This adds platform code for the Khadas VIM2 board based on a Meson GXM (S912) SoC with the Meson GXM configuration. This initial submission supports UART, MMC/SDCard and Ethernet. USB is partially supported. All the code is from Neil Armstrong! I just rebased the code, do some cleanup and tested on my board. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Loic Devulder <ldevulder@suse.de> Acked-by: Neil Armstrong <narmstrong@baylibre.com>lime2-spi
parent
2058b7395e
commit
8afd4ea5b9
@ -0,0 +1,12 @@ |
|||||||
|
if TARGET_KHADAS_VIM2 |
||||||
|
|
||||||
|
config SYS_BOARD |
||||||
|
default "khadas-vim2" |
||||||
|
|
||||||
|
config SYS_VENDOR |
||||||
|
default "amlogic" |
||||||
|
|
||||||
|
config SYS_CONFIG_NAME |
||||||
|
default "khadas-vim2" |
||||||
|
|
||||||
|
endif |
@ -0,0 +1,6 @@ |
|||||||
|
KHADAS-VIM2 |
||||||
|
M: Neil Armstrong <narmstrong@baylibre.com> |
||||||
|
S: Maintained |
||||||
|
F: board/amlogic/khadas-vim2/ |
||||||
|
F: include/configs/khadas-vim2.h |
||||||
|
F: configs/khadas-vim2_defconfig |
@ -0,0 +1,6 @@ |
|||||||
|
# SPDX-License-Identifier: GPL-2.0+
|
||||||
|
#
|
||||||
|
# (C) Copyright 2016 BayLibre, SAS
|
||||||
|
# Author: Neil Armstrong <narmstrong@baylibre.com>
|
||||||
|
|
||||||
|
obj-y := khadas-vim2.o
|
@ -0,0 +1,103 @@ |
|||||||
|
U-Boot for Khadas VIM2 |
||||||
|
======================= |
||||||
|
|
||||||
|
Khadas VIM2 is an Open Source DIY Box manufactured by Shenzhen Wesion |
||||||
|
Technology Co., Ltd with the following specifications: |
||||||
|
|
||||||
|
- Amlogic S912 ARM Cortex-A53 octo-core SoC @ 1.5GHz |
||||||
|
- ARM Mali T860 GPU |
||||||
|
- 2/3GB DDR4 SDRAM |
||||||
|
- 10/100/1000 Ethernet |
||||||
|
- HDMI 2.0 4K/60Hz display |
||||||
|
- 40-pin GPIO header |
||||||
|
- 2 x USB 2.0 Host, 1 x USB 2.0 Type-C OTG |
||||||
|
- 16GB/32GB/64GB eMMC |
||||||
|
- 2MB SPI Flash |
||||||
|
- microSD |
||||||
|
- SDIO Wifi Module, Bluetooth |
||||||
|
- Two channels IR receiver |
||||||
|
|
||||||
|
Currently the u-boot port supports the following devices: |
||||||
|
- serial |
||||||
|
- eMMC, microSD |
||||||
|
- Ethernet |
||||||
|
- I2C |
||||||
|
- Regulators |
||||||
|
- Reset controller |
||||||
|
- Clock controller |
||||||
|
- USB Host |
||||||
|
- ADC |
||||||
|
|
||||||
|
U-Boot compilation |
||||||
|
================== |
||||||
|
|
||||||
|
> export ARCH=arm |
||||||
|
> export CROSS_COMPILE=aarch64-none-elf- |
||||||
|
> make khadas-vim2_defconfig |
||||||
|
> make |
||||||
|
|
||||||
|
Image creation |
||||||
|
============== |
||||||
|
|
||||||
|
Amlogic doesn't provide sources for the firmware and for tools needed |
||||||
|
to create the bootloader image, so it is necessary to obtain them from |
||||||
|
the git tree published by the board vendor: |
||||||
|
|
||||||
|
> wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz |
||||||
|
> wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz |
||||||
|
> tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz |
||||||
|
> tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz |
||||||
|
> export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH |
||||||
|
> git clone https://github.com/khadas/u-boot -b Vim vim-u-boot |
||||||
|
> cd vim-u-boot |
||||||
|
> make kvim_defconfig |
||||||
|
> make |
||||||
|
> export FIPDIR=$PWD/fip |
||||||
|
|
||||||
|
Go back to mainline U-Boot source tree then : |
||||||
|
> mkdir fip |
||||||
|
|
||||||
|
> cp $FIPDIR/gxl/bl2.bin fip/ |
||||||
|
> cp $FIPDIR/gxl/acs.bin fip/ |
||||||
|
> cp $FIPDIR/gxl/bl21.bin fip/ |
||||||
|
> cp $FIPDIR/gxl/bl30.bin fip/ |
||||||
|
> cp $FIPDIR/gxl/bl301.bin fip/ |
||||||
|
> cp $FIPDIR/gxl/bl31.img fip/ |
||||||
|
> cp u-boot.bin fip/bl33.bin |
||||||
|
|
||||||
|
> $FIPDIR/blx_fix.sh \ |
||||||
|
fip/bl30.bin \ |
||||||
|
fip/zero_tmp \ |
||||||
|
fip/bl30_zero.bin \ |
||||||
|
fip/bl301.bin \ |
||||||
|
fip/bl301_zero.bin \ |
||||||
|
fip/bl30_new.bin \ |
||||||
|
bl30 |
||||||
|
|
||||||
|
> python $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0 |
||||||
|
|
||||||
|
> $FIPDIR/blx_fix.sh \ |
||||||
|
fip/bl2_acs.bin \ |
||||||
|
fip/zero_tmp \ |
||||||
|
fip/bl2_zero.bin \ |
||||||
|
fip/bl21.bin \ |
||||||
|
fip/bl21_zero.bin \ |
||||||
|
fip/bl2_new.bin \ |
||||||
|
bl2 |
||||||
|
|
||||||
|
> $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl30_new.bin |
||||||
|
> $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl31.img |
||||||
|
> $FIPDIR/gxl/aml_encrypt_gxl --bl3enc --input fip/bl33.bin |
||||||
|
> $FIPDIR/gxl/aml_encrypt_gxl --bl2sig --input fip/bl2_new.bin --output fip/bl2.n.bin.sig |
||||||
|
> $FIPDIR/gxl/aml_encrypt_gxl --bootmk \ |
||||||
|
--output fip/u-boot.bin \ |
||||||
|
--bl2 fip/bl2.n.bin.sig \ |
||||||
|
--bl30 fip/bl30_new.bin.enc \ |
||||||
|
--bl31 fip/bl31.img.enc \ |
||||||
|
--bl33 fip/bl33.bin.enc |
||||||
|
|
||||||
|
and then write the image to SD with: |
||||||
|
|
||||||
|
> DEV=/dev/your_sd_device |
||||||
|
> dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 |
||||||
|
> dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 |
@ -0,0 +1,62 @@ |
|||||||
|
// SPDX-License-Identifier: GPL-2.0+
|
||||||
|
/*
|
||||||
|
* Copyright (C) 2016 BayLibre, SAS |
||||||
|
* Author: Neil Armstrong <narmstrong@baylibre.com> |
||||||
|
*/ |
||||||
|
|
||||||
|
#include <common.h> |
||||||
|
#include <dm.h> |
||||||
|
#include <environment.h> |
||||||
|
#include <asm/io.h> |
||||||
|
#include <asm/arch/gx.h> |
||||||
|
#include <asm/arch/mem.h> |
||||||
|
#include <asm/arch/sm.h> |
||||||
|
#include <asm/arch/eth.h> |
||||||
|
|
||||||
|
#define EFUSE_SN_OFFSET 20 |
||||||
|
#define EFUSE_SN_SIZE 16 |
||||||
|
#define EFUSE_MAC_OFFSET 52 |
||||||
|
#define EFUSE_MAC_SIZE 6 |
||||||
|
|
||||||
|
int board_init(void) |
||||||
|
{ |
||||||
|
return 0; |
||||||
|
} |
||||||
|
|
||||||
|
int misc_init_r(void) |
||||||
|
{ |
||||||
|
u8 mac_addr[EFUSE_MAC_SIZE]; |
||||||
|
char serial[EFUSE_SN_SIZE]; |
||||||
|
ssize_t len; |
||||||
|
|
||||||
|
meson_gx_eth_init(PHY_INTERFACE_MODE_RGMII, 0); |
||||||
|
|
||||||
|
/* Reset PHY on GPIOZ_14 */ |
||||||
|
clrbits_le32(GX_GPIO_EN(3), BIT(14)); |
||||||
|
clrbits_le32(GX_GPIO_OUT(3), BIT(14)); |
||||||
|
mdelay(10); |
||||||
|
setbits_le32(GX_GPIO_OUT(3), BIT(14)); |
||||||
|
|
||||||
|
if (!eth_env_get_enetaddr("ethaddr", mac_addr)) { |
||||||
|
len = meson_sm_read_efuse(EFUSE_MAC_OFFSET, |
||||||
|
mac_addr, EFUSE_MAC_SIZE); |
||||||
|
if (len == EFUSE_MAC_SIZE && is_valid_ethaddr(mac_addr)) |
||||||
|
eth_env_set_enetaddr("ethaddr", mac_addr); |
||||||
|
} |
||||||
|
|
||||||
|
if (!env_get("serial#")) { |
||||||
|
len = meson_sm_read_efuse(EFUSE_SN_OFFSET, serial, |
||||||
|
EFUSE_SN_SIZE); |
||||||
|
if (len == EFUSE_SN_SIZE) |
||||||
|
env_set("serial#", serial); |
||||||
|
} |
||||||
|
|
||||||
|
return 0; |
||||||
|
} |
||||||
|
|
||||||
|
int ft_board_setup(void *blob, bd_t *bd) |
||||||
|
{ |
||||||
|
meson_gx_init_reserved_memory(blob); |
||||||
|
|
||||||
|
return 0; |
||||||
|
} |
@ -0,0 +1,51 @@ |
|||||||
|
CONFIG_ARM=y |
||||||
|
CONFIG_ARCH_MESON=y |
||||||
|
CONFIG_SYS_TEXT_BASE=0x01000000 |
||||||
|
CONFIG_MESON_GXM=y |
||||||
|
CONFIG_TARGET_KHADAS_VIM2=y |
||||||
|
CONFIG_DEBUG_UART_BASE=0xc81004c0 |
||||||
|
CONFIG_DEBUG_UART_CLOCK=24000000 |
||||||
|
CONFIG_IDENT_STRING=" khadas-vim2" |
||||||
|
CONFIG_DEFAULT_DEVICE_TREE="meson-gxm-khadas-vim2" |
||||||
|
CONFIG_DEBUG_UART=y |
||||||
|
CONFIG_OF_BOARD_SETUP=y |
||||||
|
# CONFIG_DISPLAY_CPUINFO is not set |
||||||
|
# CONFIG_DISPLAY_BOARDINFO is not set |
||||||
|
# CONFIG_CMD_BDI is not set |
||||||
|
# CONFIG_CMD_IMI is not set |
||||||
|
CONFIG_CMD_ADC=y |
||||||
|
CONFIG_CMD_GPIO=y |
||||||
|
# CONFIG_CMD_LOADS is not set |
||||||
|
CONFIG_CMD_MMC=y |
||||||
|
CONFIG_CMD_USB=y |
||||||
|
# CONFIG_CMD_SETEXPR is not set |
||||||
|
CONFIG_CMD_REGULATOR=y |
||||||
|
CONFIG_ADC=y |
||||||
|
CONFIG_SARADC_MESON=y |
||||||
|
CONFIG_OF_CONTROL=y |
||||||
|
CONFIG_NET_RANDOM_ETHADDR=y |
||||||
|
CONFIG_DM_GPIO=y |
||||||
|
CONFIG_DM_REGULATOR=y |
||||||
|
CONFIG_DM_REGULATOR_FIXED=y |
||||||
|
CONFIG_DM_RESET=y |
||||||
|
CONFIG_DM_MMC=y |
||||||
|
CONFIG_MMC_MESON_GX=y |
||||||
|
CONFIG_DM_ETH=y |
||||||
|
CONFIG_ETH_DESIGNWARE=y |
||||||
|
CONFIG_PINCTRL=y |
||||||
|
CONFIG_PINCTRL_MESON_GXL=y |
||||||
|
CONFIG_DEBUG_UART_MESON=y |
||||||
|
CONFIG_DEBUG_UART_ANNOUNCE=y |
||||||
|
CONFIG_DEBUG_UART_SKIP_INIT=y |
||||||
|
CONFIG_MESON_SERIAL=y |
||||||
|
CONFIG_OF_LIBFDT_OVERLAY=y |
||||||
|
CONFIG_USB=y |
||||||
|
CONFIG_DM_USB=y |
||||||
|
CONFIG_USB_XHCI_HCD=y |
||||||
|
CONFIG_USB_XHCI_DWC3=y |
||||||
|
CONFIG_USB_XHCI_DWC3_OF_SIMPLE=y |
||||||
|
CONFIG_USB_DWC3=y |
||||||
|
CONFIG_USB_STORAGE=y |
||||||
|
CONFIG_PHY=y |
||||||
|
CONFIG_MESON_GXL_USB_PHY=y |
||||||
|
CONFIG_MTD=y |
@ -0,0 +1,18 @@ |
|||||||
|
/* SPDX-License-Identifier: GPL-2.0+ */ |
||||||
|
/*
|
||||||
|
* Configuration for Khadas VIM2 |
||||||
|
* |
||||||
|
* Copyright (C) 2017 Baylibre, SAS |
||||||
|
* Author: Neil Armstrong <narmstrong@baylibre.com> |
||||||
|
*/ |
||||||
|
|
||||||
|
#ifndef __CONFIG_H |
||||||
|
#define __CONFIG_H |
||||||
|
|
||||||
|
#define CONFIG_MISC_INIT_R |
||||||
|
|
||||||
|
#define MESON_FDTFILE_SETTING "fdtfile=amlogic/meson-gxm-khadas-vim2.dtb\0" |
||||||
|
|
||||||
|
#include <configs/meson-gx-common.h> |
||||||
|
|
||||||
|
#endif /* __CONFIG_H */ |
Loading…
Reference in new issue