misc: Add MPC83xx serdes driver

Add a driver to configure the SerDes (Serializer/Deserializer) lanes on
the MPC83xx architecture.

Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Mario Six <mario.six@gdsys.cc>
lime2-spi
Mario Six 6 years ago committed by Simon Glass
parent 19fbdca47b
commit d2166319df
  1. 24
      Documentation/devicetree/bindings/misc/fsl,mpc83xx-serdes.txt
  2. 1
      MAINTAINERS
  3. 4
      arch/powerpc/cpu/mpc83xx/serdes.c
  4. 4
      arch/powerpc/include/asm/fsl_mpc83xx_serdes.h
  5. 7
      drivers/misc/Kconfig
  6. 1
      drivers/misc/Makefile
  7. 185
      drivers/misc/mpc83xx_serdes.c
  8. 232
      drivers/misc/mpc83xx_serdes.h

@ -0,0 +1,24 @@
MPC83xx SerDes controller devices
MPC83xx SoCs contain a built-in SerDes controller that determines which
protocols (SATA, PCI Express, SGMII, ...) are used on the system's serdes lines
and how the lines are configured.
Required properties:
- compatible: must be "fsl,mpc83xx-serdes"
- reg: must point to the serdes controller's register map
- proto: selects for which protocol the serdes lines are configured. One of
"sata", "pex", "pex-x2", "sgmii"
- serdes-clk: determines the frequency the serdes lines are configured for. One
of 100, 125, 150.
- vdd: determines whether 1.0V core VDD is used or not
Example:
SERDES: serdes@e3000 {
reg = <0xe3000 0x200>;
compatible = "fsl,mpc83xx-serdes";
proto = "pex";
serdes-clk = <100>;
vdd;
};

@ -529,6 +529,7 @@ F: include/dt-bindings/clk/mpc83xx-clk.h
F: drivers/timer/mpc83xx_timer.c F: drivers/timer/mpc83xx_timer.c
F: drivers/cpu/mpc83xx_cpu.c F: drivers/cpu/mpc83xx_cpu.c
F: drivers/cpu/mpc83xx_cpu.h F: drivers/cpu/mpc83xx_cpu.h
F: drivers/misc/mpc83xx_serdes.c
F: arch/powerpc/cpu/mpc83xx/ F: arch/powerpc/cpu/mpc83xx/
F: arch/powerpc/include/asm/arch-mpc83xx/ F: arch/powerpc/include/asm/arch-mpc83xx/

@ -8,6 +8,8 @@
* Author: Li Yang <leoli@freescale.com> * Author: Li Yang <leoli@freescale.com>
*/ */
#ifndef CONFIG_MPC83XX_SERDES
#include <config.h> #include <config.h>
#include <common.h> #include <common.h>
#include <asm/io.h> #include <asm/io.h>
@ -148,3 +150,5 @@ void fsl_setup_serdes(u32 offset, char proto, u32 rfcks, char vdd)
tmp |= FSL_SRDSRSTCTL_RST; tmp |= FSL_SRDSRSTCTL_RST;
out_be32(regs + FSL_SRDSRSTCTL_OFFS, tmp); out_be32(regs + FSL_SRDSRSTCTL_OFFS, tmp);
} }
#endif /* !CONFIG_MPC83XX_SERDES */

@ -6,6 +6,8 @@
#ifndef __FSL_MPC83XX_SERDES_H #ifndef __FSL_MPC83XX_SERDES_H
#define __FSL_MPC83XX_SERDES_H #define __FSL_MPC83XX_SERDES_H
#ifndef CONFIG_MPC83XX_SERDES
#include <config.h> #include <config.h>
#define FSL_SERDES_CLK_100 (0 << 28) #define FSL_SERDES_CLK_100 (0 << 28)
@ -19,4 +21,6 @@
extern void fsl_setup_serdes(u32 offset, char proto, u32 rfcks, char vdd); extern void fsl_setup_serdes(u32 offset, char proto, u32 rfcks, char vdd);
#endif /* !CONFIG_MPC83XX_SERDES */
#endif /* __FSL_MPC83XX_SERDES_H */ #endif /* __FSL_MPC83XX_SERDES_H */

@ -288,4 +288,11 @@ config GDSYS_IOEP
depends on MISC depends on MISC
help help
Support gdsys FPGA's IO endpoint driver. Support gdsys FPGA's IO endpoint driver.
config MPC83XX_SERDES
bool "Enable MPC83xx serdes driver"
depends on MISC
help
Support for serdes found on MPC83xx SoCs.
endmenu endmenu

@ -55,3 +55,4 @@ obj-$(CONFIG_STM32MP_FUSE) += stm32mp_fuse.o
obj-$(CONFIG_SYS_DPAA_QBMAN) += fsl_portals.o obj-$(CONFIG_SYS_DPAA_QBMAN) += fsl_portals.o
obj-$(CONFIG_GDSYS_IOEP) += gdsys_ioep.o obj-$(CONFIG_GDSYS_IOEP) += gdsys_ioep.o
obj-$(CONFIG_GDSYS_RXAUI_CTRL) += gdsys_rxaui_ctrl.o obj-$(CONFIG_GDSYS_RXAUI_CTRL) += gdsys_rxaui_ctrl.o
obj-$(CONFIG_MPC83XX_SERDES) += mpc83xx_serdes.o

@ -0,0 +1,185 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2018
* Mario Six, Guntermann & Drunck GmbH, mario.six@gdsys.cc
*
* base on the MPC83xx serdes initialization, which is
*
* Copyright 2007,2011 Freescale Semiconductor, Inc.
* Copyright (C) 2008 MontaVista Software, Inc.
*/
#include <common.h>
#include <dm.h>
#include <mapmem.h>
#include <misc.h>
#include "mpc83xx_serdes.h"
/**
* struct mpc83xx_serdes_priv - Private structure for MPC83xx serdes
* @regs: The device's register map
* @rfcks: Variable to keep the serdes reference clock selection set during
* initialization in (is or'd to every value written to SRDSCR4)
*/
struct mpc83xx_serdes_priv {
struct mpc83xx_serdes_regs *regs;
u32 rfcks;
};
/**
* setup_sata() - Configure the SerDes device to SATA mode
* @dev: The device to configure
*/
static void setup_sata(struct udevice *dev)
{
struct mpc83xx_serdes_priv *priv = dev_get_priv(dev);
/* Set and clear reset bits */
setbits_be32(&priv->regs->srdsrstctl, SRDSRSTCTL_SATA_RESET);
udelay(1000);
clrbits_be32(&priv->regs->srdsrstctl, SRDSRSTCTL_SATA_RESET);
/* Configure SRDSCR0 */
clrsetbits_be32(&priv->regs->srdscr0,
SRDSCR0_TXEQA_MASK | SRDSCR0_TXEQE_MASK,
SRDSCR0_TXEQA_SATA | SRDSCR0_TXEQE_SATA);
/* Configure SRDSCR1 */
clrbits_be32(&priv->regs->srdscr1, SRDSCR1_PLLBW);
/* Configure SRDSCR2 */
clrsetbits_be32(&priv->regs->srdscr2,
SRDSCR2_SEIC_MASK,
SRDSCR2_SEIC_SATA);
/* Configure SRDSCR3 */
out_be32(&priv->regs->srdscr3,
SRDSCR3_KFR_SATA | SRDSCR3_KPH_SATA |
SRDSCR3_SDFM_SATA_PEX | SRDSCR3_SDTXL_SATA);
/* Configure SRDSCR4 */
out_be32(&priv->regs->srdscr4, priv->rfcks | SRDSCR4_PROT_SATA);
}
/**
* setup_pex() - Configure the SerDes device to PCI Express mode
* @dev: The device to configure
* @type: The PCI Express type to configure for (x1 or x2)
*/
static void setup_pex(struct udevice *dev, enum pex_type type)
{
struct mpc83xx_serdes_priv *priv = dev_get_priv(dev);
/* Configure SRDSCR1 */
setbits_be32(&priv->regs->srdscr1, SRDSCR1_PLLBW);
/* Configure SRDSCR2 */
clrsetbits_be32(&priv->regs->srdscr2,
SRDSCR2_SEIC_MASK,
SRDSCR2_SEIC_PEX);
/* Configure SRDSCR3 */
out_be32(&priv->regs->srdscr3, SRDSCR3_SDFM_SATA_PEX);
/* Configure SRDSCR4 */
if (type == PEX_X2)
out_be32(&priv->regs->srdscr4,
priv->rfcks | SRDSCR4_PROT_PEX | SRDSCR4_PLANE_X2);
else
out_be32(&priv->regs->srdscr4,
priv->rfcks | SRDSCR4_PROT_PEX);
}
/**
* setup_sgmii() - Configure the SerDes device to SGMII mode
* @dev: The device to configure
*/
static void setup_sgmii(struct udevice *dev)
{
struct mpc83xx_serdes_priv *priv = dev_get_priv(dev);
/* Configure SRDSCR1 */
clrbits_be32(&priv->regs->srdscr1, SRDSCR1_PLLBW);
/* Configure SRDSCR2 */
clrsetbits_be32(&priv->regs->srdscr2,
SRDSCR2_SEIC_MASK,
SRDSCR2_SEIC_SGMII);
/* Configure SRDSCR3 */
out_be32(&priv->regs->srdscr3, 0);
/* Configure SRDSCR4 */
out_be32(&priv->regs->srdscr4, priv->rfcks | SRDSCR4_PROT_SGMII);
}
static int mpc83xx_serdes_probe(struct udevice *dev)
{
struct mpc83xx_serdes_priv *priv = dev_get_priv(dev);
bool vdd;
const char *proto;
priv->regs = map_sysmem(dev_read_addr(dev),
sizeof(struct mpc83xx_serdes_regs));
switch (dev_read_u32_default(dev, "serdes-clk", -1)) {
case 100:
priv->rfcks = SRDSCR4_RFCKS_100;
break;
case 125:
priv->rfcks = SRDSCR4_RFCKS_125;
break;
case 150:
priv->rfcks = SRDSCR4_RFCKS_150;
break;
default:
debug("%s: Could not read serdes clock value\n", dev->name);
return -EINVAL;
}
vdd = dev_read_bool(dev, "vdd");
/* 1.0V corevdd */
if (vdd) {
/* DPPE/DPPA = 0 */
clrbits_be32(&priv->regs->srdscr0, SRDSCR0_DPP_1V2);
/* VDD = 0 */
clrbits_be32(&priv->regs->srdscr0, SRDSCR2_VDD_1V2);
}
proto = dev_read_string(dev, "proto");
/* protocol specific configuration */
if (!strcmp(proto, "sata")) {
setup_sata(dev);
} else if (!strcmp(proto, "pex")) {
setup_pex(dev, PEX_X1);
} else if (!strcmp(proto, "pex-x2")) {
setup_pex(dev, PEX_X2);
} else if (!strcmp(proto, "sgmii")) {
setup_sgmii(dev);
} else {
debug("%s: Invalid protocol value %s\n", dev->name, proto);
return -EINVAL;
}
/* Do a software reset */
setbits_be32(&priv->regs->srdsrstctl, SRDSRSTCTL_RST);
return 0;
}
static const struct udevice_id mpc83xx_serdes_ids[] = {
{ .compatible = "fsl,mpc83xx-serdes" },
{ }
};
U_BOOT_DRIVER(mpc83xx_serdes) = {
.name = "mpc83xx_serdes",
.id = UCLASS_MISC,
.of_match = mpc83xx_serdes_ids,
.probe = mpc83xx_serdes_probe,
.priv_auto_alloc_size = sizeof(struct mpc83xx_serdes_priv),
};

@ -0,0 +1,232 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (C) Copyright 2018
* Mario Six, Guntermann & Drunck GmbH, mario.six@gdsys.cc
*/
/**
* enum srdscr0_mask - Bit masks for SRDSCR0 (SerDes Control Register 0)
* @SRDSCR0_DPPA: Bitmask for the DPPA (diff pk-pk swing for lane A)
* field of the SRCSCR0
* @SRDSCR0_DPPE: Bitmask for the DPPE (diff pk-pk swing for lane E)
* field of the SRCSCR0
* @SRDSCR0_DPP_1V2: Combined bitmask to set diff pk-pk swing for both lanes
* @SRDSCR0_TXEQA_MASK: Bitmask for the TXEQA (transmit equalization for
* lane A) field of the SRCSCR0
* @SRDSCR0_TXEQA_SATA: Bitmask to set the TXEQA to the value used for SATA
* @SRDSCR0_TXEQE_MASK: Bitmask for the TXEQE (transmit equalization for
* lane E) field of the SRCSCR0
* @SRDSCR0_TXEQE_SATA: Bitmask to set the TXEQE to the value used for SATA
*/
enum srdscr0_mask {
SRDSCR0_DPPA = BIT(31 - 16),
SRDSCR0_DPPE = BIT(31 - 20),
SRDSCR0_DPP_1V2 = SRDSCR0_DPPE | SRDSCR0_DPPA,
SRDSCR0_TXEQA_MASK = 0x00007000,
SRDSCR0_TXEQA_SATA = 0x00001000,
SRDSCR0_TXEQE_MASK = 0x00000700,
SRDSCR0_TXEQE_SATA = 0x00000100,
};
/**
* enum srdscr1_mask - Bit masks for SRDSCR1 (SerDes Control Register 1)
* @SRDSCR1_PLLBW: Bitmask for the PLLBW (PLL bandwidth) field of SRDSCR1
*/
enum srdscr1_mask {
SRDSCR1_PLLBW = BIT(31 - 25),
};
/**
* enum srdscr2_mask - Bit masks for SRDSCR2 (SerDes Control Register 2)
* @SRDSCR2_VDD_1V2: Bit mask to to set the VDD field of the SCRSCR2
* @SRDSCR2_SEICA_MASK: Bitmask for the SEICA (Receiver electrical idle
* detection control for lane A) field of the SRCSCR2
* @SRDSCR2_SEICE_MASK: Bitmask for the SEICE (Receiver electrical idle
* detection control for lane E) field of the SRCSCR2
* @SRDSCR2_SEIC_MASK: Combined bitmask to set the receiver electrical idle
* detection control for both lanes
* @SRDSCR2_SEICA_SATA: Bitmask to set the SEICA field to the value used for
* SATA
* @SRDSCR2_SEICE_SATA: Bitmask to set the SEICE field to the value used for
* SATA
* @SRDSCR2_SEIC_SATA: Combined bitmask to set the value of both SEIC fields
* to the value used for SATA
* @SRDSCR2_SEICA_PEX: Bitmask to set the SEICA field to the value used for
* PCI Express
* @SRDSCR2_SEICE_PEX: Bitmask to set the SEICE field to the value used for
* PCI Express
* @SRDSCR2_SEIC_PEX: Combined bitmask to set the value of both SEIC fields
* to the value used for PCI Express
* @SRDSCR2_SEICA_SGMII: Bitmask to set the SEICA field to the value used for
* SGMII
* @SRDSCR2_SEICE_SGMII: Bitmask to set the SEICE field to the value used for
* SGMII
* @SRDSCR2_SEIC_SGMII: Combined bitmask to set the value of both SEIC fields
* to the value used for SGMII
*/
enum srdscr2_mask {
SRDSCR2_VDD_1V2 = 0x00800000,
SRDSCR2_SEICA_MASK = 0x00001c00,
SRDSCR2_SEICE_MASK = 0x0000001c,
SRDSCR2_SEIC_MASK = SRDSCR2_SEICA_MASK | SRDSCR2_SEICE_MASK,
SRDSCR2_SEICA_SATA = 0x00001400,
SRDSCR2_SEICE_SATA = 0x00000014,
SRDSCR2_SEIC_SATA = SRDSCR2_SEICA_SATA | SRDSCR2_SEICE_SATA,
SRDSCR2_SEICA_PEX = 0x00001000,
SRDSCR2_SEICE_PEX = 0x00000010,
SRDSCR2_SEIC_PEX = SRDSCR2_SEICA_PEX | SRDSCR2_SEICE_PEX,
SRDSCR2_SEICA_SGMII = 0x00000100,
SRDSCR2_SEICE_SGMII = 0x00000001,
SRDSCR2_SEIC_SGMII = SRDSCR2_SEICA_SGMII | SRDSCR2_SEICE_SGMII,
};
/**
* enum srdscr3_mask - Bit masks for SRDSCR3 (SerDes Control Register 3)
* @SRDSCR3_KFRA_SATA: Bitmask to set the KFRA field of SRDSCR3 to the
* value used by SATA
* @SRDSCR3_KFRE_SATA: Bitmask to set the KFRE field of SRDSCR3 to the
* value used by SATA
* @SRDSCR3_KFR_SATA: Combined bitmask to set both KFR fields to the
* value used by SATA
* @SRDSCR3_KPHA_SATA: Bitmask to set the KPHA field of SRDSCR3 to the
* value used by SATA
* @SRDSCR3_KPHE_SATA: Bitmask to set the KPHE field of SRDSCR3 to the
* value used by SATA
* @SRDSCR3_KPH_SATA: Combined bitmask to set both KPH fields to the
* value used by SATA
* @SRDSCR3_SDFMA_SATA_PEX: Bitmask to set the SDFMA field of SRDSCR3 to the
* value used by SATA and PCI Express
* @SRDSCR3_SDFME_SATA_PEX: Bitmask to set the SDFME field of SRDSCR3 to the
* value used by SATA and PCI Express
* @SRDSCR3_SDFM_SATA_PEX: Combined bitmask to set both SDFM fields to the
* value used by SATA and PCI Express
* @SRDSCR3_SDTXLA_SATA: Bitmask to set the SDTXLA field of SRDSCR3 to the
* value used by SATA
* @SRDSCR3_SDTXLE_SATA: Bitmask to set the SDTXLE field of SRDSCR3 to the
* value used by SATA
* @SRDSCR3_SDTXL_SATA: Combined bitmask to set both SDTXL fields to the
* value used by SATA
*
* KFRA = 'Kfr' gain selection in the CDR for lane A
* KFRE = 'Kfr' gain selection in the CDR for lane E
* SDFMA = Bandwidth of digital filter for lane A
* SDFME = Bandwidth of digital filter for lane E
* SDTXLA = Lane A transmitter amplitude levels
* SDTXLE = Lane E transmitter amplitude levels
*/
enum srdscr3_mask {
SRDSCR3_KFRA_SATA = 0x10000000,
SRDSCR3_KFRE_SATA = 0x00100000,
SRDSCR3_KFR_SATA = SRDSCR3_KFRA_SATA | SRDSCR3_KFRE_SATA,
SRDSCR3_KPHA_SATA = 0x04000000,
SRDSCR3_KPHE_SATA = 0x00040000,
SRDSCR3_KPH_SATA = SRDSCR3_KPHA_SATA | SRDSCR3_KPHE_SATA,
SRDSCR3_SDFMA_SATA_PEX = 0x01000000,
SRDSCR3_SDFME_SATA_PEX = 0x00010000,
SRDSCR3_SDFM_SATA_PEX = SRDSCR3_SDFMA_SATA_PEX | SRDSCR3_SDFME_SATA_PEX,
SRDSCR3_SDTXLA_SATA = 0x00000500,
SRDSCR3_SDTXLE_SATA = 0x00000005,
SRDSCR3_SDTXL_SATA = SRDSCR3_SDTXLA_SATA | SRDSCR3_SDTXLE_SATA,
};
/**
* enum srdscr4_mask - Bit masks for SRDSCR4 (SerDes Control Register 4)
* @SRDSCR4_PROTA_SATA: Bitmask to set the PROTA field of SRDSCR4 to the
* value used by SATA
* @SRDSCR4_PROTE_SATA: Bitmask to set the PROTE field of SRDSCR4 to the
* value used by SATA
* @SRDSCR4_PROT_SATA: Combined bitmask to set both PROT fields to the
* value used by SATA
* @SRDSCR4_PROTA_PEX: Bitmask to set the PROTA field of SRDSCR4 to the
* value used by PCI Express
* @SRDSCR4_PROTE_PEX: Bitmask to set the PROTE field of SRDSCR4 to the
* value used by PCI Express
* @SRDSCR4_PROT_PEX: Combined bitmask to set both PROT fields to the
* value used by PCI Express
* @SRDSCR4_PROTA_SGMII: Bitmask to set the PROTA field of SRDSCR4 to the
* value used by SGMII
* @SRDSCR4_PROTE_SGMII: Bitmask to set the PROTE field of SRDSCR4 to the
* value used by SGMII
* @SRDSCR4_PROT_SGMII: Combined bitmask to set both PROT fields to the
* value used by SGMII
* @SRDSCR4_PLANE_X2: Bitmask to set the PLANE field of SRDSCR4
* @SRDSCR4_RFCKS_100: Bitmask to set the RFCKS field of SRDSCR4 to the
* value 100Mhz
* @SRDSCR4_RFCKS_125: Bitmask to set the RFCKS field of SRDSCR4 to the
* value 125Mhz
* @SRDSCR4_RFCKS_150: Bitmask to set the RFCKS field of SRDSCR4 to the
* value 150Mhz
*
* PROTA = Lane A protocol select
* PROTE = Lane E protocol select
* PLAME = Number of PCI Express lanes
*/
enum srdscr4_mask {
SRDSCR4_PROTA_SATA = 0x00000800,
SRDSCR4_PROTE_SATA = 0x00000008,
SRDSCR4_PROT_SATA = SRDSCR4_PROTA_SATA | SRDSCR4_PROTE_SATA,
SRDSCR4_PROTA_PEX = 0x00000100,
SRDSCR4_PROTE_PEX = 0x00000001,
SRDSCR4_PROT_PEX = SRDSCR4_PROTA_PEX | SRDSCR4_PROTE_PEX,
SRDSCR4_PROTA_SGMII = 0x00000500,
SRDSCR4_PROTE_SGMII = 0x00000005,
SRDSCR4_PROT_SGMII = SRDSCR4_PROTA_SGMII | SRDSCR4_PROTE_SGMII,
SRDSCR4_PLANE_X2 = 0x01000000,
SRDSCR4_RFCKS_100 = (0 << 28),
SRDSCR4_RFCKS_125 = (1 << 28),
SRDSCR4_RFCKS_150 = (3 << 28),
};
/**
* enum srdsrstctl_mask - Bit masks for SRDSRSTCTL (SerDes Reset Control Register)
* @SRDSRSTCTL_RST: Bitmask for the RST (Software reset) field of the
* SRDSRSTCTL
* @SRDSRSTCTL_SATA_RESET: Bitmask for the SATA_RESET (SATA reset) field of the
* SRDSRSTCTL
*/
enum srdsrstctl_mask {
SRDSRSTCTL_RST = 0x80000000,
SRDSRSTCTL_SATA_RESET = 0xf,
};
/**
* struct mpc83xx_serdes_regs - Register map of the SerDes controller
* @srdscr0: SerDes Control Register 0
* @srdscr1: SerDes Control Register 1
* @srdscr2: SerDes Control Register 2
* @srdscr3: SerDes Control Register 3
* @srdscr4: SerDes Control Register 4
* @fill0: Reserved space in the register map
* @srdsrstctl: SerDes Reset Control Register
*/
struct mpc83xx_serdes_regs {
u32 srdscr0;
u32 srdscr1;
u32 srdscr2;
u32 srdscr3;
u32 srdscr4;
u8 fill0[12];
u32 srdsrstctl;
};
/**
* enum pex_type - Types of PCI Express
* @PEX_X1: PCI Express in x1 mode
* @PEX_X2: PCI Express in x2 mode
*/
enum pex_type {
PEX_X1,
PEX_X2,
};
Loading…
Cancel
Save