parent
dbe7bb0d21
commit
d526330479
@ -1,12 +0,0 @@ |
|||||||
if TARGET_PMC405 |
|
||||||
|
|
||||||
config SYS_BOARD |
|
||||||
default "pmc405" |
|
||||||
|
|
||||||
config SYS_VENDOR |
|
||||||
default "esd" |
|
||||||
|
|
||||||
config SYS_CONFIG_NAME |
|
||||||
default "PMC405" |
|
||||||
|
|
||||||
endif |
|
@ -1,6 +0,0 @@ |
|||||||
PMC405 BOARD |
|
||||||
M: Matthias Fuchs <matthias.fuchs@esd-electronics.com> |
|
||||||
S: Maintained |
|
||||||
F: board/esd/pmc405/ |
|
||||||
F: include/configs/PMC405.h |
|
||||||
F: configs/PMC405_defconfig |
|
@ -1,13 +0,0 @@ |
|||||||
#
|
|
||||||
# (C) Copyright 2000-2006
|
|
||||||
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
||||||
#
|
|
||||||
# SPDX-License-Identifier: GPL-2.0+
|
|
||||||
#
|
|
||||||
|
|
||||||
# Objects for Xilinx JTAG programming (CPLD)
|
|
||||||
CPLD = ../common/xilinx_jtag/lenval.o \
|
|
||||||
../common/xilinx_jtag/micro.o \
|
|
||||||
../common/xilinx_jtag/ports.o
|
|
||||||
|
|
||||||
obj-y = pmc405.o ../common/misc.o ../common/cmd_loadpci.o $(CPLD)
|
|
@ -1,142 +0,0 @@ |
|||||||
/*
|
|
||||||
* (C) Copyright 2001-2003 |
|
||||||
* Stefan Roese, DENX Software Engineering, sr@denx.de. |
|
||||||
* |
|
||||||
* (C) Copyright 2005-2009 |
|
||||||
* Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd-electronics.com |
|
||||||
* |
|
||||||
* SPDX-License-Identifier: GPL-2.0+ |
|
||||||
*/ |
|
||||||
|
|
||||||
#include <common.h> |
|
||||||
#include <asm/processor.h> |
|
||||||
#include <asm/io.h> |
|
||||||
#include <command.h> |
|
||||||
#include <malloc.h> |
|
||||||
|
|
||||||
DECLARE_GLOBAL_DATA_PTR; |
|
||||||
|
|
||||||
extern void lxt971_no_sleep(void); |
|
||||||
|
|
||||||
int board_early_init_f (void) |
|
||||||
{ |
|
||||||
/*
|
|
||||||
* IRQ 0-15 405GP internally generated; active high; level sensitive |
|
||||||
* IRQ 16 405GP internally generated; active low; level sensitive |
|
||||||
* IRQ 17-24 RESERVED |
|
||||||
* IRQ 25 (EXT IRQ 0) CAN0; active low; level sensitive |
|
||||||
* IRQ 26 (EXT IRQ 1) SER0 ; active low; level sensitive |
|
||||||
* IRQ 27 (EXT IRQ 2) SER1; active low; level sensitive |
|
||||||
* IRQ 28 (EXT IRQ 3) FPGA 0; active low; level sensitive |
|
||||||
* IRQ 29 (EXT IRQ 4) FPGA 1; active low; level sensitive |
|
||||||
* IRQ 30 (EXT IRQ 5) PCI INTA; active low; level sensitive |
|
||||||
* IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive |
|
||||||
*/ |
|
||||||
mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ |
|
||||||
mtdcr(UIC0ER, 0x00000000); /* disable all ints */ |
|
||||||
mtdcr(UIC0CR, 0x00000000); /* set all to be non-critical*/ |
|
||||||
mtdcr(UIC0PR, 0xFFFFFF81); /* set int polarities */ |
|
||||||
mtdcr(UIC0TR, 0x10000000); /* set int trigger levels */ |
|
||||||
mtdcr(UIC0VCR, 0x00000001); /* set vect base=0, INT0 highest priority */ |
|
||||||
mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ |
|
||||||
|
|
||||||
/*
|
|
||||||
* EBC Configuration Register: |
|
||||||
* set ready timeout to 512 ebc-clks -> ca. 15 us |
|
||||||
*/ |
|
||||||
mtebc (EBC0_CFG, 0xa8400000); |
|
||||||
|
|
||||||
/*
|
|
||||||
* Setup GPIO pins |
|
||||||
*/ |
|
||||||
mtdcr(CPC0_CR0, mfdcr(CPC0_CR0) | ((CONFIG_SYS_FPGA_INIT | |
|
||||||
CONFIG_SYS_FPGA_DONE | |
|
||||||
CONFIG_SYS_XEREADY | |
|
||||||
CONFIG_SYS_NONMONARCH | |
|
||||||
CONFIG_SYS_REV1_2) << 5)); |
|
||||||
|
|
||||||
if (!(in_be32((void *)GPIO0_IR) & CONFIG_SYS_REV1_2)) { |
|
||||||
/* rev 1.2 boards */ |
|
||||||
mtdcr(CPC0_CR0, mfdcr(CPC0_CR0) | ((CONFIG_SYS_INTA_FAKE | |
|
||||||
CONFIG_SYS_SELF_RST) << 5)); |
|
||||||
} |
|
||||||
|
|
||||||
out_be32((void *)GPIO0_OR, CONFIG_SYS_VPEN); |
|
||||||
/* setup for output */ |
|
||||||
out_be32((void *)GPIO0_TCR, CONFIG_SYS_FPGA_PRG | CONFIG_SYS_FPGA_CLK | |
|
||||||
CONFIG_SYS_FPGA_DATA | CONFIG_SYS_XEREADY | CONFIG_SYS_VPEN); |
|
||||||
|
|
||||||
/*
|
|
||||||
* - check if rev1_2 is low, then: |
|
||||||
* - set/reset CONFIG_SYS_INTA_FAKE/CONFIG_SYS_SELF_RST |
|
||||||
* in TCR to assert INTA# or SELFRST# |
|
||||||
*/ |
|
||||||
return 0; |
|
||||||
} |
|
||||||
|
|
||||||
int misc_init_r (void) |
|
||||||
{ |
|
||||||
/* adjust flash start and offset */ |
|
||||||
gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize; |
|
||||||
gd->bd->bi_flashoffset = 0; |
|
||||||
|
|
||||||
/* deassert EREADY# */ |
|
||||||
out_be32((void *)GPIO0_OR, |
|
||||||
in_be32((void *)GPIO0_OR) | CONFIG_SYS_XEREADY); |
|
||||||
return (0); |
|
||||||
} |
|
||||||
|
|
||||||
ushort pmc405_pci_subsys_deviceid(void) |
|
||||||
{ |
|
||||||
ulong val; |
|
||||||
|
|
||||||
val = in_be32((void *)GPIO0_IR); |
|
||||||
if (!(val & CONFIG_SYS_REV1_2)) { /* low=rev1.2 */ |
|
||||||
/* check monarch# signal */ |
|
||||||
if (val & CONFIG_SYS_NONMONARCH) |
|
||||||
return CONFIG_SYS_PCI_SUBSYS_DEVICEID_NONMONARCH; |
|
||||||
return CONFIG_SYS_PCI_SUBSYS_DEVICEID_MONARCH; |
|
||||||
} |
|
||||||
return CONFIG_SYS_PCI_SUBSYS_DEVICEID_NONMONARCH; |
|
||||||
} |
|
||||||
|
|
||||||
/*
|
|
||||||
* Check Board Identity |
|
||||||
*/ |
|
||||||
int checkboard (void) |
|
||||||
{ |
|
||||||
ulong val; |
|
||||||
char str[64]; |
|
||||||
int i = getenv_f("serial#", str, sizeof(str)); |
|
||||||
|
|
||||||
puts ("Board: "); |
|
||||||
|
|
||||||
if (i == -1) |
|
||||||
puts ("### No HW ID - assuming PMC405"); |
|
||||||
else |
|
||||||
puts(str); |
|
||||||
|
|
||||||
val = in_be32((void *)GPIO0_IR); |
|
||||||
if (!(val & CONFIG_SYS_REV1_2)) { /* low=rev1.2 */ |
|
||||||
puts(" rev1.2 ("); |
|
||||||
if (val & CONFIG_SYS_NONMONARCH) /* monarch# signal */ |
|
||||||
puts("non-"); |
|
||||||
puts("monarch)"); |
|
||||||
} else |
|
||||||
puts(" <=rev1.1"); |
|
||||||
|
|
||||||
putc ('\n'); |
|
||||||
|
|
||||||
return 0; |
|
||||||
} |
|
||||||
|
|
||||||
void reset_phy(void) |
|
||||||
{ |
|
||||||
#ifdef CONFIG_LXT971_NO_SLEEP |
|
||||||
|
|
||||||
/*
|
|
||||||
* Disable sleep mode in LXT971 |
|
||||||
*/ |
|
||||||
lxt971_no_sleep(); |
|
||||||
#endif |
|
||||||
} |
|
@ -1,3 +0,0 @@ |
|||||||
CONFIG_PPC=y |
|
||||||
CONFIG_4xx=y |
|
||||||
CONFIG_TARGET_PMC405=y |
|
@ -1,318 +0,0 @@ |
|||||||
/*
|
|
||||||
* (C) Copyright 2001-2004 |
|
||||||
* Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com |
|
||||||
* |
|
||||||
* SPDX-License-Identifier: GPL-2.0+ |
|
||||||
*/ |
|
||||||
|
|
||||||
#ifndef __CONFIG_H |
|
||||||
#define __CONFIG_H |
|
||||||
|
|
||||||
/*
|
|
||||||
* High Level Configuration Options |
|
||||||
*/ |
|
||||||
|
|
||||||
#define CONFIG_405GP 1 /* This is a PPC405 CPU */ |
|
||||||
#define CONFIG_PMC405 1 /* ...on a PMC405 board */ |
|
||||||
|
|
||||||
#define CONFIG_SYS_TEXT_BASE 0xFFF80000 |
|
||||||
|
|
||||||
#define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */ |
|
||||||
#define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */ |
|
||||||
|
|
||||||
#define CONFIG_SYS_CLK_FREQ 33330000 /* external frequency to pll */ |
|
||||||
|
|
||||||
#define CONFIG_BAUDRATE 9600 |
|
||||||
#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */ |
|
||||||
|
|
||||||
/* Only interrupt boot if space is pressed. */ |
|
||||||
#define CONFIG_AUTOBOOT_KEYED 1 |
|
||||||
#define CONFIG_AUTOBOOT_PROMPT \ |
|
||||||
"Press SPACE to abort autoboot in %d seconds\n", bootdelay |
|
||||||
#undef CONFIG_AUTOBOOT_DELAY_STR |
|
||||||
#define CONFIG_AUTOBOOT_STOP_STR " " |
|
||||||
|
|
||||||
#undef CONFIG_BOOTARGS |
|
||||||
#undef CONFIG_BOOTCOMMAND |
|
||||||
|
|
||||||
#define CONFIG_PREBOOT /* enable preboot variable */ |
|
||||||
|
|
||||||
#define CFG_BOOTM_LEN 0x1000000 /* support booting of huge images */ |
|
||||||
|
|
||||||
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ |
|
||||||
#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ |
|
||||||
|
|
||||||
#undef CONFIG_HAS_ETH1 |
|
||||||
|
|
||||||
#define CONFIG_PPC4xx_EMAC |
|
||||||
#define CONFIG_MII 1 /* MII PHY management */ |
|
||||||
#define CONFIG_PHY_ADDR 0 /* PHY address */ |
|
||||||
#define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */ |
|
||||||
#define CONFIG_RESET_PHY_R 1 /* use reset_phy() */ |
|
||||||
|
|
||||||
/*
|
|
||||||
* BOOTP options |
|
||||||
*/ |
|
||||||
#define CONFIG_BOOTP_BOOTFILESIZE |
|
||||||
#define CONFIG_BOOTP_BOOTPATH |
|
||||||
#define CONFIG_BOOTP_GATEWAY |
|
||||||
#define CONFIG_BOOTP_HOSTNAME |
|
||||||
|
|
||||||
/*
|
|
||||||
* Command line configuration. |
|
||||||
*/ |
|
||||||
#include <config_cmd_default.h> |
|
||||||
|
|
||||||
#define CONFIG_CMD_BSP |
|
||||||
#define CONFIG_CMD_PCI |
|
||||||
#define CONFIG_CMD_IRQ |
|
||||||
#define CONFIG_CMD_ELF |
|
||||||
#define CONFIG_CMD_DATE |
|
||||||
#define CONFIG_CMD_JFFS2 |
|
||||||
#define CONFIG_CMD_MII |
|
||||||
#define CONFIG_CMD_I2C |
|
||||||
#define CONFIG_CMD_PING |
|
||||||
#define CONFIG_CMD_UNIVERSE |
|
||||||
#define CONFIG_CMD_EEPROM |
|
||||||
|
|
||||||
#define CONFIG_MAC_PARTITION |
|
||||||
#define CONFIG_DOS_PARTITION |
|
||||||
|
|
||||||
#undef CONFIG_WATCHDOG /* watchdog disabled */ |
|
||||||
|
|
||||||
#define CONFIG_RTC_MC146818 /* DS1685 is MC146818 compatible */ |
|
||||||
#define CONFIG_SYS_RTC_REG_BASE_ADDR 0xF0000500 /* RTC Base Address */ |
|
||||||
|
|
||||||
#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */ |
|
||||||
|
|
||||||
/*
|
|
||||||
* Miscellaneous configurable options |
|
||||||
*/ |
|
||||||
#define CONFIG_SYS_LONGHELP /* undef to save memory */ |
|
||||||
|
|
||||||
#undef CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ |
|
||||||
|
|
||||||
#if defined(CONFIG_CMD_KGDB) |
|
||||||
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ |
|
||||||
#else |
|
||||||
#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ |
|
||||||
#endif |
|
||||||
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) |
|
||||||
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ |
|
||||||
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Sz */ |
|
||||||
|
|
||||||
#define CONFIG_SYS_DEVICE_NULLDEV 1 /* include nulldev device */ |
|
||||||
|
|
||||||
#define CONFIG_SYS_CONSOLE_INFO_QUIET 1 /* don't print console info */ |
|
||||||
|
|
||||||
#define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */ |
|
||||||
|
|
||||||
#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ |
|
||||||
#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ |
|
||||||
|
|
||||||
#define CONFIG_CONS_INDEX 1 /* Use UART0 */ |
|
||||||
#define CONFIG_SYS_NS16550 |
|
||||||
#define CONFIG_SYS_NS16550_SERIAL |
|
||||||
#define CONFIG_SYS_NS16550_REG_SIZE 1 |
|
||||||
#define CONFIG_SYS_NS16550_CLK get_serial_clock() |
|
||||||
|
|
||||||
#undef CONFIG_SYS_EXT_SERIAL_CLOCK /* no external serial clock */ |
|
||||||
#define CONFIG_SYS_BASE_BAUD 806400 |
|
||||||
|
|
||||||
/* The following table includes the supported baudrates */ |
|
||||||
#define CONFIG_SYS_BAUDRATE_TABLE \ |
|
||||||
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} |
|
||||||
|
|
||||||
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ |
|
||||||
#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */ |
|
||||||
|
|
||||||
#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ |
|
||||||
#define CONFIG_LOOPW 1 /* enable loopw command */ |
|
||||||
|
|
||||||
#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ |
|
||||||
|
|
||||||
#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ |
|
||||||
|
|
||||||
#define CONFIG_SYS_RX_ETH_BUFFER 16 |
|
||||||
|
|
||||||
/*
|
|
||||||
* PCI stuff |
|
||||||
*/ |
|
||||||
#define PCI_HOST_ADAPTER 0 /* configure as pci adapter */ |
|
||||||
#define PCI_HOST_FORCE 1 /* configure as pci host */ |
|
||||||
#define PCI_HOST_AUTO 2 /* detected via arbiter enable */ |
|
||||||
|
|
||||||
#define CONFIG_PCI /* include pci support */ |
|
||||||
#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ |
|
||||||
#define CONFIG_PCI_HOST PCI_HOST_AUTO /* select pci host function */ |
|
||||||
#define CONFIG_PCI_PNP /* do pci plug-and-play */ |
|
||||||
/* resource configuration */ |
|
||||||
|
|
||||||
#define CONFIG_PCI_SCAN_SHOW /* print pci devices @ startup */ |
|
||||||
|
|
||||||
#define CONFIG_PCI_CONFIG_HOST_BRIDGE 1 /* don't skip host bridge config */ |
|
||||||
|
|
||||||
#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x12FE /* PCI Vendor ID: esd gmbh */ |
|
||||||
#define CONFIG_SYS_PCI_SUBSYS_DEVICEID_NONMONARCH 0x0408 /* PCI Device ID */ |
|
||||||
#define CONFIG_SYS_PCI_SUBSYS_DEVICEID_MONARCH 0x0409 /* PCI Device ID */ |
|
||||||
#define CONFIG_SYS_PCI_SUBSYS_DEVICEID pmc405_pci_subsys_deviceid() |
|
||||||
|
|
||||||
#define CONFIG_SYS_PCI_CLASSCODE 0x0b20 /* Processor/PPC */ |
|
||||||
|
|
||||||
#define CONFIG_SYS_PCI_PTM1LA (bd->bi_memstart) /* point to sdram */ |
|
||||||
#define CONFIG_SYS_PCI_PTM1MS (~(bd->bi_memsize - 1) | 1) /* memsize, enable */ |
|
||||||
#define CONFIG_SYS_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */ |
|
||||||
#define CONFIG_SYS_PCI_PTM2LA 0xef000000 /* point to internal regs */ |
|
||||||
#define CONFIG_SYS_PCI_PTM2MS 0xff000001 /* 16MB, enable */ |
|
||||||
#define CONFIG_SYS_PCI_PTM2PCI 0x00000000 /* Host: use this pci address */ |
|
||||||
|
|
||||||
#define CONFIG_PCI_4xx_PTM_OVERWRITE 1 /* overwrite PTMx settings by env */ |
|
||||||
|
|
||||||
/*
|
|
||||||
* Start addresses for the final memory configuration |
|
||||||
* (Set up by the startup code) |
|
||||||
* Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 |
|
||||||
*/ |
|
||||||
#define CONFIG_SYS_SDRAM_BASE 0x00000000 |
|
||||||
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE |
|
||||||
#define CONFIG_SYS_MONITOR_LEN (~(CONFIG_SYS_TEXT_BASE) + 1) |
|
||||||
#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* 128 kB for malloc() */ |
|
||||||
|
|
||||||
#define CONFIG_PRAM 0 /* use pram variable to overwrite */ |
|
||||||
|
|
||||||
/*
|
|
||||||
* For booting Linux, the board info and command line data |
|
||||||
* have to be in the first 8 MB of memory, since this is |
|
||||||
* the maximum mapped by the Linux kernel during initialization. |
|
||||||
*/ |
|
||||||
#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ |
|
||||||
|
|
||||||
/*
|
|
||||||
* FLASH organization |
|
||||||
*/ |
|
||||||
#define CONFIG_SYS_FLASH_BASE 0xFE000000 |
|
||||||
#define CONFIG_SYS_FLASH_INCREMENT 0x01000000 |
|
||||||
|
|
||||||
#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */ |
|
||||||
#define CONFIG_FLASH_CFI_DRIVER 1 /* Use the common driver */ |
|
||||||
#define CONFIG_SYS_FLASH_PROTECTION 1 /* don't use hardware protection */ |
|
||||||
#define CONFIG_SYS_FLASH_AUTOPROTECT_LIST {{0xfff80000, 0x80000}} |
|
||||||
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (faster) */ |
|
||||||
#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max num of flash banks */ |
|
||||||
#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE, \ |
|
||||||
CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_INCREMENT} |
|
||||||
#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max num of sects on one chip */ |
|
||||||
#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on fli */ |
|
||||||
|
|
||||||
/*
|
|
||||||
* Environment Variable setup |
|
||||||
*/ |
|
||||||
#define CONFIG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */ |
|
||||||
|
|
||||||
/* environment starts at the beginning of the EEPROM */ |
|
||||||
#define CONFIG_ENV_OFFSET 0x000 |
|
||||||
#define CONFIG_ENV_SIZE 0x800 /* 2048 bytes may be used for env vars */ |
|
||||||
|
|
||||||
#define CONFIG_SYS_NVRAM_BASE_ADDR 0xF0000500 /* NVRAM base address */ |
|
||||||
#define CONFIG_SYS_NVRAM_SIZE 242 /* NVRAM size */ |
|
||||||
|
|
||||||
/*
|
|
||||||
* I2C EEPROM (CAT24WC16) for environment |
|
||||||
*/ |
|
||||||
#define CONFIG_SYS_I2C |
|
||||||
#define CONFIG_SYS_I2C_PPC4XX |
|
||||||
#define CONFIG_SYS_I2C_PPC4XX_CH0 |
|
||||||
#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 100000 |
|
||||||
#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F |
|
||||||
|
|
||||||
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT24W16 */ |
|
||||||
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ |
|
||||||
/* mask of address bits that overflow into the "EEPROM chip address" */ |
|
||||||
#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 0x07 |
|
||||||
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 /* The Catalyst CAT24W16 has */ |
|
||||||
/* 16 byte page write mode using*/ |
|
||||||
/* last 4 bits of the address */ |
|
||||||
|
|
||||||
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */ |
|
||||||
|
|
||||||
/*
|
|
||||||
* External Bus Controller (EBC) Setup |
|
||||||
*/ |
|
||||||
#define FLASH0_BA 0xFF000000 /* FLASH 0 Base Address */ |
|
||||||
#define FLASH1_BA 0xFE000000 /* FLASH 1 Base Address */ |
|
||||||
#define CAN_BA 0xF0000000 /* CAN Base Addres */ |
|
||||||
#define RTC_BA 0xF0000500 /* RTC Base Address */ |
|
||||||
#define NVRAM_BA 0xF0200000 /* NVRAM Base Address */ |
|
||||||
|
|
||||||
/* Memory Bank 0 (Flash Bank 0) initialization */ |
|
||||||
#define CONFIG_SYS_EBC_PB0AP 0x92015480 |
|
||||||
/* BAS=0xFF0,BS=16MB,BU=R/W,BW=16bit */ |
|
||||||
#define CONFIG_SYS_EBC_PB0CR (FLASH0_BA | 0x9A000) |
|
||||||
|
|
||||||
/* Memory Bank 1 (Flash Bank 1) initialization */ |
|
||||||
#define CONFIG_SYS_EBC_PB1AP 0x92015480 |
|
||||||
/* BAS=0xFE0,BS=16MB,BU=R/W,BW=16bit*/ |
|
||||||
#define CONFIG_SYS_EBC_PB1CR (FLASH1_BA | 0x9A000) |
|
||||||
|
|
||||||
/* Memory Bank 2 (CAN0, 1, RTC) initialization */ |
|
||||||
/* TWT=5,TH=2,CSN=0,OEN=0,WBN=0,WBF=0 */ |
|
||||||
#define CONFIG_SYS_EBC_PB2AP 0x03000440 |
|
||||||
/* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit */ |
|
||||||
#define CONFIG_SYS_EBC_PB2CR (CAN_BA | 0x18000) |
|
||||||
|
|
||||||
/* Memory Bank 3 -> unused */ |
|
||||||
|
|
||||||
/* Memory Bank 4 (NVRAM) initialization */ |
|
||||||
/* TWT=5,TH=2,CSN=0,OEN=0,WBN=0,WBF=0 */ |
|
||||||
#define CONFIG_SYS_EBC_PB4AP 0x03000440 |
|
||||||
/* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit */ |
|
||||||
#define CONFIG_SYS_EBC_PB4CR (NVRAM_BA | 0x18000) |
|
||||||
|
|
||||||
/*
|
|
||||||
* FPGA stuff |
|
||||||
*/ |
|
||||||
/* FPGA program pin configuration */ |
|
||||||
#define CONFIG_SYS_FPGA_PRG 0x04000000 /* JTAG TMS pin (output) */ |
|
||||||
#define CONFIG_SYS_FPGA_CLK 0x02000000 /* JTAG TCK pin (output) */ |
|
||||||
#define CONFIG_SYS_FPGA_DATA 0x01000000 /* JTAG TDO pin (output) */ |
|
||||||
#define CONFIG_SYS_FPGA_INIT 0x00010000 /* unused (ppc input) */ |
|
||||||
#define CONFIG_SYS_FPGA_DONE 0x00008000 /* JTAG TDI pin (input) */ |
|
||||||
|
|
||||||
/* pass Ethernet MAC to VxWorks */ |
|
||||||
#define CONFIG_SYS_VXWORKS_MAC_PTR 0x00000000 |
|
||||||
|
|
||||||
/*
|
|
||||||
* GPIOs |
|
||||||
*/ |
|
||||||
#define CONFIG_SYS_VPEN (0x80000000 >> 3) /* GPIO3 */ |
|
||||||
#define CONFIG_SYS_NONMONARCH (0x80000000 >> 14) /* GPIO14 */ |
|
||||||
#define CONFIG_SYS_XEREADY (0x80000000 >> 15) /* GPIO15 */ |
|
||||||
#define CONFIG_SYS_INTA_FAKE (0x80000000 >> 19) /* GPIO19 */ |
|
||||||
#define CONFIG_SYS_SELF_RST (0x80000000 >> 21) /* GPIO21 */ |
|
||||||
#define CONFIG_SYS_REV1_2 (0x80000000 >> 23) /* GPIO23 */ |
|
||||||
|
|
||||||
/*
|
|
||||||
* Definitions for initial stack pointer and data area (in data cache) |
|
||||||
*/ |
|
||||||
|
|
||||||
/* use on chip memory (OCM) for temperary stack until sdram is tested */ |
|
||||||
#define CONFIG_SYS_TEMP_STACK_OCM 1 |
|
||||||
|
|
||||||
/* On Chip Memory location */ |
|
||||||
#define CONFIG_SYS_OCM_DATA_ADDR 0xF8000000 |
|
||||||
#define CONFIG_SYS_OCM_DATA_SIZE 0x1000 |
|
||||||
|
|
||||||
/* inside of SDRAM */ |
|
||||||
#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR |
|
||||||
|
|
||||||
/* End of used area in RAM */ |
|
||||||
#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE |
|
||||||
|
|
||||||
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ |
|
||||||
GENERATED_GBL_DATA_SIZE) |
|
||||||
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET |
|
||||||
|
|
||||||
#define CONFIG_OF_LIBFDT |
|
||||||
#define CONFIG_OF_BOARD_SETUP |
|
||||||
|
|
||||||
#endif /* __CONFIG_H */ |
|
Loading…
Reference in new issue