This is a series of line cards for Allied Telesis's SBx8100 chassis switch. The CPU block is common to the SBx81GP24 and SBx81GT24 cards cards collectively referred to as SBx81LIFXCAT in u-boot. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>lime2-spi
parent
14deee2081
commit
a6477f7cbc
@ -0,0 +1,145 @@ |
|||||||
|
// SPDX-License-Identifier: GPL-2.0 |
||||||
|
/dts-v1/; |
||||||
|
|
||||||
|
#include "kirkwood.dtsi" |
||||||
|
#include "kirkwood-98dx4122.dtsi" |
||||||
|
|
||||||
|
/ { |
||||||
|
model = "Allied Telesis SBx81LIFXCAT Board"; |
||||||
|
compatible = "atl,SBx8LIFXCAT", "marvell,kirkwood-98DX4122", |
||||||
|
"marvell,kirkwood"; |
||||||
|
|
||||||
|
memory { |
||||||
|
device_type = "memory"; |
||||||
|
reg = <0x00000000 0x08000000>; /* 128 MB */ |
||||||
|
}; |
||||||
|
|
||||||
|
chosen { |
||||||
|
bootargs = "console=ttyS0,115200n8 earlyprintk"; |
||||||
|
stdout-path = &uart0; |
||||||
|
}; |
||||||
|
|
||||||
|
aliases { |
||||||
|
ethernet0 = ð0; |
||||||
|
i2c0 = &i2c0; |
||||||
|
spi0 = &spi0; |
||||||
|
}; |
||||||
|
|
||||||
|
dsa { |
||||||
|
compatible = "marvell,dsa"; |
||||||
|
#address-cells = <2>; |
||||||
|
#size-cells = <0>; |
||||||
|
dsa,ethernet = <ð0>; |
||||||
|
dsa,mii-bus = <&mdio>; |
||||||
|
status = "okay"; |
||||||
|
|
||||||
|
switch@0 { |
||||||
|
#address-cells = <1>; |
||||||
|
#size-cells = <0>; |
||||||
|
reg = <1 0>; |
||||||
|
|
||||||
|
port@0 { |
||||||
|
reg = <0>; |
||||||
|
label = "internal0"; |
||||||
|
}; |
||||||
|
port@1 { |
||||||
|
reg = <1>; |
||||||
|
label = "internal1"; |
||||||
|
}; |
||||||
|
port@8 { |
||||||
|
reg = <8>; |
||||||
|
label = "internal8"; |
||||||
|
phy-mode = "rgmii-id"; |
||||||
|
fixed-link { |
||||||
|
speed = <1000>; |
||||||
|
full-duplex; |
||||||
|
}; |
||||||
|
}; |
||||||
|
port@9 { |
||||||
|
reg = <9>; |
||||||
|
label = "internal9"; |
||||||
|
phy-mode = "rgmii-id"; |
||||||
|
fixed-link { |
||||||
|
speed = <1000>; |
||||||
|
full-duplex; |
||||||
|
}; |
||||||
|
}; |
||||||
|
port@10 { |
||||||
|
reg = <10>; |
||||||
|
label = "cpu"; |
||||||
|
}; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
gpio-leds { |
||||||
|
compatible = "gpio-leds"; |
||||||
|
|
||||||
|
ledn { |
||||||
|
label = "status:ledn"; |
||||||
|
gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>; |
||||||
|
}; |
||||||
|
|
||||||
|
ledp { |
||||||
|
label = "status:ledp"; |
||||||
|
gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>; |
||||||
|
}; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
&spi0 { |
||||||
|
status = "okay"; |
||||||
|
|
||||||
|
flash@0 { |
||||||
|
#address-cells = <1>; |
||||||
|
#size-cells = <1>; |
||||||
|
compatible = "st,m25p128", "jedec,spi-nor", "spi-flash"; |
||||||
|
reg = <0>; |
||||||
|
spi-max-frequency = <50000000>; |
||||||
|
mode = <0>; |
||||||
|
|
||||||
|
partition@u-boot { |
||||||
|
reg = <0x00000000 0x00c00000>; |
||||||
|
label = "u-boot"; |
||||||
|
}; |
||||||
|
partition@u-boot-env { |
||||||
|
reg = <0x00c00000 0x00040000>; |
||||||
|
label = "u-boot-env"; |
||||||
|
}; |
||||||
|
partition@unused { |
||||||
|
reg = <0x00100000 0x00f00000>; |
||||||
|
label = "unused"; |
||||||
|
}; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
&i2c0 { |
||||||
|
status = "okay"; |
||||||
|
|
||||||
|
eeprom@52 { |
||||||
|
compatible = "atmel,24c04"; |
||||||
|
reg = <0x52>; |
||||||
|
}; |
||||||
|
|
||||||
|
gpio3: gpio@76 { |
||||||
|
#gpio-cells = <2>; |
||||||
|
compatible = "nxp,pca9539"; |
||||||
|
reg = <0x76>; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
&uart0 { |
||||||
|
status = "okay"; |
||||||
|
}; |
||||||
|
|
||||||
|
&mdio { |
||||||
|
status = "okay"; |
||||||
|
}; |
||||||
|
|
||||||
|
ð0 { |
||||||
|
status = "okay"; |
||||||
|
|
||||||
|
ethernet0-port@0 { |
||||||
|
speed = <1000>; |
||||||
|
duplex = <1>; |
||||||
|
}; |
||||||
|
}; |
@ -0,0 +1,12 @@ |
|||||||
|
if TARGET_SBx81LIFXCAT |
||||||
|
|
||||||
|
config SYS_BOARD |
||||||
|
default "SBx81LIFXCAT" |
||||||
|
|
||||||
|
config SYS_VENDOR |
||||||
|
default "alliedtelesis" |
||||||
|
|
||||||
|
config SYS_CONFIG_NAME |
||||||
|
default "SBx81LIFXCAT" |
||||||
|
|
||||||
|
endif |
@ -0,0 +1,7 @@ |
|||||||
|
SBx81LIFXCAT BOARD |
||||||
|
M: Chris Packham <chris.packham@alliedtelesis.co.nz> |
||||||
|
S: Maintained |
||||||
|
F: board/alliedtelesis/SBx81LIFXCAT/ |
||||||
|
F: include/configs/SBx81LIFXCAT |
||||||
|
F: configs/SBx81LIFXCAT_defconfig |
||||||
|
F: arch/arm/dts/kirkwood-atl-sbx81lifxcat.dts |
@ -0,0 +1,7 @@ |
|||||||
|
# SPDX-License-Identifier: GPL-2.0+
|
||||||
|
#
|
||||||
|
# (C) Copyright 2010, 2018
|
||||||
|
# Allied Telesis <www.alliedtelesis.com>
|
||||||
|
#
|
||||||
|
|
||||||
|
obj-y += sbx81lifxcat.o
|
@ -0,0 +1,49 @@ |
|||||||
|
# SPDX-License-Identifier: GPL-2.0+ |
||||||
|
# |
||||||
|
# (C) Copyright 2018 Allied Telesis |
||||||
|
# |
||||||
|
# Refer docs/README.kwimage for more details about how-to configure |
||||||
|
# and create kirkwood boot image |
||||||
|
# |
||||||
|
|
||||||
|
# Boot Media configurations |
||||||
|
BOOT_FROM spi # Boot from SPI flash |
||||||
|
|
||||||
|
# SOC registers configuration using bootrom header extension |
||||||
|
# Maximum KWBIMAGE_MAX_CONFIG configurations allowed |
||||||
|
DATA 0xffd100e0 0x1b1b1b1b |
||||||
|
DATA 0xffd20134 0xffffffff |
||||||
|
DATA 0xffd20138 0x009fffff |
||||||
|
DATA 0xffd20154 0x00000000 |
||||||
|
DATA 0xffd2014c 0x00000000 |
||||||
|
DATA 0xffd20148 0x00000001 |
||||||
|
|
||||||
|
# Dram initalization for 1 x x16 |
||||||
|
# DDR II Micron part number MT47H64M16HR-3 |
||||||
|
# MClk 333MHz, Size 128MB, ECC disable |
||||||
|
# |
||||||
|
DATA 0xffd01400 0x43000618 |
||||||
|
DATA 0xffd01404 0x38543000 |
||||||
|
DATA 0xffd01408 0x23125441 |
||||||
|
DATA 0xffd0140c 0x00000832 |
||||||
|
DATA 0xffd01410 0x0000000D |
||||||
|
DATA 0xffd01414 0x00000000 |
||||||
|
DATA 0xffd01418 0x00000000 |
||||||
|
DATA 0xffd0141c 0x00000652 |
||||||
|
DATA 0xffd01420 0x00000042 |
||||||
|
DATA 0xffd01424 0x0000F0FF |
||||||
|
DATA 0xffd01428 0x00074410 |
||||||
|
DATA 0xffd0147C 0x00007441 |
||||||
|
DATA 0xffd01500 0x00000000 # SDRAM CS[0] Base address at 0x00000000 |
||||||
|
DATA 0xffd01504 0x07FFFFF1 # SDRAM CS[0] Size 128MiB |
||||||
|
DATA 0xffd01508 0x10000000 |
||||||
|
DATA 0xffd0150c 0x00FFFFF4 # SDRAM CS[1] Size, window disabled |
||||||
|
DATA 0xffd01514 0x00FFFFF8 # SDRAM CS[2] Size, window disabled |
||||||
|
DATA 0xffd0151c 0x00FFFFFC # SDRAM CS[3] Size, window disabled |
||||||
|
DATA 0xffd01494 0x84210000 |
||||||
|
DATA 0xffd01498 0x00000000 |
||||||
|
DATA 0xffd0149c 0x0000F80F |
||||||
|
DATA 0xffd01480 0x00000001 |
||||||
|
|
||||||
|
# End of Header extension |
||||||
|
DATA 0x0 0x0 |
@ -0,0 +1,134 @@ |
|||||||
|
// SPDX-License-Identifier: GPL-2.0+
|
||||||
|
/*
|
||||||
|
* (C) Copyright 2010, 2018 |
||||||
|
* Allied Telesis <www.alliedtelesis.com> |
||||||
|
*/ |
||||||
|
|
||||||
|
#include <common.h> |
||||||
|
#include <miiphy.h> |
||||||
|
#include <netdev.h> |
||||||
|
#include <led.h> |
||||||
|
#include <linux/io.h> |
||||||
|
#include <asm/arch/cpu.h> |
||||||
|
#include <asm/arch/soc.h> |
||||||
|
#include <asm/arch/mpp.h> |
||||||
|
#include <asm/arch/gpio.h> |
||||||
|
|
||||||
|
#define SBX81LIFXCAT_OE_LOW (~0) |
||||||
|
#define SBX81LIFXCAT_OE_HIGH (~BIT(11)) |
||||||
|
#define SBX81LIFXCAT_OE_VAL_LOW (0) |
||||||
|
#define SBX81LIFXCAT_OE_VAL_HIGH (BIT(11)) |
||||||
|
|
||||||
|
DECLARE_GLOBAL_DATA_PTR; |
||||||
|
|
||||||
|
int board_early_init_f(void) |
||||||
|
{ |
||||||
|
/*
|
||||||
|
* default gpio configuration |
||||||
|
* There are maximum 64 gpios controlled through 2 sets of registers |
||||||
|
* the below configuration configures mainly initial LED status |
||||||
|
*/ |
||||||
|
mvebu_config_gpio(SBX81LIFXCAT_OE_VAL_LOW, |
||||||
|
SBX81LIFXCAT_OE_VAL_HIGH, |
||||||
|
SBX81LIFXCAT_OE_LOW, SBX81LIFXCAT_OE_HIGH); |
||||||
|
|
||||||
|
/* Multi-Purpose Pins Functionality configuration */ |
||||||
|
static const u32 kwmpp_config[] = { |
||||||
|
MPP0_SPI_SCn, |
||||||
|
MPP1_SPI_MOSI, |
||||||
|
MPP2_SPI_SCK, |
||||||
|
MPP3_SPI_MISO, |
||||||
|
MPP4_NF_IO6, |
||||||
|
MPP5_NF_IO7, |
||||||
|
MPP6_SYSRST_OUTn, |
||||||
|
MPP7_GPO, |
||||||
|
MPP8_TW_SDA, |
||||||
|
MPP9_TW_SCK, |
||||||
|
MPP10_UART0_TXD, |
||||||
|
MPP11_UART0_RXD, |
||||||
|
MPP12_GPO, |
||||||
|
MPP13_UART1_TXD, |
||||||
|
MPP14_UART1_RXD, |
||||||
|
MPP15_GPIO, |
||||||
|
MPP16_GPIO, |
||||||
|
MPP17_GPIO, |
||||||
|
MPP18_NF_IO0, |
||||||
|
MPP19_NF_IO1, |
||||||
|
MPP20_GE1_0, |
||||||
|
MPP21_GE1_1, |
||||||
|
MPP22_GE1_2, |
||||||
|
MPP23_GE1_3, |
||||||
|
MPP24_GE1_4, |
||||||
|
MPP25_GE1_5, |
||||||
|
MPP26_GE1_6, |
||||||
|
MPP27_GE1_7, |
||||||
|
MPP28_GE1_8, |
||||||
|
MPP29_GE1_9, |
||||||
|
MPP30_GE1_10, |
||||||
|
MPP31_GE1_11, |
||||||
|
MPP32_GE1_12, |
||||||
|
MPP33_GE1_13, |
||||||
|
MPP34_GPIO, |
||||||
|
MPP35_GPIO, |
||||||
|
MPP36_GPIO, |
||||||
|
MPP37_GPIO, |
||||||
|
MPP38_GPIO, |
||||||
|
MPP39_GPIO, |
||||||
|
MPP40_GPIO, |
||||||
|
MPP41_GPIO, |
||||||
|
MPP42_GPIO, |
||||||
|
MPP43_GPIO, |
||||||
|
MPP44_GPIO, |
||||||
|
MPP45_GPIO, |
||||||
|
MPP46_GPIO, |
||||||
|
MPP47_GPIO, |
||||||
|
MPP48_GPIO, |
||||||
|
MPP49_GPIO, |
||||||
|
0 |
||||||
|
}; |
||||||
|
|
||||||
|
kirkwood_mpp_conf(kwmpp_config, NULL); |
||||||
|
return 0; |
||||||
|
} |
||||||
|
|
||||||
|
int board_init(void) |
||||||
|
{ |
||||||
|
/* address of boot parameters */ |
||||||
|
gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100; |
||||||
|
|
||||||
|
return 0; |
||||||
|
} |
||||||
|
|
||||||
|
#ifdef CONFIG_RESET_PHY_R |
||||||
|
/* automatically defined by kirkwood config.h */ |
||||||
|
void reset_phy(void) |
||||||
|
{ |
||||||
|
} |
||||||
|
#endif |
||||||
|
|
||||||
|
#ifdef CONFIG_MV88E61XX_SWITCH |
||||||
|
int mv88e61xx_hw_reset(struct phy_device *phydev) |
||||||
|
{ |
||||||
|
phydev->advertising = ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full; |
||||||
|
|
||||||
|
return 0; |
||||||
|
} |
||||||
|
#endif |
||||||
|
|
||||||
|
#ifdef CONFIG_MISC_INIT_R |
||||||
|
int misc_init_r(void) |
||||||
|
{ |
||||||
|
struct udevice *dev; |
||||||
|
int ret; |
||||||
|
|
||||||
|
ret = led_get_by_label("status:ledp", &dev); |
||||||
|
if (!ret) |
||||||
|
led_set_state(dev, LEDST_ON); |
||||||
|
|
||||||
|
ret = led_get_by_label("status:ledn", &dev); |
||||||
|
if (!ret) |
||||||
|
led_set_state(dev, LEDST_OFF); |
||||||
|
|
||||||
|
return 0; |
||||||
|
} |
||||||
|
#endif |
@ -0,0 +1,44 @@ |
|||||||
|
CONFIG_ARM=y |
||||||
|
CONFIG_KIRKWOOD=y |
||||||
|
CONFIG_SYS_TEXT_BASE=0x00600000 |
||||||
|
CONFIG_TARGET_SBx81LIFXCAT=y |
||||||
|
CONFIG_IDENT_STRING="\nSBx81LIFXCAT" |
||||||
|
CONFIG_DEFAULT_DEVICE_TREE="kirkwood-atl-sbx81lifxcat" |
||||||
|
# CONFIG_SYS_MALLOC_F is not set |
||||||
|
CONFIG_BOOTDELAY=3 |
||||||
|
CONFIG_SILENT_CONSOLE=y |
||||||
|
CONFIG_SILENT_U_BOOT_ONLY=y |
||||||
|
CONFIG_HUSH_PARSER=y |
||||||
|
# CONFIG_CMD_FLASH is not set |
||||||
|
CONFIG_CMD_GPIO=y |
||||||
|
CONFIG_CMD_I2C=y |
||||||
|
CONFIG_CMD_SF=y |
||||||
|
CONFIG_CMD_DHCP=y |
||||||
|
CONFIG_BOOTP_NTPSERVER=y |
||||||
|
CONFIG_CMD_MII=y |
||||||
|
CONFIG_CMD_PING=y |
||||||
|
CONFIG_CMD_SNTP=y |
||||||
|
# CONFIG_CMD_LED is not set |
||||||
|
CONFIG_OF_CONTROL=y |
||||||
|
CONFIG_ENV_IS_IN_SPI_FLASH=y |
||||||
|
CONFIG_DM=y |
||||||
|
CONFIG_DM_GPIO=y |
||||||
|
CONFIG_DM_PCA953X=y |
||||||
|
CONFIG_DM_I2C=y |
||||||
|
CONFIG_SYS_I2C_MVTWSI=y |
||||||
|
CONFIG_I2C_MUX=y |
||||||
|
CONFIG_I2C_MUX_PCA954x=y |
||||||
|
CONFIG_LED=y |
||||||
|
CONFIG_LED_GPIO=y |
||||||
|
# CONFIG_MMC is not set |
||||||
|
CONFIG_SPI_FLASH=y |
||||||
|
CONFIG_SPI_FLASH_STMICRO=y |
||||||
|
# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set |
||||||
|
CONFIG_PHYLIB=y |
||||||
|
CONFIG_MV88E61XX_SWITCH=y |
||||||
|
CONFIG_MV88E61XX_CPU_PORT=10 |
||||||
|
CONFIG_MV88E61XX_PHY_PORTS=0x003 |
||||||
|
CONFIG_MV88E61XX_FIXED_PORTS=0x300 |
||||||
|
CONFIG_MV88E61XX_RGMII_DELAY=y |
||||||
|
CONFIG_SPI=y |
||||||
|
CONFIG_KIRKWOOD_SPI=y |
@ -0,0 +1,114 @@ |
|||||||
|
/* SPDX-License-Identifier: GPL-2.0+ */ |
||||||
|
/*
|
||||||
|
* (C) Copyright 2016 Allied Telesis <www.alliedtelesis.co.nz> |
||||||
|
*/ |
||||||
|
|
||||||
|
#ifndef _CONFIG_SBX81LIFXCAT_H |
||||||
|
#define _CONFIG_SBX81LIFXCAT_H |
||||||
|
|
||||||
|
/*
|
||||||
|
* High Level Configuration Options (easy to change) |
||||||
|
*/ |
||||||
|
#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */ |
||||||
|
#define CONFIG_KW88F6281 1 /* SOC Name */ |
||||||
|
#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ |
||||||
|
#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage.cfg |
||||||
|
#define CONFIG_BUILD_TARGET "u-boot.kwb" |
||||||
|
|
||||||
|
/* additions for new ARM relocation support */ |
||||||
|
#define CONFIG_SYS_SDRAM_BASE 0x00000000 |
||||||
|
|
||||||
|
#define CONFIG_MD5 /* get_random_hex on krikwood needs MD5 support */ |
||||||
|
#define CONFIG_KIRKWOOD_EGIGA_INIT /* Enable GbePort0/1 for kernel */ |
||||||
|
#define CONFIG_KIRKWOOD_PCIE_INIT /* Enable PCIE Port0 */ |
||||||
|
#define CONFIG_KIRKWOOD_RGMII_PAD_1V8 /* Set RGMII Pad voltage to 1.8V */ |
||||||
|
#define CONFIG_KIRKWOOD_GPIO 1 |
||||||
|
|
||||||
|
#define CONFIG_MISC_INIT_R /* call misc_init_r */ |
||||||
|
|
||||||
|
/*
|
||||||
|
* NS16550 Configuration |
||||||
|
*/ |
||||||
|
#define CONFIG_SYS_NS16550 |
||||||
|
#define CONFIG_SYS_NS16550_SERIAL |
||||||
|
#define CONFIG_SYS_NS16550_REG_SIZE (-4) |
||||||
|
#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_TCLK |
||||||
|
#define CONFIG_SYS_NS16550_COM1 KW_UART0_BASE |
||||||
|
|
||||||
|
/*
|
||||||
|
* Serial Port configuration |
||||||
|
* The following definitions let you select what serial you want to use |
||||||
|
* for your console driver. |
||||||
|
*/ |
||||||
|
|
||||||
|
#define CONFIG_CONS_INDEX 1 /*Console on UART0 */ |
||||||
|
|
||||||
|
/*
|
||||||
|
* For booting Linux, the board info and command line data |
||||||
|
* have to be in the first 8 MB of memory, since this is |
||||||
|
* the maximum mapped by the Linux kernel during initialization. |
||||||
|
*/ |
||||||
|
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ |
||||||
|
#define CONFIG_INITRD_TAG 1 /* enable INITRD tag */ |
||||||
|
#define CONFIG_SETUP_MEMORY_TAGS 1 /* enable memory tag */ |
||||||
|
|
||||||
|
#define MTDPARTS_DEFAULT "mtdparts=spi0.0:768K(boot)ro,256K(boot-env),14M(user),1M(errlog)" |
||||||
|
#define MTDPARTS_MTDOOPS "errlog" |
||||||
|
#define CONFIG_DOS_PARTITION |
||||||
|
|
||||||
|
/*
|
||||||
|
* Environment variables configurations |
||||||
|
*/ |
||||||
|
#define CONFIG_ENV_SPI_BUS 0 |
||||||
|
#define CONFIG_ENV_SPI_CS 0 |
||||||
|
#define CONFIG_ENV_SPI_MAX_HZ 20000000 /* 20Mhz */ |
||||||
|
#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE |
||||||
|
#define CONFIG_ENV_SECT_SIZE 0x40000 /* 256K */ |
||||||
|
#define CONFIG_ENV_SIZE 0x02000 |
||||||
|
#define CONFIG_ENV_OFFSET 0xc0000 /* env starts here - 768K */ |
||||||
|
|
||||||
|
/*
|
||||||
|
* U-Boot bootcode configuration |
||||||
|
*/ |
||||||
|
|
||||||
|
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for monitor */ |
||||||
|
#define CONFIG_SYS_MALLOC_LEN (4 << 20) /* Reserve 4.0 MB for malloc */ |
||||||
|
|
||||||
|
/*
|
||||||
|
* For booting Linux, the board info and command line data |
||||||
|
* have to be in the first 8 MB of memory, since this is |
||||||
|
* the maximum mapped by the Linux kernel during initialization. |
||||||
|
*/ |
||||||
|
#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Mem map for Linux*/ |
||||||
|
|
||||||
|
/* size in bytes reserved for initial data */ |
||||||
|
|
||||||
|
#include <asm/arch/config.h> |
||||||
|
/* There is no PHY directly connected so don't ask it for link status */ |
||||||
|
#undef CONFIG_SYS_FAULT_ECHO_LINK_DOWN |
||||||
|
|
||||||
|
/*
|
||||||
|
* Other required minimal configurations |
||||||
|
*/ |
||||||
|
#define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */ |
||||||
|
#define CONFIG_NR_DRAM_BANKS 4 |
||||||
|
#define CONFIG_SYS_MEMTEST_START 0x00400000 /* 4M */ |
||||||
|
#define CONFIG_SYS_MEMTEST_END 0x007fffff /*(_8M -1) */ |
||||||
|
#define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */ |
||||||
|
|
||||||
|
/*
|
||||||
|
* Ethernet Driver configuration |
||||||
|
*/ |
||||||
|
#ifdef CONFIG_CMD_NET |
||||||
|
#define CONFIG_NETCONSOLE /* include NetConsole support */ |
||||||
|
#define CONFIG_NET_MULTI /* specify more that one ports available */ |
||||||
|
#define CONFIG_MII /* expose smi over miiphy interface */ |
||||||
|
#define CONFIG_MVGBE /* Enable kirkwood Gbe Controller Driver */ |
||||||
|
#define CONFIG_MVGBE_PORTS {1, 0} /* enable a single port */ |
||||||
|
#define CONFIG_PHY_BASE_ADR 0x01 |
||||||
|
#define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */ |
||||||
|
#endif /* CONFIG_CMD_NET */ |
||||||
|
|
||||||
|
#define CONFIG_SYS_LOAD_ADDR 0x1000000 /* default location for tftp and bootm */ |
||||||
|
|
||||||
|
#endif /* _CONFIG_SBX81LIFXCAT_H */ |
Loading…
Reference in new issue