Cleanup config file and bootup output for Yucca board.

CHANGELOG

@@ -2,6 +2,8 @@
 Changes since U-Boot 1.1.4:
 ======================================================================
 
+* Cleanup config file and bootup output for Yucca board.
+
 * Fix CONFIG_440_GX define usage.
 
 * Remove autogenerated bmp_logo.h file.

board/amcc/yucca/yucca.c

@@ -541,18 +541,15 @@ int board_early_init_f (void)
 
 int checkboard (void)
 {
-	sys_info_t sysinfo;
-
-	get_sys_info (&sysinfo);
-
-	printf ("Board: AMCC 440SPe Evaluation Board\n");
-	printf ("\tVCO: %lu MHz\n", sysinfo.freqVCOMhz / 1000000);
-	printf ("\tCPU: %lu MHz\n", sysinfo.freqProcessor / 1000000);
-	printf ("\tPLB: %lu MHz\n", sysinfo.freqPLB / 1000000);
-	printf ("\tOPB: %lu MHz\n", sysinfo.freqOPB / 1000000);
-	printf ("\tEPB: %lu MHz\n", sysinfo.freqEPB / 1000000);
-	printf ("\tPCI: %lu MHz\n", sysinfo.freqPCI / 1000000);
-	printf ("\tDDR: %lu MHz\n", sysinfo.freqDDR / 1000000);
+	char *s = getenv("serial#");
+
+	printf("Board: Yucca - AMCC 440SPe Evaluation Board");
+	if (s != NULL) {
+		puts(", serial# ");
+		puts(s);
+	}
+	putc('\n');
+
 	return 0;
 }
 

cpu/ppc4xx/cpu.c

@@ -253,11 +253,13 @@ int checkcpu (void)
 		break;
 
 	case PVR_440SPe_RA:
-		puts("SPe 3GA533C");
+		puts("SPe Rev. A");
 		break;
+
 	case PVR_440SPe_RB:
-		puts("SPe 3GB533C");
+		puts("SPe Rev. B");
 		break;
+
 	default:
 		printf (" UNKNOWN (PVR=%08x)", pvr);
 		break;

include/asm-ppc/processor.h

@@ -736,7 +736,7 @@
 #define PVR_440SP_RA	0x53221850
 #define PVR_440SP_RB	0x53221891
 #define PVR_440SPe_RA	0x53421890
-#define PVR_440SPe_RB	0x53521891
+#define PVR_440SPe_RB	0x53421891
 #define PVR_601		0x00010000
 #define PVR_602		0x00050000
 #define PVR_603		0x00030000

include/configs/yucca.h

@@ -34,7 +34,6 @@
 #define DEBUG
 #undef DEBUG
 
-#define	 CONFIG_IDENT_STRING "\nU_440SPe_V1R01 level06"
 /*-----------------------------------------------------------------------
  * High Level Configuration Options
  *----------------------------------------------------------------------*/
@@ -192,7 +191,7 @@
 	"ramdisk_addr=E7F20000\0"					\
 	"load=tftp 100000 yuca/u-boot.bin\0"				\
 	"update=protect off 2:4-7;era 2:4-7;"				\
-		"cp.b ${fileaddr} fffc0000 ${filesize};"		\
+		"cp.b ${fileaddr} FFFB0000 ${filesize};"		\
 		"setenv filesize;saveenv\0"				\
 	"upd=run load;run update\0"					\
 	""
@@ -267,7 +266,7 @@
 /* General PCI */
 #define CONFIG_PCI			/* include pci support		*/
 #define CONFIG_PCI_PNP		1	/* do pci plug-and-play		*/
-#define CONFIG_PCI_SCAN_SHOW	i	/* show pci devices on startup	*/
+#define CONFIG_PCI_SCAN_SHOW	1	/* show pci devices on startup	*/
 #undef CONFIG_PCI_CONFIG_HOST_BRIDGE
 
 /* Board-specific PCI */