Update CHANGELOG, coding style cleanup.

board/atmel/at91rm9200ek/misc.c

@@ -48,4 +48,3 @@ int addr2ram(ulong addr)
 
 	return result;
 }
-

board/digsy_mtc/digsy_mtc.c

@@ -304,4 +304,3 @@ void ft_board_setup(void *blob, bd_t *bd)
 #endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
 
 #endif /* CONFIG_CMD_IDE */
-

board/digsy_mtc/is42s16800a-7t.h

@@ -25,4 +25,3 @@
 #define SDRAM_CONTROL	0x505F0000
 #define SDRAM_CONFIG1	0xD2322900
 #define SDRAM_CONFIG2	0x8AD70000
-

board/esd/dasa_sim/config.mk

@@ -21,4 +21,3 @@
 # MA 02111-1307 USA
 #
 TEXT_BASE = 0xFFFC0000
-

cpu/arm720t/s3c4510b/Makefile

@@ -43,4 +43,3 @@ include $(SRCTREE)/rules.mk
 sinclude $(obj).depend
 
 #########################################################################
-

cpu/s3c44b0/cache.c

@@ -88,4 +88,3 @@ int dcache_status (void)
 {
 	return dcache_status();
 }
-

drivers/block/mg_disk_prv.h

@@ -142,4 +142,3 @@ struct mg_host {
 #endif /* CONFIG_MG_DEBUG */
 
 #endif
-

drivers/qe/qe.c

@@ -162,7 +162,8 @@ void qe_init(uint qe_base)
 	qe_immr = (qe_map_t *)qe_base;
 
 #ifdef CONFIG_SYS_QE_FW_ADDR
-        /* Upload microcode to IRAM for those SOCs which do not have ROM in QE.
+	/*
+	 * Upload microcode to IRAM for those SOCs which do not have ROM in QE.
 	 */
 	qe_upload_firmware((const struct qe_firmware *) CONFIG_SYS_QE_FW_ADDR);
 

drivers/rtc/s3c44b0_rtc.c

@@ -99,4 +99,3 @@ void rtc_reset (void)
 	BCDSEC = 0;
 	RTCCON &= 1;
 }
-

drivers/serial/serial_lpc2292.c

@@ -102,4 +102,3 @@ int serial_tstc (void)
 {
 	return (GET8(U0LSR) & 1);
 }
-

fs/ubifs/crc16.h

@@ -27,4 +27,3 @@ static inline u16 crc16_byte(u16 crc, const u8 data)
 }
 
 #endif /* __CRC16_H */
-

include/asm-ppc/mp.h

@@ -28,4 +28,3 @@ void cpu_mp_lmb_reserve(struct lmb *lmb);
 u32 determine_mp_bootpg(void);
 
 #endif
-

include/configs/digsy_mtc.h

@@ -343,4 +343,3 @@
 #define CONFIG_LBA48		1
 
 #endif /* __CONFIG_H */
-

lib_generic/vsprintf.c

@@ -200,13 +200,15 @@ static char* put_dec_full(char *buf, unsigned q)
 	d2 = (q>>8) & 0xf;
 	d3 = (q>>12);
 
-	/* Possible ways to approx. divide by 10 */
-	/* gcc -O2 replaces multiply with shifts and adds */
-	// (x * 0xcd) >> 11: 11001101 - shorter code than * 0x67 (on i386)
-	// (x * 0x67) >> 10:  1100111
-	// (x * 0x34) >> 9:    110100 - same
-	// (x * 0x1a) >> 8:     11010 - same
-	// (x * 0x0d) >> 7:      1101 - same, shortest code (on i386)
+	/*
+	 * Possible ways to approx. divide by 10
+	 * gcc -O2 replaces multiply with shifts and adds
+	 * (x * 0xcd) >> 11: 11001101 - shorter code than * 0x67 (on i386)
+	 * (x * 0x67) >> 10:  1100111
+	 * (x * 0x34) >> 9:    110100 - same
+	 * (x * 0x1a) >> 8:     11010 - same
+	 * (x * 0x0d) >> 7:      1101 - same, shortest code (on i386)
+	 */
 
 	d0 = 6*(d3 + d2 + d1) + (q & 0xf);
 	q = (d0 * 0xcd) >> 11;