OMAP3: updated pinmux and environment for new revision of mcx board

The mcx board was slightly modified and the pinmux must be updated.
There is no need to support the old board, that becomes obsolete.

Signed-off-by: Stefano Babic <sbabic@denx.de>

board/htkw/mcx/mcx.h

@@ -143,28 +143,28 @@ const omap3_sysinfo sysinfo = {
 	MUX_VAL(CP(DSS_HSYNC),		(IDIS | PTD | DIS | M0)) \
 	MUX_VAL(CP(DSS_VSYNC),		(IDIS | PTD | DIS | M0)) \
 	MUX_VAL(CP(DSS_ACBIAS),		(IDIS | PTD | DIS | M0)) \
-	MUX_VAL(CP(DSS_DATA0),		(IEN | PTU | EN  | M4))\
+	MUX_VAL(CP(DSS_DATA0),		(IDIS | PTD | DIS | M0)) \
-	MUX_VAL(CP(DSS_DATA1),		(IEN | PTU | EN  | M4)) \
+	MUX_VAL(CP(DSS_DATA1),		(IDIS | PTD | DIS | M0)) \
-	MUX_VAL(CP(DSS_DATA2),		(IEN | PTU | EN  | M4)) \
+	MUX_VAL(CP(DSS_DATA2),		(IDIS | PTD | DIS | M0)) \
 	MUX_VAL(CP(DSS_DATA3),		(IDIS | PTD | DIS | M0)) \
 	MUX_VAL(CP(DSS_DATA4),		(IDIS | PTD | DIS | M0)) \
 	MUX_VAL(CP(DSS_DATA5),		(IDIS | PTD | DIS | M0)) \
 	MUX_VAL(CP(DSS_DATA6),		(IDIS | PTD | DIS | M0)) \
 	MUX_VAL(CP(DSS_DATA7),		(IDIS | PTD | DIS | M0)) \
-	MUX_VAL(CP(DSS_DATA8),		(IEN | PTU | EN  | M4)) \
+	MUX_VAL(CP(DSS_DATA8),		(IDIS | PTD | DIS | M0)) \
-	MUX_VAL(CP(DSS_DATA9),		(IEN | PTU | EN  | M4)) \
+	MUX_VAL(CP(DSS_DATA9),		(IDIS | PTD | DIS | M0)) \
 	MUX_VAL(CP(DSS_DATA10),		(IDIS | PTD | DIS | M0)) \
 	MUX_VAL(CP(DSS_DATA11),		(IDIS | PTD | DIS | M0)) \
 	MUX_VAL(CP(DSS_DATA12),		(IDIS | PTD | DIS | M0)) \
 	MUX_VAL(CP(DSS_DATA13),		(IDIS | PTD | DIS | M0)) \
 	MUX_VAL(CP(DSS_DATA14),		(IDIS | PTD | DIS | M0)) \
-	MUX_VAL(CP(DSS_DATA15),		(IDIS | PTD | DIS | M0))\
+	MUX_VAL(CP(DSS_DATA15),		(IDIS | PTD | DIS | M0)) \
-	MUX_VAL(CP(DSS_DATA16),		(IEN | PTU | EN  | M4)) \
+	MUX_VAL(CP(DSS_DATA16),		(IDIS | PTD | DIS | M0)) \
-	MUX_VAL(CP(DSS_DATA17),		(IEN | PTU | EN  | M4)) \
+	MUX_VAL(CP(DSS_DATA17),		(IDIS | PTD | DIS | M0)) \
-	MUX_VAL(CP(DSS_DATA18),		(IEN | PTU | EN  | M4)) \
+	MUX_VAL(CP(DSS_DATA18),		(IDIS | PTD | DIS | M0)) \
 	MUX_VAL(CP(DSS_DATA19),		(IDIS | PTD | DIS | M0)) \
 	MUX_VAL(CP(DSS_DATA20),		(IDIS | PTD | DIS | M0)) \
-	MUX_VAL(CP(DSS_DATA21),		(IDIS | PTD | DIS | M0))  \
+	MUX_VAL(CP(DSS_DATA21),		(IDIS | PTD | DIS | M0)) \
 	MUX_VAL(CP(DSS_DATA22),		(IDIS | PTD | DIS | M0)) \
 	MUX_VAL(CP(DSS_DATA23),		(IDIS | PTD | DIS | M0)) \
 	/* CAMERA */\
@@ -313,11 +313,11 @@ const omap3_sysinfo sysinfo = {
 	MUX_VAL(CP(RMII_TXEN),		(PTD | M0)) \
 	MUX_VAL(CP(RMII_50MHZ_CLK),	(IEN  | PTD | EN  | M0)) \
 	/* HECC */\
-	MUX_VAL(CP(HECC1_TXD),		(IEN  | PTD | EN  | M4)) \
+	MUX_VAL(CP(HECC1_TXD),		(IEN  | PTD | EN  | M0)) \
-	MUX_VAL(CP(HECC1_RXD),		(IEN  | PTD | EN  | M4)) \
+	MUX_VAL(CP(HECC1_RXD),		(IEN  | PTD | EN  | M0)) \
 	/* HSUSB */\
 	MUX_VAL(CP(HSUSB0_CLK),		(IEN  | PTD | DIS | M0)) \
-	MUX_VAL(CP(HSUSB0_STP),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(HSUSB0_STP),		(IEN  | PTU | DIS  | M0)) \
 	MUX_VAL(CP(HSUSB0_DIR),		(IEN  | PTD | DIS | M0)) \
 	MUX_VAL(CP(HSUSB0_NXT),		(IEN  | PTD | DIS | M0)) \
 	MUX_VAL(CP(HSUSB0_DATA0),	(IEN  | PTD | DIS | M0)) \

include/configs/mcx.h

@@ -256,22 +256,24 @@
 		"run nandargs; "					\
 		"ubi part nand0,4;"					\
 		"ubi readvol ${loadaddr} kernel;"			\
-		"run addip addtty addmtd addfb addeth addmisc;"		\
+		"run addtty addmtd addfb addeth addmisc;"		\
 		"bootm ${loadaddr}\0"					\
-	"swupdate_args=setenv bootargs ubi.mtd=6 root=ubi0:fs_recovery "\
+	"swupdate_args=setenv bootargs root=/dev/ram "			\
-		"rootfstype=ubifs quiet loglevel=1 "			\
+		"quiet loglevel=1 "					\
-			"consoleblank=0 ${swupdate_misc}\0"		\
+		"consoleblank=0 ${swupdate_misc}\0"			\
 	"swupdate=echo Running Sw-Update...;"				\
 		"if printenv mtdparts;then echo Starting SwUpdate...; "	\
 		"else mtdparts default;fi; "				\
 		"ubi part nand0,5;"					\
 		"ubi readvol 0x82000000 kernel_recovery;"		\
+		"ubi part nand0,6;"					\
+		"ubi readvol 0x84000000 fs_recovery;"			\
 		"run swupdate_args; "					\
 		"setenv bootargs ${bootargs} "				\
 			"${mtdparts} "					\
 			"vram=6M omapfb.vram=1:2M,2:2M,3:2M "		\
 			"omapdss.def_disp=lcd;"				\
-		"bootm ${loadaddr}\0"
+		"bootm 0x82000000 0x84000000\0"
 
 #define CONFIG_BOOTCOMMAND \
 	"run nandboot"