U-Boot SPL 2016.03-rc3-00019-g6dfb4c2-dirty (Mar 09 2016 - 07:40:06) SHC C3-Sample MPU reference clock runs at 6 MHz Setting MPU clock to 594 MHz Enabling Spread Spectrum of 18 permille for MPU Trying to boot from MMC reading u-boot.img reading u-boot.img U-Boot 2016.03-rc3-00019-g6dfb4c2-dirty (Mar 09 2016 - 07:05:35 +0100) Watchdog enabled I2C: ready DRAM: 512 MiB reloc off 1f783000 MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Net: cpsw U-Boot# Signed-off-by: Heiko Schocher <hs@denx.de>master
parent
3e584b94d2
commit
d8ccbe93b5
@ -0,0 +1,87 @@ |
|||||||
|
if TARGET_AM335X_SHC |
||||||
|
|
||||||
|
config SYS_BOARD |
||||||
|
default "shc" |
||||||
|
|
||||||
|
config SYS_VENDOR |
||||||
|
default "bosch" |
||||||
|
|
||||||
|
config SYS_SOC |
||||||
|
default "am33xx" |
||||||
|
|
||||||
|
config SYS_CONFIG_NAME |
||||||
|
default "am335x_shc" |
||||||
|
|
||||||
|
choice |
||||||
|
prompt "enable different boot versions for the shc board" |
||||||
|
default EMMC |
||||||
|
help |
||||||
|
Select the boot version of the shc board. |
||||||
|
|
||||||
|
config SHC_EMMC |
||||||
|
bool "enable eMMC" |
||||||
|
help |
||||||
|
enable here the eMMC functionality on the bosch shc board. |
||||||
|
|
||||||
|
config SHC_ICT |
||||||
|
bool "enable ICT" |
||||||
|
help |
||||||
|
enable here the ICT functionality on the bosch shc board |
||||||
|
|
||||||
|
config SHC_NETBOOT |
||||||
|
bool "enable NETBOOT" |
||||||
|
help |
||||||
|
enable here the NETBOOT functionality on the bosch shc board |
||||||
|
|
||||||
|
config SHC_SDBOOT |
||||||
|
bool "enable SDBOOT" |
||||||
|
help |
||||||
|
enable here the SDBOOT functionality on the bosch shc board |
||||||
|
|
||||||
|
endchoice |
||||||
|
|
||||||
|
choice |
||||||
|
prompt "enable different board versions for the shc board" |
||||||
|
default C3_SAMPLE |
||||||
|
help |
||||||
|
Select the board version of the shc board. |
||||||
|
|
||||||
|
config B_SAMPLE |
||||||
|
bool "B Sample board version" |
||||||
|
help |
||||||
|
activate, if you want to build for the B sample version |
||||||
|
of the bosch shc board |
||||||
|
|
||||||
|
config B2_SAMPLE |
||||||
|
bool "B2 Sample board version" |
||||||
|
help |
||||||
|
activate, if you want to build for the B2 sample version |
||||||
|
of the bosch shc board |
||||||
|
|
||||||
|
config C_SAMPLE |
||||||
|
bool "C Sample board version" |
||||||
|
help |
||||||
|
activate, if you want to build for the C sample version |
||||||
|
of the bosch shc board |
||||||
|
|
||||||
|
config C2_SAMPLE |
||||||
|
bool "C2 Sample board version" |
||||||
|
help |
||||||
|
activate, if you want to build for the C2 sample version |
||||||
|
of the bosch shc board |
||||||
|
|
||||||
|
config C3_SAMPLE |
||||||
|
bool "C3 Sample board version" |
||||||
|
help |
||||||
|
activate, if you want to build for the C3 sample version |
||||||
|
of the bosch shc board |
||||||
|
|
||||||
|
config SERIES |
||||||
|
bool "Series board version" |
||||||
|
help |
||||||
|
activate, if you want to build for the Series version |
||||||
|
of the bosch shc board |
||||||
|
|
||||||
|
endchoice |
||||||
|
|
||||||
|
endif |
@ -0,0 +1,11 @@ |
|||||||
|
SHC BOARD |
||||||
|
M: Heiko Schocher <hs@denx.de> |
||||||
|
S: Maintained |
||||||
|
F: board/bosch/shc |
||||||
|
F: include/configs/am335x_shc.h |
||||||
|
F: configs/am335x_shc_defconfig |
||||||
|
F: configs/am335x_shc_ict_defconfig |
||||||
|
F: configs/am335x_shc_netboot_defconfig |
||||||
|
F: configs/am335x_shc_prompt_defconfig |
||||||
|
F: configs/am335x_shc_sdboot_defconfig |
||||||
|
F: configs/am335x_shc_sdboot_prompt_defconfig |
@ -0,0 +1,10 @@ |
|||||||
|
#
|
||||||
|
# Makefile
|
||||||
|
#
|
||||||
|
# Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
|
||||||
|
#
|
||||||
|
# SPDX-License-Identifier: GPL-2.0+
|
||||||
|
#
|
||||||
|
|
||||||
|
obj-y := mux.o
|
||||||
|
obj-y += board.o
|
@ -0,0 +1,114 @@ |
|||||||
|
Summary |
||||||
|
======= |
||||||
|
|
||||||
|
This document covers various features of the 'am335x_shc' build. |
||||||
|
|
||||||
|
Hardware |
||||||
|
======== |
||||||
|
|
||||||
|
AM335X based board: |
||||||
|
|
||||||
|
I2C: ready |
||||||
|
DRAM: 512 MiB |
||||||
|
Enabling the D-Cache |
||||||
|
MMC: OMAP SD/MMC: 0 @ 26 MHz, OMAP SD/MMC: 1 @ 26 MHz |
||||||
|
Net: cpsw |
||||||
|
|
||||||
|
Following boot options are possible: |
||||||
|
|
||||||
|
2 Jumpers: |
||||||
|
|
||||||
|
Jumper 1 Jumper 2 Bootmode |
||||||
|
off off eMMC boot |
||||||
|
on off SD boot |
||||||
|
off on Net boot |
||||||
|
|
||||||
|
Compiling |
||||||
|
========= |
||||||
|
|
||||||
|
$ make am335x_shc_defconfig |
||||||
|
HOSTCC scripts/basic/fixdep |
||||||
|
HOSTCC scripts/kconfig/conf.o |
||||||
|
SHIPPED scripts/kconfig/zconf.tab.c |
||||||
|
SHIPPED scripts/kconfig/zconf.lex.c |
||||||
|
SHIPPED scripts/kconfig/zconf.hash.c |
||||||
|
HOSTCC scripts/kconfig/zconf.tab.o |
||||||
|
HOSTLD scripts/kconfig/conf |
||||||
|
# |
||||||
|
# configuration written to .config |
||||||
|
# |
||||||
|
$ make -s all |
||||||
|
|
||||||
|
-> now you have the MLO and the u-boot.img file, you can put |
||||||
|
on your SD card or eMMC. |
||||||
|
|
||||||
|
Configuring |
||||||
|
=========== |
||||||
|
|
||||||
|
There are a lot of board versions and boot configurations, which |
||||||
|
can be selected through "make menuconfig" |
||||||
|
|
||||||
|
ARM architecture ---> |
||||||
|
enable different boot versions for the shc board (enable eMMC) ---> |
||||||
|
(X) enable eMMC |
||||||
|
( ) enable ICT |
||||||
|
( ) enable NETBOOT |
||||||
|
( ) enable SDBOOT |
||||||
|
|
||||||
|
enable different board versions for the shc board (C3 Sample board version) ---> |
||||||
|
( ) B Sample board version |
||||||
|
( ) B2 Sample board version |
||||||
|
( ) C Sample board version |
||||||
|
( ) C2 Sample board version |
||||||
|
(X) C3 Sample board version |
||||||
|
( ) Series board version |
||||||
|
|
||||||
|
Netboot |
||||||
|
======= |
||||||
|
- see also doc/SPL/README.am335x-network |
||||||
|
|
||||||
|
- set the jumper into netboot mode |
||||||
|
- compile the U-boot sources with: |
||||||
|
make am335x_shc_netboot_defconfig |
||||||
|
make all |
||||||
|
- copy the images into your tftp boot directory |
||||||
|
cp spl/u-boot-spl.bin /tftpboot/.../u-boot-spl-restore.bin |
||||||
|
cp u-boot.img /tftpboot/.../u-boot-restore.img |
||||||
|
- power on the board, and you should get something like this: |
||||||
|
|
||||||
|
U-Boot SPL 2016.05-rc2-00016-gf23b960-dirty (Apr 26 2016 - 09:02:18) |
||||||
|
#### NETBOOT #### |
||||||
|
SHC |
||||||
|
MPU reference clock runs at 6 MHz |
||||||
|
Setting MPU clock to 594 MHz |
||||||
|
Enabling Spread Spectrum of 18 permille for MPU |
||||||
|
Trying to boot from net |
||||||
|
Using default environment |
||||||
|
|
||||||
|
<ethaddr> not set. Validating first E-fuse MAC |
||||||
|
cpsw |
||||||
|
cpsw Waiting for PHY auto negotiation to complete... done |
||||||
|
link up on port 0, speed 100, full duplex |
||||||
|
BOOTP broadcast 1 |
||||||
|
BOOTP broadcast 2 |
||||||
|
DHCP client bound to address 192.168.20.91 (258 ms) |
||||||
|
Using cpsw device |
||||||
|
TFTP from server 192.168.1.1; our IP address is 192.168.20.91 |
||||||
|
Filename 'shc/u-boot-restore.img'. |
||||||
|
Load address: 0x807fffc0 |
||||||
|
Loading: ################## |
||||||
|
1.2 MiB/s |
||||||
|
done |
||||||
|
Bytes transferred = 262480 (40150 hex) |
||||||
|
|
||||||
|
|
||||||
|
U-Boot 2016.05-rc2-00016-gf23b960-dirty (Apr 26 2016 - 09:02:18 +0200) |
||||||
|
|
||||||
|
Watchdog enabled |
||||||
|
I2C: ready |
||||||
|
DRAM: 512 MiB |
||||||
|
MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 |
||||||
|
*** Warning - bad CRC, using default environment |
||||||
|
|
||||||
|
Net: cpsw |
||||||
|
switch to partitions #0, OK |
@ -0,0 +1,648 @@ |
|||||||
|
/*
|
||||||
|
* board.c |
||||||
|
* |
||||||
|
* (C) Copyright 2016 |
||||||
|
* Heiko Schocher, DENX Software Engineering, hs@denx.de. |
||||||
|
* |
||||||
|
* Based on: |
||||||
|
* Board functions for TI AM335X based boards |
||||||
|
* |
||||||
|
* Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
|
||||||
|
* |
||||||
|
* SPDX-License-Identifier: GPL-2.0+ |
||||||
|
*/ |
||||||
|
|
||||||
|
#include <common.h> |
||||||
|
#include <errno.h> |
||||||
|
#include <spl.h> |
||||||
|
#include <asm/arch/cpu.h> |
||||||
|
#include <asm/arch/hardware.h> |
||||||
|
#include <asm/arch/omap.h> |
||||||
|
#include <asm/arch/ddr_defs.h> |
||||||
|
#include <asm/arch/clock.h> |
||||||
|
#include <asm/arch/gpio.h> |
||||||
|
#include <asm/arch/mmc_host_def.h> |
||||||
|
#include <asm/arch/sys_proto.h> |
||||||
|
#include <asm/arch/mem.h> |
||||||
|
#include <asm/io.h> |
||||||
|
#include <asm/emif.h> |
||||||
|
#include <asm/gpio.h> |
||||||
|
#include <i2c.h> |
||||||
|
#include <miiphy.h> |
||||||
|
#include <cpsw.h> |
||||||
|
#include <power/tps65217.h> |
||||||
|
#include <environment.h> |
||||||
|
#include <watchdog.h> |
||||||
|
#include <environment.h> |
||||||
|
#include "mmc.h" |
||||||
|
#include "board.h" |
||||||
|
|
||||||
|
DECLARE_GLOBAL_DATA_PTR; |
||||||
|
|
||||||
|
#if defined(CONFIG_SPL_BUILD) || \ |
||||||
|
(defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_DM_ETH)) |
||||||
|
static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; |
||||||
|
#endif |
||||||
|
static struct shc_eeprom __attribute__((section(".data"))) header; |
||||||
|
static int shc_eeprom_valid; |
||||||
|
|
||||||
|
/*
|
||||||
|
* Read header information from EEPROM into global structure. |
||||||
|
*/ |
||||||
|
static int read_eeprom(void) |
||||||
|
{ |
||||||
|
/* Check if baseboard eeprom is available */ |
||||||
|
if (i2c_probe(CONFIG_SYS_I2C_EEPROM_ADDR)) { |
||||||
|
puts("Could not probe the EEPROM; something fundamentally wrong on the I2C bus.\n"); |
||||||
|
return -ENODEV; |
||||||
|
} |
||||||
|
|
||||||
|
/* read the eeprom using i2c */ |
||||||
|
if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, 2, (uchar *)&header, |
||||||
|
sizeof(header))) { |
||||||
|
puts("Could not read the EEPROM; something fundamentally wrong on the I2C bus.\n"); |
||||||
|
return -EIO; |
||||||
|
} |
||||||
|
|
||||||
|
if (header.magic != HDR_MAGIC) { |
||||||
|
printf("Incorrect magic number (0x%x) in EEPROM\n", |
||||||
|
header.magic); |
||||||
|
return -EIO; |
||||||
|
} |
||||||
|
|
||||||
|
shc_eeprom_valid = 1; |
||||||
|
|
||||||
|
return 0; |
||||||
|
} |
||||||
|
|
||||||
|
static void shc_request_gpio(void) |
||||||
|
{ |
||||||
|
gpio_request(LED_PWR_BL_GPIO, "LED PWR BL"); |
||||||
|
gpio_request(LED_PWR_RD_GPIO, "LED PWR RD"); |
||||||
|
gpio_request(RESET_GPIO, "reset"); |
||||||
|
gpio_request(WIFI_REGEN_GPIO, "WIFI REGEN"); |
||||||
|
gpio_request(WIFI_RST_GPIO, "WIFI rst"); |
||||||
|
gpio_request(ZIGBEE_RST_GPIO, "ZigBee rst"); |
||||||
|
gpio_request(BIDCOS_RST_GPIO, "BIDCOS rst"); |
||||||
|
gpio_request(ENOC_RST_GPIO, "ENOC rst"); |
||||||
|
#if defined CONFIG_B_SAMPLE |
||||||
|
gpio_request(LED_PWR_GN_GPIO, "LED PWR GN"); |
||||||
|
gpio_request(LED_CONN_BL_GPIO, "LED CONN BL"); |
||||||
|
gpio_request(LED_CONN_RD_GPIO, "LED CONN RD"); |
||||||
|
gpio_request(LED_CONN_GN_GPIO, "LED CONN GN"); |
||||||
|
#else |
||||||
|
gpio_request(LED_LAN_BL_GPIO, "LED LAN BL"); |
||||||
|
gpio_request(LED_LAN_RD_GPIO, "LED LAN RD"); |
||||||
|
gpio_request(LED_CLOUD_BL_GPIO, "LED CLOUD BL"); |
||||||
|
gpio_request(LED_CLOUD_RD_GPIO, "LED CLOUD RD"); |
||||||
|
gpio_request(LED_PWM_GPIO, "LED PWM"); |
||||||
|
gpio_request(Z_WAVE_RST_GPIO, "Z WAVE rst"); |
||||||
|
#endif |
||||||
|
gpio_request(BACK_BUTTON_GPIO, "Back button"); |
||||||
|
gpio_request(FRONT_BUTTON_GPIO, "Front button"); |
||||||
|
} |
||||||
|
|
||||||
|
/*
|
||||||
|
* Function which forces all installed modules into running state for ICT |
||||||
|
* testing. Called by SPL. |
||||||
|
*/ |
||||||
|
static void __maybe_unused force_modules_running(void) |
||||||
|
{ |
||||||
|
/* Wi-Fi power regulator enable - high = enabled */ |
||||||
|
gpio_direction_output(WIFI_REGEN_GPIO, 1); |
||||||
|
/*
|
||||||
|
* Wait for Wi-Fi power regulator to reach a stable voltage |
||||||
|
* (soft-start time, max. 350 µs) |
||||||
|
*/ |
||||||
|
__udelay(350); |
||||||
|
|
||||||
|
/* Wi-Fi module reset - high = running */ |
||||||
|
gpio_direction_output(WIFI_RST_GPIO, 1); |
||||||
|
|
||||||
|
/* ZigBee reset - high = running */ |
||||||
|
gpio_direction_output(ZIGBEE_RST_GPIO, 1); |
||||||
|
|
||||||
|
/* BidCos reset - high = running */ |
||||||
|
gpio_direction_output(BIDCOS_RST_GPIO, 1); |
||||||
|
|
||||||
|
#if !defined(CONFIG_B_SAMPLE) |
||||||
|
/* Z-Wave reset - high = running */ |
||||||
|
gpio_direction_output(Z_WAVE_RST_GPIO, 1); |
||||||
|
#endif |
||||||
|
|
||||||
|
/* EnOcean reset - low = running */ |
||||||
|
gpio_direction_output(ENOC_RST_GPIO, 0); |
||||||
|
} |
||||||
|
|
||||||
|
/*
|
||||||
|
* Function which forces all installed modules into reset - to be released by |
||||||
|
* the OS, called by SPL |
||||||
|
*/ |
||||||
|
static void __maybe_unused force_modules_reset(void) |
||||||
|
{ |
||||||
|
/* Wi-Fi module reset - low = reset */ |
||||||
|
gpio_direction_output(WIFI_RST_GPIO, 0); |
||||||
|
|
||||||
|
/* Wi-Fi power regulator enable - low = disabled */ |
||||||
|
gpio_direction_output(WIFI_REGEN_GPIO, 0); |
||||||
|
|
||||||
|
/* ZigBee reset - low = reset */ |
||||||
|
gpio_direction_output(ZIGBEE_RST_GPIO, 0); |
||||||
|
|
||||||
|
/* BidCos reset - low = reset */ |
||||||
|
/*gpio_direction_output(BIDCOS_RST_GPIO, 0);*/ |
||||||
|
|
||||||
|
#if !defined(CONFIG_B_SAMPLE) |
||||||
|
/* Z-Wave reset - low = reset */ |
||||||
|
gpio_direction_output(Z_WAVE_RST_GPIO, 0); |
||||||
|
#endif |
||||||
|
|
||||||
|
/* EnOcean reset - high = reset*/ |
||||||
|
gpio_direction_output(ENOC_RST_GPIO, 1); |
||||||
|
} |
||||||
|
|
||||||
|
/*
|
||||||
|
* Function to set the LEDs in the state "Bootloader booting" |
||||||
|
*/ |
||||||
|
static void __maybe_unused leds_set_booting(void) |
||||||
|
{ |
||||||
|
#if defined(CONFIG_B_SAMPLE) |
||||||
|
|
||||||
|
/* Turn all red LEDs on */ |
||||||
|
gpio_direction_output(LED_PWR_RD_GPIO, 1); |
||||||
|
gpio_direction_output(LED_CONN_RD_GPIO, 1); |
||||||
|
|
||||||
|
#else /* All other SHCs starting with B2-Sample */ |
||||||
|
/* Set the PWM GPIO */ |
||||||
|
gpio_direction_output(LED_PWM_GPIO, 1); |
||||||
|
/* Turn all red LEDs on */ |
||||||
|
gpio_direction_output(LED_PWR_RD_GPIO, 1); |
||||||
|
gpio_direction_output(LED_LAN_RD_GPIO, 1); |
||||||
|
gpio_direction_output(LED_CLOUD_RD_GPIO, 1); |
||||||
|
|
||||||
|
#endif |
||||||
|
} |
||||||
|
|
||||||
|
/*
|
||||||
|
* Function to set the LEDs in the state "Bootloader error" |
||||||
|
*/ |
||||||
|
static void leds_set_failure(int state) |
||||||
|
{ |
||||||
|
#if defined(CONFIG_B_SAMPLE) |
||||||
|
/* Turn all blue and green LEDs off */ |
||||||
|
gpio_set_value(LED_PWR_BL_GPIO, 0); |
||||||
|
gpio_set_value(LED_PWR_GN_GPIO, 0); |
||||||
|
gpio_set_value(LED_CONN_BL_GPIO, 0); |
||||||
|
gpio_set_value(LED_CONN_GN_GPIO, 0); |
||||||
|
|
||||||
|
/* Turn all red LEDs to 'state' */ |
||||||
|
gpio_set_value(LED_PWR_RD_GPIO, state); |
||||||
|
gpio_set_value(LED_CONN_RD_GPIO, state); |
||||||
|
|
||||||
|
#else /* All other SHCs starting with B2-Sample */ |
||||||
|
/* Set the PWM GPIO */ |
||||||
|
gpio_direction_output(LED_PWM_GPIO, 1); |
||||||
|
|
||||||
|
/* Turn all blue LEDs off */ |
||||||
|
gpio_set_value(LED_PWR_BL_GPIO, 0); |
||||||
|
gpio_set_value(LED_LAN_BL_GPIO, 0); |
||||||
|
gpio_set_value(LED_CLOUD_BL_GPIO, 0); |
||||||
|
|
||||||
|
/* Turn all red LEDs to 'state' */ |
||||||
|
gpio_set_value(LED_PWR_RD_GPIO, state); |
||||||
|
gpio_set_value(LED_LAN_RD_GPIO, state); |
||||||
|
gpio_set_value(LED_CLOUD_RD_GPIO, state); |
||||||
|
#endif |
||||||
|
} |
||||||
|
|
||||||
|
/*
|
||||||
|
* Function to set the LEDs in the state "Bootloader finished" |
||||||
|
*/ |
||||||
|
static void leds_set_finish(void) |
||||||
|
{ |
||||||
|
#if defined(CONFIG_B_SAMPLE) |
||||||
|
/* Turn all LEDs off */ |
||||||
|
gpio_set_value(LED_PWR_BL_GPIO, 0); |
||||||
|
gpio_set_value(LED_PWR_RD_GPIO, 0); |
||||||
|
gpio_set_value(LED_PWR_GN_GPIO, 0); |
||||||
|
gpio_set_value(LED_CONN_BL_GPIO, 0); |
||||||
|
gpio_set_value(LED_CONN_RD_GPIO, 0); |
||||||
|
gpio_set_value(LED_CONN_GN_GPIO, 0); |
||||||
|
#else /* All other SHCs starting with B2-Sample */ |
||||||
|
/* Turn all LEDs off */ |
||||||
|
gpio_set_value(LED_PWR_BL_GPIO, 0); |
||||||
|
gpio_set_value(LED_PWR_RD_GPIO, 0); |
||||||
|
gpio_set_value(LED_LAN_BL_GPIO, 0); |
||||||
|
gpio_set_value(LED_LAN_RD_GPIO, 0); |
||||||
|
gpio_set_value(LED_CLOUD_BL_GPIO, 0); |
||||||
|
gpio_set_value(LED_CLOUD_RD_GPIO, 0); |
||||||
|
|
||||||
|
/* Turn off the PWM GPIO and mux it to EHRPWM */ |
||||||
|
gpio_set_value(LED_PWM_GPIO, 0); |
||||||
|
enable_shc_board_pwm_pin_mux(); |
||||||
|
#endif |
||||||
|
} |
||||||
|
|
||||||
|
static void check_button_status(void) |
||||||
|
{ |
||||||
|
ulong value; |
||||||
|
gpio_direction_input(FRONT_BUTTON_GPIO); |
||||||
|
value = gpio_get_value(FRONT_BUTTON_GPIO); |
||||||
|
|
||||||
|
if (value == 0) { |
||||||
|
printf("front button activated !\n"); |
||||||
|
setenv("harakiri", "1"); |
||||||
|
} |
||||||
|
} |
||||||
|
|
||||||
|
#ifndef CONFIG_SKIP_LOWLEVEL_INIT |
||||||
|
#ifdef CONFIG_SPL_OS_BOOT |
||||||
|
int spl_start_uboot(void) |
||||||
|
{ |
||||||
|
return 1; |
||||||
|
} |
||||||
|
#endif |
||||||
|
|
||||||
|
static void shc_board_early_init(void) |
||||||
|
{ |
||||||
|
shc_request_gpio(); |
||||||
|
# ifdef CONFIG_SHC_ICT |
||||||
|
/* Force all modules into enabled state for ICT testing */ |
||||||
|
force_modules_running(); |
||||||
|
# else |
||||||
|
/* Force all modules to enter Reset state until released by the OS */ |
||||||
|
force_modules_reset(); |
||||||
|
# endif |
||||||
|
leds_set_booting(); |
||||||
|
} |
||||||
|
|
||||||
|
#define MPU_SPREADING_PERMILLE 18 /* Spread 1.8 percent */ |
||||||
|
#define OSC (V_OSCK/1000000) |
||||||
|
/* Bosch: Predivider must be fixed to 4, so N = 4-1 */ |
||||||
|
#define MPUPLL_N (4-1) |
||||||
|
/* Bosch: Fref = 24 MHz / (N+1) = 24 MHz / 4 = 6 MHz */ |
||||||
|
#define MPUPLL_FREF (OSC / (MPUPLL_N + 1)) |
||||||
|
|
||||||
|
const struct dpll_params dpll_ddr_shc = { |
||||||
|
400, OSC-1, 1, -1, -1, -1, -1}; |
||||||
|
|
||||||
|
const struct dpll_params *get_dpll_ddr_params(void) |
||||||
|
{ |
||||||
|
return &dpll_ddr_shc; |
||||||
|
} |
||||||
|
|
||||||
|
/*
|
||||||
|
* As we enabled downspread SSC with 1.8%, the values needed to be corrected |
||||||
|
* such that the 20% overshoot will not lead to too high frequencies. |
||||||
|
* In all cases, this is achieved by subtracting one from M (6 MHz less). |
||||||
|
* Example: 600 MHz CPU |
||||||
|
* Step size: 24 MHz OSC, N = 4 (fix) --> Fref = 6 MHz |
||||||
|
* 600 MHz - 6 MHz (1x Fref) = 594 MHz |
||||||
|
* SSC: 594 MHz * 1.8% = 10.7 MHz SSC |
||||||
|
* Overshoot: 10.7 MHz * 20 % = 2.2 MHz |
||||||
|
* --> Fmax = 594 MHz + 2.2 MHz = 596.2 MHz, lower than 600 MHz --> OK! |
||||||
|
*/ |
||||||
|
const struct dpll_params dpll_mpu_shc_opp100 = { |
||||||
|
99, MPUPLL_N, 1, -1, -1, -1, -1}; |
||||||
|
|
||||||
|
void am33xx_spl_board_init(void) |
||||||
|
{ |
||||||
|
int sil_rev; |
||||||
|
int mpu_vdd; |
||||||
|
|
||||||
|
puts(BOARD_ID_STR); |
||||||
|
|
||||||
|
/*
|
||||||
|
* Set CORE Frequency to OPP100 |
||||||
|
* Hint: DCDC3 (CORE) defaults to 1.100V (for OPP100) |
||||||
|
*/ |
||||||
|
do_setup_dpll(&dpll_core_regs, &dpll_core_opp100); |
||||||
|
|
||||||
|
sil_rev = readl(&cdev->deviceid) >> 28; |
||||||
|
if (sil_rev < 2) { |
||||||
|
puts("We do not support Silicon Revisions below 2.0!\n"); |
||||||
|
return; |
||||||
|
} |
||||||
|
|
||||||
|
dpll_mpu_opp100.m = am335x_get_efuse_mpu_max_freq(cdev); |
||||||
|
if (i2c_probe(TPS65217_CHIP_PM)) |
||||||
|
return; |
||||||
|
|
||||||
|
/*
|
||||||
|
* Retrieve the CPU max frequency by reading the efuse |
||||||
|
* SHC-Default: 600 MHz |
||||||
|
*/ |
||||||
|
switch (dpll_mpu_opp100.m) { |
||||||
|
case MPUPLL_M_1000: |
||||||
|
mpu_vdd = TPS65217_DCDC_VOLT_SEL_1325MV; |
||||||
|
break; |
||||||
|
case MPUPLL_M_800: |
||||||
|
mpu_vdd = TPS65217_DCDC_VOLT_SEL_1275MV; |
||||||
|
break; |
||||||
|
case MPUPLL_M_720: |
||||||
|
mpu_vdd = TPS65217_DCDC_VOLT_SEL_1200MV; |
||||||
|
break; |
||||||
|
case MPUPLL_M_600: |
||||||
|
mpu_vdd = TPS65217_DCDC_VOLT_SEL_1100MV; |
||||||
|
break; |
||||||
|
case MPUPLL_M_300: |
||||||
|
mpu_vdd = TPS65217_DCDC_VOLT_SEL_950MV; |
||||||
|
break; |
||||||
|
default: |
||||||
|
puts("Cannot determine the frequency, failing!\n"); |
||||||
|
return; |
||||||
|
} |
||||||
|
|
||||||
|
if (tps65217_voltage_update(TPS65217_DEFDCDC2, mpu_vdd)) { |
||||||
|
puts("tps65217_voltage_update failure\n"); |
||||||
|
return; |
||||||
|
} |
||||||
|
|
||||||
|
/* Set MPU Frequency to what we detected */ |
||||||
|
printf("MPU reference clock runs at %d MHz\n", MPUPLL_FREF); |
||||||
|
printf("Setting MPU clock to %d MHz\n", MPUPLL_FREF * |
||||||
|
dpll_mpu_shc_opp100.m); |
||||||
|
do_setup_dpll(&dpll_mpu_regs, &dpll_mpu_shc_opp100); |
||||||
|
|
||||||
|
/* Enable Spread Spectrum for this freq to be clean on EMI side */ |
||||||
|
set_mpu_spreadspectrum(MPU_SPREADING_PERMILLE); |
||||||
|
|
||||||
|
/*
|
||||||
|
* Using the default voltages for the PMIC (TPS65217D) |
||||||
|
* LS1 = 1.8V (VDD_1V8) |
||||||
|
* LS2 = 3.3V (VDD_3V3A) |
||||||
|
* LDO1 = 1.8V (VIO and VRTC) |
||||||
|
* LDO2 = 3.3V (VDD_3V3AUX) |
||||||
|
*/ |
||||||
|
shc_board_early_init(); |
||||||
|
} |
||||||
|
|
||||||
|
void set_uart_mux_conf(void) |
||||||
|
{ |
||||||
|
enable_uart0_pin_mux(); |
||||||
|
} |
||||||
|
|
||||||
|
void set_mux_conf_regs(void) |
||||||
|
{ |
||||||
|
enable_shc_board_pin_mux(); |
||||||
|
} |
||||||
|
|
||||||
|
const struct ctrl_ioregs ioregs_evmsk = { |
||||||
|
.cm0ioctl = MT41K256M16HA125E_IOCTRL_VALUE, |
||||||
|
.cm1ioctl = MT41K256M16HA125E_IOCTRL_VALUE, |
||||||
|
.cm2ioctl = MT41K256M16HA125E_IOCTRL_VALUE, |
||||||
|
.dt0ioctl = MT41K256M16HA125E_IOCTRL_VALUE, |
||||||
|
.dt1ioctl = MT41K256M16HA125E_IOCTRL_VALUE, |
||||||
|
}; |
||||||
|
|
||||||
|
static const struct ddr_data ddr3_shc_data = { |
||||||
|
.datardsratio0 = MT41K256M16HA125E_RD_DQS, |
||||||
|
.datawdsratio0 = MT41K256M16HA125E_WR_DQS, |
||||||
|
.datafwsratio0 = MT41K256M16HA125E_PHY_FIFO_WE, |
||||||
|
.datawrsratio0 = MT41K256M16HA125E_PHY_WR_DATA, |
||||||
|
}; |
||||||
|
|
||||||
|
static const struct cmd_control ddr3_shc_cmd_ctrl_data = { |
||||||
|
.cmd0csratio = MT41K256M16HA125E_RATIO, |
||||||
|
.cmd0iclkout = MT41K256M16HA125E_INVERT_CLKOUT, |
||||||
|
|
||||||
|
.cmd1csratio = MT41K256M16HA125E_RATIO, |
||||||
|
.cmd1iclkout = MT41K256M16HA125E_INVERT_CLKOUT, |
||||||
|
|
||||||
|
.cmd2csratio = MT41K256M16HA125E_RATIO, |
||||||
|
.cmd2iclkout = MT41K256M16HA125E_INVERT_CLKOUT, |
||||||
|
}; |
||||||
|
|
||||||
|
static struct emif_regs ddr3_shc_emif_reg_data = { |
||||||
|
.sdram_config = MT41K256M16HA125E_EMIF_SDCFG, |
||||||
|
.ref_ctrl = MT41K256M16HA125E_EMIF_SDREF, |
||||||
|
.sdram_tim1 = MT41K256M16HA125E_EMIF_TIM1, |
||||||
|
.sdram_tim2 = MT41K256M16HA125E_EMIF_TIM2, |
||||||
|
.sdram_tim3 = MT41K256M16HA125E_EMIF_TIM3, |
||||||
|
.zq_config = MT41K256M16HA125E_ZQ_CFG, |
||||||
|
.emif_ddr_phy_ctlr_1 = MT41K256M16HA125E_EMIF_READ_LATENCY | |
||||||
|
PHY_EN_DYN_PWRDN, |
||||||
|
}; |
||||||
|
|
||||||
|
void sdram_init(void) |
||||||
|
{ |
||||||
|
/* Configure the DDR3 RAM */ |
||||||
|
config_ddr(400, &ioregs_evmsk, &ddr3_shc_data, |
||||||
|
&ddr3_shc_cmd_ctrl_data, &ddr3_shc_emif_reg_data, 0); |
||||||
|
} |
||||||
|
#endif |
||||||
|
|
||||||
|
/*
|
||||||
|
* Basic board specific setup. Pinmux has been handled already. |
||||||
|
*/ |
||||||
|
int board_init(void) |
||||||
|
{ |
||||||
|
#if defined(CONFIG_HW_WATCHDOG) |
||||||
|
hw_watchdog_init(); |
||||||
|
#endif |
||||||
|
i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); |
||||||
|
if (read_eeprom() < 0) |
||||||
|
puts("EEPROM Content Invalid.\n"); |
||||||
|
|
||||||
|
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; |
||||||
|
#if defined(CONFIG_NOR) || defined(CONFIG_NAND) |
||||||
|
gpmc_init(); |
||||||
|
#endif |
||||||
|
shc_request_gpio(); |
||||||
|
|
||||||
|
return 0; |
||||||
|
} |
||||||
|
|
||||||
|
#ifdef CONFIG_BOARD_LATE_INIT |
||||||
|
int board_late_init(void) |
||||||
|
{ |
||||||
|
check_button_status(); |
||||||
|
#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG |
||||||
|
if (shc_eeprom_valid) |
||||||
|
if (is_valid_ethaddr(header.mac_addr)) |
||||||
|
eth_setenv_enetaddr("ethaddr", header.mac_addr); |
||||||
|
#endif |
||||||
|
|
||||||
|
return 0; |
||||||
|
} |
||||||
|
#endif |
||||||
|
|
||||||
|
#ifndef CONFIG_DM_ETH |
||||||
|
#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \ |
||||||
|
(defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD)) |
||||||
|
static void cpsw_control(int enabled) |
||||||
|
{ |
||||||
|
/* VTP can be added here */ |
||||||
|
|
||||||
|
return; |
||||||
|
} |
||||||
|
|
||||||
|
static struct cpsw_slave_data cpsw_slaves[] = { |
||||||
|
{ |
||||||
|
.slave_reg_ofs = 0x208, |
||||||
|
.sliver_reg_ofs = 0xd80, |
||||||
|
.phy_addr = 0, |
||||||
|
}, |
||||||
|
{ |
||||||
|
.slave_reg_ofs = 0x308, |
||||||
|
.sliver_reg_ofs = 0xdc0, |
||||||
|
.phy_addr = 1, |
||||||
|
}, |
||||||
|
}; |
||||||
|
|
||||||
|
static struct cpsw_platform_data cpsw_data = { |
||||||
|
.mdio_base = CPSW_MDIO_BASE, |
||||||
|
.cpsw_base = CPSW_BASE, |
||||||
|
.mdio_div = 0xff, |
||||||
|
.channels = 8, |
||||||
|
.cpdma_reg_ofs = 0x800, |
||||||
|
.slaves = 1, |
||||||
|
.slave_data = cpsw_slaves, |
||||||
|
.ale_reg_ofs = 0xd00, |
||||||
|
.ale_entries = 1024, |
||||||
|
.host_port_reg_ofs = 0x108, |
||||||
|
.hw_stats_reg_ofs = 0x900, |
||||||
|
.bd_ram_ofs = 0x2000, |
||||||
|
.mac_control = (1 << 5), |
||||||
|
.control = cpsw_control, |
||||||
|
.host_port_num = 0, |
||||||
|
.version = CPSW_CTRL_VERSION_2, |
||||||
|
}; |
||||||
|
#endif |
||||||
|
|
||||||
|
/*
|
||||||
|
* This function will: |
||||||
|
* Read the eFuse for MAC addresses, and set ethaddr/eth1addr/usbnet_devaddr |
||||||
|
* in the environment |
||||||
|
* Perform fixups to the PHY present on certain boards. We only need this |
||||||
|
* function in: |
||||||
|
* - SPL with either CPSW or USB ethernet support |
||||||
|
* - Full U-Boot, with either CPSW or USB ethernet |
||||||
|
* Build in only these cases to avoid warnings about unused variables |
||||||
|
* when we build an SPL that has neither option but full U-Boot will. |
||||||
|
*/ |
||||||
|
#if ((defined(CONFIG_SPL_ETH_SUPPORT) || \ |
||||||
|
defined(CONFIG_SPL_USBETH_SUPPORT)) && \
|
||||||
|
defined(CONFIG_SPL_BUILD)) || \
|
||||||
|
((defined(CONFIG_DRIVER_TI_CPSW) || \
|
||||||
|
defined(CONFIG_USB_ETHER) && defined(CONFIG_USB_MUSB_GADGET)) && \
|
||||||
|
!defined(CONFIG_SPL_BUILD)) |
||||||
|
int board_eth_init(bd_t *bis) |
||||||
|
{ |
||||||
|
int rv, n = 0; |
||||||
|
uint8_t mac_addr[6]; |
||||||
|
uint32_t mac_hi, mac_lo; |
||||||
|
|
||||||
|
/* try reading mac address from efuse */ |
||||||
|
mac_lo = readl(&cdev->macid0l); |
||||||
|
mac_hi = readl(&cdev->macid0h); |
||||||
|
mac_addr[0] = mac_hi & 0xFF; |
||||||
|
mac_addr[1] = (mac_hi & 0xFF00) >> 8; |
||||||
|
mac_addr[2] = (mac_hi & 0xFF0000) >> 16; |
||||||
|
mac_addr[3] = (mac_hi & 0xFF000000) >> 24; |
||||||
|
mac_addr[4] = mac_lo & 0xFF; |
||||||
|
mac_addr[5] = (mac_lo & 0xFF00) >> 8; |
||||||
|
|
||||||
|
#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \ |
||||||
|
(defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD)) |
||||||
|
if (!getenv("ethaddr")) { |
||||||
|
printf("<ethaddr> not set. Validating first E-fuse MAC\n"); |
||||||
|
|
||||||
|
if (is_valid_ethaddr(mac_addr)) |
||||||
|
eth_setenv_enetaddr("ethaddr", mac_addr); |
||||||
|
} |
||||||
|
|
||||||
|
writel(MII_MODE_ENABLE, &cdev->miisel); |
||||||
|
cpsw_slaves[0].phy_if = PHY_INTERFACE_MODE_MII; |
||||||
|
cpsw_slaves[1].phy_if = cpsw_slaves[0].phy_if; |
||||||
|
rv = cpsw_register(&cpsw_data); |
||||||
|
if (rv < 0) |
||||||
|
printf("Error %d registering CPSW switch\n", rv); |
||||||
|
else |
||||||
|
n += rv; |
||||||
|
#endif |
||||||
|
|
||||||
|
#if defined(CONFIG_USB_ETHER) && \ |
||||||
|
(!defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_USBETH_SUPPORT)) |
||||||
|
if (is_valid_ethaddr(mac_addr)) |
||||||
|
eth_setenv_enetaddr("usbnet_devaddr", mac_addr); |
||||||
|
|
||||||
|
rv = usb_eth_initialize(bis); |
||||||
|
if (rv < 0) |
||||||
|
printf("Error %d registering USB_ETHER\n", rv); |
||||||
|
else |
||||||
|
n += rv; |
||||||
|
#endif |
||||||
|
return n; |
||||||
|
} |
||||||
|
#endif |
||||||
|
|
||||||
|
#endif /* CONFIG_DM_ETH */ |
||||||
|
|
||||||
|
#ifdef CONFIG_SHOW_BOOT_PROGRESS |
||||||
|
static void bosch_check_reset_pin(void) |
||||||
|
{ |
||||||
|
if (readl(GPIO1_BASE + OMAP_GPIO_IRQSTATUS_SET_0) & RESET_MASK) { |
||||||
|
printf("Resetting ...\n"); |
||||||
|
writel(RESET_MASK, GPIO1_BASE + OMAP_GPIO_IRQSTATUS_SET_0); |
||||||
|
disable_interrupts(); |
||||||
|
reset_cpu(0); |
||||||
|
/*NOTREACHED*/ |
||||||
|
} |
||||||
|
} |
||||||
|
|
||||||
|
static void hang_bosch(const char *cause, int code) |
||||||
|
{ |
||||||
|
int lv; |
||||||
|
|
||||||
|
gpio_direction_input(RESET_GPIO); |
||||||
|
|
||||||
|
/* Enable reset pin interrupt on falling edge */ |
||||||
|
writel(RESET_MASK, GPIO1_BASE + OMAP_GPIO_IRQSTATUS_SET_0); |
||||||
|
writel(RESET_MASK, GPIO1_BASE + OMAP_GPIO_FALLINGDETECT); |
||||||
|
enable_interrupts(); |
||||||
|
|
||||||
|
puts(cause); |
||||||
|
for (;;) { |
||||||
|
for (lv = 0; lv < code; lv++) { |
||||||
|
bosch_check_reset_pin(); |
||||||
|
leds_set_failure(1); |
||||||
|
__udelay(150 * 1000); |
||||||
|
leds_set_failure(0); |
||||||
|
__udelay(150 * 1000); |
||||||
|
} |
||||||
|
#if defined(BLINK_CODE) |
||||||
|
__udelay(300 * 1000); |
||||||
|
#endif |
||||||
|
} |
||||||
|
} |
||||||
|
|
||||||
|
void show_boot_progress(int val) |
||||||
|
{ |
||||||
|
switch (val) { |
||||||
|
case BOOTSTAGE_ID_NEED_RESET: |
||||||
|
hang_bosch("need reset", 4); |
||||||
|
break; |
||||||
|
} |
||||||
|
} |
||||||
|
#endif |
||||||
|
|
||||||
|
void arch_preboot_os(void) |
||||||
|
{ |
||||||
|
leds_set_finish(); |
||||||
|
} |
||||||
|
|
||||||
|
#if defined(CONFIG_GENERIC_MMC) |
||||||
|
int board_mmc_init(bd_t *bis) |
||||||
|
{ |
||||||
|
int ret; |
||||||
|
|
||||||
|
/* Bosch: Do not enable 52MHz for eMMC device to avoid EMI */ |
||||||
|
ret = omap_mmc_init(0, MMC_MODE_HS_52MHz, 26000000, -1, -1); |
||||||
|
if (ret) |
||||||
|
return ret; |
||||||
|
|
||||||
|
ret = omap_mmc_init(1, MMC_MODE_HS_52MHz, 26000000, -1, -1); |
||||||
|
return ret; |
||||||
|
} |
||||||
|
#endif |
@ -0,0 +1,187 @@ |
|||||||
|
/*
|
||||||
|
* board.h |
||||||
|
* |
||||||
|
* (C) Copyright 2016 |
||||||
|
* Heiko Schocher, DENX Software Engineering, hs@denx.de. |
||||||
|
* |
||||||
|
* Based on: |
||||||
|
* TI AM335x boards information header |
||||||
|
* |
||||||
|
* Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
|
||||||
|
* |
||||||
|
* SPDX-License-Identifier: GPL-2.0+ |
||||||
|
*/ |
||||||
|
|
||||||
|
#ifndef _BOARD_H_ |
||||||
|
#define _BOARD_H_ |
||||||
|
|
||||||
|
/* Definition to control the GPIOs (for LEDs and Reset) */ |
||||||
|
#define GPIO_TO_PIN(bank, gpio) (32 * (bank) + (gpio)) |
||||||
|
|
||||||
|
static inline int board_is_b_sample(void) |
||||||
|
{ |
||||||
|
#if defined CONFIG_B_SAMPLE |
||||||
|
return 1; |
||||||
|
#else |
||||||
|
return 0; |
||||||
|
#endif |
||||||
|
} |
||||||
|
|
||||||
|
static inline int board_is_c_sample(void) |
||||||
|
{ |
||||||
|
#if defined CONFIG_C_SAMPLE |
||||||
|
return 1; |
||||||
|
#else |
||||||
|
return 0; |
||||||
|
#endif |
||||||
|
} |
||||||
|
|
||||||
|
static inline int board_is_c3_sample(void) |
||||||
|
{ |
||||||
|
#if defined CONFIG_C3_SAMPLE |
||||||
|
return 1; |
||||||
|
#else |
||||||
|
return 0; |
||||||
|
#endif |
||||||
|
} |
||||||
|
|
||||||
|
static inline int board_is_series(void) |
||||||
|
{ |
||||||
|
#if defined CONFIG_SERIES |
||||||
|
return 1; |
||||||
|
#else |
||||||
|
return 0; |
||||||
|
#endif |
||||||
|
} |
||||||
|
|
||||||
|
/*
|
||||||
|
* Definitions for pinmuxing header and Board ID strings |
||||||
|
*/ |
||||||
|
#if defined CONFIG_B_SAMPLE |
||||||
|
# define BOARD_ID_STR "SHC B-Sample\n" |
||||||
|
#elif defined CONFIG_B2_SAMPLE |
||||||
|
# define BOARD_ID_STR "SHC B2-Sample\n" |
||||||
|
#elif defined CONFIG_C_SAMPLE |
||||||
|
# if defined(CONFIG_SHC_NETBOOT) |
||||||
|
# define BOARD_ID_STR "#### NETBOOT ####\nSHC C-Sample\n" |
||||||
|
# elif defined(CONFIG_SHC_SDBOOT) |
||||||
|
# define BOARD_ID_STR "#### SDBOOT ####\nSHC C-Sample\n" |
||||||
|
# else |
||||||
|
# define BOARD_ID_STR "SHC C-Sample\n" |
||||||
|
# endif |
||||||
|
#elif defined CONFIG_C2_SAMPLE |
||||||
|
# if defined(CONFIG_SHC_ICT) |
||||||
|
# define BOARD_ID_STR "#### ICT ####\nSHC C2-Sample\n" |
||||||
|
# elif defined(CONFIG_SHC_NETBOOT) |
||||||
|
# define BOARD_ID_STR "#### NETBOOT ####\nSHC C2-Sample\n" |
||||||
|
# elif defined(CONFIG_SHC_SDBOOT) |
||||||
|
# define BOARD_ID_STR "#### SDBOOT ####\nSHC C2-Sample\n" |
||||||
|
# else |
||||||
|
# define BOARD_ID_STR "SHC C2-Sample\n" |
||||||
|
# endif |
||||||
|
#elif defined CONFIG_C3_SAMPLE |
||||||
|
# if defined(CONFIG_SHC_ICT) |
||||||
|
# define BOARD_ID_STR "#### ICT ####\nSHC C3-Sample\n" |
||||||
|
# elif defined(CONFIG_SHC_NETBOOT) |
||||||
|
# define BOARD_ID_STR "#### NETBOOT ####\nSHC C3-Sample\n" |
||||||
|
# elif defined(CONFIG_SHC_SDBOOT) |
||||||
|
# define BOARD_ID_STR "#### SDBOOT ####\nSHC C3-Sample\n" |
||||||
|
# else |
||||||
|
# define BOARD_ID_STR "SHC C3-Sample\n" |
||||||
|
# endif |
||||||
|
#elif defined CONFIG_SERIES |
||||||
|
# if defined(CONFIG_SHC_ICT) |
||||||
|
# define BOARD_ID_STR "#### ICT ####\nSHC\n" |
||||||
|
# elif defined(CONFIG_SHC_NETBOOT) |
||||||
|
# define BOARD_ID_STR "#### NETBOOT ####\nSHC\n" |
||||||
|
# elif defined(CONFIG_SHC_SDBOOT) |
||||||
|
# define BOARD_ID_STR "#### SDBOOT ####\nSHC\n" |
||||||
|
# else |
||||||
|
# define BOARD_ID_STR "SHC\n" |
||||||
|
# endif |
||||||
|
#else |
||||||
|
# define BOARD_ID_STR "Unknown device!\n" |
||||||
|
#endif |
||||||
|
|
||||||
|
/*
|
||||||
|
* Definitions for GPIO pin assignments |
||||||
|
*/ |
||||||
|
#if defined CONFIG_B_SAMPLE |
||||||
|
|
||||||
|
# define LED_PWR_BL_GPIO GPIO_TO_PIN(1, 17) |
||||||
|
# define LED_PWR_RD_GPIO GPIO_TO_PIN(1, 18) |
||||||
|
# define LED_PWR_GN_GPIO GPIO_TO_PIN(1, 19) |
||||||
|
# define LED_CONN_BL_GPIO GPIO_TO_PIN(0, 26) |
||||||
|
# define LED_CONN_RD_GPIO GPIO_TO_PIN(0, 22) |
||||||
|
# define LED_CONN_GN_GPIO GPIO_TO_PIN(0, 23) |
||||||
|
# define RESET_GPIO GPIO_TO_PIN(1, 29) |
||||||
|
# define WIFI_REGEN_GPIO GPIO_TO_PIN(1, 16) |
||||||
|
# define WIFI_RST_GPIO GPIO_TO_PIN(0, 27) |
||||||
|
# define ZIGBEE_RST_GPIO GPIO_TO_PIN(3, 18) |
||||||
|
# define BIDCOS_RST_GPIO GPIO_TO_PIN(0, 12) |
||||||
|
# define ENOC_RST_GPIO GPIO_TO_PIN(1, 22) |
||||||
|
|
||||||
|
#else |
||||||
|
|
||||||
|
# define LED_PWR_BL_GPIO GPIO_TO_PIN(0, 22) |
||||||
|
# define LED_PWR_RD_GPIO GPIO_TO_PIN(0, 23) |
||||||
|
# define LED_LAN_BL_GPIO GPIO_TO_PIN(1, 17) |
||||||
|
# define LED_LAN_RD_GPIO GPIO_TO_PIN(0, 26) |
||||||
|
# define LED_CLOUD_BL_GPIO GPIO_TO_PIN(1, 18) |
||||||
|
# define LED_CLOUD_RD_GPIO GPIO_TO_PIN(2, 2) |
||||||
|
# define LED_PWM_GPIO GPIO_TO_PIN(1, 19) |
||||||
|
# define RESET_GPIO GPIO_TO_PIN(1, 29) |
||||||
|
# define WIFI_REGEN_GPIO GPIO_TO_PIN(1, 16) |
||||||
|
# define WIFI_RST_GPIO GPIO_TO_PIN(0, 27) |
||||||
|
# define ZIGBEE_RST_GPIO GPIO_TO_PIN(3, 18) |
||||||
|
# define BIDCOS_RST_GPIO GPIO_TO_PIN(1, 24) |
||||||
|
# define Z_WAVE_RST_GPIO GPIO_TO_PIN(1, 21) |
||||||
|
# define ENOC_RST_GPIO GPIO_TO_PIN(1, 22) |
||||||
|
|
||||||
|
#endif |
||||||
|
|
||||||
|
#define BACK_BUTTON_GPIO GPIO_TO_PIN(1, 29) |
||||||
|
#define FRONT_BUTTON_GPIO GPIO_TO_PIN(1, 25) |
||||||
|
|
||||||
|
/* Reset is on GPIO pin 29 of GPIO bank 1 */ |
||||||
|
#define RESET_MASK (0x1 << 29) |
||||||
|
|
||||||
|
#define HDR_MAGIC 0x43485342 |
||||||
|
#define HDR_ETH_ALEN 6 |
||||||
|
#define HDR_NAME_LEN 8 |
||||||
|
#define HDR_REV_LEN 8 |
||||||
|
#define HDR_SER_LEN 16 |
||||||
|
#define HDR_ROOT_LEN 12 |
||||||
|
#define HDR_FATC_LEN 12 |
||||||
|
|
||||||
|
/*
|
||||||
|
* SHC parameters held in On-Board I²C EEPROM device. |
||||||
|
* |
||||||
|
* Header Format |
||||||
|
* |
||||||
|
* Name Size Contents |
||||||
|
*------------------------------------------------------------- |
||||||
|
* Magic 4 0x42 0x53 0x48 0x43 [BSHC] |
||||||
|
* |
||||||
|
* Version 2 0x0100 for v1.0 |
||||||
|
* |
||||||
|
* Lenght 2 The length of the complete structure, not only this header |
||||||
|
* |
||||||
|
* Eth-MAC 6 Ethernet MAC Address |
||||||
|
* SHC Pool: 7C:AC:B2:00:10:01 - TBD |
||||||
|
* |
||||||
|
* --- Further values follow, not important for Bootloader --- |
||||||
|
*/ |
||||||
|
|
||||||
|
struct shc_eeprom { |
||||||
|
u32 magic; |
||||||
|
u16 version; |
||||||
|
u16 lenght; |
||||||
|
uint8_t mac_addr[HDR_ETH_ALEN]; |
||||||
|
}; |
||||||
|
|
||||||
|
void enable_uart0_pin_mux(void); |
||||||
|
void enable_shc_board_pin_mux(void); |
||||||
|
void enable_shc_board_pwm_pin_mux(void); |
||||||
|
|
||||||
|
#endif |
@ -0,0 +1,261 @@ |
|||||||
|
/*
|
||||||
|
* mux.c |
||||||
|
* |
||||||
|
* (C) Copyright 2016 |
||||||
|
* Heiko Schocher, DENX Software Engineering, hs@denx.de. |
||||||
|
* |
||||||
|
* Based on: |
||||||
|
* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
|
||||||
|
* |
||||||
|
* SPDX-License-Identifier: GPL-2.0+ |
||||||
|
*/ |
||||||
|
|
||||||
|
#include <common.h> |
||||||
|
#include <asm/arch/sys_proto.h> |
||||||
|
#include <asm/arch/hardware.h> |
||||||
|
#include <asm/arch/mux.h> |
||||||
|
#include <asm/io.h> |
||||||
|
#include <i2c.h> |
||||||
|
#include "board.h" |
||||||
|
|
||||||
|
static struct module_pin_mux uart0_pin_mux[] = { |
||||||
|
{OFFSET(uart0_rxd), (MODE(0) | PULLUDEN | RXACTIVE)}, /* UART0_RXD */ |
||||||
|
{OFFSET(uart0_txd), (MODE(0) | PULLUDDIS)}, /* UART0_TXD */ |
||||||
|
{OFFSET(uart0_ctsn), (MODE(0) | PULLUDEN | RXACTIVE)}, /* UART0_CTS */ |
||||||
|
{OFFSET(uart0_rtsn), (MODE(0) | PULLUDDIS)}, /* UART0_RTS */ |
||||||
|
{-1}, |
||||||
|
}; |
||||||
|
|
||||||
|
static struct module_pin_mux uart1_pin_mux[] = { |
||||||
|
{OFFSET(uart1_rxd), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* UART1_RXD */ |
||||||
|
{OFFSET(uart1_txd), (MODE(0) | PULLUDDIS)}, /* UART1_TXD */ |
||||||
|
{OFFSET(uart1_ctsn), (MODE(0) | PULLUDEN | RXACTIVE)}, /* UART1_CTS */ |
||||||
|
{OFFSET(uart1_rtsn), (MODE(0) | PULLUDDIS)}, /* UART1_RTS */ |
||||||
|
{-1}, |
||||||
|
}; |
||||||
|
|
||||||
|
static struct module_pin_mux uart2_pin_mux[] = { |
||||||
|
{OFFSET(spi0_sclk), (MODE(1) | PULLUDDIS | RXACTIVE)}, /* UART2_RXD */ |
||||||
|
{OFFSET(spi0_d0), (MODE(1) | PULLUDDIS)}, /* UART2_TXD */ |
||||||
|
{-1}, |
||||||
|
}; |
||||||
|
|
||||||
|
static struct module_pin_mux spi1_pin_mux[] = { |
||||||
|
{OFFSET(mcasp0_aclkx), (MODE(3) | PULLUDEN | RXACTIVE)},/* SPI1_SCLK */ |
||||||
|
{OFFSET(mcasp0_fsx), (MODE(3) | PULLUDEN | RXACTIVE)},/* SPI1_D0 */ |
||||||
|
{OFFSET(mcasp0_axr0), (MODE(3) | PULLUDEN | RXACTIVE)},/* SPI1_D1 */ |
||||||
|
{OFFSET(mcasp0_ahclkr), (MODE(3) | PULLUDEN | RXACTIVE)},/* SPI1_CS0 */ |
||||||
|
{-1}, |
||||||
|
}; |
||||||
|
|
||||||
|
static struct module_pin_mux uart4_pin_mux[] = { |
||||||
|
{OFFSET(gpmc_wait0), (MODE(6) | PULLUP_EN | RXACTIVE)}, /* UART4_RXD */ |
||||||
|
{OFFSET(gpmc_wpn), (MODE(6) | PULLUP_EN)}, /* UART4_TXD */ |
||||||
|
{-1}, |
||||||
|
}; |
||||||
|
|
||||||
|
static struct module_pin_mux mmc0_pin_mux[] = { |
||||||
|
{OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUDDIS)}, /* MMC0_DAT3 */ |
||||||
|
{OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUDDIS)}, /* MMC0_DAT2 */ |
||||||
|
{OFFSET(mmc0_dat1), (MODE(0) | RXACTIVE | PULLUDDIS)}, /* MMC0_DAT1 */ |
||||||
|
{OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUDDIS)}, /* MMC0_DAT0 */ |
||||||
|
{OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CLK */ |
||||||
|
{OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUDDIS)}, /* MMC0_CMD */ |
||||||
|
{OFFSET(spi0_cs1), (MODE(5) | RXACTIVE | PULLUDDIS)}, /* MMC0_CD */ |
||||||
|
{-1}, |
||||||
|
}; |
||||||
|
|
||||||
|
static struct module_pin_mux mmc1_pin_mux[] = { |
||||||
|
{OFFSET(gpmc_ad7), (MODE(1) | RXACTIVE | PULLUP_EN)}, /* MMC1_DAT3 */ |
||||||
|
{OFFSET(gpmc_ad6), (MODE(1) | RXACTIVE | PULLUP_EN)}, /* MMC1_DAT3 */ |
||||||
|
{OFFSET(gpmc_ad5), (MODE(1) | RXACTIVE | PULLUP_EN)}, /* MMC1_DAT3 */ |
||||||
|
{OFFSET(gpmc_ad4), (MODE(1) | RXACTIVE | PULLUP_EN)}, /* MMC1_DAT3 */ |
||||||
|
{OFFSET(gpmc_ad3), (MODE(1) | RXACTIVE | PULLUP_EN)}, /* MMC1_DAT3 */ |
||||||
|
{OFFSET(gpmc_ad2), (MODE(1) | RXACTIVE | PULLUP_EN)}, /* MMC1_DAT2 */ |
||||||
|
{OFFSET(gpmc_ad1), (MODE(1) | RXACTIVE | PULLUP_EN)}, /* MMC1_DAT1 */ |
||||||
|
{OFFSET(gpmc_ad0), (MODE(1) | RXACTIVE | PULLUP_EN)}, /* MMC1_DAT0 */ |
||||||
|
{OFFSET(gpmc_csn1), (MODE(2) | RXACTIVE | PULLUDDIS)}, /* MMC1_CLK */ |
||||||
|
{OFFSET(gpmc_csn2), (MODE(2) | RXACTIVE | PULLUP_EN)}, /* MMC1_CMD */ |
||||||
|
{-1}, |
||||||
|
}; |
||||||
|
|
||||||
|
static struct module_pin_mux mmc2_pin_mux[] = { |
||||||
|
{OFFSET(gpmc_ad12), (MODE(3) | PULLUDDIS | RXACTIVE)}, /* MMC2_DAT0 */ |
||||||
|
{OFFSET(gpmc_ad13), (MODE(3) | PULLUDDIS | RXACTIVE)}, /* MMC2_DAT1 */ |
||||||
|
{OFFSET(gpmc_ad14), (MODE(3) | PULLUDDIS | RXACTIVE)}, /* MMC2_DAT2 */ |
||||||
|
{OFFSET(gpmc_ad15), (MODE(3) | PULLUDDIS | RXACTIVE)}, /* MMC2_DAT3 */ |
||||||
|
{OFFSET(gpmc_csn3), (MODE(3) | RXACTIVE | PULLUDDIS)}, /* MMC2_CMD */ |
||||||
|
{OFFSET(gpmc_clk), (MODE(3) | RXACTIVE | PULLUDDIS)}, /* MMC2_CLK */ |
||||||
|
{-1}, |
||||||
|
}; |
||||||
|
static struct module_pin_mux i2c0_pin_mux[] = { |
||||||
|
{OFFSET(i2c0_sda), (MODE(0) | RXACTIVE | PULLUDDIS)}, /* I2C_DATA */ |
||||||
|
{OFFSET(i2c0_scl), (MODE(0) | RXACTIVE | PULLUDDIS)}, /* I2C_SCLK */ |
||||||
|
{-1}, |
||||||
|
}; |
||||||
|
|
||||||
|
static struct module_pin_mux gpio0_7_pin_mux[] = { |
||||||
|
{OFFSET(ecap0_in_pwm0_out), (MODE(7) | PULLUP_EN)}, /* GPIO0_7 */ |
||||||
|
{-1}, |
||||||
|
}; |
||||||
|
|
||||||
|
static struct module_pin_mux jtag_pin_mux[] = { |
||||||
|
{OFFSET(xdma_event_intr0), (MODE(6) | RXACTIVE | PULLUDDIS)}, |
||||||
|
{OFFSET(xdma_event_intr1), (MODE(6) | RXACTIVE | PULLUDDIS)}, |
||||||
|
{OFFSET(nresetin_out), (MODE(0) | RXACTIVE | PULLUDDIS)}, |
||||||
|
{OFFSET(nnmi), (MODE(0) | RXACTIVE | PULLUDDIS)}, |
||||||
|
{OFFSET(tms), (MODE(0) | RXACTIVE | PULLUP_EN)}, |
||||||
|
{OFFSET(tdi), (MODE(0) | RXACTIVE | PULLUP_EN)}, |
||||||
|
{OFFSET(tdo), (MODE(0) | PULLUP_EN)}, |
||||||
|
{OFFSET(tck), (MODE(0) | RXACTIVE | PULLUP_EN)}, |
||||||
|
{OFFSET(ntrst), (MODE(0) | RXACTIVE)}, |
||||||
|
{OFFSET(emu0), (MODE(0) | RXACTIVE | PULLUP_EN)}, |
||||||
|
{OFFSET(emu1), (MODE(0) | RXACTIVE | PULLUP_EN)}, |
||||||
|
{OFFSET(pmic_power_en), (MODE(0) | PULLUP_EN)}, |
||||||
|
{OFFSET(rsvd2), (MODE(0) | PULLUP_EN)}, |
||||||
|
{OFFSET(rtc_porz), (MODE(0) | RXACTIVE | PULLUDDIS)}, |
||||||
|
{OFFSET(ext_wakeup), (MODE(0) | RXACTIVE)}, |
||||||
|
{OFFSET(enz_kaldo_1p8v), (MODE(0) | RXACTIVE | PULLUDDIS)}, |
||||||
|
{OFFSET(usb0_drvvbus), (MODE(0) | PULLUDEN)}, |
||||||
|
{OFFSET(usb1_drvvbus), (MODE(0) | PULLUDDIS)}, |
||||||
|
{-1}, |
||||||
|
}; |
||||||
|
|
||||||
|
static struct module_pin_mux gpio_pin_mux[] = { |
||||||
|
{OFFSET(gpmc_ad8), (MODE(7) | PULLUDDIS)}, /* gpio0[22] - LED_PWR_BL (external pull-down) */ |
||||||
|
{OFFSET(gpmc_ad9), (MODE(7) | PULLUDDIS)}, /* gpio0[23] - LED_PWR_RD (external pull-down) */ |
||||||
|
{OFFSET(gpmc_ad10), (MODE(7) | PULLUDDIS)}, /* gpio0[26] - LED_LAN_RD (external pull-down) */ |
||||||
|
{OFFSET(gpmc_ad11), (MODE(7) | PULLUDDIS)}, /* gpio0[27] - #WIFI_RST (external pull-down) */ |
||||||
|
{OFFSET(gpmc_a0), (MODE(7) | PULLUDDIS)}, /* gpio1[16] - WIFI_REGEN */ |
||||||
|
{OFFSET(gpmc_a1), (MODE(7) | PULLUDDIS)}, /* gpio1[17] - LED_LAN_BL */ |
||||||
|
{OFFSET(gpmc_a2), (MODE(7) | PULLUDDIS)}, /* gpio1[18] - LED_Cloud_BL */ |
||||||
|
{OFFSET(gpmc_a3), (MODE(7) | PULLUDDIS)}, /* gpio1[19] - LED_PWM as GPIO */ |
||||||
|
{OFFSET(gpmc_a4), (MODE(7))}, /* gpio1[20] - #eMMC_RST */ |
||||||
|
{OFFSET(gpmc_a5), (MODE(7) | PULLUDDIS)}, /* gpio1[21] - #Z-Wave_RST */ |
||||||
|
{OFFSET(gpmc_a6), (MODE(7) | PULLUDDIS)}, /* gpio1[22] - ENOC_RST */ |
||||||
|
{OFFSET(gpmc_a7), (MODE(7) | PULLUP_EN)}, /* gpio1[23] - WIFI_MODE */ |
||||||
|
{OFFSET(gpmc_a8), (MODE(7) | RXACTIVE | PULLUDDIS)}, /* gpio1[24] - #BIDCOS_RST */ |
||||||
|
{OFFSET(gpmc_a9), (MODE(7) | RXACTIVE | PULLUDDIS)}, /* gpio1[25] - USR_BUTTON */ |
||||||
|
{OFFSET(gpmc_a10), (MODE(7) | RXACTIVE | PULLUDDIS)}, /* gpio1[26] - #USB1_OC */ |
||||||
|
{OFFSET(gpmc_a11), (MODE(7) | RXACTIVE | PULLUDDIS)}, /* gpio1[27] - BIDCOS_PROG */ |
||||||
|
{OFFSET(gpmc_be1n), (MODE(7) | PULLUP_EN)}, /* gpio1[28] - ZIGBEE_PC7 */ |
||||||
|
{OFFSET(gpmc_csn0), (MODE(7) | RXACTIVE | PULLUDDIS)}, /* gpio1[29] - RESET_BUTTON */ |
||||||
|
{OFFSET(gpmc_advn_ale), (MODE(7) | PULLUDDIS)}, /* gpio2[2] - LED_Cloud_RD */ |
||||||
|
{OFFSET(gpmc_oen_ren), (MODE(7) | PULLUDDIS | RXACTIVE)}, /* gpio2[3] - #WIFI_POR */ |
||||||
|
{OFFSET(gpmc_wen), (MODE(7) | PULLUDDIS)}, /* gpio2[4] - N/C */ |
||||||
|
{OFFSET(gpmc_be0n_cle), (MODE(7) | PULLUDDIS)}, /* gpio2[5] - EEPROM_WP */ |
||||||
|
{OFFSET(lcd_data0), (MODE(7) | PULLUDDIS)}, /* gpio2[6] */ |
||||||
|
{OFFSET(lcd_data1), (MODE(7) | PULLUDDIS)}, /* gpio2[7] */ |
||||||
|
{OFFSET(lcd_data2), (MODE(7) | PULLUDDIS)}, /* gpio2[8] */ |
||||||
|
{OFFSET(lcd_data3), (MODE(7) | PULLUDDIS)}, /* gpio2[9] */ |
||||||
|
{OFFSET(lcd_data4), (MODE(7) | PULLUDDIS)}, /* gpio2[10] */ |
||||||
|
{OFFSET(lcd_data5), (MODE(7) | PULLUDDIS)}, /* gpio2[11] */ |
||||||
|
{OFFSET(lcd_data6), (MODE(7) | PULLUDDIS)}, /* gpio2[12] */ |
||||||
|
{OFFSET(lcd_data7), (MODE(7) | PULLUDDIS)}, /* gpio2[13] */ |
||||||
|
{OFFSET(lcd_data8), (MODE(7) | PULLUDDIS)}, /* gpio2[14] */ |
||||||
|
{OFFSET(lcd_data9), (MODE(7) | PULLUDDIS)}, /* gpio2[15] */ |
||||||
|
{OFFSET(lcd_data10), (MODE(7) | PULLUDDIS)}, /* gpio2[16] */ |
||||||
|
{OFFSET(lcd_data11), (MODE(7) | PULLUDDIS)}, /* gpio2[17] */ |
||||||
|
{OFFSET(lcd_data12), (MODE(7) | PULLUDDIS)}, /* gpio0[8] */ |
||||||
|
{OFFSET(lcd_data13), (MODE(7) | PULLUDDIS)}, /* gpio0[9] */ |
||||||
|
{OFFSET(lcd_data14), (MODE(7) | PULLUDDIS)}, /* gpio0[10] */ |
||||||
|
{OFFSET(lcd_data15), (MODE(7) | PULLUDDIS)}, /* gpio0[11] */ |
||||||
|
{OFFSET(lcd_vsync), (MODE(7) | PULLUDDIS)}, /* gpio2[22] */ |
||||||
|
{OFFSET(lcd_hsync), (MODE(7) | PULLUDDIS)}, /* gpio2[23] */ |
||||||
|
{OFFSET(lcd_pclk), (MODE(7) | PULLUDDIS)}, /* gpio2[24] */ |
||||||
|
{OFFSET(lcd_ac_bias_en), (MODE(7) | PULLUDDIS)},/* gpio2[25] */ |
||||||
|
{OFFSET(spi0_d1), (MODE(7) | PULLUDDIS)}, /* gpio0[4] */ |
||||||
|
{OFFSET(spi0_cs0), (MODE(7) | PULLUDDIS)}, /* gpio0[5] */ |
||||||
|
{OFFSET(mcasp0_aclkr), (MODE(7) | PULLUDDIS)}, /* gpio3[18] - #ZIGBEE_RST */ |
||||||
|
{OFFSET(mcasp0_fsr), (MODE(7)) | PULLUDDIS}, /* gpio3[19] - ZIGBEE_BOOT */ |
||||||
|
{OFFSET(mcasp0_axr1), (MODE(7) | RXACTIVE)}, /* gpio3[19] - ZIGBEE_BOOT */ |
||||||
|
{OFFSET(mcasp0_ahclkx), (MODE(7) | RXACTIVE | PULLUP_EN)},/* gpio3[21] - ZIGBEE_PC5 */ |
||||||
|
{-1}, |
||||||
|
}; |
||||||
|
|
||||||
|
static struct module_pin_mux mii1_pin_mux[] = { |
||||||
|
{OFFSET(mii1_col), MODE(0) | RXACTIVE}, |
||||||
|
{OFFSET(mii1_crs), MODE(0) | RXACTIVE}, |
||||||
|
{OFFSET(mii1_rxerr), MODE(0) | RXACTIVE}, |
||||||
|
{OFFSET(mii1_txen), MODE(0)}, |
||||||
|
{OFFSET(mii1_rxdv), MODE(0) | RXACTIVE}, |
||||||
|
{OFFSET(mii1_txd3), MODE(0)}, |
||||||
|
{OFFSET(mii1_txd2), MODE(0)}, |
||||||
|
{OFFSET(mii1_txd1), MODE(0) | RXACTIVE}, |
||||||
|
{OFFSET(mii1_txd0), MODE(0) | RXACTIVE}, |
||||||
|
{OFFSET(mii1_txclk), MODE(0) | RXACTIVE}, |
||||||
|
{OFFSET(mii1_rxclk), MODE(0) | RXACTIVE}, |
||||||
|
{OFFSET(mii1_rxd3), MODE(0) | RXACTIVE}, |
||||||
|
{OFFSET(mii1_rxd2), MODE(0) | RXACTIVE}, |
||||||
|
{OFFSET(mii1_rxd1), MODE(0) | RXACTIVE}, |
||||||
|
{OFFSET(mii1_rxd0), MODE(0) | RXACTIVE}, |
||||||
|
{OFFSET(rmii1_refclk), MODE(7) | RXACTIVE}, |
||||||
|
{OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN}, |
||||||
|
{OFFSET(mdio_clk), MODE(0) | PULLUP_EN}, |
||||||
|
{-1}, |
||||||
|
}; |
||||||
|
|
||||||
|
static struct module_pin_mux pwm_pin_mux[] = { |
||||||
|
{OFFSET(gpmc_a3), (MODE(6) | PULLUDDIS)}, |
||||||
|
{-1}, |
||||||
|
}; |
||||||
|
|
||||||
|
void enable_uart0_pin_mux(void) |
||||||
|
{ |
||||||
|
configure_module_pin_mux(uart0_pin_mux); |
||||||
|
} |
||||||
|
|
||||||
|
void enable_uart1_pin_mux(void) |
||||||
|
{ |
||||||
|
configure_module_pin_mux(uart1_pin_mux); |
||||||
|
} |
||||||
|
|
||||||
|
void enable_uart2_pin_mux(void) |
||||||
|
{ |
||||||
|
configure_module_pin_mux(uart2_pin_mux); |
||||||
|
} |
||||||
|
|
||||||
|
void enable_uart3_pin_mux(void) |
||||||
|
{ |
||||||
|
} |
||||||
|
|
||||||
|
void enable_uart4_pin_mux(void) |
||||||
|
{ |
||||||
|
configure_module_pin_mux(uart4_pin_mux); |
||||||
|
} |
||||||
|
|
||||||
|
void enable_uart5_pin_mux(void) |
||||||
|
{ |
||||||
|
} |
||||||
|
|
||||||
|
void enable_i2c0_pin_mux(void) |
||||||
|
{ |
||||||
|
configure_module_pin_mux(i2c0_pin_mux); |
||||||
|
} |
||||||
|
|
||||||
|
void enable_shc_board_pwm_pin_mux(void) |
||||||
|
{ |
||||||
|
configure_module_pin_mux(pwm_pin_mux); |
||||||
|
} |
||||||
|
|
||||||
|
void enable_shc_board_pin_mux(void) |
||||||
|
{ |
||||||
|
/* Do board-specific muxes. */ |
||||||
|
if (board_is_c3_sample() || board_is_series()) { |
||||||
|
configure_module_pin_mux(mii1_pin_mux); |
||||||
|
configure_module_pin_mux(mmc0_pin_mux); |
||||||
|
configure_module_pin_mux(mmc1_pin_mux); |
||||||
|
configure_module_pin_mux(mmc2_pin_mux); |
||||||
|
configure_module_pin_mux(i2c0_pin_mux); |
||||||
|
configure_module_pin_mux(gpio0_7_pin_mux); |
||||||
|
configure_module_pin_mux(gpio_pin_mux); |
||||||
|
configure_module_pin_mux(uart1_pin_mux); |
||||||
|
configure_module_pin_mux(uart2_pin_mux); |
||||||
|
configure_module_pin_mux(uart4_pin_mux); |
||||||
|
configure_module_pin_mux(spi1_pin_mux); |
||||||
|
configure_module_pin_mux(jtag_pin_mux); |
||||||
|
} else { |
||||||
|
puts("Unknown board, cannot configure pinmux."); |
||||||
|
hang(); |
||||||
|
} |
||||||
|
} |
@ -0,0 +1,21 @@ |
|||||||
|
CONFIG_ARM=y |
||||||
|
CONFIG_TARGET_AM335X_SHC=y |
||||||
|
CONFIG_SERIES=y |
||||||
|
CONFIG_SPL_STACK_R_ADDR=0x82000000 |
||||||
|
CONFIG_SPL=y |
||||||
|
CONFIG_SPL_STACK_R=y |
||||||
|
CONFIG_FIT=y |
||||||
|
CONFIG_BOOTDELAY=0 |
||||||
|
CONFIG_HUSH_PARSER=y |
||||||
|
CONFIG_SYS_PROMPT="U-Boot# " |
||||||
|
CONFIG_AUTOBOOT_KEYED=y |
||||||
|
CONFIG_AUTOBOOT_PROMPT="Enter 'shc' to enter prompt (times out) %d \nEnter 'noautoboot' to enter prompt without timeout\n" |
||||||
|
CONFIG_AUTOBOOT_DELAY_STR="shc" |
||||||
|
CONFIG_AUTOBOOT_STOP_STR="noautoboot" |
||||||
|
# CONFIG_CMD_IMLS is not set |
||||||
|
# CONFIG_CMD_FLASH is not set |
||||||
|
CONFIG_CMD_MMC=y |
||||||
|
CONFIG_CMD_GPIO=y |
||||||
|
# CONFIG_CMD_SETEXPR is not set |
||||||
|
CONFIG_SYS_NS16550=y |
||||||
|
CONFIG_OF_LIBFDT=y |
@ -0,0 +1,21 @@ |
|||||||
|
CONFIG_ARM=y |
||||||
|
CONFIG_TARGET_AM335X_SHC=y |
||||||
|
CONFIG_SHC_ICT=y |
||||||
|
CONFIG_SERIES=y |
||||||
|
CONFIG_SPL_STACK_R_ADDR=0x82000000 |
||||||
|
CONFIG_SPL=y |
||||||
|
CONFIG_SPL_STACK_R=y |
||||||
|
CONFIG_FIT=y |
||||||
|
CONFIG_BOOTDELAY=0 |
||||||
|
CONFIG_SYS_PROMPT="U-Boot# " |
||||||
|
CONFIG_AUTOBOOT_KEYED=y |
||||||
|
CONFIG_AUTOBOOT_PROMPT="Enter 'shc' to enter prompt (times out) %d \nEnter 'noautoboot' to enter prompt without timeout\n" |
||||||
|
CONFIG_AUTOBOOT_DELAY_STR="shc" |
||||||
|
CONFIG_AUTOBOOT_STOP_STR="noautoboot" |
||||||
|
# CONFIG_CMD_IMLS is not set |
||||||
|
# CONFIG_CMD_FLASH is not set |
||||||
|
CONFIG_CMD_MMC=y |
||||||
|
CONFIG_CMD_GPIO=y |
||||||
|
# CONFIG_CMD_SETEXPR is not set |
||||||
|
CONFIG_SYS_NS16550=y |
||||||
|
CONFIG_OF_LIBFDT=y |
@ -0,0 +1,21 @@ |
|||||||
|
CONFIG_ARM=y |
||||||
|
CONFIG_TARGET_AM335X_SHC=y |
||||||
|
CONFIG_SHC_NETBOOT=y |
||||||
|
CONFIG_SERIES=y |
||||||
|
CONFIG_SPL_STACK_R_ADDR=0x82000000 |
||||||
|
CONFIG_SPL=y |
||||||
|
CONFIG_SPL_STACK_R=y |
||||||
|
CONFIG_FIT=y |
||||||
|
CONFIG_BOOTDELAY=0 |
||||||
|
CONFIG_SYS_PROMPT="U-Boot# " |
||||||
|
CONFIG_AUTOBOOT_KEYED=y |
||||||
|
CONFIG_AUTOBOOT_PROMPT="Enter 'shc' to enter prompt (times out) %d \nEnter 'noautoboot' to enter prompt without timeout\n" |
||||||
|
CONFIG_AUTOBOOT_DELAY_STR="shc" |
||||||
|
CONFIG_AUTOBOOT_STOP_STR="noautoboot" |
||||||
|
# CONFIG_CMD_IMLS is not set |
||||||
|
# CONFIG_CMD_FLASH is not set |
||||||
|
CONFIG_CMD_MMC=y |
||||||
|
CONFIG_CMD_GPIO=y |
||||||
|
# CONFIG_CMD_SETEXPR is not set |
||||||
|
CONFIG_SYS_NS16550=y |
||||||
|
CONFIG_OF_LIBFDT=y |
@ -0,0 +1,19 @@ |
|||||||
|
CONFIG_ARM=y |
||||||
|
CONFIG_TARGET_AM335X_SHC=y |
||||||
|
CONFIG_SERIES=y |
||||||
|
CONFIG_SPL_STACK_R_ADDR=0x82000000 |
||||||
|
CONFIG_SPL=y |
||||||
|
CONFIG_SPL_STACK_R=y |
||||||
|
CONFIG_FIT=y |
||||||
|
CONFIG_BOOTDELAY=5 |
||||||
|
CONFIG_AUTOBOOT_KEYED=y |
||||||
|
CONFIG_AUTOBOOT_PROMPT="Enter 'shc' to enter prompt (times out) %d \nEnter 'noautoboot' to enter prompt without timeout\n" |
||||||
|
CONFIG_AUTOBOOT_DELAY_STR="shc" |
||||||
|
CONFIG_AUTOBOOT_STOP_STR="noautoboot" |
||||||
|
# CONFIG_CMD_IMLS is not set |
||||||
|
# CONFIG_CMD_FLASH is not set |
||||||
|
CONFIG_CMD_MMC=y |
||||||
|
CONFIG_CMD_GPIO=y |
||||||
|
# CONFIG_CMD_SETEXPR is not set |
||||||
|
CONFIG_SYS_NS16550=y |
||||||
|
CONFIG_OF_LIBFDT=y |
@ -0,0 +1,21 @@ |
|||||||
|
CONFIG_ARM=y |
||||||
|
CONFIG_TARGET_AM335X_SHC=y |
||||||
|
CONFIG_SHC_SDBOOT=y |
||||||
|
CONFIG_SERIES=y |
||||||
|
CONFIG_SPL_STACK_R_ADDR=0x82000000 |
||||||
|
CONFIG_SPL=y |
||||||
|
CONFIG_SPL_STACK_R=y |
||||||
|
CONFIG_FIT=y |
||||||
|
CONFIG_BOOTDELAY=0 |
||||||
|
CONFIG_SYS_PROMPT="U-Boot# " |
||||||
|
CONFIG_AUTOBOOT_KEYED=y |
||||||
|
CONFIG_AUTOBOOT_PROMPT="Enter 'shc' to enter prompt (times out) %d \nEnter 'noautoboot' to enter prompt without timeout\n" |
||||||
|
CONFIG_AUTOBOOT_DELAY_STR="shc" |
||||||
|
CONFIG_AUTOBOOT_STOP_STR="noautoboot" |
||||||
|
# CONFIG_CMD_IMLS is not set |
||||||
|
# CONFIG_CMD_FLASH is not set |
||||||
|
CONFIG_CMD_MMC=y |
||||||
|
CONFIG_CMD_GPIO=y |
||||||
|
# CONFIG_CMD_SETEXPR is not set |
||||||
|
CONFIG_SYS_NS16550=y |
||||||
|
CONFIG_OF_LIBFDT=y |
@ -0,0 +1,21 @@ |
|||||||
|
CONFIG_ARM=y |
||||||
|
CONFIG_TARGET_AM335X_SHC=y |
||||||
|
CONFIG_SHC_SDBOOT=y |
||||||
|
CONFIG_SERIES=y |
||||||
|
CONFIG_SPL_STACK_R_ADDR=0x82000000 |
||||||
|
CONFIG_SPL=y |
||||||
|
CONFIG_SPL_STACK_R=y |
||||||
|
CONFIG_FIT=y |
||||||
|
CONFIG_BOOTDELAY=5 |
||||||
|
CONFIG_SYS_PROMPT="U-Boot# " |
||||||
|
CONFIG_AUTOBOOT_KEYED=y |
||||||
|
CONFIG_AUTOBOOT_PROMPT="Enter 'shc' to enter prompt (times out) %d \nEnter 'noautoboot' to enter prompt without timeout\n" |
||||||
|
CONFIG_AUTOBOOT_DELAY_STR="shc" |
||||||
|
CONFIG_AUTOBOOT_STOP_STR="noautoboot" |
||||||
|
# CONFIG_CMD_IMLS is not set |
||||||
|
# CONFIG_CMD_FLASH is not set |
||||||
|
CONFIG_CMD_MMC=y |
||||||
|
CONFIG_CMD_GPIO=y |
||||||
|
# CONFIG_CMD_SETEXPR is not set |
||||||
|
CONFIG_SYS_NS16550=y |
||||||
|
CONFIG_OF_LIBFDT=y |
@ -0,0 +1,340 @@ |
|||||||
|
/*
|
||||||
|
* (C) Copyright 2016 |
||||||
|
* Heiko Schocher, DENX Software Engineering, hs@denx.de. |
||||||
|
* |
||||||
|
* Based on: |
||||||
|
* am335x_evm.h |
||||||
|
* |
||||||
|
* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
|
||||||
|
* |
||||||
|
* SPDX-License-Identifier: GPL-2.0+ |
||||||
|
*/ |
||||||
|
|
||||||
|
#ifndef __CONFIG_AM335X_SHC_H |
||||||
|
#define __CONFIG_AM335X_SHC_H |
||||||
|
|
||||||
|
#include <configs/ti_am335x_common.h> |
||||||
|
|
||||||
|
/* settings we don;t want on this board */ |
||||||
|
#undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC |
||||||
|
#undef CONFIG_CMD_EXT4 |
||||||
|
#undef CONFIG_CMD_EXT4_WRITE |
||||||
|
#undef CONFIG_CMD_MMC_SPI |
||||||
|
#undef CONFIG_CMD_SPI |
||||||
|
#undef CONFIG_CMD_PXE |
||||||
|
|
||||||
|
#define CONFIG_CMD_CACHE |
||||||
|
|
||||||
|
#ifndef CONFIG_SPL_BUILD |
||||||
|
# define CONFIG_TIMESTAMP |
||||||
|
# define CONFIG_LZO |
||||||
|
#endif |
||||||
|
|
||||||
|
#define CONFIG_SYS_BOOTM_LEN (16 << 20) |
||||||
|
|
||||||
|
#define MACH_TYPE_BOSCH_SHC_B 9001 |
||||||
|
#define MACH_TYPE_BOSCH_SHC_B2 9002 |
||||||
|
#define MACH_TYPE_BOSCH_SHC_C 9003 |
||||||
|
#define MACH_TYPE_BOSCH_SHC_C2 9004 |
||||||
|
#define MACH_TYPE_BOSCH_SHC_C3 9005 |
||||||
|
#define MACH_TYPE_BOSCH_SHC 9006 |
||||||
|
#ifdef CONFIG_B_SAMPLE |
||||||
|
# define CONFIG_MACH_TYPE MACH_TYPE_BOSCH_SHC_B |
||||||
|
#elif defined CONFIG_B2_SAMPLE |
||||||
|
# define CONFIG_MACH_TYPE MACH_TYPE_BOSCH_SHC_B2 |
||||||
|
#elif defined CONFIG_C_SAMPLE |
||||||
|
# define CONFIG_MACH_TYPE MACH_TYPE_BOSCH_SHC_C |
||||||
|
#elif defined CONFIG_C2_SAMPLE |
||||||
|
# define CONFIG_MACH_TYPE MACH_TYPE_BOSCH_SHC_C2 |
||||||
|
#elif defined CONFIG_C3_SAMPLE |
||||||
|
# define CONFIG_MACH_TYPE MACH_TYPE_BOSCH_SHC_C3 |
||||||
|
#elif defined CONFIG_SERIES |
||||||
|
# define CONFIG_MACH_TYPE MACH_TYPE_BOSCH_SHC |
||||||
|
#endif /* #ifdef CONFIG_B_SAMPLE */ |
||||||
|
|
||||||
|
#define CONFIG_BOARD_LATE_INIT |
||||||
|
|
||||||
|
/* Clock Defines */ |
||||||
|
#define V_OSCK 24000000 /* Clock output from T2 */ |
||||||
|
#define V_SCLK (V_OSCK) |
||||||
|
|
||||||
|
#define CONFIG_VERSION_VARIABLE |
||||||
|
|
||||||
|
#define CONFIG_ENV_IS_IN_MMC 1 |
||||||
|
|
||||||
|
/*
|
||||||
|
* in case of SD Card or Network boot we want to have a possibility to |
||||||
|
* debrick the shc, therefore do not read environment from eMMC |
||||||
|
*/ |
||||||
|
#if defined(CONFIG_SHC_SDBOOT) || defined(CONFIG_SHC_NETBOOT) |
||||||
|
#define CONFIG_SYS_MMC_ENV_DEV 0 |
||||||
|
#else |
||||||
|
#define CONFIG_SYS_MMC_ENV_DEV 1 |
||||||
|
#endif |
||||||
|
|
||||||
|
/*
|
||||||
|
* Info when using boot partitions: As environment resides within first |
||||||
|
* 128 kB, MLO must start at 128 kB == 0x20000 |
||||||
|
* ENV at MMC Boot0 Partition - 0/Undefined=user, 1=boot0, 2=boot1, |
||||||
|
* 4..7=general0..3 |
||||||
|
*/ |
||||||
|
#define CONFIG_ENV_SIZE 0x1000 /* 4 KB */ |
||||||
|
#define CONFIG_ENV_OFFSET 0x7000 /* 28 kB */ |
||||||
|
|
||||||
|
#define CONFIG_HSMMC2_8BIT |
||||||
|
|
||||||
|
#define CONFIG_ENV_OFFSET_REDUND 0x9000 /* 36 kB */ |
||||||
|
#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE |
||||||
|
|
||||||
|
/* Enhance our eMMC support / experience. */ |
||||||
|
#define CONFIG_CMD_GPT |
||||||
|
#define CONFIG_EFI_PARTITION |
||||||
|
#ifdef CONFIG_SPL_BUILD |
||||||
|
#undef CONFIG_ISO_PARTITION |
||||||
|
#endif |
||||||
|
#ifndef CONFIG_SHC_ICT |
||||||
|
/*
|
||||||
|
* In builds other than ICT, reset to retry after timeout |
||||||
|
* Define a timeout after which a stopped bootloader continues autoboot |
||||||
|
* (only works with CONFIG_RESET_TO_RETRY) |
||||||
|
*/ |
||||||
|
# define CONFIG_BOOT_RETRY_TIME 30 |
||||||
|
# define CONFIG_RESET_TO_RETRY |
||||||
|
#endif |
||||||
|
|
||||||
|
#define CONFIG_ENV_VARS_UBOOT_CONFIG |
||||||
|
#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG |
||||||
|
|
||||||
|
#ifndef CONFIG_SPL_BUILD |
||||||
|
#define CONFIG_EXTRA_ENV_SETTINGS \ |
||||||
|
"loadaddr=0x80200000\0" \
|
||||||
|
"kloadaddr=0x84000000\0" \
|
||||||
|
"fdtaddr=0x85000000\0" \
|
||||||
|
"fdt_high=0xffffffff\0" \
|
||||||
|
"rdaddr=0x81000000\0" \
|
||||||
|
"bootfile=uImage\0" \
|
||||||
|
"fdtfile=am335x-shc.dtb\0" \
|
||||||
|
"verify=no\0" \
|
||||||
|
"serverip=10.55.152.184\0" \
|
||||||
|
"rootpath=/srv/nfs/shc-rootfs\0" \
|
||||||
|
"console=ttyO0,115200n8\0" \
|
||||||
|
"optargs=quiet\0" \
|
||||||
|
"mmcdev=1\0" \
|
||||||
|
"harakiri=0\0" \
|
||||||
|
"mmcpart=2\0" \
|
||||||
|
"active_root=root1\0" \
|
||||||
|
"inactive_root=root2\0" \
|
||||||
|
"mmcrootfstype=ext4 rootwait\0" \
|
||||||
|
"nfsopts=nolock\0" \
|
||||||
|
"static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \
|
||||||
|
"::off\0" \
|
||||||
|
"ip_method=none\0" \
|
||||||
|
"bootargs_defaults=setenv bootargs " \
|
||||||
|
"console=${console} " \
|
||||||
|
"${optargs}\0" \
|
||||||
|
"mmcargs=run bootargs_defaults;" \
|
||||||
|
"setenv bootargs ${bootargs} " \
|
||||||
|
"root=${mmcroot} " \
|
||||||
|
"rootfstype=${mmcrootfstype} ip=${ip_method}\0" \
|
||||||
|
"netargs=setenv bootargs console=${console} " \
|
||||||
|
"${optargs} " \
|
||||||
|
"root=/dev/nfs " \
|
||||||
|
"nfsroot=${serverip}:${rootpath},${nfsopts} rw " \
|
||||||
|
"ip=dhcp\0" \
|
||||||
|
"bootenv=uEnv.txt\0" \
|
||||||
|
"loadbootenv=if fatload mmc ${mmcdev} ${loadaddr} ${bootenv}; then " \
|
||||||
|
"echo Loaded environment from ${bootenv}; " \
|
||||||
|
"run importbootenv; " \
|
||||||
|
"fi;\0" \
|
||||||
|
"importbootenv=echo Importing environment variables from uEnv.txt ...; " \
|
||||||
|
"env import -t $loadaddr $filesize\0" \
|
||||||
|
"loaduimagefat=fatload mmc ${mmcdev} ${kloadaddr} ${bootfile}\0" \
|
||||||
|
"loaduimage=ext2load mmc ${mmcdev}:${mmcpart} ${kloadaddr} /boot/${bootfile}\0" \
|
||||||
|
"loadfdt=ext2load mmc ${mmcdev}:${mmcpart} ${fdtaddr} /boot/${fdtfile}\0" \
|
||||||
|
"netloaduimage=tftp ${loadaddr} ${bootfile}\0" \
|
||||||
|
"netloadfdt=tftp ${fdtaddr} ${fdtfile}\0" \
|
||||||
|
"mmcboot=echo Booting Linux from ${mmcdevice} ...; " \
|
||||||
|
"run mmcargs; " \
|
||||||
|
"if run loadfdt; then " \
|
||||||
|
"echo device tree detected; " \
|
||||||
|
"bootm ${kloadaddr} - ${fdtaddr}; " \
|
||||||
|
"else " \
|
||||||
|
"bootm ${kloadaddr}; " \
|
||||||
|
"fi; \0" \
|
||||||
|
"netboot=echo Booting from network ...; " \
|
||||||
|
"setenv autoload no; " \
|
||||||
|
"dhcp; " \
|
||||||
|
"run netloaduimage; " \
|
||||||
|
"run netargs; " \
|
||||||
|
"echo NFS path: ${serverip}:${rootpath};" \
|
||||||
|
"if run netloadfdt; then " \
|
||||||
|
"echo device tree detected; " \
|
||||||
|
"bootm ${loadaddr} - ${fdtaddr}; " \
|
||||||
|
"else " \
|
||||||
|
"bootm ${loadaddr}; " \
|
||||||
|
"fi; \0" \
|
||||||
|
"emmc_erase=if test ${harakiri} = 1 ; then echo erase emmc ...; setenv mmcdev 1; mmc erase 0 200; reset; fi; \0" \
|
||||||
|
"mmcpart_gp=mmcpart gp 1 40; \0" \
|
||||||
|
"mmcpart_enhance=mmcpart enhance 0 64; \0" \
|
||||||
|
"mmcpart_rel_write=mmcpart rel_write 1f; \0" \
|
||||||
|
"mmcpart_commit=mmcpart commit 1; \0" \
|
||||||
|
"mmc_hw_part=run mmcpart_gp; run mmcpart_enhance; run mmcpart_rel_write; run mmcpart_commit; \0" \
|
||||||
|
"led_success=gpio set 22; \0" \
|
||||||
|
"fusecmd=mmc dev 1; if mmcpart iscommitted; then echo HW Partitioning already committed; mmcpart list; else run mmc_hw_part; fi; run led_success; \0" \
|
||||||
|
"uenv_exec=if test -n $uenvcmd; then " \
|
||||||
|
"echo Running uenvcmd ...; " \
|
||||||
|
"run uenvcmd; " \
|
||||||
|
"fi;\0" \
|
||||||
|
"sd_setup=echo SD/MMC-Card detected on device 0; " \
|
||||||
|
"setenv mmcdevice SD; " \
|
||||||
|
"setenv mmcdev 0; " \
|
||||||
|
"setenv mmcpart 2; " \
|
||||||
|
"setenv mmcroot /dev/mmcblk${mmcdev}p${mmcpart};\0" \
|
||||||
|
"emmc_setup=echo eMMC detected on device 1; " \
|
||||||
|
"setenv mmcdevice eMMC; " \
|
||||||
|
"setenv mmcdev 1; " \
|
||||||
|
"run emmc_erase; " \
|
||||||
|
"if test ${active_root} = root2; then " \
|
||||||
|
"echo Active root is partition 6 (root2); " \
|
||||||
|
"setenv mmcpart 6; " \
|
||||||
|
"else " \
|
||||||
|
"echo Active root is partition 5 (root1); " \
|
||||||
|
"setenv mmcpart 5; " \
|
||||||
|
"fi; " \
|
||||||
|
"setenv mmcroot /dev/mmcblk${mmcdev}p${mmcpart};\0" |
||||||
|
#endif /* #ifndef CONFIG_SPL_BUILD */ |
||||||
|
|
||||||
|
#if defined CONFIG_SHC_NETBOOT |
||||||
|
/* Network Boot */ |
||||||
|
# define CONFIG_BOOTCOMMAND \ |
||||||
|
"run fusecmd; " \
|
||||||
|
"if run netboot; then " \
|
||||||
|
"echo Booting from network; " \
|
||||||
|
"else " \
|
||||||
|
"echo ERROR: Cannot boot from network!; " \
|
||||||
|
"panic; " \
|
||||||
|
"fi; " |
||||||
|
|
||||||
|
#elif defined CONFIG_SHC_SDBOOT /* !defined CONFIG_SHC_NETBOOT */ |
||||||
|
/* SD-Card Boot */ |
||||||
|
# define CONFIG_BOOTCOMMAND \ |
||||||
|
"if mmc dev 0; mmc rescan; then " \
|
||||||
|
"run sd_setup; " \
|
||||||
|
"else " \
|
||||||
|
"echo ERROR: SD/MMC-Card not detected!; " \
|
||||||
|
"panic; " \
|
||||||
|
"fi; " \
|
||||||
|
"if run loaduimage; then " \
|
||||||
|
"echo Bootable SD/MMC-Card inserted, booting from it!; " \
|
||||||
|
"run mmcboot; " \
|
||||||
|
"else " \
|
||||||
|
"echo ERROR: Unable to load uImage from SD/MMC-Card!; " \
|
||||||
|
"panic; " \
|
||||||
|
"fi; " |
||||||
|
|
||||||
|
#elif defined CONFIG_SHC_ICT |
||||||
|
/* ICT adapter boots only u-boot and does HW partitioning */ |
||||||
|
# define CONFIG_BOOTCOMMAND \ |
||||||
|
"if mmc dev 0; mmc rescan; then " \
|
||||||
|
"run sd_setup; " \
|
||||||
|
"else " \
|
||||||
|
"echo ERROR: SD/MMC-Card not detected!; " \
|
||||||
|
"panic; " \
|
||||||
|
"fi; " \
|
||||||
|
"run fusecmd; " |
||||||
|
|
||||||
|
#else /* !defined CONFIG_SHC_NETBOOT, !defined CONFIG_SHC_SDBOOT */ |
||||||
|
/* Regular Boot from internal eMMC */ |
||||||
|
# define CONFIG_BOOTCOMMAND \ |
||||||
|
"if mmc dev 1; mmc rescan; then " \
|
||||||
|
"run emmc_setup; " \
|
||||||
|
"else " \
|
||||||
|
"echo ERROR: eMMC device not detected!; " \
|
||||||
|
"panic; " \
|
||||||
|
"fi; " \
|
||||||
|
"if run loaduimage; then " \
|
||||||
|
"run mmcboot; " \
|
||||||
|
"else " \
|
||||||
|
"echo ERROR Unable to load uImage from eMMC!; " \
|
||||||
|
"echo Performing Rollback!; " \
|
||||||
|
"setenv _active_ ${active_root}; " \
|
||||||
|
"setenv _inactive_ ${inactive_root}; " \
|
||||||
|
"setenv active_root ${_inactive_}; " \
|
||||||
|
"setenv inactive_root ${_active_}; " \
|
||||||
|
"saveenv; " \
|
||||||
|
"reset; " \
|
||||||
|
"fi; " |
||||||
|
|
||||||
|
#endif /* Regular Boot */ |
||||||
|
|
||||||
|
/* NS16550 Configuration */ |
||||||
|
#define CONFIG_SYS_NS16550_COM1 0x44e09000 /* UART0 */ |
||||||
|
#define CONFIG_SYS_NS16550_COM2 0x48022000 /* UART1 */ |
||||||
|
#define CONFIG_SYS_NS16550_COM3 0x48024000 /* UART2 */ |
||||||
|
#define CONFIG_SYS_NS16550_COM4 0x481a6000 /* UART3 */ |
||||||
|
#define CONFIG_SYS_NS16550_COM5 0x481a8000 /* UART4 */ |
||||||
|
#define CONFIG_SYS_NS16550_COM6 0x481aa000 /* UART5 */ |
||||||
|
#define CONFIG_BAUDRATE 115200 |
||||||
|
#define CONFIG_CONS_INDEX 1 |
||||||
|
|
||||||
|
/* PMIC support */ |
||||||
|
#define CONFIG_POWER_TPS65217 |
||||||
|
|
||||||
|
/* SPL */ |
||||||
|
#define CONFIG_SPL_POWER_SUPPORT |
||||||
|
#define CONFIG_SPL_YMODEM_SUPPORT |
||||||
|
|
||||||
|
#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds" |
||||||
|
|
||||||
|
#ifndef CONFIG_SPL_USBETH_SUPPORT |
||||||
|
/* To support eMMC booting */ |
||||||
|
#define CONFIG_STORAGE_EMMC |
||||||
|
#define CONFIG_FASTBOOT_FLASH_MMC_DEV 1 |
||||||
|
#endif |
||||||
|
|
||||||
|
/*
|
||||||
|
* Disable MMC DM for SPL build and can be re-enabled after adding |
||||||
|
* DM support in SPL |
||||||
|
*/ |
||||||
|
#ifdef CONFIG_SPL_BUILD |
||||||
|
#undef CONFIG_DM_MMC |
||||||
|
#undef CONFIG_TIMER |
||||||
|
#endif |
||||||
|
|
||||||
|
#define CONFIG_CMD_DHCP |
||||||
|
#define CONFIG_CMD_PING |
||||||
|
#define CONFIG_DRIVER_TI_CPSW |
||||||
|
#define CONFIG_MII |
||||||
|
#define CONFIG_BOOTP_DEFAULT |
||||||
|
#define CONFIG_BOOTP_DNS |
||||||
|
#define CONFIG_BOOTP_DNS2 |
||||||
|
#define CONFIG_BOOTP_SEND_HOSTNAME |
||||||
|
#define CONFIG_BOOTP_GATEWAY |
||||||
|
#define CONFIG_BOOTP_SUBNETMASK |
||||||
|
#define CONFIG_NET_RETRY_COUNT 10 |
||||||
|
#define CONFIG_NET_MULTI |
||||||
|
#define CONFIG_PHY_GIGE |
||||||
|
#define CONFIG_PHYLIB |
||||||
|
#define CONFIG_PHY_ADDR 0 |
||||||
|
#define CONFIG_PHY_SMSC |
||||||
|
|
||||||
|
/* I2C configuration */ |
||||||
|
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */ |
||||||
|
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 |
||||||
|
#define CONFIG_SYS_I2C_SPEED 400000 |
||||||
|
#define CONFIG_SYS_I2C_SLAVE 1 |
||||||
|
|
||||||
|
#define CONFIG_SHOW_BOOT_PROGRESS |
||||||
|
|
||||||
|
#if defined CONFIG_SHC_NETBOOT |
||||||
|
#ifdef CONFIG_SPL_BUILD |
||||||
|
#define CONFIG_SPL_NET_SUPPORT |
||||||
|
#define CONFIG_SPL_ETH_SUPPORT |
||||||
|
#define CONFIG_SPL_NET_VCI_STRING "AM335x U-Boot SPL" |
||||||
|
#define CONFIG_SPL_ENV_SUPPORT |
||||||
|
#define CONFIG_SPL_MMC_SUPPORT |
||||||
|
#define CONFIG_ENV_IS_NOWHERE |
||||||
|
#undef CONFIG_ENV_IS_IN_MMC |
||||||
|
#endif |
||||||
|
#endif |
||||||
|
#endif /* ! __CONFIG_AM335X_SHC_H */ |
Loading…
Reference in new issue