Wolfgang Denk
18 years ago
committed by
Wolfgang Denk
commit
f11033e739
@ -0,0 +1,47 @@ |
|||||||
|
#
|
||||||
|
# (C) Copyright 2000
|
||||||
|
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
||||||
|
#
|
||||||
|
# See file CREDITS for list of people who contributed to this
|
||||||
|
# project.
|
||||||
|
#
|
||||||
|
# This program is free software; you can redistribute it and/or
|
||||||
|
# modify it under the terms of the GNU General Public License as
|
||||||
|
# published by the Free Software Foundation; either version 2 of
|
||||||
|
# the License, or (at your option) any later version.
|
||||||
|
#
|
||||||
|
# This program is distributed in the hope that it will be useful,
|
||||||
|
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
# GNU General Public License for more details.
|
||||||
|
#
|
||||||
|
# You should have received a copy of the GNU General Public License
|
||||||
|
# along with this program; if not, write to the Free Software
|
||||||
|
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||||
|
# MA 02111-1307 USA
|
||||||
|
#
|
||||||
|
|
||||||
|
include $(TOPDIR)/config.mk |
||||||
|
|
||||||
|
LIB = lib$(BOARD).a
|
||||||
|
|
||||||
|
OBJS = $(BOARD).o sc3nand.o
|
||||||
|
SOBJS = init.o
|
||||||
|
|
||||||
|
$(LIB): $(OBJS) $(SOBJS) |
||||||
|
$(AR) crv $@ $^
|
||||||
|
|
||||||
|
clean: |
||||||
|
rm -f $(SOBJS) $(OBJS)
|
||||||
|
|
||||||
|
distclean: clean |
||||||
|
rm -f $(LIB) core *.bak .depend
|
||||||
|
|
||||||
|
#########################################################################
|
||||||
|
|
||||||
|
.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) |
||||||
|
$(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
|
||||||
|
|
||||||
|
sinclude .depend |
||||||
|
|
||||||
|
#########################################################################
|
||||||
@ -0,0 +1,24 @@ |
|||||||
|
#
|
||||||
|
# (C) Copyright 2000
|
||||||
|
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
||||||
|
#
|
||||||
|
# See file CREDITS for list of people who contributed to this
|
||||||
|
# project.
|
||||||
|
#
|
||||||
|
# This program is free software; you can redistribute it and/or
|
||||||
|
# modify it under the terms of the GNU General Public License as
|
||||||
|
# published by the Free Software Foundation; either version 2 of
|
||||||
|
# the License, or (at your option) any later version.
|
||||||
|
#
|
||||||
|
# This program is distributed in the hope that it will be useful,
|
||||||
|
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
# GNU General Public License for more details.
|
||||||
|
#
|
||||||
|
# You should have received a copy of the GNU General Public License
|
||||||
|
# along with this program; if not, write to the Free Software
|
||||||
|
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||||
|
# MA 02111-1307 USA
|
||||||
|
#
|
||||||
|
|
||||||
|
TEXT_BASE = 0xFFFC0000
|
||||||
@ -0,0 +1,382 @@ |
|||||||
|
/*------------------------------------------------------------------------------+ |
||||||
|
* |
||||||
|
* This souce code has been made available to you by EuroDesign |
||||||
|
* (www.eurodsn.de). It's based on the original IBM source code, so |
||||||
|
* this follows: |
||||||
|
* |
||||||
|
* This source code has been made available to you by IBM on an AS-IS |
||||||
|
* basis. Anyone receiving this source is licensed under IBM |
||||||
|
* copyrights to use it in any way he or she deems fit, including |
||||||
|
* copying it, modifying it, compiling it, and redistributing it either |
||||||
|
* with or without modifications. No license under IBM patents or |
||||||
|
* patent applications is to be implied by the copyright license. |
||||||
|
* |
||||||
|
* Any user of this software should understand that IBM cannot provide |
||||||
|
* technical support for this software and will not be responsible for |
||||||
|
* any consequences resulting from the use of this software. |
||||||
|
* |
||||||
|
* Any person who transfers this source code or any derivative work |
||||||
|
* must include the IBM copyright notice, this paragraph, and the |
||||||
|
* preceding two paragraphs in the transferred software. |
||||||
|
* |
||||||
|
* COPYRIGHT I B M CORPORATION 1995 |
||||||
|
* LICENSED MATERIAL - PROGRAM PROPERTY OF I B M |
||||||
|
*------------------------------------------------------------------------------- */ |
||||||
|
|
||||||
|
#include <config.h> |
||||||
|
#include <ppc4xx.h> |
||||||
|
|
||||||
|
#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */ |
||||||
|
|
||||||
|
#include <ppc_asm.tmpl> |
||||||
|
#include <ppc_defs.h> |
||||||
|
|
||||||
|
#include <asm/cache.h> |
||||||
|
#include <asm/mmu.h> |
||||||
|
|
||||||
|
/** |
||||||
|
* ext_bus_cntlr_init - Initializes the External Bus Controller for the external peripherals |
||||||
|
* |
||||||
|
* IMPORTANT: For pass1 this code must run from cache since you can not |
||||||
|
* reliably change a peripheral banks timing register (pbxap) while running |
||||||
|
* code from that bank. For ex., since we are running from ROM on bank 0, we |
||||||
|
* can NOT execute the code that modifies bank 0 timings from ROM, so |
||||||
|
* we run it from cache. |
||||||
|
* |
||||||
|
* Bank 0 - Boot-Flash |
||||||
|
* Bank 1 - NAND-Flash |
||||||
|
* Bank 2 - ISA bus |
||||||
|
* Bank 3 - Second Flash |
||||||
|
* Bank 4 - USB controller |
||||||
|
*/ |
||||||
|
.globl ext_bus_cntlr_init
|
||||||
|
ext_bus_cntlr_init: |
||||||
|
/* |
||||||
|
* We need the current boot up configuration to set correct |
||||||
|
* timings into internal flash and external flash |
||||||
|
*/ |
||||||
|
mfdcr r24,strap /* xxxx xxxx xxxx xxx? ?xxx xxxx xxxx xxxx |
||||||
|
0 0 -> 8 bit external ROM |
||||||
|
0 1 -> 16 bit internal ROM */ |
||||||
|
addi r4,0,2 |
||||||
|
srw r24,r24,r4 /* shift right r24 two positions */ |
||||||
|
andi. r24,r24,0x06000 |
||||||
|
/* |
||||||
|
* All calculations are based on 33MHz EBC clock. |
||||||
|
* |
||||||
|
* First, create a "very slow" timing (~250ns) with burst mode enabled |
||||||
|
* This is need for the external flash access |
||||||
|
*/ |
||||||
|
lis r25,0x0800 |
||||||
|
ori r25,r25,0x0280 /* 0000 1000 0xxx 0000 0000 0010 100x xxxx = 0x03800280 |
||||||
|
/* |
||||||
|
* Second, create a fast timing: |
||||||
|
* 90ns first cycle - 3 clock access |
||||||
|
* and 90ns burst cycle, plus 1 clock after the last access |
||||||
|
* This is used for the internal access |
||||||
|
*/ |
||||||
|
lis r26,0x8900 |
||||||
|
ori r26,r26,0x0280 /* 1000 1001 0xxx 0000 0000 0010 100x xxxx |
||||||
|
/* |
||||||
|
* We can't change settings on CS# if we currently use them. |
||||||
|
* -> load a few instructions into cache and run this code from cache |
||||||
|
*/ |
||||||
|
mflr r4 /* save link register */ |
||||||
|
bl ..getAddr |
||||||
|
..getAddr: |
||||||
|
mflr r3 /* get address of ..getAddr */ |
||||||
|
mtlr r4 /* restore link register */ |
||||||
|
addi r4,0,14 /* set ctr to 10; used to prefetch */
|
||||||
|
mtctr r4 /* 10 cache lines to fit this function |
||||||
|
in cache (gives us 8x10=80 instructions) */ |
||||||
|
..ebcloop: |
||||||
|
icbt r0,r3 /* prefetch cache line for addr in r3 */ |
||||||
|
addi r3,r3,32 /* move to next cache line */ |
||||||
|
bdnz ..ebcloop /* continue for 10 cache lines */ |
||||||
|
/* |
||||||
|
* Delay to ensure all accesses to ROM are complete before changing |
||||||
|
* bank 0 timings. 200usec should be enough. |
||||||
|
* 200,000,000 (cycles/sec) X .000200 (sec) = 0x9C40 cycles |
||||||
|
*/ |
||||||
|
lis r3,0x0 |
||||||
|
ori r3,r3,0xA000 /* ensure 200usec have passed since reset */ |
||||||
|
mtctr r3 |
||||||
|
..spinlp: |
||||||
|
bdnz ..spinlp /* spin loop */ |
||||||
|
|
||||||
|
/*----------------------------------------------------------------------- |
||||||
|
* Memory Bank 0 (BOOT-ROM) initialization |
||||||
|
* 0xFFEF00000....0xFFFFFFF |
||||||
|
* We only have to change the timing. Mapping is ok by boot-strapping |
||||||
|
*----------------------------------------------------------------------- */ |
||||||
|
|
||||||
|
li r4,pb0ap /* PB0AP=Peripheral Bank 0 Access Parameters */ |
||||||
|
mtdcr ebccfga,r4 |
||||||
|
|
||||||
|
mr r4,r26 /* assume internal fast flash is boot flash */ |
||||||
|
cmpwi r24,0x2000 /* assumption true? ... */ |
||||||
|
beq 1f /* ...yes! */ |
||||||
|
mr r4,r25 /* ...no, use the slow variant */ |
||||||
|
mr r25,r26 /* use this for the other flash */ |
||||||
|
1: |
||||||
|
mtdcr ebccfgd,r4 /* change timing now */ |
||||||
|
|
||||||
|
li r4,pb0cr /* PB0CR=Peripheral Bank 0 Control Register */ |
||||||
|
mtdcr ebccfga,r4 |
||||||
|
mfdcr r4,ebccfgd |
||||||
|
lis r3,0x0001 |
||||||
|
ori r3,r3,0x8000 /* allow reads and writes */ |
||||||
|
or r4,r4,r3 |
||||||
|
mtdcr ebccfgd,r4 |
||||||
|
|
||||||
|
/*----------------------------------------------------------------------- |
||||||
|
* Memory Bank 3 (Second-Flash) initialization |
||||||
|
* 0xF0000000...0xF01FFFFF -> 2MB |
||||||
|
*----------------------------------------------------------------------- */ |
||||||
|
|
||||||
|
li r4,pb3ap /* Peripheral Bank 1 Access Parameter */ |
||||||
|
mtdcr ebccfga,r4 |
||||||
|
mtdcr ebccfgd,r2 /* change timing */ |
||||||
|
|
||||||
|
li r4,pb3cr /* Peripheral Bank 1 Configuration Registers */ |
||||||
|
mtdcr ebccfga,r4 |
||||||
|
|
||||||
|
lis r4,0xF003 |
||||||
|
ori r4,r4,0x8000 |
||||||
|
/* |
||||||
|
* Consider boot configuration |
||||||
|
*/ |
||||||
|
xori r24,r24,0x2000 /* invert current bus width */ |
||||||
|
or r4,r4,r24 |
||||||
|
mtdcr ebccfgd,r4 |
||||||
|
|
||||||
|
/*----------------------------------------------------------------------- |
||||||
|
* Memory Bank 1 (NAND-Flash) initialization |
||||||
|
* 0x77D00000...0x77DFFFFF -> 1MB |
||||||
|
* - the write/read pulse to the NAND can be as short as 25ns, bus the cycle time is always 50ns |
||||||
|
* - the setup time is 0ns |
||||||
|
* - the hold time is 15ns |
||||||
|
* -> |
||||||
|
* - TWT = 0 |
||||||
|
* - CSN = 0 |
||||||
|
* - OEN = 0 |
||||||
|
* - WBN = 0 |
||||||
|
* - WBF = 0 |
||||||
|
* - TH = 1 |
||||||
|
* ----> 2 clocks per cycle = 60ns cycle (30ns active, 30ns hold) |
||||||
|
*----------------------------------------------------------------------- */ |
||||||
|
|
||||||
|
li r4,pb1ap /* Peripheral Bank 1 Access Parameter */ |
||||||
|
mtdcr ebccfga,r4 |
||||||
|
|
||||||
|
lis r4,0x0000 |
||||||
|
ori r4,r4,0x0200 |
||||||
|
mtdcr ebccfgd,r4 |
||||||
|
|
||||||
|
li r4,pb1cr /* Peripheral Bank 1 Configuration Registers */ |
||||||
|
mtdcr ebccfga,r4 |
||||||
|
|
||||||
|
lis r4,0x77D1 |
||||||
|
ori r4,r4,0x8000 |
||||||
|
mtdcr ebccfgd,r4 |
||||||
|
|
||||||
|
|
||||||
|
/* USB init (without acceleration) */ |
||||||
|
#ifndef CONFIG_ISP1161_PRESENT |
||||||
|
li r4,pb4ap /* PB4AP=Peripheral Bank 4 Access Parameters */ |
||||||
|
mtdcr ebccfga,r4 |
||||||
|
lis r4,0x0180 |
||||||
|
ori r4,r4,0x5940 |
||||||
|
mtdcr ebccfgd,r4 |
||||||
|
#endif |
||||||
|
|
||||||
|
/*----------------------------------------------------------------------- |
||||||
|
* Memory Bank 2 (ISA Access) initialization (plus memory bank 6 and 7) |
||||||
|
* 0x78000000...0x7BFFFFFF -> 64 MB |
||||||
|
* Wir arbeiten bei 33 MHz -> 30ns |
||||||
|
*----------------------------------------------------------------------- |
||||||
|
|
||||||
|
A7 (ppc notation) or A24 (standard notation) decides about |
||||||
|
the type of access: |
||||||
|
A7/A24=0 -> memory cycle |
||||||
|
A7/ /A24=1 -> I/O cycle |
||||||
|
*/ |
||||||
|
li r4,pb2ap /* PB2AP=Peripheral Bank 2 Access Parameters */ |
||||||
|
mtdcr ebccfga,r4 |
||||||
|
/* |
||||||
|
We emulate an ISA access |
||||||
|
|
||||||
|
1. Address active |
||||||
|
2. wait 0 EBC clocks -> CSN=0 |
||||||
|
3. set CS# |
||||||
|
4. wait 0 EBC clock -> OEN/WBN=0 |
||||||
|
5. set OE#/WE# |
||||||
|
6. wait 4 clocks (ca. 90ns) and for Ready signal |
||||||
|
7. hold for 4 clocks -> TH=4 |
||||||
|
*/ |
||||||
|
|
||||||
|
#if 1 |
||||||
|
/* faster access to isa-bus */ |
||||||
|
lis r4,0x0180 |
||||||
|
ori r4,r4,0x5940 |
||||||
|
#else |
||||||
|
lis r4,0x0100 |
||||||
|
ori r4,r4,0x0340 |
||||||
|
#endif |
||||||
|
mtdcr ebccfgd,r4 |
||||||
|
|
||||||
|
#ifdef IDE_USES_ISA_EMULATION |
||||||
|
li r25,pb5ap /* PB5AP=Peripheral Bank 5 Access Parameters */ |
||||||
|
mtdcr ebccfga,r25 |
||||||
|
mtdcr ebccfgd,r4 |
||||||
|
#endif |
||||||
|
|
||||||
|
li r25,pb6ap /* PB6AP=Peripheral Bank 6 Access Parameters */ |
||||||
|
mtdcr ebccfga,r25 |
||||||
|
mtdcr ebccfgd,r4 |
||||||
|
li r25,pb7ap /* PB7AP=Peripheral Bank 7 Access Parameters */ |
||||||
|
mtdcr ebccfga,r25 |
||||||
|
mtdcr ebccfgd,r4 |
||||||
|
|
||||||
|
li r25,pb2cr /* PB2CR=Peripheral Bank 2 Configuration Register */ |
||||||
|
mtdcr ebccfga,r25 |
||||||
|
|
||||||
|
lis r4,0x780B |
||||||
|
ori r4,r4,0xA000 |
||||||
|
mtdcr ebccfgd,r4 |
||||||
|
/* |
||||||
|
* the other areas are only 1MiB in size |
||||||
|
*/ |
||||||
|
lis r4,0x7401 |
||||||
|
ori r4,r4,0xA000 |
||||||
|
|
||||||
|
li r25,pb6cr /* PB6CR=Peripheral Bank 6 Configuration Register */ |
||||||
|
mtdcr ebccfga,r25 |
||||||
|
lis r4,0x7401 |
||||||
|
ori r4,r4,0xA000 |
||||||
|
mtdcr ebccfgd,r4 |
||||||
|
|
||||||
|
li r25,pb7cr /* PB7CR=Peripheral Bank 7 Configuration Register */ |
||||||
|
mtdcr ebccfga,r25 |
||||||
|
lis r4,0x7411 |
||||||
|
ori r4,r4,0xA000 |
||||||
|
mtdcr ebccfgd,r4 |
||||||
|
|
||||||
|
#ifndef CONFIG_ISP1161_PRESENT |
||||||
|
li r25,pb4cr /* PB4CR=Peripheral Bank 4 Configuration Register */ |
||||||
|
mtdcr ebccfga,r25 |
||||||
|
lis r4,0x7421 |
||||||
|
ori r4,r4,0xA000 |
||||||
|
mtdcr ebccfgd,r4 |
||||||
|
#endif |
||||||
|
#ifdef IDE_USES_ISA_EMULATION |
||||||
|
li r25,pb5cr /* PB5CR=Peripheral Bank 5 Configuration Register */ |
||||||
|
mtdcr ebccfga,r25 |
||||||
|
lis r4,0x0000 |
||||||
|
ori r4,r4,0x0000 |
||||||
|
mtdcr ebccfgd,r4 |
||||||
|
#endif |
||||||
|
|
||||||
|
/*----------------------------------------------------------------------- |
||||||
|
* Memory bank 4: USB controller Philips ISP6111 |
||||||
|
* 0x77C00000 ... 0x77CFFFFF |
||||||
|
* |
||||||
|
* The chip is connected to: |
||||||
|
* - CPU CS#4 |
||||||
|
* - CPU IRQ#2 |
||||||
|
* - CPU DMA 3 |
||||||
|
* |
||||||
|
* Timing: |
||||||
|
* - command to first data: 300ns. Software must ensure this timing! |
||||||
|
* - Write pulse: 26ns |
||||||
|
* - Read pulse: 33ns |
||||||
|
* - read cycle time: 150ns |
||||||
|
* - write cycle time: 140ns |
||||||
|
* |
||||||
|
* Note: All calculations are based on 33MHz EBC clock. One '#' or '_' is 30ns |
||||||
|
* |
||||||
|
* |- 300ns --| |
||||||
|
* |---- 420ns ---|---- 420ns ---| cycle |
||||||
|
* CS ############:###____#######:###____####### |
||||||
|
* OE ############:####___#######:####___####### |
||||||
|
* WE ############:####__########:####__######## |
||||||
|
* |
||||||
|
* ----> 2 clocks RD/WR pulses: 60ns |
||||||
|
* ----> CSN: 3 clock, 90ns |
||||||
|
* ----> OEN: 1 clocks (read cycle) |
||||||
|
* ----> WBN: 1 clocks (write cycle) |
||||||
|
* ----> WBE: 2 clocks |
||||||
|
* ----> TH: 7 clock, 210ns |
||||||
|
* ----> TWT: 7 clocks |
||||||
|
*----------------------------------------------------------------------- */ |
||||||
|
|
||||||
|
#ifdef CONFIG_ISP1161_PRESENT |
||||||
|
|
||||||
|
li r4,pb4ap /* PB4AP=Peripheral Bank 4 Access Parameters */ |
||||||
|
mtdcr ebccfga,r4 |
||||||
|
|
||||||
|
lis r4,0x030D |
||||||
|
ori r4,r4,0x5E80 |
||||||
|
mtdcr ebccfgd,r4 |
||||||
|
|
||||||
|
li r4,pb4cr /* PB2CR=Peripheral Bank 4 Configuration Register */ |
||||||
|
mtdcr ebccfga,r4 |
||||||
|
|
||||||
|
lis r4,0x77C1 |
||||||
|
ori r4,r4,0xA000 |
||||||
|
mtdcr ebccfgd,r4 |
||||||
|
|
||||||
|
#endif |
||||||
|
|
||||||
|
#ifndef IDE_USES_ISA_EMULATION |
||||||
|
|
||||||
|
/*----------------------------------------------------------------------- |
||||||
|
* Memory Bank 5 used for IDE access |
||||||
|
* |
||||||
|
* Timings for IDE Interface |
||||||
|
* |
||||||
|
* SETUP / LENGTH / HOLD - cycles valid for 33.3 MHz clk -> 30ns cycle time |
||||||
|
* 70 165 30 PIO-Mode 0, [ns] |
||||||
|
* 3 6 1 [Cycles] ----> AP=0x040C0200 |
||||||
|
* 50 125 20 PIO-Mode 1, [ns] |
||||||
|
* 2 5 1 [Cycles] ----> AP=0x03080200 |
||||||
|
* 30 100 15 PIO-Mode 2, [ns] |
||||||
|
* 1 4 1 [Cycles] ----> AP=0x02040200 |
||||||
|
* 30 80 10 PIO-Mode 3, [ns] |
||||||
|
* 1 3 1 [Cycles] ----> AP=0x01840200 |
||||||
|
* 25 70 10 PIO-Mode 4, [ns] |
||||||
|
* 1 3 1 [Cycles] ----> AP=0x01840200 |
||||||
|
* |
||||||
|
*----------------------------------------------------------------------- */ |
||||||
|
|
||||||
|
li r4,pb5ap |
||||||
|
mtdcr ebccfga,r4 |
||||||
|
lis r4,0x040C |
||||||
|
ori r4,r4,0x0200 |
||||||
|
mtdcr ebccfgd,r4 |
||||||
|
|
||||||
|
li r4,pb5cr /* PB2CR=Peripheral Bank 2 Configuration Register */ |
||||||
|
mtdcr ebccfga,r4 |
||||||
|
|
||||||
|
lis r4,0x7A01 |
||||||
|
ori r4,r4,0xA000 |
||||||
|
mtdcr ebccfgd,r4 |
||||||
|
#endif |
||||||
|
/* |
||||||
|
* External Peripheral Control Register |
||||||
|
*/ |
||||||
|
li r4,epcr |
||||||
|
mtdcr ebccfga,r4 |
||||||
|
|
||||||
|
lis r4,0xB84E |
||||||
|
ori r4,r4,0xF000 |
||||||
|
mtdcr ebccfgd,r4 |
||||||
|
/* |
||||||
|
* drive POST code |
||||||
|
*/ |
||||||
|
lis r4,0x7900 |
||||||
|
ori r4,r4,0x0080 |
||||||
|
li r3,0x0001 |
||||||
|
stb r3,0(r4) /* 01 -> external bus controller is initialized */ |
||||||
|
nop /* pass2 DCR errata #8 */ |
||||||
|
blr |
||||||
@ -0,0 +1,94 @@ |
|||||||
|
/*
|
||||||
|
* (C) Copyright 2007 |
||||||
|
* Heiko Schocher, DENX Software Engineering, hs@denx.de. |
||||||
|
* |
||||||
|
* See file CREDITS for list of people who contributed to this |
||||||
|
* project. |
||||||
|
* |
||||||
|
* This program is free software; you can redistribute it and/or |
||||||
|
* modify it under the terms of the GNU General Public License as |
||||||
|
* published by the Free Software Foundation; either version 2 of |
||||||
|
* the License, or (at your option) any later version. |
||||||
|
* |
||||||
|
* This program is distributed in the hope that it will be useful, |
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||||
|
* GNU General Public License for more details. |
||||||
|
* |
||||||
|
* You should have received a copy of the GNU General Public License |
||||||
|
* along with this program; if not, write to the Free Software |
||||||
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
||||||
|
* MA 02111-1307 USA |
||||||
|
*/ |
||||||
|
|
||||||
|
#include <common.h> |
||||||
|
|
||||||
|
#if (CONFIG_COMMANDS & CFG_CMD_NAND) |
||||||
|
|
||||||
|
#include <nand.h> |
||||||
|
#include <asm/processor.h> |
||||||
|
|
||||||
|
#define readb(addr) *(volatile u_char *)(addr) |
||||||
|
#define readl(addr) *(volatile u_long *)(addr) |
||||||
|
#define writeb(d,addr) *(volatile u_char *)(addr) = (d) |
||||||
|
|
||||||
|
#define SC3_NAND_ALE 29 /* GPIO PIN 3 */ |
||||||
|
#define SC3_NAND_CLE 30 /* GPIO PIN 2 */ |
||||||
|
#define SC3_NAND_CE 27 /* GPIO PIN 5 */ |
||||||
|
|
||||||
|
static void *sc3_io_base; |
||||||
|
static void *sc3_control_base = (void *)0xEF600700; |
||||||
|
|
||||||
|
static void sc3_nand_hwcontrol(struct mtd_info *mtd, int cmd) |
||||||
|
{ |
||||||
|
switch (cmd) { |
||||||
|
case NAND_CTL_SETCLE: |
||||||
|
set_bit (SC3_NAND_CLE, sc3_control_base); |
||||||
|
break; |
||||||
|
case NAND_CTL_CLRCLE: |
||||||
|
clear_bit (SC3_NAND_CLE, sc3_control_base); |
||||||
|
break; |
||||||
|
|
||||||
|
case NAND_CTL_SETALE: |
||||||
|
set_bit (SC3_NAND_ALE, sc3_control_base); |
||||||
|
break; |
||||||
|
case NAND_CTL_CLRALE: |
||||||
|
clear_bit (SC3_NAND_ALE, sc3_control_base); |
||||||
|
break; |
||||||
|
|
||||||
|
case NAND_CTL_SETNCE: |
||||||
|
set_bit (SC3_NAND_CE, sc3_control_base); |
||||||
|
break; |
||||||
|
case NAND_CTL_CLRNCE: |
||||||
|
clear_bit (SC3_NAND_CE, sc3_control_base); |
||||||
|
break; |
||||||
|
} |
||||||
|
} |
||||||
|
|
||||||
|
static int sc3_nand_dev_ready(struct mtd_info *mtd) |
||||||
|
{ |
||||||
|
if (!(readl(sc3_control_base + 0x1C) & 0x4000)) |
||||||
|
return 0; |
||||||
|
return 1; |
||||||
|
} |
||||||
|
|
||||||
|
static void sc3_select_chip(struct mtd_info *mtd, int chip) |
||||||
|
{ |
||||||
|
clear_bit (SC3_NAND_CE, sc3_control_base); |
||||||
|
} |
||||||
|
|
||||||
|
int board_nand_init(struct nand_chip *nand) |
||||||
|
{ |
||||||
|
nand->eccmode = NAND_ECC_SOFT; |
||||||
|
|
||||||
|
sc3_io_base = (void *) CFG_NAND_BASE; |
||||||
|
/* Set address of NAND IO lines (Using Linear Data Access Region) */ |
||||||
|
nand->IO_ADDR_R = (void __iomem *) sc3_io_base; |
||||||
|
nand->IO_ADDR_W = (void __iomem *) sc3_io_base; |
||||||
|
/* Reference hardware control function */ |
||||||
|
nand->hwcontrol = sc3_nand_hwcontrol; |
||||||
|
nand->dev_ready = sc3_nand_dev_ready; |
||||||
|
nand->select_chip = sc3_select_chip; |
||||||
|
return 0; |
||||||
|
} |
||||||
|
#endif |
||||||
@ -0,0 +1,779 @@ |
|||||||
|
/*
|
||||||
|
* (C) Copyright 2007 |
||||||
|
* Heiko Schocher, DENX Software Engineering, <hs@denx.de>. |
||||||
|
* |
||||||
|
* (C) Copyright 2003 |
||||||
|
* Juergen Beisert, EuroDesign embedded technologies, info@eurodsn.de |
||||||
|
* Derived from walnut.c |
||||||
|
* |
||||||
|
* (C) Copyright 2000 |
||||||
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
||||||
|
* |
||||||
|
* See file CREDITS for list of people who contributed to this |
||||||
|
* project. |
||||||
|
* |
||||||
|
* This program is free software; you can redistribute it and/or |
||||||
|
* modify it under the terms of the GNU General Public License as |
||||||
|
* published by the Free Software Foundation; either version 2 of |
||||||
|
* the License, or (at your option) any later version. |
||||||
|
* |
||||||
|
* This program is distributed in the hope that it will be useful, |
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||||
|
* GNU General Public License for more details. |
||||||
|
* |
||||||
|
* You should have received a copy of the GNU General Public License |
||||||
|
* along with this program; if not, write to the Free Software |
||||||
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
||||||
|
* MA 02111-1307 USA |
||||||
|
* |
||||||
|
* $Log:$ |
||||||
|
*/ |
||||||
|
|
||||||
|
#include <common.h> |
||||||
|
#include <asm/processor.h> |
||||||
|
#include <asm/io.h> |
||||||
|
#include "solidcard3.h" |
||||||
|
#include <pci.h> |
||||||
|
#include <i2c.h> |
||||||
|
#include <malloc.h> |
||||||
|
|
||||||
|
#undef writel |
||||||
|
#undef writeb |
||||||
|
#define writeb(b,addr) ((*(volatile u8 *) (addr)) = (b)) |
||||||
|
#define writel(b,addr) ((*(volatile u32 *) (addr)) = (b)) |
||||||
|
|
||||||
|
/* write only register to configure things in our CPLD */ |
||||||
|
#define CPLD_CONTROL_1 0x79000102 |
||||||
|
#define CPLD_VERSION 0x79000103 |
||||||
|
|
||||||
|
#define IS_CAMERON ((*(unsigned char *)(CPLD_VERSION)== 0x32) ? 1 : 0) |
||||||
|
|
||||||
|
static struct pci_controller hose={0,}; |
||||||
|
|
||||||
|
/************************************************************
|
||||||
|
* Standard definition |
||||||
|
************************************************************/ |
||||||
|
|
||||||
|
/* CPC0_CR0 Function ISA bus
|
||||||
|
- GPIO0 |
||||||
|
- GPIO1 -> Output: NAND-Command Latch Enable |
||||||
|
- GPIO2 -> Output: NAND Address Latch Enable |
||||||
|
- GPIO3 -> IRQ input ISA-IRQ #5 (through CPLD) |
||||||
|
- GPIO4 -> Output: NAND-Chip Enable |
||||||
|
- GPIO5 -> IRQ input ISA-IRQ#7 (through CPLD) |
||||||
|
- GPIO6 -> IRQ input ISA-IRQ#9 (through CPLD) |
||||||
|
- GPIO7 -> IRQ input ISA-IRQ#10 (through CPLD) |
||||||
|
- GPIO8 -> IRQ input ISA-IRQ#11 (through CPLD) |
||||||
|
- GPIO9 -> IRQ input ISA-IRQ#12 (through CPLD) |
||||||
|
- GPIO10/CS1# -> CS1# NAND ISA-CS#0 |
||||||
|
- GPIO11/CS2# -> CS2# ISA emulation ISA-CS#1 |
||||||
|
- GPIO12/CS3# -> CS3# 2nd Flash-Bank ISA-CS#2 or ISA-CS#7 |
||||||
|
- GPIO13/CS4# -> CS4# USB HC or ISA emulation ISA-CS#3 |
||||||
|
- GPIO14/CS5# -> CS5# Boosted IDE access ISA-CS#4 |
||||||
|
- GPIO15/CS6# -> CS6# ISA emulation ISA-CS#5 |
||||||
|
- GPIO16/CS7# -> CS7# ISA emulation ISA-CS#6 |
||||||
|
- GPIO17/IRQ0 -> GPIO, in, NAND-Ready/Busy# line ISA-IRQ#3 |
||||||
|
- GPIO18/IRQ1 -> IRQ input ISA-IRQ#14 |
||||||
|
- GPIO19/IRQ2 -> IRQ input or USB ISA-IRQ#4 |
||||||
|
- GPIO20/IRQ3 -> IRQ input PCI-IRQ#D |
||||||
|
- GPIO21/IRQ4 -> IRQ input PCI-IRQ#C |
||||||
|
- GPIO22/IRQ5 -> IRQ input PCI-IRQ#B |
||||||
|
- GPIO23/IRQ6 -> IRQ input PCI-IRQ#A |
||||||
|
- GPIO24 -> if GPIO output: 0=JTAG CPLD activ, 1=JTAG CPLD inactiv |
||||||
|
*/ |
||||||
|
/*
|
||||||
|
| CPLD register: io-space at offset 0x102 (write only) |
||||||
|
| 0 |
||||||
|
| 1 |
||||||
|
| 2 0=CS#4 USB CS#, 1=ISA or GP bus |
||||||
|
| 3 |
||||||
|
| 4 |
||||||
|
| 5 |
||||||
|
| 6 1=enable faster IDE access |
||||||
|
| 7 |
||||||
|
*/ |
||||||
|
#define USB_CHIP_ENABLE 0x04 |
||||||
|
#define IDE_BOOSTING 0x40 |
||||||
|
|
||||||
|
/* --------------- USB stuff ------------------------------------- */ |
||||||
|
#ifdef CONFIG_ISP1161_PRESENT |
||||||
|
/**
|
||||||
|
* initUsbHost- Initialize the Philips isp1161 HC part if present |
||||||
|
* @cpldConfig: Pointer to value in write only CPLD register |
||||||
|
* |
||||||
|
* Initialize the USB host controller if present and fills the |
||||||
|
* scratch register to inform the driver about used resources |
||||||
|
*/ |
||||||
|
|
||||||
|
static void initUsbHost (unsigned char *cpldConfig) |
||||||
|
{ |
||||||
|
int i; |
||||||
|
unsigned long usbBase; |
||||||
|
/*
|
||||||
|
* Read back where init.S has located the USB chip |
||||||
|
*/ |
||||||
|
mtdcr (0x012, 0x04); |
||||||
|
usbBase = mfdcr (0x013); |
||||||
|
if (!(usbBase & 0x18000)) /* enabled? */ |
||||||
|
return; |
||||||
|
usbBase &= 0xFFF00000; |
||||||
|
|
||||||
|
/*
|
||||||
|
* to test for the USB controller enable using of CS#4 and DMA 3 for USB access |
||||||
|
*/ |
||||||
|
writeb (*cpldConfig | USB_CHIP_ENABLE,CPLD_CONTROL_1); |
||||||
|
|
||||||
|
/*
|
||||||
|
* first check: is the controller assembled? |
||||||
|
*/ |
||||||
|
hcWriteWord (usbBase, 0x5555, HcScratch); |
||||||
|
if (hcReadWord (usbBase, HcScratch) == 0x5555) { |
||||||
|
hcWriteWord (usbBase, 0xAAAA, HcScratch); |
||||||
|
if (hcReadWord (usbBase, HcScratch) == 0xAAAA) { |
||||||
|
if ((hcReadWord (usbBase, HcChipID) & 0xFF00) != 0x6100) |
||||||
|
return; /* this is not our controller */ |
||||||
|
/*
|
||||||
|
* try a software reset. This needs up to 10 seconds (see datasheet) |
||||||
|
*/ |
||||||
|
hcWriteDWord (usbBase, 0x00000001, HcCommandStatus); |
||||||
|
for (i = 1000; i > 0; i--) { /* loop up to 10 seconds */ |
||||||
|
udelay (10); |
||||||
|
if (!(hcReadDWord (usbBase, HcCommandStatus) & 0x01)) |
||||||
|
break; |
||||||
|
} |
||||||
|
|
||||||
|
if (!i) |
||||||
|
return; /* the controller doesn't responding. Broken? */ |
||||||
|
/*
|
||||||
|
* OK. USB controller is ready. Initialize it in such way the later driver |
||||||
|
* can us it (without any knowing about specific implementation) |
||||||
|
*/ |
||||||
|
hcWriteDWord (usbBase, 0x00000000, HcControl); |
||||||
|
/*
|
||||||
|
* disable all interrupt sources. Because we |
||||||
|
* don't know where we come from (hard reset, cold start, soft reset...) |
||||||
|
*/ |
||||||
|
hcWriteDWord (usbBase, 0x8000007D, HcInterruptDisable); |
||||||
|
/*
|
||||||
|
* our current setup hardware configuration |
||||||
|
* - every port power supply can switched indepently |
||||||
|
* - every port can signal overcurrent |
||||||
|
* - every port is "outside" and the devices are removeable |
||||||
|
*/ |
||||||
|
hcWriteDWord (usbBase, 0x32000902, HcRhDescriptorA); |
||||||
|
hcWriteDWord (usbBase, 0x00060000, HcRhDescriptorB); |
||||||
|
/*
|
||||||
|
* don't forget to switch off power supply of each port |
||||||
|
* The later running driver can reenable them to find and use |
||||||
|
* the (maybe) connected devices. |
||||||
|
* |
||||||
|
*/ |
||||||
|
hcWriteDWord (usbBase, 0x00000200, HcRhPortStatus1); |
||||||
|
hcWriteDWord (usbBase, 0x00000200, HcRhPortStatus2); |
||||||
|
hcWriteWord (usbBase, 0x0428, HcHardwareConfiguration); |
||||||
|
hcWriteWord (usbBase, 0x0040, HcDMAConfiguration); |
||||||
|
hcWriteWord (usbBase, 0x0000, HcuPInterruptEnable); |
||||||
|
hcWriteWord (usbBase, 0xA000 | (0x03 << 8) | 27, HcScratch); |
||||||
|
/*
|
||||||
|
* controller is present and usable |
||||||
|
*/ |
||||||
|
*cpldConfig |= USB_CHIP_ENABLE; |
||||||
|
} |
||||||
|
} |
||||||
|
} |
||||||
|
#endif |
||||||
|
|
||||||
|
#if defined(CONFIG_START_IDE) |
||||||
|
int board_start_ide(void) |
||||||
|
{ |
||||||
|
if (IS_CAMERON) { |
||||||
|
puts ("no IDE on cameron board.\n"); |
||||||
|
return 0; |
||||||
|
} |
||||||
|
return 1; |
||||||
|
} |
||||||
|
#endif |
||||||
|
|
||||||
|
static int sc3_cameron_init (void) |
||||||
|
{ |
||||||
|
/* Set up the Memory Controller for the CAMERON version */ |
||||||
|
mtebc (pb4ap, 0x01805940); |
||||||
|
mtebc (pb4cr, 0x7401a000); |
||||||
|
mtebc (pb5ap, 0x01805940); |
||||||
|
mtebc (pb5cr, 0x7401a000); |
||||||
|
mtebc (pb6ap, 0x0); |
||||||
|
mtebc (pb6cr, 0x0); |
||||||
|
mtebc (pb7ap, 0x0); |
||||||
|
mtebc (pb7cr, 0x0); |
||||||
|
return 0; |
||||||
|
} |
||||||
|
|
||||||
|
void sc3_read_eeprom (void) |
||||||
|
{ |
||||||
|
uchar i2c_buffer[18]; |
||||||
|
|
||||||
|
i2c_read (0x50, 0x03, 1, i2c_buffer, 9); |
||||||
|
i2c_buffer[9] = 0; |
||||||
|
setenv ("serial#", (char *)i2c_buffer); |
||||||
|
|
||||||
|
/* read mac-address from eeprom */ |
||||||
|
i2c_read (0x50, 0x11, 1, i2c_buffer, 15); |
||||||
|
i2c_buffer[17] = 0; |
||||||
|
i2c_buffer[16] = i2c_buffer[14]; |
||||||
|
i2c_buffer[15] = i2c_buffer[13]; |
||||||
|
i2c_buffer[14] = ':'; |
||||||
|
i2c_buffer[13] = i2c_buffer[12]; |
||||||
|
i2c_buffer[12] = i2c_buffer[11]; |
||||||
|
i2c_buffer[11] = ':'; |
||||||
|
i2c_buffer[8] = ':'; |
||||||
|
i2c_buffer[5] = ':'; |
||||||
|
i2c_buffer[2] = ':'; |
||||||
|
setenv ("ethaddr", (char *)i2c_buffer); |
||||||
|
} |
||||||
|
|
||||||
|
int board_early_init_f (void) |
||||||
|
{ |
||||||
|
/* write only register to configure things in our CPLD */ |
||||||
|
unsigned char cpldConfig_1=0x00; |
||||||
|
|
||||||
|
/*-------------------------------------------------------------------------+
|
||||||
|
| Interrupt controller setup for the SolidCard III CPU card (plus Evaluation board). |
||||||
|
| |
||||||
|
| Note: IRQ 0 UART 0, active high; level sensitive |
||||||
|
| IRQ 1 UART 1, active high; level sensitive |
||||||
|
| IRQ 2 IIC, active high; level sensitive |
||||||
|
| IRQ 3 Ext. master, rising edge, edge sensitive |
||||||
|
| IRQ 4 PCI, active high; level sensitive |
||||||
|
| IRQ 5 DMA Channel 0, active high; level sensitive |
||||||
|
| IRQ 6 DMA Channel 1, active high; level sensitive |
||||||
|
| IRQ 7 DMA Channel 2, active high; level sensitive |
||||||
|
| IRQ 8 DMA Channel 3, active high; level sensitive |
||||||
|
| IRQ 9 Ethernet Wakeup, active high; level sensitive |
||||||
|
| IRQ 10 MAL System Error (SERR), active high; level sensitive |
||||||
|
| IRQ 11 MAL Tx End of Buffer, active high; level sensitive |
||||||
|
| IRQ 12 MAL Rx End of Buffer, active high; level sensitive |
||||||
|
| IRQ 13 MAL Tx Descriptor Error, active high; level sensitive |
||||||
|
| IRQ 14 MAL Rx Descriptor Error, active high; level sensitive |
||||||
|
| IRQ 15 Ethernet, active high; level sensitive |
||||||
|
| IRQ 16 External PCI SERR, active high; level sensitive |
||||||
|
| IRQ 17 ECC Correctable Error, active high; level sensitive |
||||||
|
| IRQ 18 PCI Power Management, active high; level sensitive |
||||||
|
| |
||||||
|
| IRQ 19 (EXT IRQ7 405GPr only) |
||||||
|
| IRQ 20 (EXT IRQ8 405GPr only) |
||||||
|
| IRQ 21 (EXT IRQ9 405GPr only) |
||||||
|
| IRQ 22 (EXT IRQ10 405GPr only) |
||||||
|
| IRQ 23 (EXT IRQ11 405GPr only) |
||||||
|
| IRQ 24 (EXT IRQ12 405GPr only) |
||||||
|
| |
||||||
|
| IRQ 25 (EXT IRQ 0) NAND-Flash R/B# (raising edge means flash is ready) |
||||||
|
| IRQ 26 (EXT IRQ 1) IDE0 interrupt (x86 = IRQ14). Active high (edge sensitive) |
||||||
|
| IRQ 27 (EXT IRQ 2) USB controller |
||||||
|
| IRQ 28 (EXT IRQ 3) INT D, VGA; active low; level sensitive |
||||||
|
| IRQ 29 (EXT IRQ 4) INT C, Ethernet; active low; level sensitive |
||||||
|
| IRQ 30 (EXT IRQ 5) INT B, PC104+ SLOT; active low; level sensitive |
||||||
|
| IRQ 31 (EXT IRQ 6) INT A, PC104+ SLOT; active low; level sensitive |
||||||
|
| |
||||||
|
| Direct Memory Access Controller Signal Polarities |
||||||
|
| DRQ0 active high (like ISA) |
||||||
|
| ACK0 active low (like ISA) |
||||||
|
| EOT0 active high (like ISA) |
||||||
|
| DRQ1 active high (like ISA) |
||||||
|
| ACK1 active low (like ISA) |
||||||
|
| EOT1 active high (like ISA) |
||||||
|
| DRQ2 active high (like ISA) |
||||||
|
| ACK2 active low (like ISA) |
||||||
|
| EOT2 active high (like ISA) |
||||||
|
| DRQ3 active high (like ISA) |
||||||
|
| ACK3 active low (like ISA) |
||||||
|
| EOT3 active high (like ISA) |
||||||
|
| |
||||||
|
+-------------------------------------------------------------------------*/ |
||||||
|
|
||||||
|
writeb (cpldConfig_1, CPLD_CONTROL_1); /* disable everything in CPLD */ |
||||||
|
|
||||||
|
mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */ |
||||||
|
mtdcr (uicer, 0x00000000); /* disable all ints */ |
||||||
|
mtdcr (uiccr, 0x00000000); /* set all to be non-critical */ |
||||||
|
|
||||||
|
if (IS_CAMERON) { |
||||||
|
sc3_cameron_init(); |
||||||
|
mtdcr (0x0B6, 0x18000000); |
||||||
|
mtdcr (uicpr, 0xFFFFFFF0); |
||||||
|
mtdcr (uictr, 0x10001030); |
||||||
|
} else { |
||||||
|
mtdcr (0x0B6, 0x0000000); |
||||||
|
mtdcr (uicpr, 0xFFFFFFE0); |
||||||
|
mtdcr (uictr, 0x10000020); |
||||||
|
} |
||||||
|
mtdcr (uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */ |
||||||
|
mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */ |
||||||
|
|
||||||
|
/* setup other implementation specific details */ |
||||||
|
mtdcr (ecr, 0x60606000); |
||||||
|
|
||||||
|
mtdcr (cntrl1, 0x000042C0); |
||||||
|
|
||||||
|
if (IS_CAMERON) { |
||||||
|
mtdcr (cntrl0, 0x01380000); |
||||||
|
/* Setup the GPIOs */ |
||||||
|
writel (0x08008000, 0xEF600700); /* Output states */ |
||||||
|
writel (0x00000000, 0xEF600718); /* Open Drain control */ |
||||||
|
writel (0x68098000, 0xEF600704); /* Output control */ |
||||||
|
} else { |
||||||
|
mtdcr (cntrl0,0x00080000); |
||||||
|
/* Setup the GPIOs */ |
||||||
|
writel (0x08000000, 0xEF600700); /* Output states */ |
||||||
|
writel (0x14000000, 0xEF600718); /* Open Drain control */ |
||||||
|
writel (0x7C000000, 0xEF600704); /* Output control */ |
||||||
|
} |
||||||
|
|
||||||
|
/* Code decompression disabled */ |
||||||
|
mtdcr (kiar, kconf); |
||||||
|
mtdcr (kidr, 0x2B); |
||||||
|
|
||||||
|
/* CPC0_ER: enable sleep mode of (currently) unused components */ |
||||||
|
/* CPC0_FR: force unused components into sleep mode */ |
||||||
|
mtdcr (cpmer, 0x3F800000); |
||||||
|
mtdcr (cpmfr, 0x14000000); |
||||||
|
|
||||||
|
/* set PLB priority */ |
||||||
|
mtdcr (0x87, 0x08000000); |
||||||
|
|
||||||
|
/* --------------- DMA stuff ------------------------------------- */ |
||||||
|
mtdcr (0x126, 0x49200000); |
||||||
|
|
||||||
|
#ifndef IDE_USES_ISA_EMULATION |
||||||
|
cpldConfig_1 |= IDE_BOOSTING; /* enable faster IDE */ |
||||||
|
/* cpldConfig |= 0x01; */ /* enable 8.33MHz output, if *not* present on your baseboard */ |
||||||
|
writeb (cpldConfig_1, CPLD_CONTROL_1); |
||||||
|
#endif |
||||||
|
|
||||||
|
#ifdef CONFIG_ISP1161_PRESENT |
||||||
|
initUsbHost (&cpldConfig_1); |
||||||
|
writeb (cpldConfig_1, CPLD_CONTROL_1); |
||||||
|
#endif |
||||||
|
return(0); |
||||||
|
} |
||||||
|
|
||||||
|
int misc_init_r (void) |
||||||
|
{ |
||||||
|
char *s1; |
||||||
|
int i, xilinx_val; |
||||||
|
volatile char *xilinx_adr; |
||||||
|
xilinx_adr = (char *)0x79000102; |
||||||
|
|
||||||
|
*xilinx_adr = 0x00; |
||||||
|
|
||||||
|
/* customer settings ***************************************** */ |
||||||
|
/*
|
||||||
|
s1 = getenv ("function"); |
||||||
|
if (s1) { |
||||||
|
if (!strcmp (s1, "Rosho")) { |
||||||
|
printf ("function 'Rosho' activated\n"); |
||||||
|
*xilinx_adr = 0x40; |
||||||
|
} |
||||||
|
else { |
||||||
|
printf (">>>>>>>>>> function %s not recognized\n",s1); |
||||||
|
} |
||||||
|
} |
||||||
|
*/ |
||||||
|
|
||||||
|
/* individual settings ***************************************** */ |
||||||
|
if ((s1 = getenv ("xilinx"))) { |
||||||
|
i=0; |
||||||
|
xilinx_val = 0; |
||||||
|
while (i < 3 && s1[i]) { |
||||||
|
if (s1[i] >= '0' && s1[i] <= '9') |
||||||
|
xilinx_val = (xilinx_val << 4) + s1[i] - '0'; |
||||||
|
else |
||||||
|
if (s1[i] >= 'A' && s1[i] <= 'F') |
||||||
|
xilinx_val = (xilinx_val << 4) + s1[i] - 'A' + 10; |
||||||
|
else |
||||||
|
if (s1[i] >= 'a' && s1[i] <= 'f') |
||||||
|
xilinx_val = (xilinx_val << 4) + s1[i] - 'a' + 10; |
||||||
|
else { |
||||||
|
xilinx_val = -1; |
||||||
|
break; |
||||||
|
} |
||||||
|
i++; |
||||||
|
} |
||||||
|
if (xilinx_val >= 0 && xilinx_val <=255 && i < 3) { |
||||||
|
printf ("Xilinx: set to %s\n", s1); |
||||||
|
*xilinx_adr = (unsigned char) xilinx_val; |
||||||
|
} else |
||||||
|
printf ("Xilinx: rejected value %s\n", s1); |
||||||
|
} |
||||||
|
return 0; |
||||||
|
} |
||||||
|
|
||||||
|
/* -------------------------------------------------------------------------
|
||||||
|
* printCSConfig |
||||||
|
* |
||||||
|
* Print some informations about chips select configurations |
||||||
|
* Only used while debugging. |
||||||
|
* |
||||||
|
* Params: |
||||||
|
* - No. of CS pin |
||||||
|
* - AP of this CS |
||||||
|
* - CR of this CS |
||||||
|
* |
||||||
|
* Returns |
||||||
|
* nothing |
||||||
|
------------------------------------------------------------------------- */ |
||||||
|
|
||||||
|
#ifdef SC3_DEBUGOUT |
||||||
|
static void printCSConfig(int reg,unsigned long ap,unsigned long cr) |
||||||
|
{ |
||||||
|
const char *bsize[4] = {"8","16","32","?"}; |
||||||
|
const unsigned char banks[8] = {1, 2, 4, 8, 16, 32, 64, 128}; |
||||||
|
const char *bankaccess[4] = {"disabled", "RO", "WO", "RW"}; |
||||||
|
|
||||||
|
#define CYCLE 30 /* time of one clock (based on 33MHz) */ |
||||||
|
|
||||||
|
printf("\nCS#%d",reg); |
||||||
|
if (!(cr & 0x00018000)) |
||||||
|
puts(" unused"); |
||||||
|
else { |
||||||
|
if (((cr&0xFFF00000U) & ((banks[(cr & 0x000E0000) >> 17]-1) << 20))) |
||||||
|
puts(" Address is not multiple of bank size!"); |
||||||
|
|
||||||
|
printf("\n -%s bit device", |
||||||
|
bsize[(cr & 0x00006000) >> 13]); |
||||||
|
printf(" at 0x%08lX", cr & 0xFFF00000U); |
||||||
|
printf(" size: %u MB", banks[(cr & 0x000E0000) >> 17]); |
||||||
|
printf(" rights: %s", bankaccess[(cr & 0x00018000) >> 15]); |
||||||
|
if (ap & 0x80000000) { |
||||||
|
printf("\n -Burst device (%luns/%luns)", |
||||||
|
(((ap & 0x7C000000) >> 26) + 1) * CYCLE, |
||||||
|
(((ap & 0x03800000) >> 23) + 1) * CYCLE); |
||||||
|
} else { |
||||||
|
printf("\n -Non burst device, active cycle %luns", |
||||||
|
(((ap & 0x7F800000) >> 23) + 1) * CYCLE); |
||||||
|
printf("\n -Address setup %luns", |
||||||
|
((ap & 0xC0000) >> 18) * CYCLE); |
||||||
|
printf("\n -CS active to RD %luns/WR %luns", |
||||||
|
((ap & 0x30000) >> 16) * CYCLE, |
||||||
|
((ap & 0xC000) >> 14) * CYCLE); |
||||||
|
printf("\n -WR to CS inactive %luns", |
||||||
|
((ap & 0x3000) >> 12) * CYCLE); |
||||||
|
printf("\n -Hold after access %luns", |
||||||
|
((ap & 0xE00) >> 9) * CYCLE); |
||||||
|
printf("\n -Ready is %sabled", |
||||||
|
ap & 0x100 ? "en" : "dis"); |
||||||
|
} |
||||||
|
} |
||||||
|
} |
||||||
|
#endif |
||||||
|
|
||||||
|
#ifdef SC3_DEBUGOUT |
||||||
|
|
||||||
|
static unsigned int ap[] = {pb0ap, pb1ap, pb2ap, pb3ap, pb4ap, |
||||||
|
pb5ap, pb6ap, pb7ap}; |
||||||
|
static unsigned int cr[] = {pb0cr, pb1cr, pb2cr, pb3cr, pb4cr, |
||||||
|
pb5cr, pb6cr, pb7cr}; |
||||||
|
|
||||||
|
static int show_reg (int nr) |
||||||
|
{ |
||||||
|
unsigned long ul1, ul2; |
||||||
|
|
||||||
|
mtdcr (ebccfga, ap[nr]); |
||||||
|
ul1 = mfdcr (ebccfgd); |
||||||
|
mtdcr (ebccfga, cr[nr]); |
||||||
|
ul2 = mfdcr(ebccfgd); |
||||||
|
printCSConfig(nr, ul1, ul2); |
||||||
|
return 0; |
||||||
|
} |
||||||
|
#endif |
||||||
|
|
||||||
|
int checkboard (void) |
||||||
|
{ |
||||||
|
#ifdef SC3_DEBUGOUT |
||||||
|
unsigned long ul1; |
||||||
|
int i; |
||||||
|
|
||||||
|
for (i = 0; i < 8; i++) { |
||||||
|
show_reg (i); |
||||||
|
} |
||||||
|
|
||||||
|
mtdcr (ebccfga, epcr); |
||||||
|
ul1 = mfdcr (ebccfgd); |
||||||
|
|
||||||
|
puts ("\nGeneral configuration:\n"); |
||||||
|
|
||||||
|
if (ul1 & 0x80000000) |
||||||
|
printf(" -External Bus is always driven\n"); |
||||||
|
|
||||||
|
if (ul1 & 0x400000) |
||||||
|
printf(" -CS signals are always driven\n"); |
||||||
|
|
||||||
|
if (ul1 & 0x20000) |
||||||
|
printf(" -PowerDown after %lu clocks\n", |
||||||
|
(ul1 & 0x1F000) >> 7); |
||||||
|
|
||||||
|
switch (ul1 & 0xC0000) |
||||||
|
{ |
||||||
|
case 0xC0000: |
||||||
|
printf(" -No external master present\n"); |
||||||
|
break; |
||||||
|
case 0x00000: |
||||||
|
printf(" -8 bit external master present\n"); |
||||||
|
break; |
||||||
|
case 0x40000: |
||||||
|
printf(" -16 bit external master present\n"); |
||||||
|
break; |
||||||
|
case 0x80000: |
||||||
|
printf(" -32 bit external master present\n"); |
||||||
|
break; |
||||||
|
} |
||||||
|
|
||||||
|
switch (ul1 & 0x300000) |
||||||
|
{ |
||||||
|
case 0x300000: |
||||||
|
printf(" -Prefetch: Illegal setting!\n"); |
||||||
|
break; |
||||||
|
case 0x000000: |
||||||
|
printf(" -1 doubleword prefetch\n"); |
||||||
|
break; |
||||||
|
case 0x100000: |
||||||
|
printf(" -2 doublewords prefetch\n"); |
||||||
|
break; |
||||||
|
case 0x200000: |
||||||
|
printf(" -4 doublewords prefetch\n"); |
||||||
|
break; |
||||||
|
} |
||||||
|
putc ('\n'); |
||||||
|
#endif |
||||||
|
printf("Board: SolidCard III %s %s version.\n", |
||||||
|
(IS_CAMERON ? "Cameron" : "Eurodesign"), CONFIG_SC3_VERSION); |
||||||
|
return 0; |
||||||
|
} |
||||||
|
|
||||||
|
static int printSDRAMConfig(char reg, unsigned long cr) |
||||||
|
{ |
||||||
|
const int bisize[8]={4, 8, 16, 32, 64, 128, 256, 0}; |
||||||
|
#ifdef SC3_DEBUGOUT |
||||||
|
const char *basize[8]= |
||||||
|
{"4", "8", "16", "32", "64", "128", "256", "Reserved"}; |
||||||
|
|
||||||
|
printf("SDRAM bank %d",reg); |
||||||
|
|
||||||
|
if (!(cr & 0x01)) |
||||||
|
puts(" disabled\n"); |
||||||
|
else { |
||||||
|
printf(" at 0x%08lX, size %s MB",cr & 0xFFC00000,basize[(cr&0xE0000)>>17]); |
||||||
|
printf(" mode %lu\n",((cr & 0xE000)>>13)+1); |
||||||
|
} |
||||||
|
#endif |
||||||
|
|
||||||
|
if (cr & 0x01) |
||||||
|
return(bisize[(cr & 0xE0000) >> 17]); |
||||||
|
|
||||||
|
return 0; |
||||||
|
} |
||||||
|
|
||||||
|
#ifdef SC3_DEBUGOUT |
||||||
|
static unsigned int mbcf[] = {mem_mb0cf, mem_mb1cf, mem_mb2cf, mem_mb3cf}; |
||||||
|
#endif |
||||||
|
|
||||||
|
long int initdram (int board_type) |
||||||
|
{ |
||||||
|
unsigned int mems=0; |
||||||
|
unsigned long ul1; |
||||||
|
|
||||||
|
#ifdef SC3_DEBUGOUT |
||||||
|
unsigned long ul2; |
||||||
|
int i; |
||||||
|
|
||||||
|
puts("\nSDRAM configuration:\n"); |
||||||
|
|
||||||
|
mtdcr (memcfga, mem_mcopt1); |
||||||
|
ul1 = mfdcr(memcfgd); |
||||||
|
|
||||||
|
if (!(ul1 & 0x80000000)) { |
||||||
|
puts(" Controller disabled\n"); |
||||||
|
return 0; |
||||||
|
} |
||||||
|
for (i = 0; i < 4; i++) { |
||||||
|
mtdcr (memcfga, mbcf[i]); |
||||||
|
ul1 = mfdcr (memcfgd); |
||||||
|
mems += printSDRAMConfig (i, ul1); |
||||||
|
} |
||||||
|
|
||||||
|
mtdcr (memcfga, mem_sdtr1); |
||||||
|
ul1 = mfdcr(memcfgd); |
||||||
|
|
||||||
|
printf ("Timing:\n -CAS latency %lu\n", ((ul1 & 0x1800000) >> 23)+1); |
||||||
|
printf (" -Precharge %lu (PTA) \n", ((ul1 & 0xC0000) >> 18) + 1); |
||||||
|
printf (" -R/W to Precharge %lu (CTP)\n", ((ul1 & 0x30000) >> 16) + 1); |
||||||
|
printf (" -Leadoff %lu\n", ((ul1 & 0xC000) >> 14) + 1); |
||||||
|
printf (" -CAS to RAS %lu\n", ((ul1 & 0x1C) >> 2) + 4); |
||||||
|
printf (" -RAS to CAS %lu\n", ((ul1 & 0x3) + 1)); |
||||||
|
puts ("Misc:\n"); |
||||||
|
mtdcr (memcfga, mem_rtr); |
||||||
|
ul1 = mfdcr(memcfgd); |
||||||
|
printf (" -Refresh rate: %luns\n", (ul1 >> 16) * 7); |
||||||
|
|
||||||
|
mtdcr(memcfga,mem_pmit); |
||||||
|
ul2=mfdcr(memcfgd); |
||||||
|
|
||||||
|
mtdcr(memcfga,mem_mcopt1); |
||||||
|
ul1=mfdcr(memcfgd); |
||||||
|
|
||||||
|
if (ul1 & 0x20000000) |
||||||
|
printf(" -Power Down after: %luns\n", |
||||||
|
((ul2 & 0xFFC00000) >> 22) * 7); |
||||||
|
else |
||||||
|
puts(" -Power Down disabled\n"); |
||||||
|
|
||||||
|
if (ul1 & 0x40000000) |
||||||
|
printf(" -Self refresh feature active\n"); |
||||||
|
else |
||||||
|
puts(" -Self refresh disabled\n"); |
||||||
|
|
||||||
|
if (ul1 & 0x10000000) |
||||||
|
puts(" -ECC enabled\n"); |
||||||
|
else |
||||||
|
puts(" -ECC disabled\n"); |
||||||
|
|
||||||
|
if (ul1 & 0x8000000) |
||||||
|
puts(" -Using registered SDRAM\n"); |
||||||
|
|
||||||
|
if (!(ul1 & 0x6000000)) |
||||||
|
puts(" -Using 32 bit data width\n"); |
||||||
|
else |
||||||
|
puts(" -Illegal data width!\n"); |
||||||
|
|
||||||
|
if (ul1 & 0x400000) |
||||||
|
puts(" -ECC drivers inactive\n"); |
||||||
|
else |
||||||
|
puts(" -ECC drivers active\n"); |
||||||
|
|
||||||
|
if (ul1 & 0x200000) |
||||||
|
puts(" -Memory lines always active outputs\n"); |
||||||
|
else |
||||||
|
puts(" -Memory lines only at write cycles active outputs\n"); |
||||||
|
|
||||||
|
mtdcr (memcfga, mem_status); |
||||||
|
ul1 = mfdcr (memcfgd); |
||||||
|
if (ul1 & 0x80000000) |
||||||
|
puts(" -SDRAM Controller ready\n"); |
||||||
|
else |
||||||
|
puts(" -SDRAM Controller not ready\n"); |
||||||
|
|
||||||
|
if (ul1 & 0x4000000) |
||||||
|
puts(" -SDRAM in self refresh mode!\n"); |
||||||
|
|
||||||
|
return (mems * 1024 * 1024); |
||||||
|
#else |
||||||
|
mtdcr (memcfga, mem_mb0cf); |
||||||
|
ul1 = mfdcr (memcfgd); |
||||||
|
mems = printSDRAMConfig (0, ul1); |
||||||
|
|
||||||
|
mtdcr (memcfga, mem_mb1cf); |
||||||
|
ul1 = mfdcr (memcfgd); |
||||||
|
mems += printSDRAMConfig (1, ul1); |
||||||
|
|
||||||
|
mtdcr (memcfga, mem_mb2cf); |
||||||
|
ul1 = mfdcr(memcfgd); |
||||||
|
mems += printSDRAMConfig (2, ul1); |
||||||
|
|
||||||
|
mtdcr (memcfga, mem_mb3cf); |
||||||
|
ul1 = mfdcr(memcfgd); |
||||||
|
mems += printSDRAMConfig (3, ul1); |
||||||
|
|
||||||
|
return (mems * 1024 * 1024); |
||||||
|
#endif |
||||||
|
} |
||||||
|
|
||||||
|
static void pci_solidcard3_fixup_irq (struct pci_controller *hose, pci_dev_t dev) |
||||||
|
{ |
||||||
|
/*-------------------------------------------------------------------------+
|
||||||
|
| ,-. ,-. ,-. ,-. ,-. |
||||||
|
| INTD# ----|B|-----|P|-. ,-|P|-. ,-| |-. ,-|G| |
||||||
|
| |R| |C| \ / |C| \ / |E| \ / |r| |
||||||
|
| INTC# ----|I|-----|1|-. `/---|1|-. `/---|t|-. `/---|a| |
||||||
|
| |D| |0| \/ |0| \/ |h| \/ |f| |
||||||
|
| INTB# ----|G|-----|4|-./`----|4|-./`----|e|-./`----|i| |
||||||
|
| |E| |+| /\ |+| /\ |r| /\ |k| |
||||||
|
| INTA# ----| |-----| |- `----| |- `----| |- `----| | |
||||||
|
| `-' `-' `-' `-' `-' |
||||||
|
| Slot 0 10 11 12 13 |
||||||
|
| REQ# 0 1 2 * |
||||||
|
| GNT# 0 1 2 * |
||||||
|
+-------------------------------------------------------------------------*/ |
||||||
|
unsigned char int_line = 0xff; |
||||||
|
|
||||||
|
switch (PCI_DEV(dev)) { |
||||||
|
case 10: |
||||||
|
int_line = 31; /* INT A */ |
||||||
|
POST_OUT(0x42); |
||||||
|
break; |
||||||
|
|
||||||
|
case 11: |
||||||
|
int_line = 30; /* INT B */ |
||||||
|
POST_OUT(0x43); |
||||||
|
break; |
||||||
|
|
||||||
|
case 12: |
||||||
|
int_line = 29; /* INT C */ |
||||||
|
POST_OUT(0x44); |
||||||
|
break; |
||||||
|
|
||||||
|
case 13: |
||||||
|
int_line = 28; /* INT D */ |
||||||
|
POST_OUT(0x45); |
||||||
|
break; |
||||||
|
} |
||||||
|
pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, int_line); |
||||||
|
} |
||||||
|
|
||||||
|
extern void pci_405gp_init(struct pci_controller *hose); |
||||||
|
extern void pci_405gp_fixup_irq(struct pci_controller *hose, pci_dev_t dev); |
||||||
|
extern void pci_405gp_setup_bridge(struct pci_controller *hose, pci_dev_t dev,struct pci_config_table *entry); |
||||||
|
/*
|
||||||
|
* The following table is used when there is a special need to setup a PCI device. |
||||||
|
* For every PCI device found in this table is called the given init function with given |
||||||
|
* parameters. So never let all IDs at PCI_ANY_ID. In this case any found device gets the same |
||||||
|
* parameters! |
||||||
|
* |
||||||
|
*/ |
||||||
|
static struct pci_config_table pci_solidcard3_config_table[] = |
||||||
|
{ |
||||||
|
/* Host to PCI Bridge device (405GP) */ |
||||||
|
{ |
||||||
|
vendor: 0x1014, |
||||||
|
device: 0x0156, |
||||||
|
class: PCI_CLASS_BRIDGE_HOST, |
||||||
|
bus: 0, |
||||||
|
dev: 0, |
||||||
|
func: 0, |
||||||
|
config_device: pci_405gp_setup_bridge |
||||||
|
}, |
||||||
|
{ } |
||||||
|
}; |
||||||
|
|
||||||
|
/*-------------------------------------------------------------------------+
|
||||||
|
| pci_init_board (Called from pci_init() in drivers/pci.c) |
||||||
|
| |
||||||
|
| Init the PCI part of the SolidCard III |
||||||
|
| |
||||||
|
| Params: |
||||||
|
* - Pointer to current PCI hose |
||||||
|
* - Current Device |
||||||
|
* |
||||||
|
* Returns |
||||||
|
* nothing |
||||||
|
+-------------------------------------------------------------------------*/ |
||||||
|
|
||||||
|
void pci_init_board(void) |
||||||
|
{ |
||||||
|
POST_OUT(0x41); |
||||||
|
/*
|
||||||
|
* we want the ptrs to RAM not flash (ie don't use init list) |
||||||
|
*/ |
||||||
|
hose.fixup_irq = pci_solidcard3_fixup_irq; |
||||||
|
hose.config_table = pci_solidcard3_config_table; |
||||||
|
pci_405gp_init(&hose); |
||||||
|
} |
||||||
@ -0,0 +1,117 @@ |
|||||||
|
/*
|
||||||
|
* (C) Copyright 2000 |
||||||
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
||||||
|
* |
||||||
|
* See file CREDITS for list of people who contributed to this |
||||||
|
* project. |
||||||
|
* |
||||||
|
* This program is free software; you can redistribute it and/or |
||||||
|
* modify it under the terms of the GNU General Public License as |
||||||
|
* published by the Free Software Foundation; either version 2 of |
||||||
|
* the License, or (at your option) any later version. |
||||||
|
* |
||||||
|
* This program is distributed in the hope that it will be useful, |
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||||
|
* GNU General Public License for more details. |
||||||
|
* |
||||||
|
* You should have received a copy of the GNU General Public License |
||||||
|
* along with this program; if not, write to the Free Software |
||||||
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
||||||
|
* MA 02111-1307 USA |
||||||
|
*/ |
||||||
|
|
||||||
|
/**
|
||||||
|
* hcWriteWord - write a 16 bit value into the USB controller |
||||||
|
* @base: base address to access the chip registers |
||||||
|
* @value: 16 bit value to write into register @offset |
||||||
|
* @offset: register to write the @value into |
||||||
|
* |
||||||
|
*/ |
||||||
|
static void inline hcWriteWord (unsigned long base, unsigned int value, |
||||||
|
unsigned int offset) |
||||||
|
{ |
||||||
|
out_le16 ((volatile u16*)(base + 2), offset | 0x80); |
||||||
|
out_le16 ((volatile u16*)base, value); |
||||||
|
} |
||||||
|
|
||||||
|
/**
|
||||||
|
* hcWriteDWord - write a 32 bit value into the USB controller |
||||||
|
* @base: base address to access the chip registers |
||||||
|
* @value: 32 bit value to write into register @offset |
||||||
|
* @offset: register to write the @value into |
||||||
|
* |
||||||
|
*/ |
||||||
|
|
||||||
|
static void inline hcWriteDWord (unsigned long base, unsigned long value, |
||||||
|
unsigned int offset) |
||||||
|
{ |
||||||
|
out_le16 ((volatile u16*)(base + 2), offset | 0x80); |
||||||
|
out_le16 ((volatile u16*)base, value); |
||||||
|
out_le16 ((volatile u16*)base, value >> 16); |
||||||
|
} |
||||||
|
|
||||||
|
/**
|
||||||
|
* hcReadWord - read a 16 bit value from the USB controller |
||||||
|
* @base: base address to access the chip registers |
||||||
|
* @offset: register to read from |
||||||
|
* |
||||||
|
* Returns the readed register value |
||||||
|
*/ |
||||||
|
|
||||||
|
static unsigned int inline hcReadWord (unsigned long base, unsigned int offset) |
||||||
|
{ |
||||||
|
out_le16 ((volatile u16*)(base + 2), offset); |
||||||
|
return (in_le16 ((volatile u16*)base)); |
||||||
|
} |
||||||
|
|
||||||
|
/**
|
||||||
|
* hcReadDWord - read a 32 bit value from the USB controller |
||||||
|
* @base: base address to access the chip registers |
||||||
|
* @offset: register to read from |
||||||
|
* |
||||||
|
* Returns the readed register value |
||||||
|
*/ |
||||||
|
|
||||||
|
static unsigned long inline hcReadDWord (unsigned long base, unsigned int offset) |
||||||
|
{ |
||||||
|
unsigned long val, val16; |
||||||
|
|
||||||
|
out_le16 ((volatile u16*)(base + 2), offset); |
||||||
|
val = in_le16((volatile u16*)base); |
||||||
|
val16 = in_le16((volatile u16*)base); |
||||||
|
return (val | (val16 << 16)); |
||||||
|
} |
||||||
|
|
||||||
|
/* control and status registers isp1161 */ |
||||||
|
#define HcRevision 0x00 |
||||||
|
#define HcControl 0x01 |
||||||
|
#define HcCommandStatus 0x02 |
||||||
|
#define HcInterruptStatus 0x03 |
||||||
|
#define HcInterruptEnable 0x04 |
||||||
|
#define HcInterruptDisable 0x05 |
||||||
|
#define HcFmInterval 0x0D |
||||||
|
#define HcFmRemaining 0x0E |
||||||
|
#define HcFmNumber 0x0F |
||||||
|
#define HcLSThreshold 0x11 |
||||||
|
#define HcRhDescriptorA 0x12 |
||||||
|
#define HcRhDescriptorB 0x13 |
||||||
|
#define HcRhStatus 0x14 |
||||||
|
#define HcRhPortStatus1 0x15 |
||||||
|
#define HcRhPortStatus2 0x16 |
||||||
|
|
||||||
|
#define HcHardwareConfiguration 0x20 |
||||||
|
#define HcDMAConfiguration 0x21 |
||||||
|
#define HcTransferCounter 0x22 |
||||||
|
#define HcuPInterrupt 0x24 |
||||||
|
#define HcuPInterruptEnable 0x25 |
||||||
|
#define HcChipID 0x27 |
||||||
|
#define HcScratch 0x28 |
||||||
|
#define HcSoftwareReset 0x29 |
||||||
|
#define HcITLBufferLength 0x2A |
||||||
|
#define HcATLBufferLength 0x2B |
||||||
|
#define HcBufferStatus 0x2C |
||||||
|
#define HcReadBackITL0Length 0x2D |
||||||
|
#define HcReadBackITL1Length 0x2E |
||||||
|
#define HcITLBufferPort 0x40 |
||||||
|
#define HcATLBufferPort 0x41 |
||||||
@ -0,0 +1,150 @@ |
|||||||
|
/* |
||||||
|
* (C) Copyright 2000 |
||||||
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
||||||
|
* |
||||||
|
* See file CREDITS for list of people who contributed to this |
||||||
|
* project. |
||||||
|
* |
||||||
|
* This program is free software; you can redistribute it and/or |
||||||
|
* modify it under the terms of the GNU General Public License as |
||||||
|
* published by the Free Software Foundation; either version 2 of |
||||||
|
* the License, or (at your option) any later version. |
||||||
|
* |
||||||
|
* This program is distributed in the hope that it will be useful, |
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||||
|
* GNU General Public License for more details. |
||||||
|
* |
||||||
|
* You should have received a copy of the GNU General Public License |
||||||
|
* along with this program; if not, write to the Free Software |
||||||
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
||||||
|
* MA 02111-1307 USA |
||||||
|
*/ |
||||||
|
|
||||||
|
OUTPUT_ARCH(powerpc) |
||||||
|
SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib); |
||||||
|
/* Do we need any of these for elf? |
||||||
|
__DYNAMIC = 0; */ |
||||||
|
SECTIONS |
||||||
|
{ |
||||||
|
.resetvec 0xFFFFFFFC : |
||||||
|
{ |
||||||
|
*(.resetvec) |
||||||
|
} = 0xffff |
||||||
|
|
||||||
|
/* Read-only sections, merged into text segment: */ |
||||||
|
. = + SIZEOF_HEADERS; |
||||||
|
.interp : { *(.interp) } |
||||||
|
.hash : { *(.hash) } |
||||||
|
.dynsym : { *(.dynsym) } |
||||||
|
.dynstr : { *(.dynstr) } |
||||||
|
.rel.text : { *(.rel.text) } |
||||||
|
.rela.text : { *(.rela.text) } |
||||||
|
.rel.data : { *(.rel.data) } |
||||||
|
.rela.data : { *(.rela.data) } |
||||||
|
.rel.rodata : { *(.rel.rodata) } |
||||||
|
.rela.rodata : { *(.rela.rodata) } |
||||||
|
.rel.got : { *(.rel.got) } |
||||||
|
.rela.got : { *(.rela.got) } |
||||||
|
.rel.ctors : { *(.rel.ctors) } |
||||||
|
.rela.ctors : { *(.rela.ctors) } |
||||||
|
.rel.dtors : { *(.rel.dtors) } |
||||||
|
.rela.dtors : { *(.rela.dtors) } |
||||||
|
.rel.bss : { *(.rel.bss) } |
||||||
|
.rela.bss : { *(.rela.bss) } |
||||||
|
.rel.plt : { *(.rel.plt) } |
||||||
|
.rela.plt : { *(.rela.plt) } |
||||||
|
.init : { *(.init) } |
||||||
|
.plt : { *(.plt) } |
||||||
|
.text : |
||||||
|
{ |
||||||
|
/* WARNING - the following is hand-optimized to fit within */ |
||||||
|
/* the sector layout of our flash chips! XXX FIXME XXX */ |
||||||
|
|
||||||
|
cpu/ppc4xx/start.o (.text) |
||||||
|
board/solidcard3/init.o (.text) |
||||||
|
cpu/ppc4xx/kgdb.o (.text) |
||||||
|
cpu/ppc4xx/traps.o (.text) |
||||||
|
cpu/ppc4xx/interrupts.o (.text) |
||||||
|
cpu/ppc4xx/serial.o (.text) |
||||||
|
cpu/ppc4xx/cpu_init.o (.text) |
||||||
|
cpu/ppc4xx/speed.o (.text) |
||||||
|
common/dlmalloc.o (.text) |
||||||
|
lib_generic/crc32.o (.text) |
||||||
|
lib_ppc/extable.o (.text) |
||||||
|
lib_generic/zlib.o (.text) |
||||||
|
|
||||||
|
/* . = env_offset;*/ |
||||||
|
/* common/environment.o(.text)*/ |
||||||
|
|
||||||
|
*(.text) |
||||||
|
*(.fixup) |
||||||
|
*(.got1) |
||||||
|
} |
||||||
|
_etext = .; |
||||||
|
PROVIDE (etext = .); |
||||||
|
.rodata : |
||||||
|
{ |
||||||
|
*(.rodata) |
||||||
|
*(.rodata1) |
||||||
|
*(.rodata.str1.4) |
||||||
|
*(.eh_frame) |
||||||
|
} |
||||||
|
.fini : { *(.fini) } =0 |
||||||
|
.ctors : { *(.ctors) } |
||||||
|
.dtors : { *(.dtors) } |
||||||
|
|
||||||
|
/* Read-write section, merged into data segment: */ |
||||||
|
. = (. + 0x00FF) & 0xFFFFFF00; |
||||||
|
_erotext = .; |
||||||
|
PROVIDE (erotext = .); |
||||||
|
.reloc : |
||||||
|
{ |
||||||
|
*(.got) |
||||||
|
_GOT2_TABLE_ = .; |
||||||
|
*(.got2) |
||||||
|
_FIXUP_TABLE_ = .; |
||||||
|
*(.fixup) |
||||||
|
} |
||||||
|
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; |
||||||
|
__fixup_entries = (. - _FIXUP_TABLE_)>>2; |
||||||
|
|
||||||
|
.data : |
||||||
|
{ |
||||||
|
*(.data) |
||||||
|
*(.data1) |
||||||
|
*(.sdata) |
||||||
|
*(.sdata2) |
||||||
|
*(.dynamic) |
||||||
|
CONSTRUCTORS |
||||||
|
} |
||||||
|
_edata = .; |
||||||
|
PROVIDE (edata = .); |
||||||
|
|
||||||
|
. = .; |
||||||
|
__u_boot_cmd_start = .; |
||||||
|
.u_boot_cmd : { *(.u_boot_cmd) } |
||||||
|
__u_boot_cmd_end = .; |
||||||
|
|
||||||
|
__start___ex_table = .; |
||||||
|
__ex_table : { *(__ex_table) } |
||||||
|
__stop___ex_table = .; |
||||||
|
|
||||||
|
. = ALIGN(256); |
||||||
|
__init_begin = .; |
||||||
|
.text.init : { *(.text.init) } |
||||||
|
.data.init : { *(.data.init) } |
||||||
|
. = ALIGN(256); |
||||||
|
__init_end = .; |
||||||
|
|
||||||
|
__bss_start = .; |
||||||
|
.bss : |
||||||
|
{ |
||||||
|
*(.sbss) *(.scommon) |
||||||
|
*(.dynbss) |
||||||
|
*(.bss) |
||||||
|
*(COMMON) |
||||||
|
} |
||||||
|
_end = . ; |
||||||
|
PROVIDE (end = .); |
||||||
|
} |
||||||
@ -0,0 +1,537 @@ |
|||||||
|
/*
|
||||||
|
* (C) Copyright 2007 |
||||||
|
* Heiko Schocher, DENX Software Engineering, <hs@denx.de>. |
||||||
|
* |
||||||
|
* From: |
||||||
|
* (C) Copyright 2003 |
||||||
|
* Juergen Beisert, EuroDesign embedded technologies, jbeisert@eurodsn.de |
||||||
|
* |
||||||
|
* See file CREDITS for list of people who contributed to this |
||||||
|
* project. |
||||||
|
* |
||||||
|
* This program is free software; you can redistribute it and/or |
||||||
|
* modify it under the terms of the GNU General Public License as |
||||||
|
* published by the Free Software Foundation; either version 2 of |
||||||
|
* the License, or (at your option) any later version. |
||||||
|
* |
||||||
|
* This program is distributed in the hope that it will be useful, |
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||||
|
* GNU General Public License for more details. |
||||||
|
* |
||||||
|
* You should have received a copy of the GNU General Public License |
||||||
|
* along with this program; if not, write to the Free Software |
||||||
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
||||||
|
* MA 02111-1307 USA |
||||||
|
*/ |
||||||
|
|
||||||
|
#ifndef __CONFIG_H |
||||||
|
#define __CONFIG_H |
||||||
|
|
||||||
|
#undef USE_VGA_GRAPHICS |
||||||
|
|
||||||
|
/* Memory Map
|
||||||
|
0x00000000 .... 0x03FFFFFF -> RAM (up to 128MiB) |
||||||
|
0x74000000 .... 0x740FFFFF -> CS#6 |
||||||
|
0x74100000 .... 0x741FFFFF -> CS#7 |
||||||
|
0x74200000 .... 0x742FFFFF -> CS4# if no internal USB |
||||||
|
0x74300000 .... 0x743FFFFF -> CS5# if no boosted IDE |
||||||
|
0x77C00000 .... 0x77CFFFFF -> CS4# USB HC (1 MiB) |
||||||
|
0x77D00000 .... 0x77DFFFFF -> CS1# NAND-Flash (1 MiB) |
||||||
|
0x78000000 .... 0x78FFFFFF -> CS2# ISA-Bus Speicherzugriff (16 MiB) |
||||||
|
0x79000000 .... 0x7900FFFF -> CS2# ISA-Bus IO-Zugriff (16 MiB, mapped: 64kiB) |
||||||
|
0x79010000 .... 0x79FFFFFF -> CS2# ISA-Bus IO-Zugriff (mirrored) |
||||||
|
0x7A000000 .... 0x7A0FFFFF -> CS5# IDE emulation (1MiB) |
||||||
|
|
||||||
|
0x80000000 .... 0x9FFFFFFF -> PCI-Bus Speicherzugriff (512MiB, mapped: 1:1) |
||||||
|
0xA0000000 .... 0xBFFFFFFF -> PCI-Bus Speicherzugriff (512MiB, mapped: 0x00000000...0x1FFFFFFF) |
||||||
|
0xE8000000 .... 0xE800FFFF -> PCI-Bus IO-Zugriff (64kiB, translated to PCI: 0x0000...0xFFFF) |
||||||
|
0xE8800000 .... 0xEBFFFFFF -> PCI-Bus IO-Zugriff (56MiB, translated to PCI: 0x00800000...0x3FFFFFF) |
||||||
|
0xEED00000 .... 0xEED00003 -> PCI-Bus |
||||||
|
0xEF400000 .... 0xEF40003F -> PCI-Bus Local Configuration Registers |
||||||
|
0xEF40003F .... 0xEF5FFFFF -> reserved |
||||||
|
0xEF600000 .... 0xEFFFFFFF -> 405GP internal Devices (10 MiB) |
||||||
|
0xF0000000 .... 0xF01FFFFF -> Flash-ROM (2 MiB) |
||||||
|
0xF0200000 .... 0xF7FFFFFF -> free for flash devices |
||||||
|
0xF8000000 .... 0xF8000FFF -> OnChipMemory (4kiB) |
||||||
|
0xF8001000 .... 0xFFDFFFFF -> free for flash devices |
||||||
|
0xFFE00000 .... 0xFFFFFFFF -> BOOT-ROM (2 MiB) |
||||||
|
*/ |
||||||
|
|
||||||
|
#define CONFIG_SOLIDCARD3 1 |
||||||
|
#define CONFIG_4xx 1 |
||||||
|
#define CONFIG_405GP 1 |
||||||
|
|
||||||
|
#define CONFIG_BOARD_EARLY_INIT_F 1 |
||||||
|
|
||||||
|
/*
|
||||||
|
* define IDE_USES_ISA_EMULATION for slower IDE access in the ISA-IO address range |
||||||
|
* If undefed, IDE access uses a seperat emulation with higher access speed |
||||||
|
* Consider to inform your Linux IDE driver about the different addresses! |
||||||
|
* IDE_USES_ISA_EMULATION is only used if your CONFIG_COMMANDS macro includes the CFG_CMD_IDE macro! |
||||||
|
*/ |
||||||
|
#define IDE_USES_ISA_EMULATION |
||||||
|
|
||||||
|
/*-----------------------------------------------------------------------
|
||||||
|
* Serial Port |
||||||
|
*----------------------------------------------------------------------*/ |
||||||
|
#define CONFIG_SERIAL_MULTI |
||||||
|
#undef CONFIG_SERIAL_SOFTWARE_FIFO |
||||||
|
/*
|
||||||
|
* define CONFIG_POWER_DOWN if your cpu should power down while waiting for your input |
||||||
|
* Works only, if you have enabled the CONFIG_SERIAL_SOFTWARE_FIFO feature |
||||||
|
*/ |
||||||
|
#if CONFIG_SERIAL_SOFTWARE_FIFO |
||||||
|
#define CONFIG_POWER_DOWN |
||||||
|
#endif |
||||||
|
|
||||||
|
/*
|
||||||
|
* define CONFIG_SYS_CLK_FREQ to your base crystal clock in Hz |
||||||
|
*/ |
||||||
|
#define CONFIG_SYS_CLK_FREQ 33333333 |
||||||
|
|
||||||
|
/*
|
||||||
|
* define CONFIG_BAUDRATE to the baudrate value you want to use as default |
||||||
|
*/ |
||||||
|
#define CONFIG_BAUDRATE 115200 |
||||||
|
#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */ |
||||||
|
|
||||||
|
#define CONFIG_SILENT_CONSOLE 1 /* enable silent startup */ |
||||||
|
#define CFG_DEVICE_NULLDEV 1 /* include nulldev device */ |
||||||
|
|
||||||
|
#if 1 /* feel free to disable for development */ |
||||||
|
#define CONFIG_AUTOBOOT_KEYED /* Enable password protection */ |
||||||
|
#define CONFIG_AUTOBOOT_PROMPT "\nSC3 - booting... stop with S\n" |
||||||
|
#define CONFIG_AUTOBOOT_DELAY_STR "S" /* 1st "password" */ |
||||||
|
#endif |
||||||
|
|
||||||
|
/*
|
||||||
|
* define CONFIG_BOOTCOMMAND to the autoboot commands. They will running after |
||||||
|
* the CONFIG_BOOTDELAY delay to boot your machine |
||||||
|
*/ |
||||||
|
#define CONFIG_BOOTCOMMAND "bootp;dcache on;bootm" |
||||||
|
|
||||||
|
/*
|
||||||
|
* define CONFIG_BOOTARGS to the default kernel parameters. They will used if you don't |
||||||
|
* set different values at the u-boot prompt |
||||||
|
*/ |
||||||
|
#ifdef USE_VGA_GRAPHICS |
||||||
|
#define CONFIG_BOOTARGS "root=/dev/nfs rw ip=bootp nfsroot=/tftpboot/solidcard3re" |
||||||
|
#else |
||||||
|
#define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/nfs rw ip=bootp" |
||||||
|
#endif |
||||||
|
/*
|
||||||
|
* Is the USB host controller assembled? If yes define CONFIG_ISP1161_PRESENT |
||||||
|
* This reserves memory bank #4 for this purpose |
||||||
|
*/ |
||||||
|
#undef CONFIG_ISP1161_PRESENT |
||||||
|
|
||||||
|
#undef CONFIG_LOADS_ECHO /* no echo on for serial download */ |
||||||
|
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ |
||||||
|
|
||||||
|
#define CONFIG_NET_MULTI |
||||||
|
/* #define CONFIG_EEPRO100_SROM_WRITE */ |
||||||
|
/* #define CONFIG_SHOW_MAC */ |
||||||
|
#define CONFIG_EEPRO100 |
||||||
|
#define CONFIG_MII 1 /* add 405GP MII PHY management */ |
||||||
|
#define CONFIG_PHY_ADDR 1 /* the connected Phy defaults to address 1 */ |
||||||
|
|
||||||
|
#define CONFIG_COMMANDS \ |
||||||
|
(CONFIG_CMD_DFL | \
|
||||||
|
CFG_CMD_PCI | \
|
||||||
|
CFG_CMD_IRQ | \
|
||||||
|
CFG_CMD_NET | \
|
||||||
|
CFG_CMD_MII | \
|
||||||
|
CFG_CMD_PING | \
|
||||||
|
CFG_CMD_NAND | \
|
||||||
|
CFG_CMD_I2C | \
|
||||||
|
CFG_CMD_IDE | \
|
||||||
|
CFG_CMD_DATE | \
|
||||||
|
CFG_CMD_DHCP | \
|
||||||
|
CFG_CMD_CACHE | \
|
||||||
|
CFG_CMD_ELF ) |
||||||
|
|
||||||
|
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ |
||||||
|
#include <cmd_confdefs.h> |
||||||
|
|
||||||
|
#undef CONFIG_WATCHDOG /* watchdog disabled */ |
||||||
|
|
||||||
|
/*
|
||||||
|
* Miscellaneous configurable options |
||||||
|
*/ |
||||||
|
#define CFG_LONGHELP 1 /* undef to save memory */ |
||||||
|
#define CFG_PROMPT "SC3> " /* Monitor Command Prompt */ |
||||||
|
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ |
||||||
|
|
||||||
|
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ |
||||||
|
|
||||||
|
#define CFG_MAXARGS 16 /* max number of command args */ |
||||||
|
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ |
||||||
|
|
||||||
|
#define CFG_MEMTEST_START 0x0400000 /* memtest works on */ |
||||||
|
#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ |
||||||
|
|
||||||
|
/*
|
||||||
|
* If CFG_EXT_SERIAL_CLOCK, then the UART divisor is 1. |
||||||
|
* If CFG_405_UART_ERRATA_59, then UART divisor is 31. |
||||||
|
* Otherwise, UART divisor is determined by CPU Clock and CFG_BASE_BAUD value. |
||||||
|
* The Linux BASE_BAUD define should match this configuration. |
||||||
|
* baseBaud = cpuClock/(uartDivisor*16) |
||||||
|
* If CFG_405_UART_ERRATA_59 and 200MHz CPU clock, |
||||||
|
* set Linux BASE_BAUD to 403200. |
||||||
|
* |
||||||
|
* Consider the OPB clock! If it get lower the BASE_BAUD must be lower to |
||||||
|
* (see 405GP datasheet for descritpion) |
||||||
|
*/ |
||||||
|
#undef CFG_EXT_SERIAL_CLOCK /* external serial clock */ |
||||||
|
#undef CFG_405_UART_ERRATA_59 /* 405GP/CR Rev. D silicon */ |
||||||
|
#define CFG_BASE_BAUD 921600 /* internal clock */ |
||||||
|
|
||||||
|
/* The following table includes the supported baudrates */ |
||||||
|
#define CFG_BAUDRATE_TABLE \ |
||||||
|
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} |
||||||
|
|
||||||
|
#define CFG_LOAD_ADDR 0x1000000 /* default load address */ |
||||||
|
#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */ |
||||||
|
|
||||||
|
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ |
||||||
|
|
||||||
|
/*-----------------------------------------------------------------------
|
||||||
|
* IIC stuff |
||||||
|
*----------------------------------------------------------------------- |
||||||
|
*/ |
||||||
|
#define CONFIG_HARD_I2C /* I2C with hardware support */ |
||||||
|
#undef CONFIG_SOFT_I2C /* I2C bit-banged */ |
||||||
|
|
||||||
|
#define I2C_INIT |
||||||
|
#define I2C_ACTIVE 0 |
||||||
|
#define I2C_TRISTATE 0 |
||||||
|
|
||||||
|
#define CFG_I2C_SPEED 100000 /* use the standard 100kHz speed */ |
||||||
|
#define CFG_I2C_SLAVE 0x7F /* mask valid bits */ |
||||||
|
|
||||||
|
#define CONFIG_RTC_DS1337 |
||||||
|
#define CFG_I2C_RTC_ADDR 0x68 |
||||||
|
|
||||||
|
/*-----------------------------------------------------------------------
|
||||||
|
* PCI stuff |
||||||
|
*----------------------------------------------------------------------- |
||||||
|
*/ |
||||||
|
#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */ |
||||||
|
#define PCI_HOST_FORCE 1 /* configure as pci host */ |
||||||
|
#define PCI_HOST_AUTO 2 /* detected via arbiter enable */ |
||||||
|
|
||||||
|
#define CONFIG_PCI /* include pci support */ |
||||||
|
#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */ |
||||||
|
#define CONFIG_PCI_PNP /* do pci plug-and-play */ |
||||||
|
/* resource configuration */ |
||||||
|
|
||||||
|
/* If you want to see, whats connected to your PCI bus */ |
||||||
|
/* #define CONFIG_PCI_SCAN_SHOW */ |
||||||
|
|
||||||
|
#define CFG_PCI_SUBSYS_VENDORID 0x0000 /* PCI Vendor ID: to-do!!! */ |
||||||
|
#define CFG_PCI_SUBSYS_DEVICEID 0x0000 /* PCI Device ID: to-do!!! */ |
||||||
|
#define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */ |
||||||
|
#define CFG_PCI_PTM1MS 0x80000001 /* 2GB, enable hard-wired to 1 */ |
||||||
|
#define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */ |
||||||
|
#define CFG_PCI_PTM2LA 0x00000000 /* disabled */ |
||||||
|
#define CFG_PCI_PTM2MS 0x00000000 /* disabled */ |
||||||
|
#define CFG_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */ |
||||||
|
|
||||||
|
/*-----------------------------------------------------------------------
|
||||||
|
* External peripheral base address |
||||||
|
*----------------------------------------------------------------------- |
||||||
|
*/ |
||||||
|
#if !(CONFIG_COMMANDS & CFG_CMD_IDE) |
||||||
|
|
||||||
|
#undef CONFIG_IDE_LED /* no led for ide supported */ |
||||||
|
#undef CONFIG_IDE_RESET /* no reset for ide supported */ |
||||||
|
|
||||||
|
/*-----------------------------------------------------------------------
|
||||||
|
* IDE/ATA stuff |
||||||
|
*----------------------------------------------------------------------- |
||||||
|
*/ |
||||||
|
#else /* !(CONFIG_COMMANDS & CFG_CMD_IDE) */ |
||||||
|
#define CONFIG_START_IDE 1 /* check, if use IDE */ |
||||||
|
|
||||||
|
#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */ |
||||||
|
#undef CONFIG_IDE_LED /* no led for ide supported */ |
||||||
|
#undef CONFIG_IDE_RESET /* no reset for ide supported */ |
||||||
|
|
||||||
|
#define CONFIG_ATAPI |
||||||
|
#define CONFIG_DOS_PARTITION |
||||||
|
#define CFG_IDE_MAXDEVICE (CFG_IDE_MAXBUS*1) /* max. 1 drives per IDE bus */ |
||||||
|
|
||||||
|
#ifndef IDE_USES_ISA_EMULATION |
||||||
|
|
||||||
|
/* New and faster access */ |
||||||
|
#define CFG_ATA_BASE_ADDR 0x7A000000 /* start of ISA IO emulation */ |
||||||
|
|
||||||
|
/* How many IDE busses are available */ |
||||||
|
#define CFG_IDE_MAXBUS 1 |
||||||
|
|
||||||
|
/* What IDE ports are available */ |
||||||
|
#define CFG_ATA_IDE0_OFFSET 0x000 /* first is available */ |
||||||
|
#undef CFG_ATA_IDE1_OFFSET /* second not available */ |
||||||
|
|
||||||
|
/* access to the data port is calculated:
|
||||||
|
CFG_ATA_BASE_ADDR + CFG_ATA_IDE0_OFFSET + CFG_ATA_DATA_OFFSET + 0 */ |
||||||
|
#define CFG_ATA_DATA_OFFSET 0x0000 /* Offset for data I/O */ |
||||||
|
|
||||||
|
/* access to the registers is calculated:
|
||||||
|
CFG_ATA_BASE_ADDR + CFG_ATA_IDE0_OFFSET + CFG_ATA_REG_OFFSET + [1..7] */ |
||||||
|
#define CFG_ATA_REG_OFFSET 0x0000 /* Offset for normal register accesses */ |
||||||
|
|
||||||
|
/* access to the alternate register is calculated:
|
||||||
|
CFG_ATA_BASE_ADDR + CFG_ATA_IDE0_OFFSET + CFG_ATA_ALT_OFFSET + 6 */ |
||||||
|
#define CFG_ATA_ALT_OFFSET 0x008 /* Offset for alternate registers */ |
||||||
|
|
||||||
|
#else /* IDE_USES_ISA_EMULATION */ |
||||||
|
|
||||||
|
#define CFG_ATA_BASE_ADDR 0x79000000 /* start of ISA IO emulation */ |
||||||
|
|
||||||
|
/* How many IDE busses are available */ |
||||||
|
#define CFG_IDE_MAXBUS 1 |
||||||
|
|
||||||
|
/* What IDE ports are available */ |
||||||
|
#define CFG_ATA_IDE0_OFFSET 0x01F0 /* first is available */ |
||||||
|
#undef CFG_ATA_IDE1_OFFSET /* second not available */ |
||||||
|
|
||||||
|
/* access to the data port is calculated:
|
||||||
|
CFG_ATA_BASE_ADDR + CFG_ATA_IDE0_OFFSET + CFG_ATA_DATA_OFFSET + 0 */ |
||||||
|
#define CFG_ATA_DATA_OFFSET 0x0000 /* Offset for data I/O */ |
||||||
|
|
||||||
|
/* access to the registers is calculated:
|
||||||
|
CFG_ATA_BASE_ADDR + CFG_ATA_IDE0_OFFSET + CFG_ATA_REG_OFFSET + [1..7] */ |
||||||
|
#define CFG_ATA_REG_OFFSET 0x0000 /* Offset for normal register accesses */ |
||||||
|
|
||||||
|
/* access to the alternate register is calculated:
|
||||||
|
CFG_ATA_BASE_ADDR + CFG_ATA_IDE0_OFFSET + CFG_ATA_ALT_OFFSET + 6 */ |
||||||
|
#define CFG_ATA_ALT_OFFSET 0x03F0 /* Offset for alternate registers */ |
||||||
|
|
||||||
|
#endif /* IDE_USES_ISA_EMULATION */ |
||||||
|
|
||||||
|
#endif /* !(CONFIG_COMMANDS & CFG_CMD_IDE) */ |
||||||
|
|
||||||
|
/*
|
||||||
|
#define CFG_KEY_REG_BASE_ADDR 0xF0100000 |
||||||
|
#define CFG_IR_REG_BASE_ADDR 0xF0200000 |
||||||
|
#define CFG_FPGA_REG_BASE_ADDR 0xF0300000 |
||||||
|
*/ |
||||||
|
|
||||||
|
/*-----------------------------------------------------------------------
|
||||||
|
* Start addresses for the final memory configuration |
||||||
|
* (Set up by the startup code) |
||||||
|
* Please note that CFG_SDRAM_BASE _must_ start at 0 |
||||||
|
* |
||||||
|
* CFG_FLASH_BASE -> start address of internal flash |
||||||
|
* CFG_MONITOR_BASE -> start of u-boot |
||||||
|
*/ |
||||||
|
#ifndef __ASSEMBLER__ |
||||||
|
extern unsigned long offsetOfBigFlash; |
||||||
|
extern unsigned long offsetOfEnvironment; |
||||||
|
#endif |
||||||
|
|
||||||
|
#define CFG_SDRAM_BASE 0x00000000 |
||||||
|
#define CFG_FLASH_BASE 0xFFE00000 |
||||||
|
#define CFG_MONITOR_BASE 0xFFFC0000 /* placed last 256k */ |
||||||
|
#define CFG_MONITOR_LEN (224 * 1024) /* Reserve 224 KiB for Monitor */ |
||||||
|
#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 KiB for malloc() */ |
||||||
|
|
||||||
|
/*
|
||||||
|
* For booting Linux, the board info and command line data |
||||||
|
* have to be in the first 8 MiB of memory, since this is |
||||||
|
* the maximum mapped by the Linux kernel during initialization. |
||||||
|
*/ |
||||||
|
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ |
||||||
|
/*-----------------------------------------------------------------------
|
||||||
|
* FLASH organization ## FIXME: lookup in datasheet |
||||||
|
*/ |
||||||
|
#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ |
||||||
|
#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */ |
||||||
|
|
||||||
|
#define CFG_FLASH_CFI /* flash is CFI compat. */ |
||||||
|
#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver*/ |
||||||
|
#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector */ |
||||||
|
#define CFG_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash*/ |
||||||
|
#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ |
||||||
|
#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ |
||||||
|
|
||||||
|
#define CFG_ENV_IS_IN_FLASH 1 |
||||||
|
#if CFG_ENV_IS_IN_FLASH |
||||||
|
#define CFG_ENV_OFFSET 0x00000000 /* Offset of Environment Sector in bottom type */ |
||||||
|
#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ |
||||||
|
#define CFG_ENV_SECT_SIZE 0x4000 /* see README - env sector total size */ |
||||||
|
#endif |
||||||
|
/* let us changing anything in our environment */ |
||||||
|
#define CONFIG_ENV_OVERWRITE |
||||||
|
|
||||||
|
/*
|
||||||
|
* NAND-FLASH stuff |
||||||
|
*/ |
||||||
|
#define CFG_MAX_NAND_DEVICE 1 |
||||||
|
#define NAND_MAX_CHIPS 1 |
||||||
|
#define CFG_NAND_BASE 0x77D00000 |
||||||
|
|
||||||
|
/*-----------------------------------------------------------------------
|
||||||
|
* Cache Configuration |
||||||
|
* |
||||||
|
* CFG_DCACHE_SIZE -> size of data cache: |
||||||
|
* - 405GP 8k |
||||||
|
* - 405GPr 16k |
||||||
|
* How to handle the difference in chache size? |
||||||
|
* CFG_CACHELINE_SIZE -> size of one cache line: 32 bytes |
||||||
|
* (used in cpu/ppc4xx/start.S) |
||||||
|
*/ |
||||||
|
#define CFG_DCACHE_SIZE 16384 |
||||||
|
|
||||||
|
#define CFG_CACHELINE_SIZE 32 |
||||||
|
|
||||||
|
#if (CONFIG_COMMANDS & CFG_CMD_KGDB) |
||||||
|
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ |
||||||
|
#endif |
||||||
|
|
||||||
|
/*
|
||||||
|
* Init Memory Controller: |
||||||
|
* |
||||||
|
*/ |
||||||
|
|
||||||
|
#define FLASH_BASE0_PRELIM CFG_FLASH_BASE |
||||||
|
#define FLASH_BASE1_PRELIM 0 |
||||||
|
|
||||||
|
/*-----------------------------------------------------------------------
|
||||||
|
* Some informations about the internal SRAM (OCM=On Chip Memory) |
||||||
|
* |
||||||
|
* CFG_OCM_DATA_ADDR -> location |
||||||
|
* CFG_OCM_DATA_SIZE -> size |
||||||
|
*/ |
||||||
|
|
||||||
|
#define CFG_TEMP_STACK_OCM 1 |
||||||
|
#define CFG_OCM_DATA_ADDR 0xF8000000 |
||||||
|
#define CFG_OCM_DATA_SIZE 0x1000 |
||||||
|
|
||||||
|
/*-----------------------------------------------------------------------
|
||||||
|
* Definitions for initial stack pointer and data area (in DPRAM): |
||||||
|
* - we are using the internal 4k SRAM, so we don't need data cache mapping |
||||||
|
* - internal SRAM (OCM=On Chip Memory) is placed to CFG_OCM_DATA_ADDR |
||||||
|
* - Stackpointer will be located to |
||||||
|
* (CFG_INIT_RAM_ADDR&0xFFFF0000) | (CFG_INIT_SP_OFFSET&0x0000FFFF) |
||||||
|
* in cpu/ppc4xx/start.S |
||||||
|
*/ |
||||||
|
|
||||||
|
#undef CFG_INIT_DCACHE_CS |
||||||
|
/* Where the internal SRAM starts */ |
||||||
|
#define CFG_INIT_RAM_ADDR CFG_OCM_DATA_ADDR |
||||||
|
/* Where the internal SRAM ends (only offset) */ |
||||||
|
#define CFG_INIT_RAM_END 0x0F00 |
||||||
|
|
||||||
|
/*
|
||||||
|
|
||||||
|
CFG_INIT_RAM_ADDR ------> ------------ lower address |
||||||
|
| | |
||||||
|
| ^ | |
||||||
|
| | | |
||||||
|
| | Stack | |
||||||
|
CFG_GBL_DATA_OFFSET ----> ------------ |
||||||
|
| | |
||||||
|
| 64 Bytes | |
||||||
|
| | |
||||||
|
CFG_INIT_RAM_END ------> ------------ higher address |
||||||
|
(offset only) |
||||||
|
|
||||||
|
*/ |
||||||
|
/* size in bytes reserved for initial data */ |
||||||
|
#define CFG_GBL_DATA_SIZE 64 |
||||||
|
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) |
||||||
|
/* Initial value of the stack pointern in internal SRAM */ |
||||||
|
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET |
||||||
|
|
||||||
|
/*
|
||||||
|
* Internal Definitions |
||||||
|
* |
||||||
|
* Boot Flags |
||||||
|
*/ |
||||||
|
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ |
||||||
|
#define BOOTFLAG_WARM 0x02 /* Software reboot */ |
||||||
|
|
||||||
|
/* ################################################################################### */ |
||||||
|
/* These defines will be used in cpu/ppc4xx/cpu_init.c to setup external chip selects */ |
||||||
|
/* They are currently undefined cause they are initiaized in board/solidcard3/init.S */ |
||||||
|
|
||||||
|
/* This chip select accesses the boot device */ |
||||||
|
/* It depends on boot select switch if this device is 16 or 8 bit */ |
||||||
|
|
||||||
|
#undef CFG_EBC_PB0AP |
||||||
|
#undef CFG_EBC_PB0CR |
||||||
|
|
||||||
|
#undef CFG_EBC_PB1AP |
||||||
|
#undef CFG_EBC_PB1CR |
||||||
|
|
||||||
|
#undef CFG_EBC_PB2AP |
||||||
|
#undef CFG_EBC_PB2CR |
||||||
|
|
||||||
|
#undef CFG_EBC_PB3AP |
||||||
|
#undef CFG_EBC_PB3CR |
||||||
|
|
||||||
|
#undef CFG_EBC_PB4AP |
||||||
|
#undef CFG_EBC_PB4CR |
||||||
|
|
||||||
|
#undef CFG_EBC_PB5AP |
||||||
|
#undef CFG_EBC_PB5CR |
||||||
|
|
||||||
|
#undef CFG_EBC_PB6AP |
||||||
|
#undef CFG_EBC_PB6CR |
||||||
|
|
||||||
|
#undef CFG_EBC_PB7AP |
||||||
|
#undef CFG_EBC_PB7CR |
||||||
|
|
||||||
|
#define CONFIG_SDRAM_BANK0 /* use the standard SDRAM initialization */ |
||||||
|
#undef CONFIG_SPD_EEPROM |
||||||
|
|
||||||
|
/*
|
||||||
|
* Define this to get more information about system configuration |
||||||
|
*/ |
||||||
|
/* #define SC3_DEBUGOUT */ |
||||||
|
#undef SC3_DEBUGOUT |
||||||
|
|
||||||
|
/***********************************************************************
|
||||||
|
* External peripheral base address |
||||||
|
***********************************************************************/ |
||||||
|
|
||||||
|
#define CFG_ISA_MEM_BASE_ADDRESS 0x78000000 |
||||||
|
/*
|
||||||
|
Die Grafik-Treiber greifen über die Adresse in diesem Macro auf den Chip zu. |
||||||
|
Das funktioniert bei deren Karten, weil sie eine PCI-Bridge benutzen, die |
||||||
|
das gleiche Mapping durchführen kann, wie der SC520 (also Aufteilen von IO-Zugriffen |
||||||
|
auf ISA- und PCI-Zyklen) |
||||||
|
*/ |
||||||
|
#define CFG_ISA_IO_BASE_ADDRESS 0xE8000000 |
||||||
|
/*#define CFG_ISA_IO_BASE_ADDRESS 0x79000000 */ |
||||||
|
|
||||||
|
/************************************************************
|
||||||
|
* Video support |
||||||
|
************************************************************/ |
||||||
|
|
||||||
|
#ifdef USE_VGA_GRAPHICS |
||||||
|
#define CONFIG_VIDEO /* To enable video controller support */ |
||||||
|
#define CONFIG_VIDEO_CT69000 |
||||||
|
#define CONFIG_CFB_CONSOLE |
||||||
|
/* #define CONFIG_VIDEO_LOGO */ |
||||||
|
#define CONFIG_VGA_AS_SINGLE_DEVICE |
||||||
|
#define CONFIG_VIDEO_SW_CURSOR |
||||||
|
/* #define CONFIG_VIDEO_HW_CURSOR */ |
||||||
|
#define CONFIG_VIDEO_ONBOARD /* Video controller is on-board */ |
||||||
|
|
||||||
|
#define VIDEO_HW_RECTFILL |
||||||
|
#define VIDEO_HW_BITBLT |
||||||
|
|
||||||
|
#endif |
||||||
|
|
||||||
|
/************************************************************
|
||||||
|
* Ident |
||||||
|
************************************************************/ |
||||||
|
#define CONFIG_SC3_VERSION "r1.4" |
||||||
|
|
||||||
|
#define POST_OUT(x) (*((volatile unsigned char*)(0x79000080))=x) |
||||||
|
|
||||||
|
#endif /* __CONFIG_H */ |
||||||
Loading…
Reference in new issue