arm: dts: omap3: Re-sync DTS files with Linux 4.13-RC5

The DTS files had some spacing issues and they needed fixing. This
pull re-sync's the OMAP3xx related DTS files with Linux 4.13-RC5.

To keep the DTS and DTSI files clean and in sync with Linux, new
u-boot.dtsi files are added.

Signed-off-by: Adam Ford <aford173@gmail.com>

V3: The resync broke card detect on MMC1 on Logic PD's Torpedo,
    so we add the cd-invert to the Torpedo's -u-boot.dtsi file.

V2: Add the u-boot.dtsi files for OMAP3, OMAP36xx, and Torpedo
    Remove the need for the second patch in the series

arch/arm/dts/logicpd-torpedo-37xx-devkit-u-boot.dtsi

@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) 2017
+ * Logic PD - http://www.logicpd.com
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+};
+
+&mmc1 {
+	cd-inverted;
+};
+
+&mmc2 {
+      status = "disabled";
+};
+
+&mmc3 {
+      status = "disabled";
+};
+
+&uart1 {
+	reg-shift = <2>;
+};
+
+&uart2 {
+	reg-shift = <2>;
+};
+
+&uart3 {
+	reg-shift = <2>;
+};
+

arch/arm/dts/logicpd-torpedo-37xx-devkit.dts

@@ -14,10 +14,6 @@
 	model = "LogicPD Zoom DM3730 Torpedo + Wireless Development Kit";
 	compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap3630", "ti,omap3";
 
-	chosen {
-		stdout-path = &uart1;
-	};
-
 	gpio_keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
@@ -196,15 +192,12 @@
 	interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins &mmc1_cd>;
+	cd-gpios = <&gpio4 31 IRQ_TYPE_LEVEL_LOW>;		/* gpio127 */
 	vmmc-supply = <&vmmc1>;
 	bus-width = <4>;
 	cap-power-off-card;
 };
 
-&mmc2 {
-	status = "disabled";
-};
-
 &omap3_pmx_core {
 	gpio_key_pins: pinmux_gpio_key_pins {
 		pinctrl-single,pins = <
@@ -256,9 +249,9 @@
 			OMAP3_CORE1_IOPAD(0x2110, PIN_INPUT | MUX_MODE0)   /* cam_xclka.cam_xclka */
 			OMAP3_CORE1_IOPAD(0x2112, PIN_INPUT | MUX_MODE0)   /* cam_pclk.cam_pclk */
 
-			OMAP3_CORE1_IOPAD(0x2114, PIN_INPUT | MUX_MODE0)   /* cam_d0.cam_d0 */
-			OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT | MUX_MODE0)   /* cam_d1.cam_d1 */
-			OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT | MUX_MODE0)   /* cam_d2.cam_d2 */
+			OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT | MUX_MODE0)   /* cam_d0.cam_d0 */
+			OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT | MUX_MODE0)   /* cam_d1.cam_d1 */
+			OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT | MUX_MODE0)   /* cam_d2.cam_d2 */
 			OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT | MUX_MODE0)   /* cam_d3.cam_d3 */
 			OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT | MUX_MODE0)   /* cam_d4.cam_d4 */
 			OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT | MUX_MODE0)   /* cam_d5.cam_d5 */

arch/arm/dts/omap3-cpu-thermal.dtsi

@@ -0,0 +1,20 @@
+/*
+ * Device Tree Source for OMAP3 SoC CPU thermal
+ *
+ * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+
+cpu_thermal: cpu_thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <1000>; /* milliseconds */
+	coefficients = <0 20000>;
+
+			/* sensor       ID */
+	thermal-sensors = <&bandgap     0>;
+};

arch/arm/dts/omap3-u-boot.dtsi

@@ -0,0 +1,19 @@
+/*
+ * Copyright (C) 2017
+ * Logic PD - http://www.logicpd.com
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+&uart1 {
+	reg-shift = <2>;
+};
+
+&uart2 {
+	reg-shift = <2>;
+};
+
+&uart3 {
+	reg-shift = <2>;
+};
+

arch/arm/dts/omap3.dtsi

@@ -107,6 +107,7 @@
 					reg = <0x30 0x238>;
 					#address-cells = <1>;
 					#size-cells = <0>;
+					#pinctrl-cells = <1>;
 					#interrupt-cells = <1>;
 					interrupt-controller;
 					pinctrl-single,register-width = <16>;
@@ -146,6 +147,7 @@
 					reg = <0xa00 0x5c>;
 					#address-cells = <1>;
 					#size-cells = <0>;
+					#pinctrl-cells = <1>;
 					#interrupt-cells = <1>;
 					interrupt-controller;
 					pinctrl-single,register-width = <16>;
@@ -296,6 +298,7 @@
 		uart2: serial@4806c000 {
 			compatible = "ti,omap3-uart";
 			reg = <0x4806c000 0x400>;
+			reg-shift = <2>;
 			interrupts-extended = <&intc 73>;
 			dmas = <&sdma 51 &sdma 52>;
 			dma-names = "tx", "rx";
@@ -306,6 +309,7 @@
 		uart3: serial@49020000 {
 			compatible = "ti,omap3-uart";
 			reg = <0x49020000 0x400>;
+			reg-shift = <2>;
 			interrupts-extended = <&intc 74>;
 			dmas = <&sdma 53 &sdma 54>;
 			dma-names = "tx", "rx";

arch/arm/dts/omap36xx-u-boot.dtsi

@@ -0,0 +1,10 @@
+/*
+ * Copyright (C) 2017
+ * Logic PD - http://www.logicpd.com
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+&uart4 {
+	reg-shift = <2>;
+};

arch/arm/dts/omap36xx.dtsi

@@ -19,7 +19,7 @@
 
 	cpus {
 		/* OMAP3630/OMAP37xx 'standard device' variants OPP50 to OPP130 */
-               cpu@0 {
+		cpu: cpu@0 {
 			operating-points = <
 				/* kHz    uV */
 				300000  1012500
@@ -34,6 +34,7 @@
 		uart4: serial@49042000 {
 			compatible = "ti,omap3-uart";
 			reg = <0x49042000 0x400>;
+			reg-shift = <2>;
 			interrupts = <80>;
 			dmas = <&sdma 81 &sdma 82>;
 			dma-names = "tx", "rx";
@@ -66,6 +67,7 @@
 			reg = <0x480025a0 0x5c>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			#pinctrl-cells = <1>;
 			#interrupt-cells = <1>;
 			interrupt-controller;
 			pinctrl-single,register-width = <16>;
@@ -87,12 +89,16 @@
 			};
 		};
 
-               bandgap@48002524 {
+		bandgap: bandgap@48002524 {
 			reg = <0x48002524 0x4>;
 			compatible = "ti,omap36xx-bandgap";
 			#thermal-sensor-cells = <0>;
 		};
 	};
+
+	thermal_zones: thermal-zones {
+		#include "omap3-cpu-thermal.dtsi"
+	};
 };
 
 /* OMAP3630 needs dss_96m_fck for VENC */

arch/arm/mach-omap2/omap3/Kconfig

@@ -111,6 +111,7 @@ config TARGET_OMAP3_LOGIC
 	select DM
 	select DM_SERIAL
 	select DM_GPIO
+	select OMAP3_GPIO_3
 	select OMAP3_GPIO_4
 	select OMAP3_GPIO_6