
#define CONFIG_BOOTP_SEND_HOSTNAME |
|
||||||
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Command line configuration. |
|
||||||
*/ |
|
||||||
#include <config_cmd_default.h> |
|
||||||
|
|
||||||
#define CONFIG_CMD_DHCP |
|
||||||
#define CONFIG_CMD_BSP |
|
||||||
#define CONFIG_CMD_ELF |
|
||||||
#define CONFIG_CMD_NAND |
|
||||||
#define CONFIG_CMD_I2C |
|
||||||
#define CONFIG_CMD_DATE |
|
||||||
#define CONFIG_CMD_MII |
|
||||||
#define CONFIG_CMD_PING |
|
||||||
#define CONFIG_CMD_EEPROM |
|
||||||
|
|
||||||
|
|
||||||
#undef CONFIG_WATCHDOG /* watchdog disabled */ |
|
||||||
|
|
||||||
#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */ |
|
||||||
|
|
||||||
#undef CONFIG_PRAM /* no "protected RAM" */ |
|
||||||
|
|
||||||
/*
|
|
||||||
* Miscellaneous configurable options |
|
||||||
*/ |
|
||||||
#define CONFIG_SYS_LONGHELP /* undef to save memory */ |
|
||||||
|
|
||||||
#undef CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ |
|
||||||
|
|
||||||
#if defined(CONFIG_CMD_KGDB) |
|
||||||
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ |
|
||||||
#else |
|
||||||
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ |
|
||||||
#endif |
|
||||||
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ |
|
||||||
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ |
|
||||||
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ |
|
||||||
|
|
||||||
#define CONFIG_SYS_DEVICE_NULLDEV 1 /* include nulldev device */ |
|
||||||
|
|
||||||
#define CONFIG_SYS_CONSOLE_INFO_QUIET 1 /* don't print console @ startup*/ |
|
||||||
|
|
||||||
#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ |
|
||||||
#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ |
|
||||||
|
|
||||||
#define CONFIG_CONS_INDEX 2 /* Use UART1 */ |
|
||||||
#define CONFIG_SYS_NS16550 |
|
||||||
#define CONFIG_SYS_NS16550_SERIAL |
|
||||||
#define CONFIG_SYS_NS16550_REG_SIZE 1 |
|
||||||
#define CONFIG_SYS_NS16550_CLK get_serial_clock() |
|
||||||
|
|
||||||
#undef CONFIG_SYS_EXT_SERIAL_CLOCK /* no external serial clock used */ |
|
||||||
#define CONFIG_SYS_BASE_BAUD 691200 |
|
||||||
|
|
||||||
/* The following table includes the supported baudrates */ |
|
||||||
#define CONFIG_SYS_BAUDRATE_TABLE \ |
|
||||||
{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, \
|
|
||||||
57600, 115200, 230400, 460800, 921600 } |
|
||||||
|
|
||||||
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ |
|
||||||
#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */ |
|
||||||
|
|
||||||
#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ |
|
||||||
|
|
||||||
#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ |
|
||||||
|
|
||||||
#define CONFIG_SYS_RX_ETH_BUFFER 16 /* use 16 rx buffer on 405 emac */ |
|
||||||
|
|
||||||
/*-----------------------------------------------------------------------
|
|
||||||
* RTC stuff |
|
||||||
*----------------------------------------------------------------------- |
|
||||||
*/ |
|
||||||
#define CONFIG_RTC_DS1337 |
|
||||||
#define CONFIG_SYS_I2C_RTC_ADDR 0x68 |
|
||||||
|
|
||||||
/*-----------------------------------------------------------------------
|
|
||||||
* NAND-FLASH stuff |
|
||||||
*----------------------------------------------------------------------- |
|
||||||
*/ |
|
||||||
#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } |
|
||||||
#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ |
|
||||||
#define NAND_BIG_DELAY_US 25 |
|
||||||
|
|
||||||
#define CONFIG_SYS_NAND_CE (0x80000000 >> 1) /* our CE is GPIO1 */ |
|
||||||
#define CONFIG_SYS_NAND_RDY (0x80000000 >> 4) /* our RDY is GPIO4 */ |
|
||||||
#define CONFIG_SYS_NAND_CLE (0x80000000 >> 2) /* our CLE is GPIO2 */ |
|
||||||
#define CONFIG_SYS_NAND_ALE (0x80000000 >> 3) /* our ALE is GPIO3 */ |
|
||||||
|
|
||||||
#define CONFIG_SYS_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ |
|
||||||
#define CONFIG_SYS_NAND_QUIET 1 |
|
||||||
|
|
||||||
#define CONFIG_SYS_NAND_MAX_OOBFREE 2 |
|
||||||
#define CONFIG_SYS_NAND_MAX_ECCPOS 48 |
|
||||||
|
|
||||||
/*
|
|
||||||
* For booting Linux, the board info and command line data |
|
||||||
* have to be in the first 8 MB of memory, since this is |
|
||||||
* the maximum mapped by the Linux kernel during initialization. |
|
||||||
*/ |
|
||||||
#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ |
|
||||||
/*-----------------------------------------------------------------------
|
|
||||||
* FLASH organization |
|
||||||
*/ |
|
||||||
#define FLASH_BASE0_PRELIM 0xFFC00000 /* FLASH bank #0 */ |
|
||||||
|
|
||||||
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ |
|
||||||
#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max number of sectors on one chip */ |
|
||||||
|
|
||||||
#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ |
|
||||||
#define CONFIG_SYS_FLASH_WRITE_TOUT 1000 /* Timeout for Flash Write (in ms) */ |
|
||||||
|
|
||||||
#define CONFIG_SYS_FLASH_WORD_SIZE unsigned short /* flash word size (width) */ |
|
||||||
#define CONFIG_SYS_FLASH_ADDR0 0x5555 /* 1st address for flash config cycles */ |
|
||||||
#define CONFIG_SYS_FLASH_ADDR1 0x2AAA /* 2nd address for flash config cycles */ |
|
||||||
/*
|
|
||||||
* The following defines are added for buggy IOP480 byte interface. |
|
||||||
* All other boards should use the standard values (CPCI405 etc.) |
|
||||||
*/ |
|
||||||
#define CONFIG_SYS_FLASH_READ0 0x0000 /* 0 is standard */ |
|
||||||
#define CONFIG_SYS_FLASH_READ1 0x0001 /* 1 is standard */ |
|
||||||
#define CONFIG_SYS_FLASH_READ2 0x0002 /* 2 is standard */ |
|
||||||
|
|
||||||
#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ |
|
||||||
|
|
||||||
/*-----------------------------------------------------------------------
|
|
||||||
* Start addresses for the final memory configuration |
|
||||||
* (Set up by the startup code) |
|
||||||
* Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 |
|
||||||
*/ |
|
||||||
#define CONFIG_SYS_SDRAM_BASE 0x00000000 |
|
||||||
#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_MONITOR_BASE |
|
||||||
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE |
|
||||||
#define CONFIG_SYS_MONITOR_LEN (~(CONFIG_SYS_TEXT_BASE) + 1) |
|
||||||
#define CONFIG_SYS_MALLOC_LEN (256 * 1024) |
|
||||||
|
|
||||||
#if (CONFIG_SYS_MONITOR_BASE < FLASH_BASE0_PRELIM) |
|
||||||
# define CONFIG_SYS_RAMBOOT 1 |
|
||||||
#else |
|
||||||
# undef CONFIG_SYS_RAMBOOT |
|
||||||
#endif |
|
||||||
|
|
||||||
/*-----------------------------------------------------------------------
|
|
||||||
* Environment Variable setup |
|
||||||
*/ |
|
||||||
#define CONFIG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */ |
|
||||||
#define CONFIG_ENV_OFFSET 0x100 /* environment starts at the beginning of the EEPROM */ |
|
||||||
#define CONFIG_ENV_SIZE 0x700 /* 2048 bytes may be used for env vars*/ |
|
||||||
/* total size of a CAT24WC16 is 2048 bytes */ |
|
||||||
|
|
||||||
/*-----------------------------------------------------------------------
|
|
||||||
* I2C EEPROM (CAT24WC16) for environment |
|
||||||
*/ |
|
||||||
#define CONFIG_SYS_I2C |
|
||||||
#define CONFIG_SYS_I2C_PPC4XX |
|
||||||
#define CONFIG_SYS_I2C_PPC4XX_CH0 |
|
||||||
#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 100000 |
|
||||||
#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F |
|
||||||
|
|
||||||
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT28WC08 */ |
|
||||||
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ |
|
||||||
/* mask of address bits that overflow into the "EEPROM chip address" */ |
|
||||||
#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 0x07 |
|
||||||
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 /* The Catalyst CAT24WC08 has */ |
|
||||||
/* 16 byte page write mode using*/ |
|
||||||
/* last 4 bits of the address */ |
|
||||||
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */ |
|
||||||
|
|
||||||
#define CONFIG_SYS_EEPROM_WREN 1 |
|
||||||
|
|
||||||
/*-----------------------------------------------------------------------
|
|
||||||
* External Bus Controller (EBC) Setup |
|
||||||
*/ |
|
||||||
#define CONFIG_SYS_PLD_BASE 0xf0000000 |
|
||||||
#define CONFIG_SYS_NAND_BASE 0xF4000000 /* NAND FLASH Base Address */ |
|
||||||
|
|
||||||
/* Memory Bank 0 (Flash Bank 0, NOR-FLASH) initialization */ |
|
||||||
#define CONFIG_SYS_EBC_PB0AP 0x92015480 |
|
||||||
#define CONFIG_SYS_EBC_PB0CR 0xFFC5A000 /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */ |
|
||||||
|
|
||||||
/* Memory Bank 1 (Flash Bank 1, NAND-FLASH) initialization */ |
|
||||||
#define CONFIG_SYS_EBC_PB1AP 0x92015480 |
|
||||||
#define CONFIG_SYS_EBC_PB1CR 0xF4018000 /* BAS=0xF40,BS=1MB,BU=R/W,BW=8bit */ |
|
||||||
|
|
||||||
/* Memory Bank 2 (8 Bit Peripheral: CAN, UART, RTC) initialization */ |
|
||||||
#define CONFIG_SYS_EBC_PB2AP 0x010053C0 /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */ |
|
||||||
#define CONFIG_SYS_EBC_PB2CR 0xF0018000 /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit */ |
|
||||||
|
|
||||||
/*-----------------------------------------------------------------------
|
|
||||||
* FPGA stuff |
|
||||||
*/ |
|
||||||
#define CONFIG_SYS_XSVF_DEFAULT_ADDR 0xfffc0000 |
|
||||||
|
|
||||||
/* FPGA program pin configuration */ |
|
||||||
#define CONFIG_SYS_FPGA_PRG 0x04000000 /* JTAG TMS pin (ppc output) */ |
|
||||||
#define CONFIG_SYS_FPGA_CLK 0x02000000 /* JTAG TCK pin (ppc output) */ |
|
||||||
#define CONFIG_SYS_FPGA_DATA 0x01000000 /* JTAG TDO->TDI data pin (ppc output) */ |
|
||||||
#define CONFIG_SYS_FPGA_INIT 0x00010000 /* unused (ppc input) */ |
|
||||||
#define CONFIG_SYS_FPGA_DONE 0x00008000 /* JTAG TDI->TDO pin (ppc input) */ |
|
||||||
|
|
||||||
/*-----------------------------------------------------------------------
|
|
||||||
* Definitions for initial stack pointer and data area (in data cache) |
|
||||||
*/ |
|
||||||
/* use on chip memory ( OCM ) for temperary stack until sdram is tested */ |
|
||||||
#define CONFIG_SYS_TEMP_STACK_OCM 1 |
|
||||||
|
|
||||||
/* On Chip Memory location */ |
|
||||||
#define CONFIG_SYS_OCM_DATA_ADDR 0xF8000000 |
|
||||||
#define CONFIG_SYS_OCM_DATA_SIZE 0x1000 |
|
||||||
#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM */ |
|
||||||
#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM */ |
|
||||||
|
|
||||||
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) |
|
||||||
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET |
|
||||||
|
|
||||||
/*-----------------------------------------------------------------------
|
|
||||||
* Definitions for GPIO setup (PPC405EP specific) |
|
||||||
* |
|
||||||
* GPIO0[0] - External Bus Controller BLAST output |
|
||||||
* GPIO0[1-9] - Instruction trace outputs -> GPIO |
|
||||||
* GPIO0[10-13] - External Bus Controller CS_1 - CS_4 outputs |
|
||||||
* GPIO0[14-16] - External Bus Controller ABUS3-ABUS5 outputs -> GPIO |
|
||||||
* GPIO0[17-23] - External Interrupts IRQ0 - IRQ6 inputs |
|
||||||
* GPIO0[24-27] - UART0 control signal inputs/outputs |
|
||||||
* GPIO0[28-29] - UART1 data signal input/output |
|
||||||
* GPIO0[30-31] - EMAC0 and EMAC1 reject packet inputs |
|
||||||
*/ |
|
||||||
/* GPIO Input: OSR=00, ISR=00, TSR=00, TCR=0 */ |
|
||||||
/* GPIO Output: OSR=00, ISR=00, TSR=00, TCR=1 */ |
|
||||||
/* Alt. Funtion Input: OSR=00, ISR=01, TSR=00, TCR=0 */ |
|
||||||
/* Alt. Funtion Output: OSR=01, ISR=00, TSR=00, TCR=1 */ |
|
||||||
#define CONFIG_SYS_GPIO0_OSRL 0x40000500 /* 0 ... 15 */ |
|
||||||
#define CONFIG_SYS_GPIO0_OSRH 0x00000110 /* 16 ... 31 */ |
|
||||||
#define CONFIG_SYS_GPIO0_ISR1L 0x00000000 /* 0 ... 15 */ |
|
||||||
#define CONFIG_SYS_GPIO0_ISR1H 0x14000045 /* 16 ... 31 */ |
|
||||||
#define CONFIG_SYS_GPIO0_TSRL 0x00000000 /* 0 ... 15 */ |
|
||||||
#define CONFIG_SYS_GPIO0_TSRH 0x00000000 /* 16 ... 31 */ |
|
||||||
#define CONFIG_SYS_GPIO0_TCR 0xF7FE0014 /* 0 ... 31 */ |
|
||||||
|
|
||||||
#define CONFIG_SYS_EEPROM_WP (0x80000000 >> 8) /* GPIO8 */ |
|
||||||
#define CONFIG_SYS_PLD_RESET (0x80000000 >> 12) /* GPIO12 */ |
|
||||||
|
|
||||||
/*
|
|
||||||
* Default speed selection (cpu_plb_opb_ebc) in mhz. |
|
||||||
* This value will be set if iic boot eprom is disabled. |
|
||||||
*/ |
|
||||||
#define PLLMR0_DEFAULT PLLMR0_133_66_66_33 |
|
||||||
#define PLLMR1_DEFAULT PLLMR1_133_66_66_33 |
|
||||||
|
|
||||||
#endif /* __CONFIG_H */ |
|
Loading…
Reference in new issue