upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support

You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

Chen-Yu Tsai 32f67bb7a1 sunxi: Enable eMMC on Libre Computer Board ALL-H3-CC boards ... The Libretech ALL-H3-CC has a high density connector for attaching an eMMC module. The module form factor and connection is specific to Libretech, and has provisions for split vmmc/vqmmc (core and I/O) voltage supplies, but this board does not wire the vqmmc side. The H2+/H3/H5 SoCs do not support alternate I/O voltages for eMMC either. Only 3.3V is supported. A specific module that ties vqmmc to vmmc, with both at 3.3V, must be used. Given that a) eMMC is not designed to be hotplugged, b) power is always provided on the pins, and c) MMC controllers can deal with missing cards, we can enable this by default. If a module is attached it will be picked up by the system. The device tree change was also submitted to the Linux Kernel and has already been queued up for 4.19. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@openedev.com>		6 years ago
..
cpu	Merge branch 'master' of git://git.denx.de/u-boot-sunxi	6 years ago
dts	sunxi: Enable eMMC on Libre Computer Board ALL-H3-CC boards	6 years ago
include	sunxi: R40: add gigabit ethernet clocks	6 years ago
lib	…
mach-aspeed	…
mach-at91	…
mach-bcm283x	…
mach-bcmstb	board: arm: Add support for Broadcom BCM7445	6 years ago
mach-davinci	…
mach-exynos	…
mach-highbank	…
mach-imx	…
mach-integrator	…
mach-keystone	…
mach-kirkwood	…
mach-meson	…
mach-mvebu	…
mach-omap2	…
mach-orion5x	…
mach-owl	board: Add uCRobotics Bubblegum-96 board support	6 years ago
mach-qemu	…
mach-rmobile	…
mach-rockchip	…
mach-s5pc1xx	…
mach-snapdragon	…
mach-socfpga	Merge branch 'master' of git://git.denx.de/u-boot-socfpga	6 years ago
mach-sti	…
mach-stm32	mach-stm32: Rename CONFIG_SPL_RESET_SUPPORT to CONFIG_SPL_DM_RESET	6 years ago
mach-stm32mp	reset: Rename CONFIG_SPL_RESET_SUPPORT to CONFIG_SPL_DM_RESET	6 years ago
mach-sunxi	dm: sunxi: Use DM for MMC and SATA on all A10 boards	6 years ago
mach-tegra	…
mach-uniphier	…
mach-versatile	…
mach-zynq	…
mach-zynqmp-r5	…
thumb1/include/asm/proc-armv	…
Kconfig	arm: socfpga: stratix10: Enable Stratix10 SoC build	6 years ago
Kconfig.debug	…
Makefile	board: arm: Add support for Broadcom BCM7445	6 years ago
config.mk	…