evb-3288 board RK3288-based development board with 2 USB ports, HDMI, VGA, micro-SD card, audio, WiFi and Gigabit Ethernet. It also includes on-board 8G eMMC and 2GB of SDRAM. Expansion connector provide access to display pins, I2C, SPI, UART and GPIOs. This add some basic files required to allow the board to output serial messaged and can run command(mmc info etc). evb-rk3288 also supports booting from eMMC or SD card, the default is eMMC. Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org>master
parent
b47ea79219
commit
744368d6ae
@ -0,0 +1,59 @@ |
|||||||
|
/* |
||||||
|
* (C) Copyright 2016 Rockchip Electronics Co., Ltd |
||||||
|
* |
||||||
|
* SPDX-License-Identifier: GPL-2.0+ X11 |
||||||
|
*/ |
||||||
|
|
||||||
|
/dts-v1/; |
||||||
|
#include "rk3288-evb.dtsi" |
||||||
|
|
||||||
|
/ { |
||||||
|
model = "Evb-RK3288"; |
||||||
|
compatible = "evb-rk3288,evb-rk3288", "rockchip,rk3288"; |
||||||
|
|
||||||
|
chosen { |
||||||
|
stdout-path = &uart2; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
&dmc { |
||||||
|
rockchip,num-channels = <2>; |
||||||
|
rockchip,pctl-timing = <0x215 0xc8 0x0 0x35 0x26 0x2 0x70 0x2000d |
||||||
|
0x6 0x0 0x8 0x4 0x17 0x24 0xd 0x6 |
||||||
|
0x4 0x8 0x4 0x76 0x4 0x0 0x30 0x0 |
||||||
|
0x1 0x2 0x2 0x4 0x0 0x0 0xc0 0x4 |
||||||
|
0x8 0x1f4>; |
||||||
|
rockchip,phy-timing = <0x48d7dd93 0x187008d8 0x121076 |
||||||
|
0x0 0xc3 0x6 0x2>; |
||||||
|
rockchip,sdram-channel = /bits/ 8 <0x2 0xa 0x3 0x2 0x2 0x0 0xe 0xe>; |
||||||
|
rockchip,sdram-params = <0x20d266a4 0x5b6 2 533000000 6 9 0>; |
||||||
|
}; |
||||||
|
|
||||||
|
&pinctrl { |
||||||
|
u-boot,dm-pre-reloc; |
||||||
|
}; |
||||||
|
|
||||||
|
&pwm1 { |
||||||
|
status = "okay"; |
||||||
|
}; |
||||||
|
|
||||||
|
&uart2 { |
||||||
|
u-boot,dm-pre-reloc; |
||||||
|
reg-shift = <2>; |
||||||
|
}; |
||||||
|
|
||||||
|
&sdmmc { |
||||||
|
u-boot,dm-pre-reloc; |
||||||
|
}; |
||||||
|
|
||||||
|
&emmc { |
||||||
|
u-boot,dm-pre-reloc; |
||||||
|
}; |
||||||
|
|
||||||
|
&gpio3 { |
||||||
|
u-boot,dm-pre-reloc; |
||||||
|
}; |
||||||
|
|
||||||
|
&gpio8 { |
||||||
|
u-boot,dm-pre-reloc; |
||||||
|
}; |
@ -0,0 +1,379 @@ |
|||||||
|
/* |
||||||
|
* (C) Copyright 2016 Rockchip Electronics Co., Ltd |
||||||
|
* |
||||||
|
* SPDX-License-Identifier: GPL-2.0+ X11 |
||||||
|
*/ |
||||||
|
|
||||||
|
#include "rk3288.dtsi" |
||||||
|
|
||||||
|
/ { |
||||||
|
memory { |
||||||
|
reg = <0 0x80000000>; |
||||||
|
}; |
||||||
|
|
||||||
|
keys: gpio-keys { |
||||||
|
compatible = "gpio-keys"; |
||||||
|
#address-cells = <1>; |
||||||
|
#size-cells = <0>; |
||||||
|
|
||||||
|
button@0 { |
||||||
|
gpio-key,wakeup = <1>; |
||||||
|
gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; |
||||||
|
label = "GPIO Power"; |
||||||
|
linux,code = <116>; |
||||||
|
pinctrl-names = "default"; |
||||||
|
pinctrl-0 = <&pwr_key>; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
vcc_sys: vsys-regulator { |
||||||
|
compatible = "regulator-fixed"; |
||||||
|
regulator-name = "vcc_sys"; |
||||||
|
regulator-min-microvolt = <5000000>; |
||||||
|
regulator-max-microvolt = <5000000>; |
||||||
|
regulator-always-on; |
||||||
|
regulator-boot-on; |
||||||
|
}; |
||||||
|
|
||||||
|
vcc_flash: flash-regulator { |
||||||
|
compatible = "regulator-fixed"; |
||||||
|
regulator-name = "vcc_flash"; |
||||||
|
regulator-min-microvolt = <1800000>; |
||||||
|
regulator-max-microvolt = <1800000>; |
||||||
|
vin-supply = <&vcc_io>; |
||||||
|
}; |
||||||
|
|
||||||
|
vcc_5v: usb-regulator { |
||||||
|
compatible = "regulator-fixed"; |
||||||
|
regulator-name = "vcc_5v"; |
||||||
|
regulator-min-microvolt = <5000000>; |
||||||
|
regulator-max-microvolt = <5000000>; |
||||||
|
regulator-always-on; |
||||||
|
regulator-boot-on; |
||||||
|
vin-supply = <&vcc_sys>; |
||||||
|
}; |
||||||
|
|
||||||
|
vcc_host_5v: usb-host-regulator { |
||||||
|
compatible = "regulator-fixed"; |
||||||
|
enable-active-high; |
||||||
|
gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>; |
||||||
|
pinctrl-names = "default"; |
||||||
|
pinctrl-0 = <&host_vbus_drv>; |
||||||
|
regulator-name = "vcc_host_5v"; |
||||||
|
regulator-min-microvolt = <5000000>; |
||||||
|
regulator-max-microvolt = <5000000>; |
||||||
|
regulator-always-on; |
||||||
|
vin-supply = <&vcc_5v>; |
||||||
|
}; |
||||||
|
|
||||||
|
vcc_otg_5v: usb-otg-regulator { |
||||||
|
compatible = "regulator-fixed"; |
||||||
|
enable-active-high; |
||||||
|
gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>; |
||||||
|
pinctrl-names = "default"; |
||||||
|
pinctrl-0 = <&otg_vbus_drv>; |
||||||
|
regulator-name = "vcc_otg_5v"; |
||||||
|
regulator-min-microvolt = <5000000>; |
||||||
|
regulator-max-microvolt = <5000000>; |
||||||
|
regulator-always-on; |
||||||
|
vin-supply = <&vcc_5v>; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
&cpu0 { |
||||||
|
cpu0-supply = <&vdd_cpu>; |
||||||
|
}; |
||||||
|
|
||||||
|
&emmc { |
||||||
|
broken-cd; |
||||||
|
bus-width = <8>; |
||||||
|
cap-mmc-highspeed; |
||||||
|
disable-wp; |
||||||
|
non-removable; |
||||||
|
num-slots = <1>; |
||||||
|
pinctrl-names = "default"; |
||||||
|
pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_pwr>, <&emmc_bus8>; |
||||||
|
vmmc-supply = <&vcc_io>; |
||||||
|
vqmmc-supply = <&vcc_flash>; |
||||||
|
status = "okay"; |
||||||
|
}; |
||||||
|
|
||||||
|
&hdmi { |
||||||
|
ddc-i2c-bus = <&i2c5>; |
||||||
|
status = "okay"; |
||||||
|
}; |
||||||
|
|
||||||
|
&i2c0 { |
||||||
|
clock-frequency = <400000>; |
||||||
|
status = "okay"; |
||||||
|
|
||||||
|
vdd_cpu: syr827@40 { |
||||||
|
compatible = "silergy,syr827"; |
||||||
|
fcs,suspend-voltage-selector = <1>; |
||||||
|
reg = <0x40>; |
||||||
|
regulator-name = "vdd_cpu"; |
||||||
|
regulator-min-microvolt = <850000>; |
||||||
|
regulator-max-microvolt = <1350000>; |
||||||
|
regulator-always-on; |
||||||
|
regulator-boot-on; |
||||||
|
vin-supply = <&vcc_sys>; |
||||||
|
}; |
||||||
|
|
||||||
|
vdd_gpu: syr828@41 { |
||||||
|
compatible = "silergy,syr828"; |
||||||
|
fcs,suspend-voltage-selector = <1>; |
||||||
|
reg = <0x41>; |
||||||
|
regulator-name = "vdd_gpu"; |
||||||
|
regulator-min-microvolt = <850000>; |
||||||
|
regulator-max-microvolt = <1350000>; |
||||||
|
regulator-always-on; |
||||||
|
vin-supply = <&vcc_sys>; |
||||||
|
}; |
||||||
|
|
||||||
|
hym8563: hym8563@51 { |
||||||
|
compatible = "haoyu,hym8563"; |
||||||
|
reg = <0x51>; |
||||||
|
#clock-cells = <0>; |
||||||
|
clock-frequency = <32768>; |
||||||
|
clock-output-names = "xin32k"; |
||||||
|
interrupt-parent = <&gpio7>; |
||||||
|
interrupts = <4 IRQ_TYPE_EDGE_FALLING>; |
||||||
|
pinctrl-names = "default"; |
||||||
|
pinctrl-0 = <&rtc_int>; |
||||||
|
}; |
||||||
|
|
||||||
|
act8846: act8846@5a { |
||||||
|
compatible = "active-semi,act8846"; |
||||||
|
reg = <0x5a>; |
||||||
|
pinctrl-names = "default"; |
||||||
|
pinctrl-0 = <&pwr_hold>; |
||||||
|
system-power-controller; |
||||||
|
|
||||||
|
regulators { |
||||||
|
vcc_ddr: REG1 { |
||||||
|
regulator-name = "vcc_ddr"; |
||||||
|
regulator-min-microvolt = <1200000>; |
||||||
|
regulator-max-microvolt = <1200000>; |
||||||
|
regulator-always-on; |
||||||
|
}; |
||||||
|
|
||||||
|
vcc_io: REG2 { |
||||||
|
regulator-name = "vcc_io"; |
||||||
|
regulator-min-microvolt = <3300000>; |
||||||
|
regulator-max-microvolt = <3300000>; |
||||||
|
regulator-always-on; |
||||||
|
}; |
||||||
|
|
||||||
|
vdd_log: REG3 { |
||||||
|
regulator-name = "vdd_log"; |
||||||
|
regulator-min-microvolt = <1100000>; |
||||||
|
regulator-max-microvolt = <1100000>; |
||||||
|
regulator-always-on; |
||||||
|
}; |
||||||
|
|
||||||
|
vcc_20: REG4 { |
||||||
|
regulator-name = "vcc_20"; |
||||||
|
regulator-min-microvolt = <2000000>; |
||||||
|
regulator-max-microvolt = <2000000>; |
||||||
|
regulator-always-on; |
||||||
|
}; |
||||||
|
|
||||||
|
vccio_sd: REG5 { |
||||||
|
regulator-name = "vccio_sd"; |
||||||
|
regulator-min-microvolt = <3300000>; |
||||||
|
regulator-max-microvolt = <3300000>; |
||||||
|
regulator-always-on; |
||||||
|
}; |
||||||
|
|
||||||
|
vdd10_lcd: REG6 { |
||||||
|
regulator-name = "vdd10_lcd"; |
||||||
|
regulator-min-microvolt = <1000000>; |
||||||
|
regulator-max-microvolt = <1000000>; |
||||||
|
regulator-always-on; |
||||||
|
}; |
||||||
|
|
||||||
|
vcca_codec: REG7 { |
||||||
|
regulator-name = "vcca_codec"; |
||||||
|
regulator-min-microvolt = <3300000>; |
||||||
|
regulator-max-microvolt = <3300000>; |
||||||
|
}; |
||||||
|
|
||||||
|
vcc_tp: REG8 { |
||||||
|
regulator-name = "vcca_33"; |
||||||
|
regulator-min-microvolt = <3300000>; |
||||||
|
regulator-max-microvolt = <3300000>; |
||||||
|
}; |
||||||
|
|
||||||
|
vccio_pmu: REG9 { |
||||||
|
regulator-name = "vccio_pmu"; |
||||||
|
regulator-min-microvolt = <3300000>; |
||||||
|
regulator-max-microvolt = <3300000>; |
||||||
|
}; |
||||||
|
|
||||||
|
vdd_10: REG10 { |
||||||
|
regulator-name = "vdd_10"; |
||||||
|
regulator-min-microvolt = <1000000>; |
||||||
|
regulator-max-microvolt = <1000000>; |
||||||
|
regulator-always-on; |
||||||
|
}; |
||||||
|
|
||||||
|
vcc_18: REG11 { |
||||||
|
regulator-name = "vcc_18"; |
||||||
|
regulator-min-microvolt = <1800000>; |
||||||
|
regulator-max-microvolt = <1800000>; |
||||||
|
regulator-always-on; |
||||||
|
}; |
||||||
|
|
||||||
|
vcc18_lcd: REG12 { |
||||||
|
regulator-name = "vcc18_lcd"; |
||||||
|
regulator-min-microvolt = <1800000>; |
||||||
|
regulator-max-microvolt = <1800000>; |
||||||
|
regulator-always-on; |
||||||
|
}; |
||||||
|
}; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
&i2c1 { |
||||||
|
status = "okay"; |
||||||
|
}; |
||||||
|
|
||||||
|
&i2c2 { |
||||||
|
status = "okay"; |
||||||
|
}; |
||||||
|
|
||||||
|
&i2c4 { |
||||||
|
status = "okay"; |
||||||
|
}; |
||||||
|
|
||||||
|
&i2c5 { |
||||||
|
status = "okay"; |
||||||
|
}; |
||||||
|
|
||||||
|
&pinctrl { |
||||||
|
pcfg_output_high: pcfg-output-high { |
||||||
|
output-high; |
||||||
|
}; |
||||||
|
|
||||||
|
pcfg_output_low: pcfg-output-low { |
||||||
|
output-low; |
||||||
|
}; |
||||||
|
|
||||||
|
act8846 { |
||||||
|
pwr_hold: pwr-hold { |
||||||
|
rockchip,pins = <0 9 RK_FUNC_GPIO &pcfg_output_high>; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
hym8563 { |
||||||
|
rtc_int: rtc-int { |
||||||
|
rockchip,pins = <0 4 RK_FUNC_GPIO &pcfg_pull_up>; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
keys { |
||||||
|
pwr_key: pwr-key { |
||||||
|
rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
sdmmc { |
||||||
|
sdmmc_pwr: sdmmc-pwr { |
||||||
|
rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
usb_host { |
||||||
|
host_vbus_drv: host-vbus-drv { |
||||||
|
rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
usb_otg { |
||||||
|
otg_vbus_drv: otg-vbus-drv { |
||||||
|
rockchip,pins = <0 12 RK_FUNC_GPIO &pcfg_pull_none>; |
||||||
|
}; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
&saradc { |
||||||
|
vref-supply = <&vcc_18>; |
||||||
|
status = "okay"; |
||||||
|
}; |
||||||
|
|
||||||
|
&sdio0 { |
||||||
|
broken-cd; |
||||||
|
bus-width = <4>; |
||||||
|
disable-wp; |
||||||
|
non-removable; |
||||||
|
num-slots = <1>; |
||||||
|
pinctrl-names = "default"; |
||||||
|
pinctrl-0 = <&sdio0_bus4>, <&sdio0_cmd>, <&sdio0_clk>; |
||||||
|
vmmc-supply = <&vcc_18>; |
||||||
|
status = "disabled"; |
||||||
|
}; |
||||||
|
|
||||||
|
&sdmmc { |
||||||
|
bus-width = <4>; |
||||||
|
cap-mmc-highspeed; |
||||||
|
cap-sd-highspeed; |
||||||
|
card-detect-delay = <200>; |
||||||
|
disable-wp; |
||||||
|
num-slots = <1>; |
||||||
|
pinctrl-names = "default"; |
||||||
|
pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>; |
||||||
|
vmmc-supply = <&vccio_sd>; |
||||||
|
status = "okay"; |
||||||
|
}; |
||||||
|
|
||||||
|
&spi0 { |
||||||
|
pinctrl-names = "default"; |
||||||
|
pinctrl-0 = <&spi0_clk>, <&spi0_cs0>, <&spi0_tx>, <&spi0_rx>, <&spi0_cs1>; |
||||||
|
status = "okay"; |
||||||
|
}; |
||||||
|
|
||||||
|
&uart0 { |
||||||
|
pinctrl-names = "default"; |
||||||
|
pinctrl-0 = <&uart0_xfer>, <&uart0_cts>, <&uart0_rts>; |
||||||
|
status = "okay"; |
||||||
|
}; |
||||||
|
|
||||||
|
&uart1 { |
||||||
|
status = "okay"; |
||||||
|
}; |
||||||
|
|
||||||
|
&uart2 { |
||||||
|
status = "okay"; |
||||||
|
}; |
||||||
|
|
||||||
|
&uart3 { |
||||||
|
status = "okay"; |
||||||
|
}; |
||||||
|
|
||||||
|
&usb_host1 { |
||||||
|
status = "okay"; |
||||||
|
}; |
||||||
|
|
||||||
|
&usb_otg { |
||||||
|
status = "okay"; |
||||||
|
}; |
||||||
|
|
||||||
|
&vopb { |
||||||
|
status = "okay"; |
||||||
|
}; |
||||||
|
|
||||||
|
&vopb_mmu { |
||||||
|
status = "okay"; |
||||||
|
}; |
||||||
|
|
||||||
|
&vopl { |
||||||
|
status = "okay"; |
||||||
|
}; |
||||||
|
|
||||||
|
&vopl_mmu { |
||||||
|
status = "okay"; |
||||||
|
}; |
||||||
|
|
||||||
|
&wdt { |
||||||
|
status = "okay"; |
||||||
|
}; |
@ -0,0 +1,15 @@ |
|||||||
|
if TARGET_EVB_RK3288 |
||||||
|
|
||||||
|
config SYS_BOARD |
||||||
|
default "evb-rk3288" |
||||||
|
|
||||||
|
config SYS_VENDOR |
||||||
|
default "evb-rk3288" |
||||||
|
|
||||||
|
config SYS_CONFIG_NAME |
||||||
|
default "evb-rk3288" |
||||||
|
|
||||||
|
config BOARD_SPECIFIC_OPTIONS # dummy |
||||||
|
def_bool y |
||||||
|
|
||||||
|
endif |
@ -0,0 +1,6 @@ |
|||||||
|
EVB-RK3288 |
||||||
|
M: Lin Huang <hl@rock-chips.com> |
||||||
|
S: Maintained |
||||||
|
F: board/evb-rk3288/evb-rk3288 |
||||||
|
F: include/configs/evb-rk3288.h |
||||||
|
F: configs/evb-rk3288_defconfig |
@ -0,0 +1,7 @@ |
|||||||
|
#
|
||||||
|
# (C) Copyright 2016 Rockchip Electronics Co., Ltd
|
||||||
|
#
|
||||||
|
# SPDX-License-Identifier: GPL-2.0+
|
||||||
|
#
|
||||||
|
|
||||||
|
obj-y += evb-rk3288.o
|
@ -0,0 +1,15 @@ |
|||||||
|
/*
|
||||||
|
* (C) Copyright 2016 Rockchip Electronics Co., Ltd |
||||||
|
* |
||||||
|
* SPDX-License-Identifier: GPL-2.0+ |
||||||
|
*/ |
||||||
|
|
||||||
|
#include <common.h> |
||||||
|
#include <spl.h> |
||||||
|
|
||||||
|
void board_boot_order(u32 *spl_boot_list) |
||||||
|
{ |
||||||
|
/* eMMC prior to sdcard. */ |
||||||
|
spl_boot_list[0] = BOOT_DEVICE_MMC2; |
||||||
|
spl_boot_list[1] = BOOT_DEVICE_MMC1; |
||||||
|
} |
@ -0,0 +1,67 @@ |
|||||||
|
CONFIG_ARM=y |
||||||
|
CONFIG_ARCH_ROCKCHIP=y |
||||||
|
CONFIG_SYS_MALLOC_F_LEN=0x2000 |
||||||
|
CONFIG_ROCKCHIP_RK3288=y |
||||||
|
CONFIG_TARGET_EVB_RK3288=y |
||||||
|
CONFIG_SPL_STACK_R_ADDR=0x80000 |
||||||
|
CONFIG_DEFAULT_DEVICE_TREE="rk3288-evb" |
||||||
|
CONFIG_SPL_STACK_R=y |
||||||
|
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000 |
||||||
|
CONFIG_HUSH_PARSER=y |
||||||
|
CONFIG_CMD_BOOTZ=y |
||||||
|
# CONFIG_CMD_IMLS is not set |
||||||
|
CONFIG_CMD_MMC=y |
||||||
|
CONFIG_CMD_SF=y |
||||||
|
CONFIG_CMD_SPI=y |
||||||
|
CONFIG_CMD_I2C=y |
||||||
|
CONFIG_CMD_GPIO=y |
||||||
|
# CONFIG_CMD_SETEXPR is not set |
||||||
|
CONFIG_CMD_DHCP=y |
||||||
|
CONFIG_CMD_MII=y |
||||||
|
CONFIG_CMD_PING=y |
||||||
|
CONFIG_CMD_CACHE=y |
||||||
|
CONFIG_CMD_TIME=y |
||||||
|
CONFIG_CMD_PMIC=y |
||||||
|
CONFIG_CMD_REGULATOR=y |
||||||
|
CONFIG_CMD_EXT2=y |
||||||
|
CONFIG_CMD_EXT4=y |
||||||
|
CONFIG_CMD_FAT=y |
||||||
|
CONFIG_CMD_FS_GENERIC=y |
||||||
|
CONFIG_SPL_OF_CONTROL=y |
||||||
|
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" |
||||||
|
CONFIG_REGMAP=y |
||||||
|
CONFIG_SPL_REGMAP=y |
||||||
|
CONFIG_SYSCON=y |
||||||
|
CONFIG_SPL_SYSCON=y |
||||||
|
CONFIG_CLK=y |
||||||
|
CONFIG_SPL_CLK=y |
||||||
|
CONFIG_ROCKCHIP_GPIO=y |
||||||
|
CONFIG_SYS_I2C_ROCKCHIP=y |
||||||
|
CONFIG_LED=y |
||||||
|
CONFIG_LED_GPIO=y |
||||||
|
CONFIG_SYSRESET=y |
||||||
|
CONFIG_DM_MMC=y |
||||||
|
CONFIG_ROCKCHIP_DWMMC=y |
||||||
|
CONFIG_PINCTRL=y |
||||||
|
# CONFIG_PINCTRL_FULL is not set |
||||||
|
CONFIG_SPL_PINCTRL=y |
||||||
|
# CONFIG_SPL_PINCTRL_FULL is not set |
||||||
|
CONFIG_ROCKCHIP_PINCTRL=y |
||||||
|
CONFIG_DM_PMIC=y |
||||||
|
CONFIG_PMIC_ACT8846=y |
||||||
|
CONFIG_DM_REGULATOR=y |
||||||
|
CONFIG_REGULATOR_ACT8846=y |
||||||
|
CONFIG_DM_REGULATOR_FIXED=y |
||||||
|
CONFIG_DM_PWM=y |
||||||
|
CONFIG_PWM_ROCKCHIP=y |
||||||
|
CONFIG_RAM=y |
||||||
|
CONFIG_SPL_RAM=y |
||||||
|
CONFIG_DEBUG_UART=y |
||||||
|
CONFIG_DEBUG_UART_BASE=0xff690000 |
||||||
|
CONFIG_DEBUG_UART_CLOCK=24000000 |
||||||
|
CONFIG_DEBUG_UART_SHIFT=2 |
||||||
|
CONFIG_SYS_NS16550=y |
||||||
|
CONFIG_USE_PRIVATE_LIBGCC=y |
||||||
|
CONFIG_USE_TINY_PRINTF=y |
||||||
|
CONFIG_CMD_DHRYSTONE=y |
||||||
|
CONFIG_ERRNO_STR=y |
@ -0,0 +1,26 @@ |
|||||||
|
/*
|
||||||
|
* (C) Copyright 2016 Rockchip Electronics Co., Ltd |
||||||
|
* |
||||||
|
* SPDX-License-Identifier: GPL-2.0+ |
||||||
|
*/ |
||||||
|
|
||||||
|
#ifndef __CONFIG_H |
||||||
|
#define __CONFIG_H |
||||||
|
|
||||||
|
#define ROCKCHIP_DEVICE_SETTINGS |
||||||
|
#include <configs/rk3288_common.h> |
||||||
|
|
||||||
|
#define CONFIG_SPL_MMC_SUPPORT |
||||||
|
|
||||||
|
#define CONFIG_ENV_IS_IN_MMC |
||||||
|
#define CONFIG_SYS_MMC_ENV_DEV 1 |
||||||
|
/* SPL @ 32k for ~36k
|
||||||
|
* ENV @ 96k |
||||||
|
* u-boot @ 128K |
||||||
|
*/ |
||||||
|
#define CONFIG_ENV_OFFSET (96 * 1024) |
||||||
|
|
||||||
|
#define CONFIG_SYS_WHITE_ON_BLACK |
||||||
|
#define CONFIG_CONSOLE_SCROLL_LINES 10 |
||||||
|
|
||||||
|
#endif |
Loading…
Reference in new issue