Pine H64 is a SBC with Allwinner H6 SoC produced by Pine64. It features 1GiB/2GiB/4GiB(3GiB usable) DRAM, two USB 2.0 ports, one USB 3.0 port and a mPCIE slot. Add support for it. The device tree is from Linux next-20180720. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com>lime2-spi
parent
6f796a9bb4
commit
a8407b5642
@ -0,0 +1,185 @@ |
|||||||
|
// SPDX-License-Identifier: (GPL-2.0+ or MIT) |
||||||
|
/* |
||||||
|
* Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.io> |
||||||
|
*/ |
||||||
|
|
||||||
|
/dts-v1/; |
||||||
|
|
||||||
|
#include "sun50i-h6.dtsi" |
||||||
|
|
||||||
|
#include <dt-bindings/gpio/gpio.h> |
||||||
|
|
||||||
|
/ { |
||||||
|
model = "Pine H64"; |
||||||
|
compatible = "pine64,pine-h64", "allwinner,sun50i-h6"; |
||||||
|
|
||||||
|
aliases { |
||||||
|
serial0 = &uart0; |
||||||
|
}; |
||||||
|
|
||||||
|
chosen { |
||||||
|
stdout-path = "serial0:115200n8"; |
||||||
|
}; |
||||||
|
|
||||||
|
leds { |
||||||
|
compatible = "gpio-leds"; |
||||||
|
|
||||||
|
heartbeat { |
||||||
|
label = "pine-h64:green:heartbeat"; |
||||||
|
gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */ |
||||||
|
}; |
||||||
|
|
||||||
|
link { |
||||||
|
label = "pine-h64:white:link"; |
||||||
|
gpios = <&r_pio 0 3 GPIO_ACTIVE_HIGH>; /* PL3 */ |
||||||
|
}; |
||||||
|
|
||||||
|
status { |
||||||
|
label = "pine-h64:blue:status"; |
||||||
|
gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */ |
||||||
|
}; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
&mmc0 { |
||||||
|
pinctrl-names = "default"; |
||||||
|
pinctrl-0 = <&mmc0_pins>; |
||||||
|
vmmc-supply = <®_cldo1>; |
||||||
|
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; |
||||||
|
status = "okay"; |
||||||
|
}; |
||||||
|
|
||||||
|
&mmc2 { |
||||||
|
pinctrl-names = "default"; |
||||||
|
pinctrl-0 = <&mmc2_pins>; |
||||||
|
vmmc-supply = <®_cldo1>; |
||||||
|
vqmmc-supply = <®_bldo2>; |
||||||
|
non-removable; |
||||||
|
cap-mmc-hw-reset; |
||||||
|
status = "okay"; |
||||||
|
}; |
||||||
|
|
||||||
|
&r_i2c { |
||||||
|
status = "okay"; |
||||||
|
|
||||||
|
axp805: pmic@36 { |
||||||
|
compatible = "x-powers,axp805", "x-powers,axp806"; |
||||||
|
reg = <0x36>; |
||||||
|
interrupt-parent = <&r_intc>; |
||||||
|
interrupts = <0 IRQ_TYPE_LEVEL_LOW>; |
||||||
|
interrupt-controller; |
||||||
|
#interrupt-cells = <1>; |
||||||
|
x-powers,self-working-mode; |
||||||
|
|
||||||
|
regulators { |
||||||
|
reg_aldo1: aldo1 { |
||||||
|
regulator-always-on; |
||||||
|
regulator-min-microvolt = <3300000>; |
||||||
|
regulator-max-microvolt = <3300000>; |
||||||
|
regulator-name = "vcc-pl"; |
||||||
|
}; |
||||||
|
|
||||||
|
reg_aldo2: aldo2 { |
||||||
|
regulator-min-microvolt = <3300000>; |
||||||
|
regulator-max-microvolt = <3300000>; |
||||||
|
regulator-name = "vcc-ac200"; |
||||||
|
}; |
||||||
|
|
||||||
|
reg_aldo3: aldo3 { |
||||||
|
/* This regulator is connected with CLDO1 */ |
||||||
|
regulator-always-on; |
||||||
|
regulator-min-microvolt = <3300000>; |
||||||
|
regulator-max-microvolt = <3300000>; |
||||||
|
regulator-name = "vcc-3v3-1"; |
||||||
|
}; |
||||||
|
|
||||||
|
reg_bldo1: bldo1 { |
||||||
|
regulator-always-on; |
||||||
|
regulator-min-microvolt = <1800000>; |
||||||
|
regulator-max-microvolt = <1800000>; |
||||||
|
regulator-name = "vcc-bias-pll"; |
||||||
|
}; |
||||||
|
|
||||||
|
reg_bldo2: bldo2 { |
||||||
|
regulator-always-on; |
||||||
|
regulator-min-microvolt = <1800000>; |
||||||
|
regulator-max-microvolt = <1800000>; |
||||||
|
regulator-name = "vcc-efuse-pcie-hdmi-io"; |
||||||
|
}; |
||||||
|
|
||||||
|
reg_bldo3: bldo3 { |
||||||
|
regulator-always-on; |
||||||
|
regulator-min-microvolt = <1800000>; |
||||||
|
regulator-max-microvolt = <1800000>; |
||||||
|
regulator-name = "vcc-dcxoio"; |
||||||
|
}; |
||||||
|
|
||||||
|
bldo4 { |
||||||
|
/* unused */ |
||||||
|
}; |
||||||
|
|
||||||
|
reg_cldo1: cldo1 { |
||||||
|
/* This regulator is connected with ALDO3 */ |
||||||
|
regulator-always-on; |
||||||
|
regulator-min-microvolt = <3300000>; |
||||||
|
regulator-max-microvolt = <3300000>; |
||||||
|
regulator-name = "vcc-3v3-2"; |
||||||
|
}; |
||||||
|
|
||||||
|
reg_cldo2: cldo2 { |
||||||
|
regulator-min-microvolt = <3300000>; |
||||||
|
regulator-max-microvolt = <3300000>; |
||||||
|
regulator-name = "vcc-wifi-1"; |
||||||
|
}; |
||||||
|
|
||||||
|
reg_cldo3: cldo3 { |
||||||
|
regulator-min-microvolt = <3300000>; |
||||||
|
regulator-max-microvolt = <3300000>; |
||||||
|
regulator-name = "vcc-wifi-2"; |
||||||
|
}; |
||||||
|
|
||||||
|
reg_dcdca: dcdca { |
||||||
|
regulator-always-on; |
||||||
|
regulator-min-microvolt = <810000>; |
||||||
|
regulator-max-microvolt = <1080000>; |
||||||
|
regulator-name = "vdd-cpu"; |
||||||
|
}; |
||||||
|
|
||||||
|
reg_dcdcc: dcdcc { |
||||||
|
regulator-min-microvolt = <810000>; |
||||||
|
regulator-max-microvolt = <1080000>; |
||||||
|
regulator-name = "vdd-gpu"; |
||||||
|
}; |
||||||
|
|
||||||
|
reg_dcdcd: dcdcd { |
||||||
|
regulator-always-on; |
||||||
|
regulator-min-microvolt = <960000>; |
||||||
|
regulator-max-microvolt = <960000>; |
||||||
|
regulator-name = "vdd-sys"; |
||||||
|
}; |
||||||
|
|
||||||
|
reg_dcdce: dcdce { |
||||||
|
regulator-always-on; |
||||||
|
regulator-min-microvolt = <1200000>; |
||||||
|
regulator-max-microvolt = <1200000>; |
||||||
|
regulator-name = "vcc-dram"; |
||||||
|
}; |
||||||
|
|
||||||
|
sw { |
||||||
|
/* unused */ |
||||||
|
}; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
pcf8563: rtc@51 { |
||||||
|
compatible = "nxp,pcf8563"; |
||||||
|
reg = <0x51>; |
||||||
|
#clock-cells = <0>; |
||||||
|
}; |
||||||
|
}; |
||||||
|
|
||||||
|
&uart0 { |
||||||
|
pinctrl-names = "default"; |
||||||
|
pinctrl-0 = <&uart0_ph_pins>; |
||||||
|
status = "okay"; |
||||||
|
}; |
@ -0,0 +1,15 @@ |
|||||||
|
CONFIG_ARM=y |
||||||
|
CONFIG_ARCH_SUNXI=y |
||||||
|
CONFIG_MACH_SUN50I_H6=y |
||||||
|
CONFIG_DRAM_ODT_EN=y |
||||||
|
CONFIG_MMC0_CD_PIN="PF6" |
||||||
|
CONFIG_MMC_SUNXI_SLOT_EXTRA=2 |
||||||
|
# CONFIG_PSCI_RESET is not set |
||||||
|
CONFIG_DEFAULT_DEVICE_TREE="sun50i-h6-pine-h64" |
||||||
|
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set |
||||||
|
CONFIG_SPL=y |
||||||
|
# CONFIG_CMD_FLASH is not set |
||||||
|
# CONFIG_CMD_FPGA is not set |
||||||
|
# CONFIG_SPL_DOS_PARTITION is not set |
||||||
|
# CONFIG_SPL_ISO_PARTITION is not set |
||||||
|
# CONFIG_SPL_EFI_PARTITION is not set |
Loading…
Reference in new issue